Homeopathic ligand-free palladium as a catalyst in the heck reaction. A comparison with a palladacycle

[reaction: see text] Ligand-free Pd(OAc)(2) can be used as a catalyst in the Heck reaction of aryl bromides as long as the amount of catalyst is kept between 0.01 and 0.1 mol %. At higher concentrations palladium black forms and the reaction stops. The actual catalyst is monomeric. Palladacycles merely serve as a source of ligand-free palladium in Heck reactions of aryl bromides.     

Suzuki Reaction of Aryl Bromides Using a Phosphine-Free Magnetic Nanoparticle-Supported Palladium Catalyst

A palladium catalyst immobilized on superparaganetic nanoparticles was prepared with a palladium loading of 0.30 mmol/g. The catalyst was characterized using X-ray diffraction, scanning electron microscopy, transmission electron microscopy, vibrating sample magnetometry, thermogravimetric analysis, Fourier transform infrared, atomic absorption spectrophotometry, and nitrogen adsorption. The immobilized palladium catalyst was an efficient catalyst without added phosphine ligands for the Suzuki cross-coupling reaction of several aryl bromides with phenylboronic acid. The recovery of catalyst was simply by magnetic decantation in the presence of a magnet. The immobilized palladium catalyst can be reused many times without significant degradation in catalytic activity. No leaching of active palladium species into the reaction solution was detected.     

First palladium-catalyzed Heck reactions with efficient colloidal catalyst systems

For the first time it has been shown that palladium colloids are effective and active catalysts for the olefination of aryl bromides (Heck reaction). Worthy of note are the high activities of the catalyst system for activated aryl bromides under optimized reaction conditions, which are better than or comparable with “classical” palladium phosphine complexes. Addition of phosphines strongly retards the reaction rate of the colloid catalyst. Nevertheless, this type of catalyst is not suitable for the activation of non-activated substrates, especially technically interesting aryl chlorides.     

无配体Pd/LDH-F催化剂在Heck和Suzuki反应中的应用

 以氟离子插层的水滑石LDH-F为载体,用逐滴浸渍法制备了新型Pd/LDH-F催化剂,并用其催化溴代芳烃的Heck和Suzuki偶联反应. 用X射线衍射表征了催化剂的晶相,以等离子体发射光谱测定了溶剂中钯的流失量. 结果表明,对于Heck反应,在无配体存在和低钯用量(Pd/溴代芳烃摩尔比为0.001)的情况下, Pd/LDH-F的催化性能优于其它载体负载的Pd催化剂,显示出很高的催化活性和选择性. 在140 ℃和12 h的条件下, Pd/LDH-F催化溴苯与苯乙烯Heck反应产物的收率可达86％, 反应后催化剂经过分离,可循环使用四次其催化活性基本不变. 在DMF/水摩尔比为0.5的混合溶剂中,在室温和3 h 的条件下, Pd/LDH-F (Pd/溴代芳烃摩尔比为0.005)催化溴苯与苯基硼酸盐的Suzuki反应中,目标产物收率为99%.     

钯催化偶联-消去法合成芳基末端炔的研究进展

钯催化偶联-消去法合成芳基末端炔的研究进展;芳炔;偶联反应;钯催化剂;合成;综述     

木质素负载钯催化剂的制备及对Heck反应的催化性能

以天然木质素和PdC l2为原料,合成了木质素负载钯催化剂,用IR、XPS、TG、DTA等对其进行了表征.研究表明,该催化剂在空气氛围中能催化丙烯酸与芳基碘的Heck反应,并有一定的重复使用性能.     

Silica‐supported terpyridine palladium(II) complex as an efficient and reusable catalyst for Heck and Suzuki cross‐coupling reactions

Silica‐supported terpyridine palladium(II) was prepared and used as an effective and recyclable catalyst in Mizoroki–Heck and Suzuki–Miyaura coupling reactions. The catalyst was very effective for the Mizoroki–Heck reaction of aryl halides with olefins and conversion was in most cases excellent. The catalyst showed good thermal stability (up to 230 °C) and could be recovered and reused for four reaction cycles. The Suzuki coupling of aryl iodides with aryl boronic acids in the presence of the catalyst was also investigated and the reaction proceeded with a short reaction time and excellent conversion. Copyright © 2013 John Wiley & Sons, Ltd.     

果胶负载钯催化剂的制备及Suzuki反应催化性能

以柑橘皮果胶为载体,采用吸附法制备了果胶负载钯催化剂,并将其应用于四苯硼钠与溴代芳烃的交叉偶联反应中.该反应体系以聚乙二醇400(PEG 400)/H2O为反应溶剂,三乙胺为碱,在空气中于110℃反应15~60 min,四苯硼钠中4个苯基均可顺利参与反应,高产率地获得相应的目标化合物.该方法具有条件温和、反应时间短、收率高且催化剂可循环利用等优点.     

Guanidine‐Functionalized Resin‐Supported Pd(0) Catalyst: Activity,Reusability, and Redeposition of Active Pd Species in Heck Vinylation

The guanidine‐functionalized resin‐supported Pd(0) catalyst [GDR·Pd(0)] is highly active in Heck reaction of aryl bromides with acrylic acid or styrene without the need to exclude air. The catalyst can be recycled at least 9 times without significant loss of activity in N‐methyl‐2‐pyrrolidone at 140 °C. The Heck reaction proceeds homogeneously with dissolved palladium species and the dissolved active palladium species can redeposit onto the surface of catalyst in the reaction. The XRD peak shifting of Pd phases in the catalyst provides the evidence for the re‐deposition of the active palladium species.     

Use of polymer-supported dialkylphosphinobiphenyl ligands for palladium-catalyzed amination and Suzuki reactions

The preparations of polymer-supported dialkylphosphinobiphenyl ligands (3) are reported. A palladium catalyst based on ligand 3a is active for amination and Suzuki reactions using unactivated aryl iodides, bromides, or chlorides. Filtration of the catalyst from the reaction mixture allows for simplified product isolation via an aqueous workup. The resin-bound catalyst can be recycled without additional palladium in both the amination and Suzuki reactions.     

Palladium/phosphite catalyst systems for efficient cross coupling of aryl bromides and chlorides with phenylboronic acid

The Suzuki reaction of aryl bromides is efficiently catalyzed by palladium/ phosphite complexes generated in situ. The influence of ligand, base, and different additives is examined. The process tolerates various functional groups and catalyst turnover numbers up to 820,000 are obtained even with deactivated aryl bromides. For the first time it is shown that palladium/phosphite complexes also catalyze efficiently the Suzuki reaction of aryl chlorides.     

Magnetically separable Pd catalyst for carbonylative Sonogashira coupling reactions for the synthesis of alpha,beta-alkynyl ketones

A magnetically separable palladium catalyst was simply synthesized through a wet impregnation incorporating palladium nanoparticles and superparamagnetic Fe3O4 nanoparticles in KBH4 solution, which is a highly efficient catalyst for the carbonylative Sonogashira coupling reaction of aryl iodides with terminal alkynes under phosphine-free conditions. This catalyst is completely magnetically recoverable due to the super paramagnetic behavior of Fe3O4 and can be reused with sustained selectivity and activity.     

Silica–acetylacetone‐supported palladium nanoparticles as an efficient and reusable catalyst in the Heck–Mizoroki C–C cross‐coupling reaction

The preparation of palladium nanoparticles supported on acetylacetone‐modified silica gel and their catalytic application for Heck olefination of aryl halides were investigated. The catalyst was characterized using X‐ray diffraction, X‐ray photoelectron spectroscopy, and transmission and scanning electron microscopies. The supported palladium nanoparticles are demonstrated to be a highly active and reusable catalyst for the Heck reaction. Several reaction parameters, including type and amount of solvent and base, were evaluated. The heterogeneity of the catalytic system was investigated with results indicating that there is a slight palladium leaching into the reaction solution under the applied reaction conditions. Despite this metal leaching, the catalyst can be reused nine times without significant loss of catalytic activity. Copyright © 2015 John Wiley & Sons, Ltd.     

Heterogeneous Suzuki and Stille coupling reactions using highly efficient palladium(0) immobilized MCM-41 catalyst

An efficient palladium(0) immobilized MCM-41 catalytic system for C-C cross-coupling reaction has been developed. Ligand-free Pd(0)-MCM-41 catalyst can be successfully used in coupling reaction between various aryl halides including deactivated chlorobenzene with aryl borane and organotin to give biaryls in excellent yields with high turnover frequency (TOF) (the maximal TOFs are up to 6990 for the reaction of bromobenzene with phenylboronic acid). The catalyst can be recycled and reused without any loss of catalytic activity.     

Transition metal catalyzed cross-coupling of aryl Grignard reagents with aryl fluorides via Pd- or Ni-activation of the C-F bond: an efficient synthesis of unsymmetrical biaryls - application of microwave technology in ligand and catalyst screening

Biaryl compounds are prevalent in both nature and in active pharmaceutical ingredients. The palladium and nickel catalyzed cross-coupling of aryl Grignard reagents with aryl fluorides reported herein affords moderate to excellent yields of the corresponding unsymmetrical biaryls. In addition, the first example of a biaryl cross-coupling utilizing unactivated aryl fluorides under phosphine free palladium conditions is reported. Microwave technology allowed rapid optimization of catalyst systems, which identified several ligands for this cross-coupling reaction.     

Stabilized well-dispersed Pd(0) nanoparticles for aminocarbonylation of aryl halides

Well-dispersed palladium (0) nanoparticles stabilized with phosphonium based ionic liquid were synthesized conveniently and fully characterized. A catalyst system comprising of the Pd(0) nanoparticles and a base was found to be recyclable and efficient for the aminocarbonylation reaction of aryl iodide in ionic liquid media. In the presence of potassium tert-butyloxide, for the relatively stable aryl chloride and bromide substrates, medium activities were achieved for the catalyst. The catalyst composites can be recycled at least five times with sustained activity.     

The first MCM-41-supported thioether palladium(0) complex: A highly active and stereoselective catalyst for Heck arylation of olefins with aryl halides

The first MCM-41-supported thioether palladium(0) complex has been synthesized from 3-(2-cyanoethylsulfanyl)propyltriethoxysilane via immobilization on MCM-41, followed by reacting with palladium chloride, and then the reduction with hydrazine hydrate. It was found that this complex has not only high activity and stereoselectivity for arylation reaction of conjugated alkenes with aryl iodides or activated aryl bromides, but also can efficiently catalyze the arylation reaction of conjugated alkenes with unactivated bromoarenes. This polymeric palladium catalyst can be easily recovered from the products and reused at least 10 times without loss of activity.     

田菁胶负载钯催化Heck反应的研究

通过较简单的方法合成了田菁胶负载钯化合物,利用XPS、IR、TG、DTA和TEM等手段对其进行了表征.该化合物在空气氛围中就能很好地催化丙烯酸、苯乙烯和丙烯酰胺与芳基碘的Heck反应,高产率(≥85 % )且立体选择性地生成取代的反式肉桂酸、1,2- 二苯乙烯和肉桂酰胺.化合物具有较好的重复使用性能.催化剂中起催化作用的是金属态的钯.     

交联木质素负载钯催化剂的制备及对Heck反应的催化性能研究

以天然木质素为原料, 用甲醛对其进行交联得到了交联木质素, 通过简单的方法合成了负载钯催化剂, 用XPS、 TG、 DTA等对其进行了表征. 该催化剂在空气氛围中能很好的催化乙烯基化合物与芳基碘的Heck反应. 如在较低的温度下(40 ℃)催化丙烯酸与碘苯的反应, 产率高达73.7%, 显示了较高的催化活性. 该催化剂重复使用5次, 产率仍高达90%, 显示该催化剂有良好的重复使用性能.     

Biaryl formation from 5-(2-bromobenzyl)-substituted piperidin-2-ones via palladacycles

The reaction of piperdin-2-ones with a 2-bromobenzyl substituent in the 5-position in the presence of a palladium catalyst leads to biaryl compounds. Their formation can be explained via initial C-H insertion of the aryl palladium species into the allylic C-H bond of the piperidinone. This eventually leads to a metallacycle containing Pd(II) that inserts another aryl bromide, promoting the formation of the biaryl bond.