Evaluating the performances of decision-making units based on interval efficiencies

Efficiency could be not only the ratio of weighted sum of outputs to that of inputs but also that of weighted sum of inputs to that of outputs. When the previous efficiency measures the best relative efficiency within the range of no more than one, the decision-making units (DMUs) who get the optimum value of one perform best among all the DMUs. If the previous efficiency is measured within the range of no less than one, the DMUs who get the optimum value of one perform worst among all the DMUs. When the later efficiency is measured within the range of no more than one, the DMUs who get the optimum value of one perform worst among all the DMUs. If the later efficiency is measured within the range of no less than one, the DMUs who get the optimum value of one perform best among all the DMUs. This paper mainly studies an interval DEA model with later efficiency, in which efficiency is measured within the range of an interval, whose upper bound is set to one and the lower bound is determined by introducing a virtual ideal DMU, whose performance is definitely superior to any DMUs. The efficiencies, obtained from interval DEA model, turn out to be all intervals and are referred to as interval efficiencies, which combine the best and the worst relative efficiency in a reasonable manner to give an overall assessment of performances for all DMUs. Assessor's preference information on input and output weights is also incorporated into interval DEA model reasonably and conveniently. Through an example, some differences are found from the ranking results obtained from interval DEA model and bounded DEA model using the Hurwicz criterion approach to rank the interval efficiencies.     

决策单元的投影问题研究

在传统的DEA模型中,不论是最优相对效率模型或者最差相对效率模型,它们研究投影问题都是在不同的约束域内进行的,得出的结论都有一定的片面性.在bounded DEA模型中,决策单元的效率计算是在一个区间内进行的,可以同时研究非DEA有效的决策单元在有效前沿面上的投影和非DEA无效的决策单元在DEA无效面上的投影,得出的结论更加科学合理,并以定理的形式给出了投影结果的表达式.通过一个实例将投影结果与传统模型中得出的投影结果进行了比较,发现bounded DEA模型得到的投影结果对实际的生产具有更强的指导意义.     

Interval DEA模型中决策单元的投影问题

在传统的DEA模型中,最优相对效率模型是在不大于1的范围内研究决策单元的效率的,最差相对效率模型是在不小于1的范围内研究决策单元的效率,这两种模型在研究投影问题时,是在不同的范围内进行的,有一定的片面性.将在interval DEA模型中,研究决策单元的投影问题,该模型是在相同的约束域内研究最优和最差相对效率模型,得出的结论将更加全面,通过两个定理给出了非DEA有效的决策单元在DEA有效面上的投影表达式和非DEA无效的决策单元在DEA无效面上的投影表达式.同时,通过一个实例对决策单元在interval DEA模型中的投影结果与在传统的DEA模型的投影结果进行了比较,发现投影结果比传统模型得到的投影结果对实际的生产有更强的指导意义.     

The interval efficiency based on the optimistic and pessimistic points of view

Data envelopment analysis (DEA) is a data-oriented approach for evaluating the performances of a set of peer entities called decision-making units (DMUs), whose performance is determined based on multiple measures. The traditional DEA, which is based on the concept of efficiency frontier (output frontier), determines the best efficiency score that can be assigned to each DMU. Based on these scores, DMUs are classified into DEA-efficient (optimistic efficient) or DEA-non-efficient (optimistic non-efficient) units, and the DEA-efficient DMUs determine the efficiency frontier. There is a comparable approach which uses the concept of inefficiency frontier (input frontier) for determining the worst relative efficiency score that can be assigned to each DMU. DMUs on the inefficiency frontier are specified as DEA-inefficient or pessimistic inefficient, and those that do not lie on the inefficient frontier, are declared to be DEA-non-inefficient or pessimistic non-inefficient. In this paper, we argue that both relative efficiencies should be considered simultaneously, and any approach that considers only one of them will be biased. For measuring the overall performance of the DMUs, we propose to integrate both efficiencies in the form of an interval, and we call the proposed DEA models for efficiency measurement the bounded DEA models. In this way, the efficiency interval provides the decision maker with all the possible values of efficiency, which reflect various perspectives. A numerical example is presented to illustrate the application of the proposed DEA models.     

Measurement of the worst practice of decision-making units in the presence of non-discretionary factors and imprecise data

The objective of the present paper is to propose a novel pair of data envelopment analysis (DEA) models for measurement of relative efficiencies of decision-making units (DMUs) in the presence of non-discretionary factors and imprecise data. Compared to traditional DEA, the proposed interval DEA approach measures the efficiency of each DMU relative to the inefficiency frontier, also called the input frontier, and is called the worst relative efficiency or pessimistic efficiency. On the other hand, in traditional DEA, the efficiency of each DMU is measured relative to the efficiency frontier and is called the best relative efficiency or optimistic efficiency. The pair of proposed interval DEA models takes into account the crisp, ordinal, and interval data, as well as non-discretionary factors, simultaneously for measurement of relative efficiencies of DMUs. Two numeric examples will be provided to illustrate the applicability of the interval DEA models.     

Overall performance evaluation: new bounded DEA models against unreachability of efficiency

Data envelopment analysis (DEA) performance evaluation can be implemented from either optimistic or pessimistic perspectives. For an overall performance evaluation from both perspectives, bounded DEA models are introduced to evaluate decision making units (DMUs) in terms of interval efficiencies. This paper reveals unreachability of efficiency and distortion of frontiers associated with the existing bounded DEA models. New bounded DEA models against these problems are proposed by integrating the archetypal optimistic and pessimistic DEA models into a model with bounded efficiency. It provides a new way of deriving empirical estimates of efficiency frontiers in tune with that identified by the archetypal models. Without distortion of frontiers, all DMUs reach interval efficiencies in accordance with that determined by the archetypal models. A unified evaluation and classification result is derived and the efficiency relationships between DMUs are preserved. It is shown that the newly proposed models are more reliable for overall performance evaluation in practice, as illustrated empirically by two examples.     

Finding the efficiency score and RTS characteristic of DMUs by means of identifying the efficient frontier in DEA

Data envelopment analysis (DEA) is basically a linear programming based technique used for measuring the relative performance of organizational units, referred to as decision-making units (DMUs), where the presence of multiple inputs and outputs makes comparisons difficult. The ability of identifying frontier DMUs prior to the DEA calculation is of extreme importance to an effective and efficient DEA computation. In this paper, a method for identifying the efficient frontier is introduced. Then, the efficiency score and returns to scale (RTS) characteristic of DMUs will be produced by means of the equation of efficient frontier.     

Interval efficiency measures in data envelopment analysis with imprecise data

The conventional data envelopment analysis (DEA) measures the relative efficiencies of a set of decision making units (DMUs) with exact values of inputs and outputs. For imprecise data, i.e., mixtures of interval data and ordinal data, some methods have been developed to calculate the upper bound of the efficiency scores. This paper constructs a pair of two-level mathematical programming models, whose objective values represent the lower bound and upper bound of the efficiency scores, respectively. Based on the concept of productive efficiency and the application of a variable substitution technique, the pair of two-level nonlinear programs is transformed to a pair of ordinary one-level linear programs. Solving the associated pairs of linear programs produces the efficiency intervals of all DMUs. An illustrative example verifies the idea of this paper. A real case is also provided to give some interpretation of the interval efficiency. Interval efficiency not only describes the real situation in better detail; psychologically, it also eases the tension of the DMUs being evaluated as well as the persons conducting the evaluation.     

Interval cross efficiency for fully ranking decision making units using DEA/AHP approach

Data envelopment analysis (DEA) is a popular technique for measuring the relative efficiency of a set of decision making units (DMUs). Fully ranking DMUs is a traditional and important topic in DEA. In various types of ranking methods, cross efficiency method receives much attention from researchers because it evaluates DMUs by using self and peer evaluation. However, cross efficiency score is usual nonuniqueness. This paper combines the DEA and analytic hierarchy process (AHP) to fully rank the DMUs that considers all possible cross efficiencies of a DMU with respect to all the other DMUs. We firstly measure the interval cross efficiency of each DMU. Based on the interval cross efficiency, relative efficiency pairwise comparison between each pair of DMUs is used to construct interval multiplicative preference relations (IMPRs). To obtain the consistency ranking order, a method to derive consistent IMPRs is developed. After that, the full ranking order of DMUs from completely consistent IMPRs is derived. It is worth noting that our DEA/AHP approach not only avoids overestimation of DMUs’ efficiency by only self-evaluation, but also eliminates the subjectivity of pairwise comparison between DMUs in AHP. Finally, a real example is offered to illustrate the feasibility and practicality of the proposed procedure.     

Efficiency bounds and efficiency classifications in DEA with imprecise data

This paper is concerned with the use of imprecise data in data envelopment analysis (DEA). Imprecise data means that some data are known only to the extent that the true values lie within prescribed bounds while other data are known only in terms of ordinal relations. Imprecise data envelopment analysis (IDEA) has been developed to measure the relative efficiency of decision-making units (DMUs) whose input and/or output data are imprecise. In this paper, we show two distinct strategies to arrive at an upper and lower bound of efficiency that the evaluated DMU can have within the given imprecise data. The optimistic strategy pursues the best score among various possible scores of efficiency and the conservative strategy seeks the worst score. In doing so, we do not limit our attention to the treatment of special forms of imprecise data only, as done in some of the studies associated with IDEA. We target how to deal with imprecise data in a more general form and, under this circumstance, we make it possible to grasp an upper and lower bound of efficiency. The generalized method we develop in this paper also gives rise to a new scheme of efficiency classifications that is more detailed and informative than the standard efficient and inefficient partition.     

基于公共权重的区间DEA效率评价及其排序方法研究

针对传统区间数据包络分析方法,在确定每一个决策单元区间效率的上界和下界时,存在的评价尺度不一致且计算复杂等问题,本文提出了一种同时最大化所有决策单元的效率上界和下界的公共权重区间DEA模型,并给出了一种考虑决策者偏好信息的可能度排序方法,用以解决区间效率的全排序问题。最后,以中国大陆11个沿海省份工业生产效率测算为例说明了所提方法的有效性和实用性。     

Super-efficiency and DEA sensitivity analysis

This paper discusses and reviews the use of super-efficiency approach in data envelopment analysis (DEA) sensitivity analyses. It is shown that super-efficiency score can be decomposed into two data perturbation components of a particular test frontier decision making unit (DMU) and the remaining DMUs. As a result, DEA sensitivity analysis can be done in (1) a general situation where data for a test DMU and data for the remaining DMUs are allowed to vary simultaneously and unequally and (2) the worst-case scenario where the efficiency of the test DMU is deteriorating while the efficiencies of the other DMUs are improving. The sensitivity analysis approach developed in this paper can be applied to DMUs on the entire frontier and to all basic DEA models. Necessary and sufficient conditions for preserving a DMU’s efficiency classification are developed when various data changes are applied to all DMUs. Possible infeasibility of super-efficiency DEA models is only associated with extreme-efficient DMUs and indicates efficiency stability to data perturbations in all DMUs.     

General and multiplicative non-parametric corporate performance models with interval ratio data

The increasing intensity of global competition has led organizations to utilize various types of performance measurement tools for improving the quality of their products and services. Data envelopment analysis (DEA) is a methodology for evaluating and measuring the relative efficiencies of a set of decision making units (DMUs) that use multiple inputs to produce multiple outputs. All the data in the conventional DEA with input and/or output ratios assumes the form of crisp numbers. However, the observed values of data in real-world problems are sometimes expressed as interval ratios. In this paper, we propose two new models: general and multiplicative non-parametric ratio models for DEA problems with interval data. The contributions of this paper are fourfold: (1) we consider input and output data expressed as interval ratios in DEA; (2) we address the gap in DEA literature for problems not suitable or difficult to model with crisp values; (3) we propose two new DEA models for evaluating the relative efficiencies of DMUs with interval ratios, and (4) we present a case study involving 20 banks with three interval ratios to demonstrate the applicability and efficacy of the proposed models where the traditional indicators are mostly financial ratios.     

Output–input ratio analysis and DEA frontier

Data envelopment analysis (DEA) is a mathematical programming technique for identifying efficient frontiers for peer decision making units (DMUs). The ability of identifying frontier DMUs prior to the DEA calculation is of extreme importance to an effective and efficient DEA computation. In this paper, we present mathematical properties which characterize the inherent relationships between DEA frontier DMUs and output–input ratios. It is shown that top-ranked performance by ratio analysis is a DEA frontier point. This in turn allows identification of membership of frontier DMUs without solving a DEA program. Such finding is useful in streamlining the solution of DEA.     

Ranking ranges in cross-efficiency evaluations

The existence of alternate optima for the DEA weights may reduce the usefulness of the cross-efficiency evaluation, since the ranking provided depends on the choice of weights that the different DMUs make. In this paper, we develop a procedure to carry out the cross-efficiency evaluation without the need to make any specific choice of DEA weights. The proposed procedure takes into consideration all the possible choices of weights that all the DMUs can make, and yields for each unit a range for its possible rankings instead of a single ranking. This range is determined by the best and the worst rankings that would result in the best and the worst scenarios of each unit across all the DEA weights of all the DMUs. This approach might identify good/bad performers, as those that rank at the top/bottom irrespective of the weights that are chosen, or units that outperform others in all the scenarios. In addition, it may be used to analyze the stability of the ranking provided by the standard cross-efficiency evaluation.     

Optimal system design series-network DEA models

There is an urgent need in a wide range of fields such as logistics and supply chain management to develop effective approaches to measure and/or optimally design a network system comprised of a set of units. Data envelopment analysis (DEA) researchers have been developing network DEA models to measure decision making units’ (DMUs’) network systems. However, to our knowledge, there are no previous contributions on the DEA-type models that help DMUs optimally design their network systems. The need to design optimal systems is quite common and is sometimes necessary in practice. This research thus introduces a new type of DEA model termed the optimal system design (OSD) network DEA model to optimally design a DMUs (exogenous and endogenous) input and (endogenous and final) output portfolios in terms of profit maximization given the DMUs total available budget. The resulting optimal network design through the proposed OSD network DEA models is efficient, that is, it lies on the frontier of the corresponding production possibility set.     

Interval data without sign restrictions in DEA

Conventional DEA models assume deterministic, precise and non-negative data for input and output observations. However, real applications may be characterized by observations that are given in form of intervals and include negative numbers. For instance, the consumption of electricity in decentralized energy resources may be either negative or positive, depending on the heat consumption. Likewise, the heat losses in distribution networks may be within a certain range, depending on e.g. external temperature and real-time outtake. Complementing earlier work separately addressing the two problems; interval data and negative data; we propose a comprehensive evaluation process for measuring the relative efficiencies of a set of DMUs in DEA. In our general formulation, the intervals may contain upper or lower bounds with different signs. The proposed method determines upper and lower bounds for the technical efficiency through the limits of the intervals after decomposition. Based on the interval scores, DMUs are then classified into three classes, namely, the strictly efficient, weakly efficient and inefficient. An intuitive ranking approach is presented for the respective classes. The approach is demonstrated through an application to the evaluation of bank branches.     

Centralized resource allocation with stochastic data

Data Envelopment Analysis (DEA) is a technique based on mathematical programming for evaluating the efficiency of homogeneous Decision Making Units (DMUs). In this technique inefficient DMUs are projected on to the frontier which constructed by the best performers. Centralized Resource Allocation (CRA) is a method in which all DMUs are projected on to the efficient frontier through solving just one DEA model. The intent of this paper is to present the Stochastic Centralized Resource Allocation (SCRA) in order to allocate centralized resources where inputs and outputs are stochastic. The concept discussed throughout this paper is illustrated using the aforementioned example.     

An extended slacks-based measure model for data envelopment analysis with negative data

Data envelopment analysis (DEA) is a non-parametric approach based on linear programming that has been widely applied for evaluating the relative efficiency of a set of homogeneous decision-making units (DMUs) with multiple inputs and outputs. The original DEA models use positive input and output variables that are measured on a ratio scale, but these models do not apply to the variables in which negative data can appear. However, with the widespread use of interval scale data and undesirable data, the emphasis has been directed towards the simultaneous consideration of the positive and negative data in DEA models. In this paper, using the slacks-based measure, we propose an extended model to evaluate the efficiency of DMUs, even if some variables are measured on an interval scale and some on a ratio scale. Moreover, the extended model allows for the presence of all interval-scale variables, which are capable of taking both negative and positive values.     

Variations on the theme of slacks-based measure of efficiency in DEA

In DEA, there are typically two schemes for measuring efficiency of DMUs; radial and non-radial. Radial models assume proportional change of inputs/outputs and usually remaining slacks are not directly accounted for inefficiency. On the other hand, non-radial models deal with slacks of each input/output individually and independently, and integrate them into an efficiency measure, called slacks-based measure (SBM). In this paper, we point out shortcomings of the SBM and propose four variants of the SBM model. The original SBM model evaluates efficiency of DMUs referring to the furthest frontier point within a range. This results in the hardest score for the objective DMU and the projection may go to a remote point on the efficient frontier which may be inappropriate as the reference. In an effort to overcome this shortcoming, we first investigate frontier (facet) structure of the production possibility set. Then we propose Variation I that evaluates each DMU by the nearest point on the same frontier as the SBM found. However, there exist other potential facets for evaluating DMUs. Therefore we propose Variation II that evaluates each DMU from all facets. We then employ clustering methods to classify DMUs into several groups, and apply Variation II within each cluster. This Variation III gives more reasonable efficiency scores with less effort. Lastly we propose a random search method (Variation IV) for reducing the burden of enumeration of facets. The results are approximate but practical in usage.