前驱体法制备Mn_2O_3空心橄榄形结构及形貌演化

利用苹果酸还原高锰酸钾以水热合成方法制备了具有橄榄形貌的纳米结构MnCO3前驱体,通过600℃焙烧MnCO3前驱体得到橄榄形Mn2O3.以扫描电镜(SEM)、透射电镜(TEM)、X射线衍射(XRD)、热重-差热分析(TG-DTA)等方法对产物的形貌和结构进行了表征.考察了MnCO3前驱体微观形貌随水热反应时间的演变:当水热反应时间为2h时得到具有橄榄形形貌的MnCO3前驱体,空心结构的壁比较厚;当水热反应时间延长到6h时得到的MnCO3前驱体仍然具有橄榄形形貌,壁变薄;当反应时间延长到24h时得到的MnCO3前驱体仍然具有橄榄形形貌,并且壁非常薄.我们推测在Ostwald熟化机理作用下,空心橄榄形MnCO3前驱体随着反应时间的延长其壁逐渐由160nm演化为30nm.     

Al2O3与BN在氩气中合成AlN粉末

氮化铝是一种具有许多优异性能的被认为具有广泛应用前景的无机材料,普遍受到国内外材料学家和化学家的关注。目前制备ＡｌＮ粉末主要有氧化物还原氮化法,等离子化学法,熔炼法,裂解法和直接氮化法,但由Ａｌ２Ｏ３与ＢＮ直接合成单相ＡｌＮ粉末尚未见报道［１,２］。...     

Preparation of trifluoroiodomethane via vapor-phase catalytic reaction between hexafluoropropylene oxide and iodine

Based on our previous investigation on the reaction mechanism to produce difluorocarbene and subsequent CF₃I starting with CHF₃ and I₂, a new route for preparing CF₃I at a relative low temperature, 200 °C, has been developed via a vapor-phase catalytic reaction between hexafluoropropylene oxide with I₂ in the presence of KF supported on activate charcoal as a catalyst. The influence of reaction temperature and reaction time on the amount of CF₃I was investigated. In the reaction process, coke-formation was suggested on the surface of catalysts by means of BET, XPS and TG-DTA analysis. The process for the formation of CF₃I and by-products is also discussed.     

Kinetics of Synthesis of Ba1.0Co0.7Fe0.2Nb0.1O3-δ through Solid-Solid Reaction

The mechanism of solid-solid reaction between BaCO₃ and Co₃O₄/Fe₂O₃/Nb₂O₅ has been investigated by means of non-isothermal thermogravimetry and differential scanning calorimetry (DSC) under flowing air gas conditions at atmospheric pressure with a new solid-solid reaction model. The effects of high speed agitating mixing and ball-milling mixing processes on the synthesis kinetics were also studied. The synthesis kinetics of Ba_1.0Co_0.7Fe_0.2Nb_0.1O_3-δ from the BaCO₃ and Co₃O₄/Fe₂O₃/Nb₂O₅ particles was calculated by applying the modified model. The results indicated that the overall reaction process was considered involving two stages: addition reaction between BaCO₃ and Co₃O₄/Fe₂O₃/Nb₂O₅ particles in the first stage and solution reaction between BaCoO₃, BaFeO₃, and BaNbO₃ to form a homogeneous Ba_1.0Co_0.7Fe_0.2Nb_0.1O_3-δ phase in the second stage. The new model matched well with the experimental data. The apparent activation energy of addition reaction stage of the high speed agitating mixing sample was estimated to be 376.76 kJ·mol⁻¹, which was only 3/4 of that of the ball-milling mixing sample (494.76 kJ·mol⁻¹). These results indicated that the high-speed agitating process could enhance atomic diffusion and facilitate the subsequent reaction, thus it is believed as a more effective, energy saving, and environmentally benign mixing process.     

CrOx-CeO2二元氧化物表面NO的NH3催化还原反应机理

利用原位漫反射红外光谱法研究了473 K下在CrOx-CeO₂二元氧化物表面NO的NH₃催化还原反应的机理。研究了CrO-CeO₂二元氧化物表面在反应过程中的表面吸附物种。为了更加清晰的了解反应过程, 在SCR反应过程中分别切断NH₃和NO的气流, 并采集了所生成的原位漫反射红外光谱图, 通过研究以上结果得出结论:当前状态下的SCR反应过程可能服从E-R机理。     

Synthesis of novel 1,4-disubstituted 1,2,3-triazoles bearing organosilicon-sulfur groups via the click reaction sonocatalyzed by LaCuxMn1-xO3 nanoparticles

A highly efficient and environmentally friendly one-pot procedure for the synthesis of 1,2,3-triazoles by 1,3-dipolar cycloaddition of benzyl halides, terminal alkynes, and sodium azide over LaCu_xMn_1-xO₃ perovskite oxides was developed. LaCu_0.7Mn_0.3O₃ was found to be active with low catalyst loading under ultrasonic irradiation in aqueous media. The reaction was performed efficiently in the presence of the nanocatalyst in the absence of any additive or base with a noticeable reduction in the reaction time. The catalyst could be recycled and reused at least five times without any significant effect on the results of the reaction. Moreover, a series of novel organosilicon-sulfur substituted 1,2,3-triazole derivatives was synthesized using carbon disulfide and tris(trimethylsilyl)methylithium.     

低温合成超导体Ba1-xKxBiO3

先以BaCO₃和Bi₂O₃为原料由传统的固相反应制备纯BaBiO₃,然后在低温下将用KOH-KF熔盐处理这样的拓扑反应合成了Ba_1-xK_xBiO₃超导体. 所有样品均进行了粉末X射线衍射（XRD）和磁性表征. XRD结果表明,所得Ba_1-xK_xBiO₃样品均为纯相,且均可用赝立方晶胞指标化. 磁性测量表明所有样品具有超导电性,最高超导转变温度（T_c）为30.6 K. 讨论了反应时间、前驱体与熔盐质量比对超导转变温度的影响. 最佳的反应条件为：反应温度450 ℃,反应时间4 h,BaBiO₃：KOH：KF质量比1：5：2.5.     

CrOx-CeO2二元氧化物表面NO的NH3催化还原反应机理

利用原位漫反射红外光谱法研究了473 K下在CrOx-CeO2二元氧化物表面NO的NH3催化还原反应的机理。研究了CrOx-CeO2二元氧化物表面在反应过程中的表面吸附物种。为了更加清晰的了解反应过程,在SCR反应过程中分别切断NH3和NO的气流,并采集了所生成的原位漫反射红外光谱图,通过研究以上结果得出结论:当前状态下的SCR反应过程可能服从ER机理。     

Cs2.5H0.5PW12O40 catalyzed diastereoselective synthesis of β-amino ketones via three component Mannich-type reaction in water

A series of insoluble salts of Keggin heteropoly compounds were prepared and used as catalysts for the Mannich-type reaction of benzaldehyde, aniline, and cyclohexanone in water. Among them, Cs_2.5H_0.5PW₁₂O₄₀ showed excellent catalytic activity. Effects of surfactant, catalyst loading and temperature were studied to introduce the best reaction condition. The optimized reaction conditions were extended to Mannich reaction of various aldehydes, ketones, and amines in water. This rapid procedure afforded structurally divers β-amino ketones with major anti diastereoselectivity. Additionally, four new compounds were reported. The catalyst was recovered and reused for subsequent runs.     

单分子水对H_2O_2+Cl气相反应影响的理论研究

在aug-cc-pVTZ基组下采用CCSD(T)和B3LYP方法,研究了H2O2+Cl反应,并考虑在大气中单个水分子对该反应的影响.结果表明,H2O2+Cl反应只存在一条生成产物为HO2+HCl的通道,其表观活化能为10.21kJ·mol-1.加入一分子水后,H2O2+Cl反应的产物并没有发生改变,但是所得势能面却比裸反应复杂得多,经历了RW1、RW2和RW3三条通道.水分子在通道RW1和RW2中对产物生成能垒的降低起显著的负催化作用,而在通道RW3中则起明显的正催化作用.利用经典过渡态理论(TST)并结合Wigner矫正模型计算了216.7-298.2 K温度范围内标题反应的速率常数.结果显示,298.2 K时通道R1的速率常数为1.60×10-13cm3·molecule-1·s-1,与所测实验值非常接近.此外,尽管通道RW3的速率常数kRW3比对应裸反应的速率常数kR1大了46.6-131倍,但该通道的有效速率常数k'RW3却比kR1小了10-14个数量级,表明在实际大气环境中水分子对H2O2+Cl反应几乎没有影响.     

Topotaxial formation of titanium-rich barium titanates during solid state reactions on (110) TiO2 (rutile) and (001) BaTiO3 single crystals

The orientation relationships of Ti-rich barium titanate phases formed by solid state reactions at high temperatures were studied using (110) TiO₂ (rutile) and (001) BaTiO₃ single-crystal substrates. Well-oriented Ba₆Ti₁₇O₄₀ islands were observed after a vapor–solid reaction of a BaO quantity equivalent to a nominal BaO film thickness of 1 nm with the TiO₂ substrate, whereas a thin film consisting of well-oriented BaTiO₃ and Ba₆Ti₁₇O₄₀ grains was formed after vapor–solid reaction of a BaO quantity equivalent to a nominal BaO film thickness of 50 nm with the rutile substrate. A topotaxial orientation relationship between Ba₆Ti₁₇O₄₀ and TiO₂ was found. Topotaxy is facilitated by a certain similarity in the oxygen sublattices of TiO₂ and Ba₆Ti₁₇O₄₀. The mechanism of the reaction occurring between BaO vapor and the TiO₂ surface at high temperature is discussed. On the other hand, several well-oriented Ba₄Ti₁₃O₃₀, Ba₆Ti₁₇O₄₀ and Ba₂Ti₅O₁₂ phases were observed to be embedded in the mainly forming Ba₂TiSi₂O₈ phase after a solid–solid reaction of amorphous SiO₂ thin films with (001) BaTiO₃ substrates at temperatures above 1000 °C. They were formed by a topotaxial reaction involving the transformation of (111) planes of BaTiO₃ into (001) planes of the Ti-rich phases by removal of BaO and insertion of TiO₂. Cross-sections of the interfaces between the substrates and the various reaction products are studied by (high-resolution) transmission electron microscopy.     

Simple but efficient synthesis of novel substituted benzimidazoles over ZrO2-Al2O3

Solid-acid catalytic materials such as ZrO₂-Al₂O₃ containing 80?mol% of ZrO₂ were prepared by the solution combustion method (SCM) using different fuels such as urea, hexamethylene tetramine, glycine, and sucrose. All the prepared solid acid catalytic materials were characterized for their physico-chemical properties like crystalinity, acidity, functionality and morphology. These materials were evaluated for their catalytic activity in the synthesis of a series of novel substituted benzimidazoles. The reaction conditions were optimized by varying the solvents, reaction temperature, weight of solid acid catalyst, molar ratio of the reactants, and reaction time. The ZrO₂-Al₂O₃ solid acid catalytic material prepared by urea as a fuel was found to be highly active, recyclable, and reusable in the synthesis of benzimidazoles. A possible reaction mechanism for the synthesis of benzimidazoles is also proposed.     

Preparation of a new pyrochlore-type compound Na0.32Bi1.68Ti2O6.46(OH)0.44 by hydrothermal reaction

A new pyrochlore-type Na_0.32Bi_1.68Ti₂O_6.46(OH)_0.44 with the cubic cell of a=10.339(5) Å was prepared by hydrothermal reaction using TiO₂ (anatase) and Bi₂O₃ in NaOH solution. This compound was obtained when the molar ratio of NaOH/TiO₂ was above 2 and the reaction temperature was above 240 °C. The TG-curve of as-prepared sample showed a mass loss of 0.8 mass% which was caused by release of OH group. This compound decomposed to a pyrochlore-type compound and a layered-type Na_0.5Bi_4.5Ti₄O₁₅ above 800 °C. The optical band gap of Na_0.32Bi_1.68Ti₂O_6.46(OH)_0.44 was estimated to be 2.5 eV.     

Effect of 3% Re2O7/60%Al2O3 - 40%SiO2 Catalyst Alkylation Time and Temperature Using Et4Pb on Methyl Erucate Conversion

A study of the alkylation of 3% Re₂O₇/60%Al₂O₃-40%SiO₂ catalyst using tetraethyllead (Et₄Pb)(TEL) shows that the reaction time and temperature affect the catalyst activity and selectivity in the methyl erucate metathesis reaction. This revised version was published online in June 2006 with corrections to the Cover Date.     

Ultrasound-assisted one-pot multi-component synthesis of 2-pyrrolidinon-3-olates catalyzed by Co3O4@SiO2 core–shell nanocomposite

2-pyrrolidinon-3-olates were synthesized via one-pot four-component reaction of 2-aminobenzothiazole, aromatic aldehydes, dimethyl acetylenedicarboxylate and morpholine/piperidine in the presence of Co₃O₄@SiO₂ core–shell nanocomposite as catalyst under ultrasound irradiation. The protocol offers several such advantages as high yields, short reaction time and mild reaction conditions with reusability of the catalyst. The core–shell nanocomposite was also prepared using ultrasound irradiation and the structure and magnetic properties were fully characterized by TEM, FE-SEM, XRD, EDX, FT-IR and VSM analysis.     

A study of the compounds present in the three-component system Dy2O3-SeO2-H2O at 100°C

The solubility isotherm of the system Dy₂O₃-SeO₂-H₂O at 100°C was studied and drawn. The selenites present in the system were identified and isolated. A thorough TG, DTG and DTA analysis was made. By modelling the conditions of TG, DTG and DTA analysis, the phases of the thermal decomposition were isolated and identified. The chemistry of the reaction was described.     

WS2纳米颗粒的合成及摩擦学性能研究

将自制的WO₃纳米颗粒前驱体与S粉混合,在自制的反应装置氢气氛中,于550～750 ℃下煅烧得到二硫化钨纳米颗粒,反应中用H₂代替H₂S以减少对周围环境的污染。该合成路线简单且产物纯度高。用XRD、SEM、TEM和HRTEM对二硫化钨纳米结构进行了表征和分析,并将WS₂纳米颗粒作为添加剂添加到N40基础油中,在MS-T3000摩擦磨损仪测试其摩擦学性能。结果显示:制备的二硫化钨颗粒平均粒径在50 nm以内,其形状为球形或类球形。WS₂纳米颗粒作为普通润滑油的纳米级固体添加剂表现出了较优异的摩擦学性能。     

Study on the Phenolic Oxidation by H2O2 Using Metallomicelles Composed of Dinuclear Copper(II) Complex as Synthetic Peroxidases

A dinuclear copper(II) complex [Cu₂(oxheel)] was synthesized and its structure was analyzed. This compound was then mixed with a surfactant (Brij35 or LSS) to form a metallomicelle, which would catalyze the phenol oxidation with the hydrogen peroxide (H₂O₂). The reaction mechanism and the mathematic model for the kinetics of this reaction were proposed, and the effect of the molar ratio between H₂O₂ and catalyst, of the temperature and of the pH levels on the rate of catalytic reaction were studied.     

Gas-phase phenyl acetate conversion on AlPO4, γ-Al2O3 and SiO2 catalysts

The conversion of phenyl acetate over AlPO₄ (Al/P=1), γ-Al₂O₃ and SiO₂ catalysts generated phenol, by deacetylation, ando-hydroxycetophenone, by Fries rearrangement, as the main reaction products. The activity for Fries rerrangement was in accordance with the acidity data measuredversus cyclohexene skeletal isomerization. Thus, AlPO₄ showed the highest activity. Moreover,o-hydroxy-acetophenone formation increased with the reaction temperature. Besides, in AlPO₄ catalysts 4-methylcoumarin and 2-methylchromone were also found, although in low amounts.     

CrOx/SiO2催化剂上丙烷在CO2气氛中脱氢反应的研究

采用XRD、UV-vis DRS、ESR和微分吸附量热等技术,考察了铬担载量分别为2.5、5和10wt%的CrO_x/SiO₂催化剂的结构、表面性质和氧化还原性能。结果表明,催化剂表面上存在多种Cr的氧化态和聚集形式。随着Cr担载量从2.5wt%到10wt%的逐渐增大,催化剂表面占主导地位的Cr物种由CrO₃单体转为多聚CrO₃和Cr₂O₃晶相。在CO₂气氛中催化剂对丙烷转化率和丙烯选择性的大小顺序为2.5wt%CrO_x/SiO₂>5wt%CrO_x/SiO₂>10wt%CrO_x/SiO₂,反应过程中的原位ESR和UV-visDRS测定结果表明,催化剂表面的反应活性中心为Cr⁵⁺,Cr⁵⁺可由催化剂预处理过程中Cr³⁺的氧化及丙烷反应过程中CrO₃单体的还原产生,在反应中CO₂可使Cr³⁺重新氧化为Cr⁵⁺.