用多分散高聚物标样作凝胶色谱的分子量分离和扩展效应同时校准

根据凝胶色谱柱在理想工作条件下单分散高分子组分的校准关系与多分散试样的实效关系之间的理论联系,建议了一种简单的觅数方法,同时作凝胶色谱柱的分子量分离和扩展因子的校准。用本法从窄分布的聚苯乙烯和宽分布的1,2-聚丁二烯级分的实验谱图得到的所用凝胶色谱柱的扩展因子与淋出体积间的关系相互重合,与试样种类无关。     

SIMULTANEOUS CALIBRATION OF MOLECULAR WEIGHT SEPARATION AND COLUMN DISPERSION OF SEC WITH CHARACTERIZED POLYMER STANDARDS

With the aid of the theoretical relationship between the calibration relation of a SEC column for the monodisperse polymer species under ideal working condition and the effective relations between the molecular weight and the elution volume for characterized polymer samples, a computational procedure for simultaneous calibration of molecular weight separation and column dispersion is proposed. From the experimental chromatograms of narrow MWD polystyrene standards and broad MWD 1,2-polybutadiene fractions the spreading factors of a SEC column was deduced by the proposed method. The variation of the spreading factor with the elution volume is independent upon the polymer sample used.     

Separation of poly-3-hydroxyvalerate-co-3-hydroxybutyrate through gradient polymer elution chromatography

Polyhydroxyalkanoates are biodegradable polyesters produced by bacteria that can have a wide distribution in molecular weight, composition of monomers, and functionalities. This large distribution often leads to unpredictable physical properties making commercial applications challenging. To improve polymer homogeneity and obtain samples with a clear set of physical characteristics, poly-3-hydroxyvalerate-co-3-hydroxybutyrate copolymers were fractionated using gradient polymer elution chromatography (GPEC) as opposed to extensively used bulk fractionation. Separation was achieved using a reversed-phase column with chloroform and ethanol as the solvent and non-solvent, respectively. A separation was also conducted on a normal-phase column to compare elution patterns between columns of varied polarity. The fractions were analyzed using Size Exclusion Chromatography (SEC) and NMR to determine the percentage of 3-hydroxyvalerate in the copolymer as well as its molecular weight. It was found that as the percentage of "good" solvent was increased in the mobile phase, the polymers eluted with decreasing percentage of 3-hydroxyvalerate and increasing molecular weight which indicates the importance of precipitation/redissolution in the separation. The elution pattern of the polymer remained unchanged when using both a normal- and reversed-phase column which also illustrates the dominance of precipitation/redissolution in GPEC of polyhydroxyalkanoates. As such, GPEC is shown to be an excellent choice to provide polyhydroxyalkanoate samples with a narrower distribution in composition than the original bulk copolymer sample.     

Direct and automatic capillary GC analysis for molecular weight determination and distribution in crude oils and condensates up to C20

A direct and automatic method has been developed for molecular weight (MW) determination and distribution in crude oils and condensates up to C₂₀ (340°C) by gas chromatography. Chromatographic separation has been achieved with a 50 m OV-1 fused silica capillary column, fitted with a pre-column to eliminate the fraction boiling above 340°C. The internal standard is added for quantification. Approximately 550 peaks have been identified by the use of GC/MS on different paraffinic, naphthenic, and aromatic crude oils or condensate samples. From identification and by correlation with MS group-type analysis, a carbon number and a hydrocarbon group are attributed to each peak or group of peaks. Further molecular weights have been calculated from these groups. A comparison between results from this GC method and cryometry of narrow and wide fractions shows good agreement, within the precision of cryometry. An automatic identification by computer using programmed temperature indices was used for the direct determination of molecular weight. The final report gives weight percentage, molar percentage, and molecular weight for every boiling range group and hydrocarbon group.     

Selective on-line serum peptide extraction and multidimensional separation by coupling a restricted-access material-based capillary trap column with nanoliquid chromatography–tandem mass spectrometry

As the serum peptidome gets increasing attention for biomarker discovery, one of the important issues is how to efficiently extract the peptides from highly complex human serum for peptidome analysis. Here we developed a fully automated platform for direct injection, on-line extraction, multidimensional separation and MS detection of peptides present in human serum. A capillary SPE column packed with a novel mix mode restricted access material (RAM) exhibiting strong cation exchange and size exclusion chromatography (SCX/SEC) properties were coupled with a nanoliquid chromatography–mass spectrometry (nanoLC-MS) system. The capillary SPE column excludes the high abundant serum proteins such as HSA by size exclusion chromatography and simultaneously extracts the low molecular weight peptides by binding to sulfonic acid residues. Subsequently, the trapped peptides are eluted to a capillary LC column packed with a RP-C18 stationary phase. After injection of only 2 μL human serum to the one-dimensional nanoLC-MS system around 400 peptides could be identified. When conducting a multidimensional separation, the described SCX/SEC/RP-MS platform allows the separation and identification of 1286 peptides present in human serum by the injection and on-line processing of 20 μL human serum sample.     

Studies on high-performance size-exclusion chromatography of synthetic polymers. I. Volume of silica gel column packing pores reduced by retained macromolecules

Macromolecules, which stay adsorbed within the active size-exclusion chromatography (SEC) column packings may strongly reduce effective volume of the separation pores. This brings about a decrease of retention volumes of the non-retained polymer samples and results in the increased apparent molar mass values. The phenomenon has been demonstrated with a series of poly(methyl methacrylate)s (PMMA) and a polyethylenoxide (PEO) fully retained by adsorption within macroporous silica gel SEC column from toluene or tetrahydrofuran, respectively. The non-retained probes were polystyrenes (PS) in toluene and both PS and PMMA in THF eluents. The errors in the peak molar mass values determined for the non-retained polymer species using a column saturated with adsorbed macromolecules and considering calibration curves monitored for the original "bare" column packing assumed up to several hundreds of percent. Errors may appear also in the weight and number averages of molar masses calculated from calibration dependences obtained with columns saturated with adsorbed macromolecules. Moreover, the SEC peaks of species eluted from the polymer saturated columns were broadened and in some cases even split. These results demonstrate a necessity not only to periodically re-calibrate the SEC columns but also to remove macromolecules adsorbed within packing in the course of analyses.     

Separation of branched polystyrene by comprehensive two-dimensional liquid chromatography

Branched polystyrenes (PS) featuring a bivariate distribution in the molecular weight and in the number of branches were characterized by comprehensive two-dimensional liquid chromatography (2D-LC). The branched PS were prepared by anionic polymerization using n-butyl Li as an initiator and a subsequent linking reaction with p-(chlorodimethylsilyl)styrene (CDMSS). The n-butyl Li initiator yields polystyryl anions with broad molecular weight distribution (MWD) and the linking reaction with CDMSS yields branched PS with different number of branches. For the first dimension (1st-D) separation, reversed-phase temperature gradient interaction chromatography (RP-TGIC) was employed to separate the branched polymer according to mainly the molecular weight. In the second dimension (2nd-D) separation, the effluents from the RP-TGIC separation are subjected to liquid chromatography at chromatographic critical conditions (LCCC), in which the separation was carried out at the critical condition of linear homo-PS to separate the branched PS in terms of the number of branches. The 2D-LC resolution of RP-TGICxLCCC combination worked better than the common LCCCxsize-exclusion chromatography (SEC) configuration due to the higher resolution of RP-TGIC in molecular weight than SEC. Furthermore, by virtue of using the same eluent in RP-TGIC and LCCC (only the column temperature is different), RP-TGICxLCCC separation is free from possible 'break through' and large system peak problems. This type of 2D-LC separation could be utilized efficiently for the analysis of branched polymers with branching units distinguishable by LC separation.     

Size-exclusion separation of proteins using a biocompatible polymeric monolithic capillary column with mesoporosity

Biocompatible poly(ethylene glycol methyl ether acrylate-co-polyethylene glycol diacrylate) monoliths were prepared for size exclusion chromatography (SEC) of proteins in the capillary format using Brij 58P in a mixture of hexanes and dodecanol as porogens. The monolithic columns provided size separation of four proteins in 20 mM sodium phosphate buffer (pH 7.0) containing 0.15 M NaCl, and there was a linear relationship between the retention times and the logarithmic values of the molecular weights. Compared to SEC monoliths previously synthesized using a triblock copolymer of polyethylene oxide and polypropylene oxide, an increase in mesoporosity was confirmed by inverse size exclusion chromatography. As a result, improved protein separation in the high molecular weight range and reduced column back-pressure were observed.     

Longitudinal Miniaturization of Fiber-Packed Capillary Column in High Temperature Gas Chromatography

Miniaturization of fiber-packed capillary column in gas chromatography was studied. Packed with a bundle of polymer-coated filaments into a short metal capillary, longitudinal miniaturization was demonstrated without any significant disadvantages for practical retentivity and sample loading capacity. With a metal capillary of 0.3 mm i.d., the typical column length could be reduced to be several centimeters. The retentivity for alkanes on the fiber-packed capillary column was compared to that obtained by a conventional open-tubular capillary column of the same length. Taking advantage of the heat-resistant property of both the fiber and the metal capillary, the separation of a polystyrene mixture on the polymer-coated fiber-packed short metal capillary column with a temperature-programmed run up to 400 °C was successfully carried out. As the typical application, rapid GC separations were also carried out with the short column of 0.05 m length.     

Fast size-exclusion chromatography at high temperature

We report on the size-exclusion chromatography (SEC) operated at high column temperature to reduce the analysis time. The column temperature was raised beyond the normal boiling point of the eluent and a sufficient column backpressure was applied to prevent the mobile phase from boiling by inserting a narrow bore tubing between the separation column and the detector. The narrow bore tubing also functions to cool the effluent down to the room temperature before it reaches the detector. Therefore, normal SEC detectors can be used without any modification. It was confirmed that the SEC analysis time could be shortened significantly by the high-temperature operation without serious deterioration in the resolution.     

Fast Temperature Programming in Gas Chromatography using Resistive Heating

The features of a resistive-heated capillary column for fast temperature-programmed gas chromatography (GC) have been evaluated. Experiments were carried out using a commercial available EZ Flash GC, an assembly which can be used to upgrade existing gas chromatographs. The capillary column is placed inside a metal tube which can be heated, and cooled, much more rapidly than any conventional GC oven. The EZ Flash assembly can generate temperature ramps up to 1200°/min and can be cooled down from 300 to 50°C in 30 s. Samples were injected via a conventional split/splitless injector and transferred to the GC column. The combination of a short column (5 m×0.25 mm i. d.), a high gas flow rate (up to 10 mL/min), and fast temperature programmes typically decreased analysis times from 30 min to about 2.5 min. Both the split and splitless injection mode could be used. With n-alkanes as test analytes, the standard deviations of the retention times with respect to the peak width were less than 15% (n = 7). First results on RSDs of peak areas of less than 3% for all but one n-alkane indicate that the technique can also be used for quantification. The combined use of a short GC column and fast temperature gradients does cause some loss of separation efficiency, but the approach is ideally suited for fast screening as illustrated for polycyclic aromatic hydrocarbons, organophosphorus pesticides, and triazine herbicides as test compounds. Total analysis times – which included injection, separation, and equilibration to initial conditions – were typically less than 3 min.     

聚二乙烯苯整体柱的制备及其在气相色谱分析中的应用

初步探讨了毛细管整体柱的制备方法及其在气相色谱分析中的应用。以液相色谱用毛细管整体柱作为研究基础,通过改变甲苯和十二醇的比例,使整体柱适用于气相色谱分析。通过二乙烯苯与键合在管壁上的3-(异丁烯酰氯)丙基三甲氧基硅烷(TMP)键合以及其自身的聚合,获得具有牢固结构、良好机械强度的整体柱。将其用于混合溶剂的分析和白酒标样的分析,可直接分析水中低碳醇。与现有的商品柱进行比较,结果表明所制备的整体柱均优于用以对照的商品色谱柱,其中在混合溶剂的分析中,醇类、酯类、酮类和芳烃类的峰形均优于用于比较的多孔层开口管(PLOT)柱;在白酒标样分析中,使得乙醛、甲醇、乙酸乙酯的色谱峰能够分开,比现有的聚乙二醇(PEG-20M)柱的分析方法更为便捷。     

Compositional studies of high-temperature coal tar by GC/FTIR analysis of light oil fractions

Summary A method for determination of the composition of the light oil fractions in high-temperature coal tar by means of distillation, followed by gas chromatography on a crosslinked fused-silica, capillary column coated with optimum amount of stationary phase and identification by capillary gas chromatography/Fourier transform infrared spectrometry combined with GC retention indices (GC/FTIR-RI) is described. This method was effectively used to identify complex mixture such as coal tar without any standard samples, especially, adapted for isomeric compounds. More than 60 and 50 compounds were also separated and identified respectively in light oil fractions. This shows the capability of the capillary GC/FTIR combined with GC retention indices to identify isomers not accomplished by GC/MS.     

基于金属有机骨架材料固定相的气相色谱分离应用

金属有机骨架材料(MOFs)是一类由有机配体和金属离子(或金属簇)自组装形成的新型多功能材料。MOFs具有孔隙度高、比表面积大、孔径可调、化学和热稳定性高等特点,被广泛应用于吸附、分离、催化等多个领域。近年来,MOFs作为新型气相色谱固定相用于分离异构体受到了广泛关注。与传统无机多孔材料相比,MOFs在结构和功能上展现出高度的可调性,通过合理地选择配体和金属中心,可以设计合成具有不同孔道大小和孔道环境的MOFs,从而分别从热力学和动力学角度优化色谱分离效果,有效提高分离选择性。该文结合MOFs的结构,讨论了MOFs气相色谱固定相分离不同类型分析物的分离机理。分离机理主要包括MOFs孔道的分子筛效应或形状选择性,MOFs不饱和的金属位点与分析物中不同的官能团之间产生的相互作用,分析物与MOFs孔道之间产生的不同范德华力、π-π相互作用和氢键相互作用。此外,MOFs的手性分离可能主要依赖于外消旋体与手性MOFs中手性活性位点之间的相互作用。该文也对不同分析目标物进行了归类,综述了多种MOFs气相色谱固定相对烷烃、二甲苯异构体和乙基甲苯、外消旋体、含氧有机物、环境有机污染物的气相色谱分离效果。最后,该文还对MOFs在该领域的应用进行了总结与展望,旨在为MOFs气相色谱高效分离的研究提供参考。     

Strategies in two‐dimensional liquid chromatographic separation of complex polymer systems

Complex synthetic polymer systems as for example copolymers exhibit distributions in at least two of the three basic molecular characteristics which are molar mass, chemical structure/composition and molecular architecture. Size exclusion chromatography (SEC) separates macromolecules according to their size in solution which simultaneously depends on all molecular characteristics. Therefore, multi‐dimensional liquid chromatographic techniques are to be applied to independently assess all different distributions present in the sample. So far, two‐dimensional separations have been attempted. In the first dimension separation column, selected liquid chromatographic mechanisms are intentionally combined to suppress effects of all but one molecular characteristic. Consequently, polymer species are separated exclusively or at least predominantly according to one single parameter. In the second dimension separation column, macromolecules are separated according to another molecular characteristic. In this contribution the methods are briefly reviewed in which effect of polymer molar mass on polymer retention is suppressed. The resulting ”one parameter separation systems” can be on‐line or off‐line connected to another separation system such as SEC to provide more detailed characterization of complex polymers. Besides, selected procedures for the re‐concentration of diluted polymer solutions are concisely treated. These may be utilized for increasing the concentration of sample(s) leaving the first dimension separation column. Eventually, some arrangements for controlled sample re‐introduction into the second dimension separation column are outlined.     

Polymer characterization by interaction chromatography

Liquid chromatography (LC) is a powerful tool for the characterization of synthetic polymers, that are inherently heterogeneous in molecular weight, chain architecture, chemical composition, and microstructure. Of different versions of the LC methods, size exclusion chromatography (SEC) is most commonly used for the molecular weight distribution analysis. SEC separates the polymer molecules according to the size of a polymer chain, a well‐defined function of molecular weight for linear homopolymers. The same, however, cannot be said of nonlinear polymers or copolymers. Hence, SEC is ill suited for and inefficient in separating the molecules in terms of chemical heterogeneity, such as differences in chemical composition of copolymers, tacticity, and functionality. For these purposes, another chromatographic method called interaction chromatography (IC) is found as a better tool because its separation mechanism is sensitive to the chemical nature of the molecules. The IC separation utilizes the enthalpic interactions to vary adsorption or partition of solute molecules to the stationary phase. Thus, it is used to separate polymers in terms of their chemical composition distribution or functionality. Further, the IC method has been shown to give rise to much higher resolution over SEC in separating polymers by molecular weight. We present here our recent progress in polymer characterization with this method. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 1591‐1607, 2005     

Nonaqueous capillary gel electrophoretic analysis of metal nanoclusters in polymeric–DMSO–Li+ systems

In this study, we investigated a combination of nonaqueous CE with capillary gel electrophoresis to achieve highly efficient analysis of metal nanoclusters. In the nonaqueous capillary gel electrophoresis (NACGE), PVA and hydroxypropyl methylcellulose were dissolved in DMSO. In addition, to enhance the entanglement of the polymer chains, Li⁺ ions were also added. By employing the PVA‒DMSO‒Li⁺ solution, we studied the effects of the molecular weight, the degree of hydrolysis, and the concentration of the polymers and Li⁺ on the separation. As a result, good separations of standard mononuclear metal complexes and tetrairon nanoclusters were achieved by NACGE.     

Detailed characterization of cationic hydroxyethylcellulose derivatives using aqueous size-exclusion chromatography with on-line triple detection

A more complete understanding of polymeric, cationic cellulose derivatives, including polyquaterium-10 (Polymer JR), has become increasingly important in the eye care industry as thorough characterization of raw materials helps promote product quality and process control. Often such detailed information requires utilization of a combination of analytical techniques. In this work three Polymer JR samples with different viscosities were characterized using aqueous size exclusion chromatography (SEC) with a light scattering detector, a differential viscometer, and a differential refractometer (triple detection). Detailed molecular information such as absolute molecular weights, molecular weight distributions, intrinsic viscosities, and molecular conformations were obtained. One major challenge of analyzing cationic polymers is abnormal size exclusion separation, which could be caused by the ionic interaction between sample molecules and the column packing material. A selection of mobile phases varying in pH, buffer, organic solvent content, and molar concentration of salts was employed to evaluate the correlation of obtained molecular weight values and mobile phase composition. Universal calibration concept was used to examine the abnormal size exclusion separation phenomenon of Polymer JR samples when using different mobile phases. It was observed that the abnormal size exclusion was dependent on both the separation conditions and molecular weights of the samples. Despite the changes in separation parameters and uncharacteristic polymeric structure compared to conventional SEC samples, the use of aqueous SEC with triple detection provided reproducible and valuable molecular information of Polymer JR samples with low to medium molecular weights. By using a combination of high buffer content and adding organic solvent, the abnormal exclusion separation of high molecular weigh Polymer JR could be considerably reduced.     

Columns switch recycling size exclusion chromatography for high resolution protein separation

Columns switch recycling size exclusion chromatography (csrSEC) was proposed to achieve high resolution protein separation with good biocompatibility. Proteins were firstly separated by two serially coupled SEC columns, and fractions were in sequence switched back to the first column by two-position valves for further separation in terms of close-loop recycling until satisfactory resolution was achieved. Compared to SEC, the separation window was broadened by increasing column length via cycling without further increase on back pressure. Compared to recycling SEC (rSEC), the overtaking of later eluted components by early eluted ones after several cycles could be avoided for complex sample analysis, by parking fractions in the second SEC column before transferred in turn back to the first one for cycling ordinally. In our experiments, the baseline separation of five proteins with molecular weight ranging from 10 kDa to 80 kDa was achieved by csrSEC. Furthermore, a multidimensional csrSEC–RPLC platform was constructed, and peak capacity up to 3600 was obtained for protein separation. All these results demonstrated that csrSEC is a promising protein separation mode with good biocompatibility, broadened separation window and improved resolution.     

On-line concentration of peptides and proteins with the hyphenation of polymer monolithic immobilized metal affinity chromatography and capillary electrophoresis

An iminodiacetic acid (IDA)-type adsorbent is prepared at the one end of a capillary by covalently bonding IDA to the monolithic rods of macroporous poly(glycidyl methacrylate-co-ethylene dimethacrylate). Cu(II) is later introduced to the support via the interaction with IDA. By this means, polymer monolithic immobilized metal affinity chromatography (IMAC) materials are prepared. With such a column, IMAC for on-line concentration and capillary electrophoresis (CE) for the subsequent analysis are hyphenated for the analysis of peptides and proteins. The reproducibility of such a column has been proved good with relative standard deviations (RSDs) of dead time of less than 5% for injection-to-injection and 12% for column-to-column (n = 3). Through application on the analysis of standard peptides and real protein samples, such a technique has shown promising in proteome study.