共查询到20条相似文献,搜索用时 484 毫秒
1.
2.
针对利用液晶空间光调制器(LC-SLM)进行全息图光电再现过程中,再现像面存在多级衍射像造成单一像能量利用率低的问题,提出了一种在位相全息图中加载数字闪耀光栅的方法,以提高全息图光电再现中单一衍射像的衍射效率.分析了闪耀光栅作为衍射光学元件的特性及其对光波进行位相调制的原理,并阐述了在LC-SLM中加载数字闪耀光栅对位相全息图光电再现时像面能量分布的影响.搭建了基于LC-SLM的位相全息图光电再现实验系统.理论分析表明:在其他条件不变的情况下,加载竖直(或水平)槽向周期为2 pixels的数字闪耀光栅可使
关键词:
全息光电再现
位相全息图
数字闪耀光栅
液晶空间光调制器 相似文献
3.
基于滤波成像的大视角数字全息技术 总被引:1,自引:1,他引:0
为提高数字全息再现像视角,提出一种基于滤波成像的数字全息技术来实现大视角的三维物体面型测量.利用离轴像面数字全息技术,通过在4F相干图像处理系统的空间频谱面处放置可移动的低通滤波器,使满足CCD分辨率的物光波与参考光波干涉形成全息图,并控制低通滤波及成像区域分别记录不同谱段的子全息图.再现时,首先对子全息图进行数字傅里叶变换,重构对应频谱段,并对频谱段进行拼接形成完整的物光频谱;而后通过数字再现获得大视角的数字全息再现像.利用该方法测量了圆柱形表面(光滑的缝纫针)的三维形貌,并取得了较好的实验结果. 相似文献
4.
为提高数字全息再现像视角,提出一种基于滤波成像的数字全息技术来实现大视角的三维物体面型测量.利用离轴像面数字全息技术,通过在4F相干图像处理系统的空间频谱面处放置可移动的低通滤波器,使满足CCD分辨率的物光波与参考光波干涉形成全息图,并控制低通滤波及成像区域分别记录不同谱段的子全息图.再现时,首先对子全息图进行数字傅里叶变换,重构对应频谱段,并对频谱段进行拼接形成完整的物光频谱|而后通过数字再现获得大视角的数字全息再现像.利用该方法测量了圆柱形表面(光滑的缝纫针)的三维形貌,并取得了较好的实验结果. 相似文献
5.
6.
在数字全息研究中,为了充分利用CCD器件有限的卒间带宽积,常采用同轴全息记录.然而用同轴全息图再现时,再现物光波和共轭物光波是混在一起无法分开的.有效消除同轴全息图再现光波场中的共轭像是数字全息应用中的一项关键技术.基于菲涅耳衍射运算和逆运算,提出一种用同轴数字全息图重构物光波面的迭代算法.该方法利用同轴全息图再现时,再现物光波和共轭物光波衍射特性的不同来剔除共轭物光波成分,从而将再现物光波成分有效分离出,实现单幅同轴全息图的物光波面数值重构.计算机模拟实验证明了该方法简单易行. 相似文献
7.
8.
为实现对运动目标实时指示激光束的非机械电控制,建立了基于光学相控阵的目标指示系统.首先,根据光学相控阵原理和空间光调制特性,对预设指示图添加共轭对称项,利用快速傅里叶变换计算全息法生成的全息图进行制表.其次,在图像传感器采集视频下,运用基于核函数密度估计的改进Mean-shift目标跟踪算法,获取多目标位置信息,查表并载入全息信息,完成全息图的实时更新.最后,利用空间光滤波特性,设计光电再现环节,消去冗余项并完成全息再现过程.实验发现:对8bit灰度全息图,系统每秒的指示速度均在60帧以上,各部件效能达到最大化.满足了目标指示系统稳定性、实时性、准确性等要求,理论算法和实验结果也验证了该系统的有效性. 相似文献
9.
应用Matlab语言,结合博奇型计算全息的编码方法,利用计算机分别绘制了菲涅耳全息图和傅里叶变换全息图,实现了计算全息图的快速制作,讨论了制作计算全息图的原理、方法和步骤。利用CGH技术和数字全息技术所生成的全息图再现出原始图像,完成了全息图的数字重现,实现了整个全息记录和再现过程的计算机模拟。与传统的编程语言和绘图方法相比较,该算法在实现上更加简单和快捷,并且带有一系列提高计算全息图质量的措施,有效地消除了零级像和孪生像的影响,获得了清晰的数字再现图像。 相似文献
10.
11.
12.
13.
14.
A multi-image encryption scheme based on interference of computer generated holograms (CGH) is proposed. The encrypted information can be divided into several parts and recorded by corresponding CGHs that distribute randomly. With interference of all CGHs, the original information can be reconstructed. So the multi-image encryption is achieved, and every hologram can be regarded as the key to the corresponding image. Multi-user authentication and storage of information is implemented by applying unique CGH to interfere the common CGH. Furthermore, the CGHs can be cascaded to implement classification of images. When images of different level are assigned to corresponding user, hierarchical encryption is completed successfully. Numerical simulation verifies the feasibility of the method, and demonstrates the security of the algorithm and the decryption characteristics. Flexibility and variability of scheme can be higher than the existing methods. There are a lot of scheme's details still to consider and fulfill in the future. 相似文献
15.
16.
We present a new method for numerically reconstructing holography image on tilted planes within the Fresnel domain. The method is based on the Fresnel diffraction algorithm and object wave rotation transform. By suitable rotation the object wave on recording plane and once fast Fourier transformation this method can be implemented. The proposed method can render the real image of the hologram not only on parallel plane but also on the tilted. Experimental results are presented to demonstrate the method for a single axis rotation. 相似文献
17.
提出了一种基于两步广义相移干涉术的波前再现技术以及基于衍射场统计特性的未知相移值提取算法,并且进行了光学实验验证.该方法中可仅利用两幅干涉图及一次不需精确预设的未知相移,参照物光光强和参考光光强,即可通过计算提取真实的相移量,进而恢复出物波波前复振幅,而无需借助傅里叶谱分析或数字滤波等操作.在光学实验中,对借助于空间光调制器(SLM)的间接输入和三维漫反射物体直接输入两种情况进行了详细地研究,得到的光学实验结果验证了所提方案的有效性和可行性.
关键词:
信息光学
相移干涉术
波前再现
数字图像处理 相似文献
18.
研究了一种计算全息编码过程中使原始像与共轭像分离的方法。通过对傅里叶变换计算全息图再现过程的分析,采用将原物抽样点镶嵌到比原物大的全零矩阵中的方法代替载频参数的计算,来实现原始像与共轭像的分离。对新矩阵进行离散傅里叶变换,利用博奇编码方式制作出计算全息图,并在图像重构时利用高通滤波器消除背景光干扰对重构视觉效果的影响。采用该方法制作的计算全息图可通过控制全零矩阵的大小来控制再现时原始像与共轭像的分离程度,全零矩阵越大,其分离程度越大。实验结果表明,全零矩阵为原物大小的4倍时可使原始像与共轭像刚好分离。但是为了方便滤除零级光斑,全零矩阵需稍大于原物大小的4倍。 相似文献
19.
In this paper two new architectures for optical image verification are proposed. Both architectures are based on conventional joint transform correlators (JTCs) adopting a Fourier hologram and can significantly improve the recovered image quality. First, an input phase-only function is Fourier transformed and then interferes with a reference wave that is diffracted from a plane wave incident on another random phase mask. Second, two phase-only functions are placed at the two input sides of a beamsplitter such that the interference pattern of their Fourier transforms can be detected. To obtain a predefined target image in the output plane, one of the input phase functions is iteratively retrieved by the use of the projection onto constraint sets algorithm. Simulation results show that the less mean squared error and better image quality are obtained for both the binary and grayscale images. 相似文献
20.
Rahul Bhatt Sanjay K. Mishra D. Mohan A.K. Gupta 《Optics and Lasers in Engineering》2008,46(6):428-439
A fast holographic wavefront sensor is proposed using a computer-generated hologram (CGH). This CGH is a multiplexed hologram of different Zernike mode–amplitude combinations, and is designed in such a manner as to get the corresponding spots on the detector according to the presence and strength of a particular aberration. Interference between the aberrated wavefront (with a single mode–amplitude combination) and the Fourier transform of an image with single bright pixel (defined as dot image) is numerically calculated for one hologram. Different mode–amplitude combination and corresponding different positions of bright pixels (dots) are taken to compute various holograms and then all the holograms are multiplexed to get the final hologram. When the aberrated wavefront with a particular mode–amplitude combination is incident onto the multiplexed hologram, the corresponding dot is generated in the Fourier plane. A lens performs the Fourier transform in optical domain and provides the instant detection of amplitude of the respective Zernike mode. The main advantage of the scheme is to avoid the need of any computations, which makes it really fast. The simulation results are presented with the cross-talk analysis for few Zernike terms. 相似文献