稳态和动态荧光研究疏水缔合共聚物P(AM/POEA)的自缔合行为和聚集体

应用稳态和动态荧光光谱方法,包括荧光探针、标记荧光和荧光淬灭等研究了共聚物P(AM/POEA)在水溶液中的自缔合性质.这种共聚物由丙烯酰胺(AM)和少量疏水单体2-苯氧乙基丙烯酸酯(POEA)组成.实验结果表明这类共聚物的自缔合行为和聚集体结构主要取决于聚合物的链结构和浓度.由胶束共聚合方法得到具有多嵌段结构的共聚物,它们容易发生疏水缔合,并产生很强的增粘作用,而由普通共聚合方法得到的无规共聚物却没有这些性质.同时这类聚合物的缔合类型及其增粘能力也直接与共聚物中的疏水体含量相关,随疏水体含量增加,由于分子间和分子内缔合的竞争,出现粘度先增后降的现象.在荧光研究的基础上提出了多分子聚合物聚集体的结构模型,它随聚集体浓度增加,进一步形成多联聚集体和网状结构.同时还观察到聚集体中疏水体有序排列现象.     

含环状原酸酯侧基的两亲性嵌段共聚物及其酸敏感胶束状聚集体

合成了含有环状原酸酯基团的单体,甲基丙烯酸5-(5-甲基-2-乙氧基-1,3-二氧六环)甲酯(EDMM),以PEO大分子引发剂引发,通过原子转移自由基聚合方法制备了两个疏水链段(PEDMM)长度不同的酸敏感两亲性嵌段共聚物,PEO-b-PEDMM17和PEO-b-PEDMM34.两个聚合物在水溶液中形成粒径约为60～200nm的球型聚集体,通过动态光散射、透射电镜、荧光探针等手段表征了所得聚集体.结果显示,疏水链段较短的共聚物的临界聚集浓度较高,形成的聚集体尺寸较小.核磁和荧光探针结果表明,胶束状聚集体在中性(pH7.4)水溶液中比较稳定,在酸性水溶液中其疏水核的极性因原酸酯的水解而增加.该类酸敏感胶束状聚集体有望用于肿瘤、细胞内给药等药物传递体系.     

支化侧链偶氮无规共聚物中空和类囊泡聚集体研究

研究了支化侧链型偶氮无规共聚物(PMAPB6P-AA)在THF/H2O混合溶液中的自组装行为.研究发现,通过缓慢增加体系的水含量,可以制备出具有中空结构的非球形聚集体.调节聚合物的初始浓度,可以得到不同粒径的聚集体.聚集体中偶氮生色团的光致异构化速率与异构化程度随聚合物初始浓度的增大而减小.在此基础上,采用更加缓慢的增加水含量的方法,使聚合物分子进行充分的疏水聚集与H-聚集,制备出类囊泡状聚集体.在紫外光照射条件下,观察到类囊泡聚集体发生了光致解聚集.     

新型疏水缔合聚合物P(AM/POEA)与表面活性剂的相互作用

采用粘度法、荧光探针和透射电镜研究了新型疏水缔合聚合物P(AM/POEA)和表面活性剂SDS和CTAB在水溶液中的相互作用. 聚合物P(AM/POEA)结构中, 疏水体(2-苯氧乙基丙烯酸酯)呈嵌段状无序地分布在聚丙烯酰胺主链上. 这类聚合物很容易和表面活性剂相互作用, 通过疏水缔合, 形成混合胶束状聚集体, 导致溶液粘度剧增. 随聚合物溶液中SDS的加入, 溶液粘度发生大幅度起伏变化, 出现最大值. 粘度最大值对应的表面活性剂浓度c_S,max位于表面活性剂CMC附近, 并发现它的位置不随聚合物微结构而变化. 然而它们缔合作用的增粘程度却与聚合物疏水体含量X_H及疏水嵌段尺寸N_H有关. 在实验浓度范围内, X_H和N_H愈大, 溶液的粘度越高. 此外用透射电镜直接观察到聚合物/表面活性剂体系中聚集体的交联结构形貌.     

双亲嵌段共聚物PSt-b-PAA在甲苯中的自聚集行为

以α-溴乙苯为引发剂,溴化亚铜为催化剂,2,2'-联吡啶为配体,用原子转移自由基聚合(ATRP)法合成了结构一定的嵌段共聚物聚苯乙烯-b-聚丙烯酸丁酯(PSt-b-PBA).经水解制备了双亲性嵌段共聚物聚苯乙烯-b-聚丙烯酸(PSt-b-PAA);采用单溶剂溶解法配制了PSt-b-PAA在甲苯中的反胶束溶液;以极性荧光化合物N-1-萘乙二胺盐酸盐(NEAH)为极性微区探针,用荧光光谱法并配合透射电镜观察探索了双亲嵌段共聚物PSt-b-PAA在甲苯溶液中的自聚集行为,考察了双亲性嵌段共聚物浓度、链结构及温度等因素对反胶束化行为的影响规律.结果表明,亲水链PAA短而亲油链PSt长的双亲嵌段共聚物PSt-b-PAA,用单溶剂溶解法可使其在甲苯中发生自聚集,形成以亲水段为核,疏水段为壳的星状反胶束结构;反胶束为10-20nm的球形聚集态结构;PSt-b-PAA的自聚集行为及临界胶束浓度与分子链的微结构和温度等因素相关,且随着共聚物浓度的增大,小胶束会逐渐结合形成大的纺垂状聚集体.     

PEO-PPO嵌段聚醚的聚集行为及其在药物载体领域的应用

聚氧乙烯-聚氧丙烯(PEO-PPO)嵌段聚醚是一类非离子型高分子表面活性剂,其结构具有很多独特之处:分子结构具有丰富的可设计性,强烈的温度依赖的胶束化行为以及溶剂选择的多样性,这些都极大丰富了其在溶液中自组装形成聚集体的研究内容。本文结合本课题组的工作着重综述了近期国内外有关线型和支状PEO-PPO嵌段聚醚在水溶液中聚集特性的研究进展,以及酸/碱、无机盐、醇类、小分子表面活性剂和聚合物等添加剂对其聚集行为的影响。PEO-PPO嵌段聚醚具有良好的生物相容性,在水溶液中能形成以PPO链段为疏水内核, PEO链段为亲水外壳的胶束结构,该结构非常适于作为疏水药物的载体。因此本文还综述了此类嵌段聚醚作为药物载体方面的研究成果,期望为药物剂型的开发研究提供理论支持。     

盐对刷型两亲聚合物聚集行为的调控作用

两亲聚合物奇异的功能特性源于分子独特的骨架结构和在溶液中的自组装聚集行为. 本文向以2-丙烯酰胺基-十二烷基磺酸(AMC₁₂S)与2-丙烯酰胺基-2-甲基丙磺酸(AMPS)进行无规共聚所制备的AMPS-AMC₁₂S刷型两亲聚合物溶液体系中引入不同用量的NaCl, 采用稳态荧光、动态光散射(DLS)和透射电子显微镜(TEM)系统考察NaCl 对聚合物聚集行为的调控作用. 研究发现, 聚合物结构中疏水侧链含量越低, NaCl 对聚集行为的调控作用越强; NaCl浓度增加会明显降低聚合物的临界聚集浓度; 与此同时, 聚合物分子链自组装由分子间的聚集方式向分子内的聚集方式转变, 形成的聚集形态由大型多分子聚集体变化为尺寸数百分之一的单聚体.     

疏水缔合聚丙烯酰胺与双子表面活性剂的自组装

通过荧光光谱、动/静态激光光散射研究了疏水缔合聚丙烯酰胺(HAPAM)自组装行为及双子表面活性剂(双十四酸乙二酯双磺酸盐(DMES-14))对其的影响.实验结果表明:聚合物HAPAM在溶液中能够通过自组装形成疏水微区,表现出芘的发射光谱中第一振动峰(373nm)与第三振动峰(383nm)的荧光强度之比(I1/I3)值随聚合物浓度的增大而下降,当聚合物HAPAM浓度(CP)达到一定值后,I1/I3值不再变化;当加入表面活性剂时,HAPAM能够与双子表面活性剂在溶液中形成混合胶束,在聚合物浓度一定时,I1/I3值随表面活性剂浓度(CS)的增大急速下降,当表面活性剂浓度达到30mg·L-1时,I1/I3值趋于恒定;当表面活性剂浓度一定时,聚合物/表面活性剂二元体系中聚集体的聚集数随HAPAM浓度的增大出现先下降再增加的过程;一定量的双子表面活性剂对HAPAM分子间的缔合起促进作用,过量的双子表面活性剂对HAPAM分子间的缔合起抑制作用,使HAPAM的表观重均分子量(Mw,a)、均方根回转半径()和流体力学半径()随表面活性剂浓度增加先增大后减小,而HAPAM的/比值则随表面活性剂浓度增大出现一定程度的上升,表明HAPAM分子链段变得相对舒展.     

表面活性单体NaAMC_(14)S/丙烯酰胺共聚物的分子链微结构与疏水缔合性

在实施丙烯酰胺型阴离子表面活性单体2-丙烯酰胺基十四烷磺酸钠(NaAMC14S)与丙烯酰胺(AM)水溶液均相共聚合过程中,分别通过改变AM与NaAMC14S的投料比、改变外加电解质NaCl的加入量以及引发剂的用量,制备了分子链微结构系列变化的具有微嵌段结构的共聚物NaAMC14S/AM;采用荧光探针法与表观粘度法研究了共聚物分子链微结构与其疏水缔合性能之间关系,探索了共聚物分子链中疏水微嵌段含量、疏水微嵌段长度及共聚物分子量诸微结构因数对共聚物疏水缔合性的影响.结果表明,共聚物NaAMC14S/AM的疏水缔合性随着疏水微嵌段含量的增加而增强,随着疏水微嵌段长度的增长而增强,当疏水微嵌段含量和嵌段长度一定时,共聚物的疏水缔合性随分子量的增大而增强.     

含十二烷端基聚乙二醇-b-聚(N-丙烯酰脯氨酸甲酯)两嵌段在水溶液中的可逆再组装

以RAFT聚合制备了十二烷基末端聚乙二醇-b-聚(N-丙烯酰脯氨酸甲酯)两嵌段聚合物D12-EA,并用体积排除色谱和核磁氢谱表征了聚合物的结构。结合紫外-可见光(UV-Vis)、动态光散射(DLS)、静态光散射(LLS)、透射电镜(TEM)以及变温核磁氢谱(1 H NMR)研究了其在水溶液中的可逆再组装行为。不同于普通刺激响应性两嵌段在水溶液中由单分子链组装为纳米聚集体,在温度低于温敏性聚丙烯酰脯氨酸甲酯嵌段(A嵌段)浊点(CP)时,D12-EA两嵌段水溶液自组装形成粒径为20nm的球形胶束;而当温度高于CP时,球形胶束能够可逆地再组装为粒径约90nm的囊泡。变温1 H NMR揭示了当温度高于CP时,A嵌段由亲水壳层迁移至疏水核层,从而使体系再组装为自由能更低的结构。     

Influence of hydrophobe content and salt concentration on dilute solution behaviour of hydrophobically modified ionic polymers from diallylammonium salts/sulfur dioxide cyclocopolymerization: Light scattering and fluorescence spectroscopy

Novel hydrophobically modified polyelectrolytes were synthesized using the cyclocopolymerization of sulfur dioxide, N,N-diallyl-N-carboethoxymethylammonium chloride and the hydrophobic monomer N,N-diallyl-N-octadecylammonium chloride. Aggregation of these polymers in aqueous solutions was characterized in the dilute regime by static light scattering and fluorescence spectroscopy as a function of hydrophobe content and NaCl concentration. Copolymers were observed to associate at very low concentrations (0.005 wt%). The copolymer is capable of associating at this very low polymer concentration because of the extended length of the hydrophobic monomer (C₁₈) that can reach far enough from the backbone to avoid electrostatic repulsion. Aggregation of the polymers increased with increasing hydrophobe content. Upon addition of salt, the apparent molecular weight of polymer aggregates decreased as a result of neutralization of the charges. At high salt concentrations, the size of the polymer aggregates was observed to increase again as a result of increased polarity of the solvent that resulted in more hydrophobic association.     

含树枝体疏水缔合聚合物——聚醚树枝体改性聚丙烯酰胺的合成和性质

疏水缔合聚合物是一类含有少量疏水基团的水溶性功能高分子.在水溶液中,这类聚合物在疏水作用驱动下容易发生缔合,并伴随产生独特的缔合行为和溶液性质,因此研究这类聚合物具有重要的理论和应用意义.     

新型疏水缔合丙烯酰胺/2-苯氧乙基丙烯酸酯共聚物的合成与性质

采用胶束共聚方法合成了一种新型的疏水缔合共聚物 ,它由丙烯酰胺 (AM)和少量的 2 苯氧乙基丙烯酸酯 (POEA) (<1 0mol% )组成 ,具有良好的水溶性 .当溶液浓度超过一定值c 后 ,由于分子间的疏水缔合 ,产生很大的增粘作用 .研究了不同聚合条件下包括单体浓度、投料比和SMR值对聚合物的结构和性能的影响 .实验结果表明 ,聚合物的粘度性质和缔合行为取决于其分子量的大小、疏水单体含量及其嵌段的长度和分布 .     

Aggregation behaviour of hydrophobically modified poly(allylammonium) chloride

 The behaviour of hydrophobically modified poly(allylammonium) chloride having octyl, decyl, dodecyl and hexadecyl side chains has been studied in aqueous solution using fluorescence emission techniques. Micropolarity studies using the I ₁/I ₃ ratio of the vibronic bands of pyrene show that the formation of hydrophobic microdomains depends on both the length of the side chain and the polymer concentration. The I ₁/I ₃ ratio of the polymers with low hydrophobe content (less than 5% mol) changes substantially when reaching a certain concentration. These changes are assigned to aggregation originating from interchain interactions. This behaviour is also confirmed by the behaviour of the monomer/excimer emission intensities of pyrenedodecanoic acid used as a probe. For polymers having dodecyl side chains and hydrophobe contents higher than 10%, aggregates are formed independently of the polymer concentration. Anisotropy measurements show that microdomains resulting from the inter- and/or intramolecular interactions are similar to those observed for cationic surfactants. Viscosity measurements show that the coil dimensions are substantially decreased for the polymers having high hydrophobe contents, indicating intramolecular associations. Received: 10 November 1999/Accepted: 7 April 2000     

醇与十二烷基磺酸钠胶束组成和尺寸相关性的研究

用稳态荧光法研究了正戊醇、正己醇和正庚醇与烷基磺酸钠形成的胶束组成和尺寸的相关性。结果表明:在一定AS浓度下,醇-AS胶束的Ni随醇浓度增加出现最小值,但其NA则一直增大。当X_A~m增大时,正戌醇、正己醇-AS胶束R_m有明显的最小值。醇碳氢链越长,上述作用越大。     

Effects of hydrophobic substituents and salt on core-shell aggregates of hydrophobically modified chitosan: light scattering study

In this study we examine two methods of enhancement of aggregation of hydrophobically modified chitosan in dilute aqueous solutions: by increasing the content of n-dodecyl substituents, favoring hydrophobic association, and by increasing the amount of added low molecular weight salt, screening the electrostatic repulsion between similarly charged aggregating chains. By static and dynamic light scattering it was demonstrated that at the growth of the content of hydrophobic groups in the polymer (2-4 mol %) and of the amount of salt in solution (0.025-0.1 M) the weight fraction of aggregates increases, but the aggregation number remains unchanged. This behavior was attributed to the core-shell structure of the aggregates, which provides a low surface energy and strong attraction of associating groups inside the core. At the same time, the effects of the content of hydrophobic groups in the polymer and the ionic strength of the solution on the radii of the aggregates are quite different. Increasing the content of hydrophobic groups induces growth of the gyration radii of the aggregates, but does not affect their hydrodynamic radii. These data suggest the expansion of the hydrophobic core of the aggregates and the contraction of their highly swollen shell. On the other hand, increasing the salt concentration leads to a decrease of both the gyration and hydrodynamic radii of the aggregates, which is due to partial screening of electrostatic repulsion between similarly charged units and lowering of the osmotic pressure of counterions confined inside the aggregates.     

Aggregation Behavior of Polyether Block Copolymers with Dendritic Structure in Aqueous Solutions

Two dendritic block copolymers with the same contents of PPO and PEO but different branches and blocks were synthesized by anion polymerization. Their aggregation behavior and aggregation morphology were investigated by steady-state fluorescence and transmission electron microscopy. For SD64 copolymer with PPO-PEO diblock branch, it can be proved that only intermolecular aggregates are formed, the aggregation number and aggregation diameter are increased with concentration. Whereas for SD343 dendritic copolymer with PPO-PEO-PPO triblock branch, hydrophobic PPO chains located on the edge of SD343 copolymers can associate within the same polymer chain and also between different polymer chains, so the aggregates were inclined to change from intramolecular micelles to intermolecular clusters with concentration increasing.     

Aggregation of dextran hydrophobically modified by sterically-hindered phenols in aqueous solutions: Aggregates vs. single molecules

The hydrodynamic properties of dextrans hydrophobically modified by sterically-hindered phenols in aqueous solution were characterized by a combination of Cryogenic Transmission Electron Microscopy (Cryo-TEM), fluorescent spectroscopy, and Dynamic Light Scattering (DLS). All solutions investigated contained aggregates the structure, shape, and critical aggregation concentration of which are influenced by the amount of the inserted phenol groups in the polymer matrix. We found that increasing of temperature enhances aggregation. It was established that the critical aggregation concentration could be well approximated by a logarithmic function of the substitution degree of the glycoside units. The results suggest that the proportion of aggregates is nevertheless negligible in comparison with the proportion of single molecules.     

Effects of polymer aggregation and quencher size on amplified fluorescence quenching of conjugated polyelectrolytes

The fluorescence of conjugated polyelectrolytes (CPEs) is efficiently quenched by low concentrations of quenchers with opposite charges. We have reported the close correlation between this amplified quenching phenomenon and CPE chain aggregation. In this paper, we further demonstrate the profound correlation between the fluorescence quenching efficiency, CPE chain aggregation, and quencher molecular size. Aggregation of a poly(phenylene ethynylene)-type CPE (PPE-CO2-) is induced by the addition of either water or Ca2+ to methanol solution, as indicated by absorption, fluorescence, dynamic light scattering, and fluorescence microscope measurements. For quencher ions with a small molecular size, such as methyl viologen (MV2+), either the loose (induced by the addition of Ca2+) or the compact (induced by the addition of water) CPE chain aggregates are beneficial to the fluorescence quenching. For quencher ions with large molecular size, such as tris(4,7-diphenyl-1,10-phenanthroline)ruthenium (Ru(dpp)32+), however, the loose chain aggregates are found to be favorable for quenching, while the quenching efficiency is lower for the compact polymer aggregates present in aqueous solution.