“镁条燃烧”实验在初中化学中的作用及实施

通过比较,分析"镁条燃烧"实验在不同版本的义务教育化学教科书中围绕核心知识所发挥的作用。重点对"镁条燃烧"实验在"质量守恒定律"学习过程中的适切性进行讨论,通过对反应原理的复杂性、实验结果的多样性、实验过程的危害性等方面的分析,提出了一些关于"镁条燃烧"实验操作的实施建议。     

化学史教学案例——水分子中的化学史

质量守恒定律和阿伏加德罗定律是高一学生熟悉的两大基本定律,绝大多数学生,甚至是教师都认为这些定律无非是前人的经验总结而已.事实上质量守恒定律等基本定律的发现导致了原子学说的问世,阿伏加德罗定律的确立,对于确定分子组成、进而确定元素的相对原子质量具有重大意义.可以说没有阿伏加德罗定律就没有正确的相对原子质量、就没有周期律、没有近现代化学的发展.显然向学生揭示这些原理在学科发展中的重要作用极具教育价值.本案例以水为载体,把学生放在一个反思者的角度,在追寻元素、原子、分子等基本概念的历史生成过程中体会质量守恒定律、阿伏加德罗定律对化学发展的重大意义.     

反应体系中的独立变量问题

一、引论以质量守恒定律为基础的化学反应计量学,规定了反应体系中组分(试剂和产物)变化时所遵循的计量关系。这种关系是化学反应过程中各组分变化间必然有的限制。明确限制条件的数目对于决定体系中独立变量数是重要的。在许多经典的教科书中这个独立变量数被称为独立反应数。独立反应问题是长期以来人     

关于“质量守恒定律”化学史教学的几个问题的讨论

列举了进行"质量守恒定律"化学史教学过程中常见的几个问题,通过对化学史著作和教科书的分析,对质量守恒定量的发现者、发现时间、发现过程和进行相关的化学史教学的视角提出不同观点.     

间歇反应器内醋酸丁酯酯化反应与渗透汽化集成过程的模型计算

 建立了一个间歇反应器内酯化反应与渗透汽化集成过程的数学模型, 用于描述反应和脱水同时进行的过程. 该模型考虑了反应体系中所有组分的渗透量影响以及混合物的非理想热力学行为. 选择乙酸和正丁醇生成醋酸丁酯的酯化反应与 PVA 膜渗透汽化集成过程为研究体系, 将模型结果与文献中已报道的实验数据进行对比, 验证了该模型的有效性. 结果表明, 采用渗透汽化脱除酯化反应的水分将提高酯的产率. 对温度、反应物初始比、膜面积与反应体积比以及催化剂浓度几种操作条件对集成过程性能影响进行了参数的分析. 根据结果讨论得到该膜过程与反应集成过程的优化操作条件.     

基于建构化学基本观念的对比教学法——以“质量守恒定律”教学设计为例

在质量守恒定律的教学中,将对比教学法巧妙地运用于史料知识、实验探究、数据分析中,有助于实现学生宏观表征从"质"到"量"的突破,微观表征从"静"到"变"的转化,符号表征从"孤立"到"联系"的完善,从而建立宏观-微观-符号表征之间的联系,学生对定律的认识在从模糊到清晰并臻于科学的过程中,构建物质变化观。     

微量元素与衰老的关系--浅谈基因环境决定论学说

从衰老的基因环境决定论学说中环境作用因素方面讨论了微量元素与衰老的关系。以及微量元素的“量”对衰老发生、发展的影响,对照分组实验方法确定微量元素与疾病的因果关系及微量元素对预防衰老研究的意义。     

一则质量守恒定律实验最佳效果研究

通过实验与分析,说明了利用铁钉与硫酸铜溶液反应进行质量守恒定律的探究实验中,经常出现与教材图示不相同的实验现象的原因,对实验现象如何正确描述作出了科学界定,明确了实验产生最佳效果的条件,纠正了人们对这一实验现象长期存在的不当认识,弥补了《义务教育课程标准实验教科书.教师教学用书》资料的不足,对该实验教学改进具有积极的指导价值。     

气相反应对CVD生长石墨烯的影响

化学气相沉积法(CVD)制备的石墨烯薄膜具有质量高、均匀性好、层数可控且可放大等优点,近年来受到了学术界和工业界的广泛关注。在高温CVD生长过程中,除衬底表面的反应外,气相反应同样会影响石墨烯的生长行为和薄膜质量。本文将综述气相反应对CVD生长石墨烯的影响：首先对CVD体系内的气相传质过程和气相反应进行了详细讨论;随后系统介绍了基于气相调控提高石墨烯的结晶性、洁净度、畴区尺寸、层数和生长速度的相关策略及其机理;最后对气相反应影响CVD生长石墨烯的规律进行总结,并展望了未来可能的发展方向。     

不同热塑性树脂改性热固性树脂体系反应诱导相分离过程的时间/温度依赖性

对几种不同热塑性树脂改性热固性树脂体系反应诱导相分离过程,包括UCST(最高互溶温度)、LCST(最低互溶温度)体系和含有复杂多步反应体系,在耐高温高分辨热台显微镜、流变仪和小角激光光散射仪上进行了研究.发现体系的反应诱导相分离时间/温度关系遵循Arrhenius方程.其相分离活化能对体系反应速率、粘弹性变化、体系中热塑性树脂的含量和分子量不敏感,也不受相分离检测手段的影响,而依赖于树脂化学环境相容性和交联反应的温度依赖性.对这一共性的物理本质进行了讨论.     

Physicochemical foundations of synthesis of new ferromagnets from chalcopyrites A<Superscript>II</Superscript>B<Superscript>IV</Superscript>C<Stack><Subscript>2</Subscript><Superscript>V</Superscript></Stack>

The results of studying phase equilibria of ternary A^IIB^IVC^V systems have been reported. Physicochemical foundations have been developed for the synthesis of new ferromagnets with Curie temperatures above room temperature structurally compatible with basic semiconducting materials. Methods of synthesis and physicochemical properties of manganese-doped A^IIB^IVC₂^V ferromagnets have been described. The results of theoretical simulation of magnetic properties have been considered and basic approaches to the explanation of the emergence of ferromagnetism in A^IIB^IVC₂^V doped with 3d metals have been surveyed. The most promising ways to produce and study dilute magnetic semiconductors as spintronics materials have been presented.     

Determination of the enthalpy of fusion of K<Subscript>3</Subscript>TaO<Subscript>2</Subscript>F<Subscript>4</Subscript> and KTaF<Subscript>6</Subscript>

Areas of fusion and crystallization peaks of K₃TaO₂F₄ and KTaF₆ were measured using the DSC mode of a high-temperature calorimeter (SETARAM 1800 K). On the basis of these quantities, considering the temperature dependence of the calorimeter sensitivity, values of the fusion enthalpy of K₃TaO₂F₄ at the fusion temperature of 1181 K of (43 ± 4) kJ mol⁻¹ and of KTaF₆ at the fusion temperature of 760 K of (8 ± 1) kJ mol⁻¹ were determined.     

2,4‐Di­nitro­phenyl­hydrazones of 2,4‐di­hydroxy­benz­aldehyde, 2,4‐di­hydroxy­aceto­phenone and 2,4‐di­hydroxy­benzo­phenone

In 2,4‐di­hydroxy­benz­aldehyde 2,4‐di­nitro­phenyl­hydrazone N,N‐di­methyl­form­amide solvate {or 4‐[(2,4‐di­nitro­phenyl)­hydrazono­methyl]­benzene‐1,3‐diol N,N‐di­methyl­form­amide solvate}, C₁₃H₁₀N₄O₆·C₃H₇NO, (X), 2,4‐di­hydroxy­aceto­phenone 2,4‐di­nitro­phenyl­hydrazone N,N‐di­methyl­form­am­ide solvate (or 4‐{1‐[(2,4‐di­nitro­phenyl)hydrazono]ethyl}benzene‐1,3‐diol N,N‐di­methyl­form­amide solvate), C₁₄H₁₂N₄O₆·C₃H₇NO, (XI), and 2,4‐di­hydroxy­benzo­phenone 2,4‐di­nitro­phenyl­hydrazone N,N‐di­methyl­acet­amide solvate (or 4‐­{[(2,4‐di­nitro­phenyl)hydrazono]phenyl­methyl}benzene‐1,3‐diol N,N‐di­methyl­acet­amide solvate), C₁₉H₁₄N₄O₆·C₄H₉NO, (XII), the molecules all lack a center of symmetry, crystallize in centrosymmetric space groups and have been observed to exhibit non‐linear optical activity. In each case, the hydrazone skeleton is fairly planar, facilitated by the presence of two intramolecular hydrogen bonds and some partial N—N double‐bond character. Each molecule is hydrogen bonded to one solvent mol­ecule.     

Determination of the enthalpy of fusion of K<Subscript>3</Subscript>NbO<Subscript>2</Subscript>F<Subscript>4</Subscript>

Areas of fusion and crystallization peaks of K₃NbO₂F₄ were measured using the DCS mode of a high-temperature calorimeter (SETARAM 1800 K). On the basis of these quantities, considering the temperature dependence of the calorimeter sensitivity, the value of the fusion enthalpy of K₃NbO₂F₄ of (98 ± 6) kJ mol⁻¹ was determined at the fusion temperature of 1257 K.     

Coefficients of thermal expansion of KPb<Subscript>2</Subscript>Cl<Subscript>5</Subscript> and RbPb<Subscript>2</Subscript>Br<Subscript>5</Subscript> crystals

The temperature dependence of unit cell parameters for monoclinic KPb₂Cl₅ and tetragonal RbPb₂Br₅ crystals was studied in the range of 100–298 K. Linear and volume thermal expansion coefficients were determined.     

Effect of SO<Subscript>2</Subscript> on chlorination of Bi<Subscript>2</Subscript>O<Subscript>3</Subscript> + Fe<Subscript>2</Subscript>O<Subscript>3</Subscript> mixtures

The reaction of Bi₂O₃ + Fe₂O₃ mixtures with chlorine and SO₂ at 250–700°C is studied. At 300–500°C, the degree of bismuth chloride sublimation from the oxide mixture increases in the presence of SO₂. Chemical sublimation of FeCl₃ occurs after BiCl₃ is virtually completely recovered from the solid phase.     

Mechanism and kinetics of formation of La<Subscript>2</Subscript>SrFe<Subscript>2</Subscript>O<Subscript>7</Subscript> and Nb<Subscript>2</Subscript>SrFe<Subscript>2</Subscript>O<Subscript>7</Subscript>

Phase formation processes in the systems Ln₂O₃-SrO-Fe₂O₃ (Ln = La, Nd) in air in the temperature range 1200–1500°C were studied. The synthesis of the complex ferrites La₂SrFe₂O₇ and Nb₂SrFe₂O₇ involves the formation of the intermediate compounds LnFeO₃ and LnSrFeO₄ and occurs by the same mechanism as the synthesis of the corresponding aluminates, but much faster.     

Influences of <em>Dryopteris crassirhizoma</em> Extract on<em> </em>the Viability, Growth and Virulence Properties of <em>Streptococcus </em><em>m</em><em>utans</em><em></em>

Dryopteris crassirhizoma is traditionally used as an herbal remedy for various diseases, and has been identified in a previous study as a potential anti-caries agent. In this study, the effect of a methanol extract of D. crassirhizoma on the viability, growth and virulence properties of Streptococcus mutans, a cariogenic dental pathogen, was investigated. In addition, the phytochemical composition of the extract was analyzed. The extract showed bactericidal and bacteriostatic activity against oral bacteria (MIC and MBC of S. mutans: 62.5 and 250 μg/mL, respectively). At two times the MBC, the extract significantly eliminated S. mutans up to 99.9% after 1 h incubation. The extract also dose-dependently reduced growth rates of S. mutans at sub-MIC levels. Furthermore, at sub-MIC levels, virulence properties (acid production, acid tolerance, glucosyltransferase activity and sucrose-dependent adherence) of S. mutans were also inhibited in a dose-dependent manner. GC-MS analysis revealed the presence of mono and disaccharides (44.9%), fatty acids (12.3%) and sugar alcohols (6.8%) in the extract. These data indicate that the extract might be useful for the control of dental caries.     

Projection of the liquidus surface of the Sb<Subscript>2</Subscript>Te<Subscript>3</Subscript>-Gd<Subscript>2</Subscript>Te<Subscript>3</Subscript>-Bi<Subscript>2</Subscript>Te<Subscript>3</Subscript> system

Phase equilibria in the Sb₂Te₃-Gd₂Te₃-Bi₂Te₃ ternary system have been studied using differential thermal analysis, namely, X-ray powder diffraction, microstructure examination, thermodynamic analysis, and microhardness and alloy density measurements. Phase diagrams of some polythermal joins and liquidus surface have been constructed. The regions of primary crystallization of phases and the coordinates of all invariant and univariant equilibria in the system under investigation have been established.