Subphase pH effect on composition and structure of Fe(III) arachidate monolayers

The arachidic acid monolayers on Fe(III) subphase surfaces with various pH values have been studied. The π–A isotherms of monolayers and Fourier transform infra-red (FTIR) spectra of Langmuir–Blodgett (LB) films show that the films obtained on different pH subphases with a concentration of Fe(III) 5×10⁻⁵ M have different compositions. At low pH (2.4), the film appears to be almost 100% acid. The content of Fe(III) arachidate increases with increasing pH, at pH 3.7, the film appears to be 100% salt; and the content of salt decreases with pH larger than 3.7. The transmission electron microscope (TEM) observations show that the monolayer structures changed from patch aggregates formed by Fe(III) arachidate at low pH to a network or dotted structures formed by hydrolysates of Fe(III) at high pH. The Brewster angle microscopy (BAM) experiments show the different monolayer behaviors at various pH. These results indicate that the subphase pH greatly influenced the arachidic acid monolayers.     

Mechanical properties and structure of particle coated interfaces: influence of particle size and bidisperse 2D suspensions

We report surface pressure-area (Pi-A) isotherms of bidisperse mixtures of anionic polystyrene latex particles at a water/n-decane interface as well as optical photographs of the interface for various compressions and mixture ratios. In the case of mixtures of 3 and 5 mum particles, we observe crystalline layers at high or low concentration ratios, where the "impurity" particles concentrate at the grain boundaries of the crystalline structure. At intermediate ratios, the layers become highly disordered. However, in both cases, we show that the shape of the isotherms remains unchanged. In the case of the mixtures of 9 mum particles with either 3 or 5 mum particles, the smaller particles aggregate around the larger particles through capillary interaction resulting in the formation of large fractal aggregates. At high compression, these layers contain holes that seem very compressible. As a result, the surface pressure isotherms show a smaller surface pressure jump than for other mixtures.     

A straightforward way to form close-packed TiO2 particle monolayers at an air/water interface

The aim of this study was to analyze if and how monolayers of TiO(2) particles could be directly formed at the air/water interface and if these monolayers could be transferred to a solid surface. TiO(2) particles with diameters of 300 nm, 500 nm, 1 μm, 5 μm, 10 μm, and 20 μm formed stable monolayers at pH 2. At low surface pressures, the particles formed small two-dimensional aggregates. Particles up to a radius of 5 μm displayed close packing at increased surface pressures. Particles of 10 μm radius formed a loose network, which is attributed to the strong adhesion caused by the weight-induced lateral capillary attraction. Every monolayer of particles could be transformed to a solid surface by the Langmuir-Blodgett deposition. At pH 6 or 11, the particles did not form stable monolayers at the air/water interface. They were instead dispersed in the aqueous phase and eventually sank to the bottom of the trough. At pH 11 the monolayer could, however, be stabilized by the addition of salt (0.5 M NaCl). The results are interpreted based on a changed wettability of the particles depending on pH and salt concentration.     

Effect of colloidal particle size on adsorbed monodisperse and bidisperse monolayers

Coating hydrogel films or microspheres by an adsorbed colloidal shell is one synthesis method for forming colloidosomes. The colloidal shell allows control of the release rate of encapsulated materials, as well as selective transport. Previous studies found that the packing density of self-assembled, adsorbed colloidal monolayers is independent of the colloidal particle size. In this paper we develop an equilibrium model that correlates the packing density of charged colloidal particles in an adsorbed shell to the particle dimensions in monodisperse and bidisperse systems. In systems where the molar concentration in solution is fixed, the increase in adsorption energy with increasing particle size leads to a monotonic increase in the monolayer packing density with particle radius. However, in systems where the mass fraction of the particles in the adsorbing solutions is fixed, increasing particle size also reduces the molar concentration of particles in solution, thereby reducing the probability of adsorption. The result is a nonmonotonic dependence of the packing density in the adsorbed layer on the particle radius. In bidisperse monolayers composed of two particle sizes, the packing density in the layer increases significantly with size asymmetry. These results may be utilized to design the properties of colloidal shells and coatings to achieve specific properties such as transport rate and selectivity.     

亚相pH对气水界面上VE/DPPC单分子膜的影响

通过表面压－分子面积等温线的测定，考察了亚相ｐＨ对气水界面上的维生素Ｅ（ＶＥ）／二棕榈酰基磷脂酰胆碱单分子膜的影响。亚相ｐＨ降低不改变ＤＰＰＣ单分子膜的崩裂压，但使ＶＥ单分子膜的崩裂压明显增大，不改变ＶＥ单分子膜的平均分子面积，但使ＤＰＰＣ单分子膜凝缩，低表面压下，ＶＥ对ＤＰＰＣ单分子膜的膨胀作用在纯水上很小，在ｐＨ为１的亚相上则很明显，这提示在低ｐＨ的亚相上，ＶＥ／ＤＰＰＣ单分子膜中的极性头基间     

Dynamic Behaviors and Morphology Change of Anionic Phospholipid DPPG Monolayer Caused by Bovine Serum Albumin at Air-Water Interface

The interaction between bovine serum albumin (BSA) and the anionic 1.2-dipalmitoyl-snglycero- 3-(phospho-rac-(1-glycerol)) (sodium salt) (DPPG) phospholipid at different subphase pH values was investigated at air-water interface through surface pressure measurements and atomic force microscopy (AFM) observation. By analyzing surface pressure-mean molecular area (π-A) isotherms, the limiting molecular area in the closed packing state-the concentration of BSA (A_lim-[BSA]) curves, the compressibility coefficient-surface pressure (C_S^-1-π) curves and the difference value of mean molecular area-the concentration of BSA (ΔA-[BSA]) curves, we obtained that the mean molecular area of DPPG monolayer became much larger when the concentration of BSA in the subphase increased at pH=3 and 5. But the isotherms had no significant change at different amount of BSA at pH=10. In addition, the amount of BSA molecules adsorbed onto the lipid monolayer reached a threshold value when [BSA]>5×10^-8 mol/L for all pHs. From the surface pressure-time (π-t) data, we obtained that desorption and adsorption processes occurred at pH=3, however, there was only desorption process occurring at pH=5 and 10. These results showed that the interaction mechanism between DPPG and BSA molecules was affected by the pH of subphase. BSA molecules were adsorbed onto the DPPG monolayers mainly through the hydrophobic interaction at pH=3 and 5, and the strength of hydrophobic interaction at pH=3 was stronger than the case of pH=5. At pH=10, a weaker hydrophobic interaction and a stronger electrostatic repulsion existed between DPPG and BSA molecules. AFM images revealed that the pH of subphase and [BSA] could affect the morphology features of the monolayers, which was consistent with these curves. The study provides an important experimental basis and theoretical support to understand the interaction between lipid and BSA at the air-water interface.     

Langmuir–Blodgett Monolayers and Films of Alkylated Tetraazacrowns Containing Metal Ions and Nanoparticles

The behavior of individual 1,7-dicetyltetraaza-12-crown-4 and its mixture with 1,4,7,10-tetracetyltetraaza-12-crown-4 in the Langmuir monolayers at the subphases containing Cu(II) ions or colloidal gold particles is studied. Based on the compression isotherms, the complexing ability of these amphiphilic cyclenes in a monolayer at the surface of aqueous dilute solutions of copper salt is established. It was shown that the fraction of complexes in a monolayer is proportional to the copper ion concentration in the subphase. Using surface balance, atomic force microscopy, and electron microscopy methods, it was revealed that the monolayer of dicetylcyclene at the surface of gold hydrosol binds nanoparticles from the subphase; the number of particles bound by the monolayer is proportional to their content in the hydrosol. The Langmuir–Blodgett films (LBF) of dicetylcyclene are prepared; their ability to bind copper ions from solution was disclosed by quartz crystal microbalance. The LBFs of dicetylcyclene containing gold nanoparticles in each layer are assembled.     

Metal ion-induced H-aggregation of a water-soluble anionic dye Congo red (CR) in Langmuir–Blodgett (LB) film

Present communication reports the preparation of Langmuir monolayer of water-soluble anionic dye Congo red (CR) by allowing it to adsorb from the aqueous subphase onto the preformed Langmuir monolayer of anionic stearic acid using divalent metal cations Mg²⁺ as mediator. Isotherm and compressibility studies of SA-Mg-CR hybrid monolayer gave valuable information about the molecular organisation in the Langmuir monolayer. Absorption spectroscopic studies revealed the formation of H-aggregates in the hybrid Langmuir–Blodgett (LB) films fabricated at lower salt concentration in the subphase. Atomic Force Microscopic image gave visual evidence of distinct nanocrystalline domains in the LB monolayer film.     

Langmuir-Blodgett monolayers of InP quantum dots with short chain ligands

We demonstrate the organization of nearly monodisperse colloidal InP quantum dots at the air/water interface in Langmuir monolayers. The organization of the particles is monitored in situ by surface pressure-surface area measurements and ex situ by AFM measurements on films transferred to mica by Langmuir-Blodgett deposition. The influence of different ligands on the quality of the monolayer formed has been studied. We show that densely packed monolayers with little holes can be formed using short chain ligands like pyridine and pentamethylene sulfide. The advantage of using short chain ligands for electron tunneling to or from the quantum dots is demonstrated using scanning tunneling spectroscopy.     

Preparation, characterization, and application of polypropylene-clinoptilolite composites for the selective adsorption of lead from aqueous media

The miscibility, mechanical and morphological properties of mixed Langmuir and Langmuir-Blodgett monolayers prepared from the phospholipid 1,2-dipalmitoyl-sn-glycero-3-phosphocholine and the perfluorinated fatty acid perfluorooctadecanoic acid have been studied as a function of film composition and subphase salinity. It was demonstrated here, for the first time, that the extent of surfactant miscibility in mixed phospholipid-perfluoroacid monolayers, and hence the resulting mechanical properties of the monolayer film, can be controlled by altering the concentration of sodium ions in the underlying subphase. Elevated Na(+) concentrations resulted in lower net attractive interactions between film components, likely through specific ion adsorption to the negatively-charged perfluoroacid, along with decreased film elasticities. These results differ significantly from conventional fatty-acid-carboxylate monolayer systems in which film cohesion is typically enhanced through adsorption of cations to surfactant headgroups. Atomic force microscope images of films deposited onto solid mica substrates revealed that the films deposited from pure water formed multimolecular aggregates of surfactant, which could be attributed to the highly cohesive nature of the films, but the use of salt in the subphase diminished aggregate formation and resulted in the production of homogeneous monolayer films.     

Binary mixtures of cationic and anionic microgels

Colloidal behaviors of binary mixtures composed of cationic and anionic microgels are reported. Both microgels were synthesized by aqueous free radical precipitation polymerization using N-isopropylacrylamide and N,N'-methylenebisacrylamide but using different types of water-soluble initiators and comonomer. Effects of temperature and salt concentration on phase behaviors of binary mixtures of cationic and anionic microgels were investigated as well as single-species microgels by UV-vis spectroscopy. We found that the presence of a small amount of NaCl altered the dispersing behavior of the binary mixtures of cationic and anionic microgels when they were in hydrated and swollen states. In particular, scanning electron microscope observation clarified that the binary mixtures containing a small amount of NaCl were not flocculated, and microgels showed non-close-packed structures on a planar substrate in the dry state. Furthermore, flocculations formed when both microgels were in the swollen states could be redispersed by adding a small amount of NaCl and gently stirring. These tunable properties have not been observed in mixtures of hard particles, and are due to the coexistence of electrostatic interactions and steric hindrance of highly hydrated soft particles.     

Equilibrium structure and dynamics of (2R, 3R)-(+)-bis(decyloxy)succinic acid at the air-water interface

A twin-tailed, twin-chiral fatty acid, (2R,3R)-(+)-bis(decyloxy)succinic acid was synthesized and its two dimensional behavior at the air-water interface was examined. The pH of the subphase had a profound effect on the monolayer formation. On acidic subphase, stable monolayers with increased area per molecule due to hydrogen bonding and bilayers at collapse pressures were observed. Highly compressible films were formed at 40 degrees C, while stable monolayers with increased area were observed at sub-room temperatures. Langmuir monolayers formed on subphases containing 1 mM ZnCl2 and CaCl2 revealed two dimensional metal complex formation with Zn2+ forming a chelate-type complex, while Ca2+ formed an ionic-type complex. Monolayers transferred from the condensed phase onto hydrophilic Si(100) and quartz substrates revealed the formation of bilayers through transfer-induced monolayer buckling. Compression induced crystallites in 2D from monolayers and vesicle-like supramolecular structures from multilayers were the noted LB film characteristics, adopting optical imaging and electron microscopy. The interfacial monolayer structure studied through molecular dynamics simulation revealed the order and packing at a molecular level; monolayers adsorbed at various simulated specific areas of the molecule corroborated the (pi-A) isotherm and the formation of a hexagonal lattice at the air-water interface.     

Mixed monolayers of bovine serum albumin with a nonionic surfactant (Tween 80)

Mixed monolayers of bovine serum albumin (BSA) with a nonionic surfactant (Tween 80) are obtained by spreading solutions containing both components over the surface of a subphase (water with pH 6) over a wide range of solution compositions. According to compression-expansion isotherms, the mixed monolayers are of the condensed type when the BSA concentrations in the solution are far higher than or equal to the surfactant concentration. Such monolayers mostly consist of BSA-Tween 80 (1: 1) complexes. In contrast, a BSA monolayer is of the expanded type. When Tween 80 in the solution prevails over Tween 80, the monolayers become unstable. The results of this work pertain to the monitoring of the properties of protein-surfactant mixtures and design of Langmuir-Blodgett (LB) films.     

硬脂酸单分子膜上电沉积Ag膜的研究

通过电沉积方法,以气/液界面上形成的硬脂酸单分子膜为模板诱导沉积金属银膜.考察了镀液pH值、单分子膜表面压及沉积电位对银膜形貌及结构的影响.实验发现,酸性镀液的气/液界面上形成的单分子膜不能诱导沉积银,而在中性和碱性镀液的气/液界面上可以诱导银膜的生长.当单分子膜处于液态或固态时,气/液界面有银膜形成;液态单分子膜上的银膜生长速度较快,且银膜的结构一致.随着电极电位的升高,银膜沉积的速度加快,呈环状向外生长的圆形银膜逐渐变得不规则.将不同实验条件下的银膜转移出来,采用扫描电镜(SEM)、透射电镜(TEM)对银膜的结构与形貌进行了表征.研究表明,银首先在单分子膜上异相成核,由八面体构型逐渐发展成星型,最终在气/液界面形成具有松枝状微观结构的光亮银膜.     

Small solid particles and liquid lenses at fluid/fluid interfaces

The behaviour of small solid particles and liquid droplets at fluid interfaces is of wide interest, in part because of the roles they play in the stability of foams and emulsions. Here we focus on solid particles at liquid interfaces, both singly and in highly structured monolayers. We briefly mention small oil lenses on water in connection with the determination of line tension, τ. Particles are surface-active in the sense that they often adhere quite strongly to liquid surfaces, although of course they are not usually amphiphilic. The three-phase contact line around a particle at an interface is associated with an excess free energy resulting in a tendency of the line to contract (positive τ, which is a 1D analogue of surface tension) or to expand (negative τ). Positive line tension acts so as to push the contact angle of a particle with the fluid interface further away from 90°, i.e. to force the particle towards the more “wetting” of the two bulk phases. It also leads to activation barriers to entry and departure of particles from an interface. The behaviour of particle monolayers at octane/water interfaces is also discussed . It is found that, for monodisperse spherical polystyrene particles containing ionisable sulphate groups at the surface, highly ordered monolayers are formed. This appears to result from very long range electrostatic repulsion mediated through the oil phase. Surface pressure–surface area isotherms are discussed for particle monolayers and it is shown, using light microscopy, that at monolayer “collapse” particles are not expelled from the monolayers but rather the monolayer folds, remaining intact. This has an important bearing on methods, involving the use of the Langmuir trough, for the experimental determination of contact angles and line tensions in particulate systems. Received: 18 July 1999/Accepted: 30 August 1999     

Time-dependent complexation of glucose-reduced gold nanoparticles with octadecylamine Langmuir monolayers

We report on the reduction of aqueous chloroaurate ions by glucose to form gold nanoparticles of uniform size. We further demonstrate the complexation of these particles with octadecylamine (ODA) monolayers at the air-water interface. Pressure-area (pi-A) isotherms as a function of time of complexation revealed a significant expansion of the monolayer. Surface pressure variation with time for constant areas after spreading of the monolayer was carried out to observe the kinetics of complexation of the colloidal particles at the interface. The kinetics of complexation of the particles at the interface was also monitored by Brewster angle microscopy (BAM) measurements. Langmuir-Blodgett films of the particles complexed with ODA were formed at a subphase pH of 9 onto different substrates. Quartz crystal microgravimetry (QCM) was used to quantify the amount of particles deposited per immersion cycle of the quartz crystal. The LB films were further characterized by UV-vis and transmission electron microscopy (TEM) measurements. TEM measurements indicate a close packed and equidistant arrangement of colloidal particles in the LB film, probably due to hydrogen-bonding interactions.     

A study of the properties and composition of stearic acid monolayers on an aqueous subphase containing cadmium ions

Compression isotherms and chemical compositions of stearic acid (HSt) monolayers applied onto an aqueous subphase containing cadmium ions have been studied in a wide pH range. The data obtained have been used to calculate the dependences of surface elasticity E_2.5, change ΔA_2.5 in the surface area per molecule at a constant two-dimensional pressure in the monolayer of 2.5 mN/m, and change Δ|ζ| in the absolute value of the ζ potential of particles formed from the material of a monolayer collapsed on the surfaces of aqueous solutions with the same compositions on the pH of the subphase. The obtained data are in good agreement with each other and unambiguously attest to the dependences of the surface (E_2.5, ΔA_2.5) and electrosurface (Δ|ζ|) characteristics of the monolayers on their chemical composition. This leads us to make the reasonable suggestion that two alternative reactions may occur between cadmium ions and the HSt monolayer with the formation of two salts, CdSt₂ and Cd(OH)St.     

Structure and phase behavior of archaeal lipid monolayers

We report X-ray reflectivity (XRR) and grazing incidence X-ray diffraction (GIXD) measurements of archaeal bipolar tetraether lipid monolayers at the air-water interface. Specifically, Langmuir films made of the polar lipid fraction E (PLFE) isolated from the thermoacidophilic archaeon Sulfolobus acidocaldarius grown at three different temperatures, i.e., 68, 76, and 81 °C, were examined. The dependence of the structure and packing properties of PLFE monolayers on surface pressure were analyzed in a temperature range between 10 and 50 °C at different pH values. Additionally, the interaction of PLFE monolayers (using lipids derived from cells grown at 76 °C) with the ion channel peptide gramicidin was investigated as a function of surface pressure. A total monolayer thickness of approximately 30 ? was found for all monolayers, hinting at a U-shaped conformation of the molecules with both head groups in contact with the interface. The monolayer thickness increased with rising film pressure and decreased with increasing temperature. At 10 and 20 °C, large, highly crystalline domains were observed by GIXD, whereas at higher temperatures no distinct crystallinity could be observed. For lipids derived from cells grown at higher temperatures, a slightly more rigid structure in the lipid dibiphytanyl chains was observed. A change in the pH of the subphase had an influence only on the structure of the lipid head groups. The addition of gramicidin to an PLFE monolayer led to a more disordered state as observed by XRR. In GIXD measurements, no major changes in lateral organization could be observed, except for a decrease of the size of crystalline domains, indicating that gramicidin resides mainly in the disordered areas of the monolayer and causes local membrane perturbation, only.     

Preparation and characterization of poly-N-vinyl carbazole langmuir-blodgett films

Langmuir monolayers of poly-N-vinyl carbazole (PNVK) were obtained by dispensing PNVK dissolved in tetrahydrofuran onto an air-water interface. Surface pressure-area isotherms of mixed monolayer of the PNVK were studied under different subphase conditions such as temperature and pH of the subphase. It was demonstrated that the monolayer of PNVK remained stable over a temperature range of 10–40°C. The area per molecule of the solid phase was found to be 31Ų. These monolayers were transferred onto indium-tin-oxide-coated glass plates and characterized by spectroscopic and electrochemical techniques.     

Monolayer studies of single-chain polyprenyl phosphates

The monolayer properties of some single-chain polyprenyl phosphates (phytanyl, phytyl, and geranylgeranyl phosphates), which we regard as hypothetical primitive membrane lipids, were investigated at the air-water interface by surface pressure-area (pi-A) isotherm measurements. The molecular area/ pressure at various pH conditions dependence revealed the acid dissociation constants (pKa values) of the phosphate. The pKa values thus obtained at the air-water interface (pKa1 = 7.1 and pKa2 = 9.4 for phytanyl phosphate) were significantly shifted to higher pH than those observed in the bilayer state in water (pKa1 = 2.9 and pKa2 = 7.8). The difference in pKa values leads to a stability of the phosphate as both monolayer and bilayer states in a pH range of 2-6. In addition, the presence of ions such as sodium, magnesium, calcium, and lanthanum in the subphase significantly altered the stability of the polyprenyl phosphate monolayers, as shown by the determination of monolayer collapse and compression/expansion hysteresis. Although sodium ions in the subphase showed only a weak effect on the stabilization of the monolayer, addition of magnesium ions or of a small amount of calcium ions significantly suppressed the dissolution of the monolayer into the subphase and increased its mechanical stability against collapse. In contrast, the presence of larger amounts of calcium or of lanthanum ions induced collapse of the monolayers. Based on these experimental facts, a plausible scenario for the formation of primitive cell membrane by transformation of a monolayer to vesicle structures is proposed.