正丁胺对激光染料荧光谱影响的研究

用正丁胺作为碳源,采用射频辉光放电制备碳膜,选用激光染料R6G和聚乙二醇混合液作为蒸气源,采用单源热蒸发,在蒸发室与染料同时沉积得到混合膜,用拉曼光谱和红外光谱分析了碳膜的结构和键合方式,分析表明:碳膜中存在胺基团和氢原子.混合膜的荧光谱测量结果表明,认为正丁胺对染料荧光谱的影响是因为胺基和氢原子的存在.     

THE EFFECT OF CLAY DISPERSION ON THE CRYSTALLIZATION AND MORPHOLOGY OF POLYPROPYLENE／CLAY COMPOSITES

PP/clay composites with different dispersions, namely, exfoliated dispersion, intercalated dispersion and agglomerates and particle-like dispersion, were prepared by direct melt intercalation or compounding. The effect of clay dispersion on the crystallization and morphology of PP was investigated via PLM, SAXS and DSC. Experimental results show that exfoliated clay layers are much more efficient than intercalated clay and agglomerates of clay in serving as nucleation agent due to the nano-scale dispersion of clay, resulting in a dramatic decrease in crystal size (lamellar thickness and spherulites) and an increase of crystallization temperature and crystallization rate. On the other hand, a decrease of melting temperature and crystallinity was also observed in PP/clay composites with exfoliated dispersion, due to the strong interaction between PP and clay. Compared with exfoliated clay layers, the intercalated clay layers have a less important effect on the crystallization and crystal morphology. No effect is seen for samples with agglomerates and particle-like dispersion, in regard to melting temperature, crystallization temperature, crystal thickness and crystallinity.     

Contributions to the Chemistry of the Binary Compounds of the Transition Elements

Phase and structural relationships of the sulfur, selenium, and tellurium compounds of the 4d and 5d transition elements of groups IV to VII of the periodic system are discussed. Homologous elements behave very similarly with respect to the chalcogens, and this is particularly the case for niobium and tantalum, and for molybdenum and tungsten. However, zirconium, niobium, and molybdenum have a greater tendency towards formation of chalcogen-poor phases than their homologues hafnium, tantalum, and tungsten. Subchalcogenides are known only for zirconium and niobium. The number of phases and the tendency towards formation of solid solutions are considerably smaller among the tellurides than among the sulfides and selenides. The crystal structures of the telluride phases also differ from those of the sulfide and selenide phases of analogous composition. In addition, a review of the phase and structural relationships of the arsenic and antimony compounds of the 4d and 5d transition elements of groups V to VII is given.     

Residue‐centric modeling and design of saccharide and glycoconjugate structures

The RosettaCarbohydrate framework is a new tool for modeling a wide variety of saccharide and glycoconjugate structures. This report describes the development of the framework and highlights its applications. The framework integrates with established protocols within the Rosetta modeling and design suite, and it handles the vast complexity and variety of carbohydrate molecules, including branching and sugar modifications. To address challenges of sampling and scoring, RosettaCarbohydrate can sample glycosidic bonds, side‐chain conformations, and ring forms, and it utilizes a glycan‐specific term within its scoring function. Rosetta can work with standard PDB, GLYCAM, and GlycoWorkbench (.gws ) file formats. Saccharide residue‐specific chemical information is stored internally, permitting glycoengineering and design. Carbohydrate‐specific applications described herein include virtual glycosylation, loop‐modeling of carbohydrates, and docking of glyco‐ligands to antibodies. Benchmarking data are presented and compared to other studies, demonstrating Rosetta's ability to predict glyco‐ligand binding. The framework expands the tools available to glycoscientists and engineers. © 2016 Wiley Periodicals, Inc.     

Semiconductor quantum dots and metal nanoparticles: syntheses,optical properties,and biological applications

We review the syntheses, optical properties, and biological applications of cadmium selenide (CdSe) and cadmium selenide–zinc sulfide (CdSe–ZnS) quantum dots (QDs) and gold (Au) and silver (Ag) nanoparticles (NPs). Specifically, we selected the syntheses of QDs and Au and Ag NPs in aqueous and organic phases, size- and shape-dependent photoluminescence (PL) of QDs and plasmon of metal NPs, and their bioimaging applications. The PL properties of QDs are discussed with reference to their band gap structure and various electronic transitions, relations of PL and photoactivated PL with surface defects, and blinking of single QDs. Optical properties of Ag and Au NPs are discussed with reference to their size- and shape-dependent surface plasmon bands, electron dynamics and relaxation, and surface-enhanced Raman scattering (SERS). The bioimaging applications are discussed with reference to in vitro and in vivo imaging of live cells, and in vivo imaging of cancers, tumor vasculature, and lymph nodes. Other aspects of the review are in vivo deep tissue imaging, multiphoton excitation, NIR fluorescence and SERS imaging, and toxic effects of NPs and their clearance from the body. Figure Semiconductor quantum dots and metal nanoparticles have extensive applications, e.g., in vitro and in vivo bioimaging Tamitake Itoh and Abdulaziz Anas contributed equally to this article.     

LOW DENSITY POLYETHYLENE/CLAY NANOCOMPOSITES MODIFIED BY ETHYLENE COPOLYMERS： EFFECTS OF FUNCTIONALIZED SEGMENTS ON MORPHOLOGY

Melt extrusion was used to prepare binary nanocomposites of ethylene copolymers and organoclay and trinary nanocomposites of low-density polyethylene （LDPE）, ethylene copolymer and organoclay. X-ray diffraction （XRD） and transmission electron microscopy （TEM） were used to analyze the structure of the clay phase and the morphology of the nanocomposites. Influences of the comonomer in the copolymer and the content of the copolymer on the morphology of the resulting nanocomposites were discussed. The binary and the trinary composites may form intercalated or exfoliated structures depending on the interaction between the copolymer and the clay layers and the content of the copolymer.     

Tautomeric and conformational isomerism of natural hydroxyanthraquinones

Natural 1,5-di-, 1,4,5-tri-, and 1,4,5,8-tetrahydroxyanthraquinones and their anions and metal complexes were shown to be equilibrium mixtures of tautomers and conformers using quantum-chemical and correlation analysis of elecronic absorption spectra. Solvent effects, ionization, complexation, and the introduction and substitution of substituents were accompanied by shifts of tautomeric and conformational equilibria that determine the color of the compounds. __________ Translated from Khimiya Prirodnykh Soedinenii, No. 3, pp. 224–229, May–June, 2006.     

Flash vacuum pyrolysis of azo and nitrosophenols: new routes towards hydroxyarylnitrenes and their reactions

Flash vacuum pyrolysis of phenylazonaphthols and nitrosonaphthols at 700°C and 0.02 Torr yielded quinoline, isoquinoline, indene and naphthols (and aniline only from the phenylazo derivatives). Similar FVP of p-nitroso and p-phenylazophenol gave pyridine. Also, FVP of phenanthraquinonemonophenylhydrazone and monooxime gave phenathridine and fluorenone. The formation of the heterocyclic system was assumed to involve nitrene and azatropone intermediates.     

Selecting polymers for medical devices based on thermal analytical methods

This biomaterials overview for selecting polymers for medical devices focuses on polymer materials, properties and performance. An improved understanding of thermoplastics and thermoset properties is accomplished by thermal analysis for device applications. The medical applications and requirements as well as the oxidative and mechanical stability of currently used polymers in devices are discussed. The tools used to aid the ranking of the thermoplastics and thermosets are differential scanning calorimetry (DSC), thermogravimetry (TG), thermal mechanical analysis (TMA) and dynamic mechanical analysis (DMA) as well as a number of key ASTM polymer tests. This paper will spotlight the thermal and mechanical characterization of the bio-compatible polymers e.g., olefins, nylon, polyacetals, polyvinyl chloride and polyesters.     

乙烷部分氧化制C2氧化物用Fe－Al－P－O催化剂的研究Ⅰ．超细Fe－Al－P－O催化剂的制备与表征

 用溶胶－凝胶法制备了超细Fe－Al－P－O催化剂，并用DTA－TG，BET，TEM，XRD，TPR和IR等技术研究了催化剂的微观组成和结构及其晶格氧活性，探讨了催化剂的制备工艺，考察了溶胶－凝胶的形成机理、凝胶干燥及焙烧条件对催化剂微观组成和结构的影响规律．结果表明，Fe－Al－P－O催化剂呈非晶态，是具有均匀分布的超细粒子（10nm），其比表面积大（238m2／g），晶格氧活性高．FePO4和AlPO4间隔分布在催化剂表面，形成Lewis碱位（P＝O，P－O－Fe）和Lewis酸位（Fe3＋，Al3＋）．     

Recent progress in MXene and graphene based nanocomposites for microwave absorption and electromagnetic interference shielding

There is widespread use of telecommunication and microwave technology in modern society, and raised the electromagnetic interference (EMI) issue to alarming situation due to apprehensive demand and growth of 5G technology undesirably disturbing the human health. The two dimensional (2D) materials including graphene and MXenes are already been used for variety of electronic devices due to their exceptional electrical, mechanical, optical, chemical, and thermal properties. MXene is composed of metal carbides, in which mainly metals are the building blocks for dielectrics, semiconductors, or semimetals. However, the strong interfaces with electromagnetic waves (EM) are variable from terahertz (THz) to gigahertz (GHz) frequency levels and are widely used in EMI and Microwave absorption (MA) for mobile networks and communication technologies. The use of different organic materials with metal, organic, inorganic fillers, polymers nanocomposite and MXene as a novel material has been studied to address the recent advancement and challenges in the microwave absorption mechanism of 2D materials and their nanocomposites. In this concern, various techniques and materials has been reported for the improvement of shielding effectiveness (SE), and theoretical aspects of EMI shielding performance, as well stability of 2D materials particularly MXene, graphene and its nanocomposites. Consequently, various materials including polymers, conducting polymers, and metal–organic frameworks (MOF) have also been discussed by introducing various strategies for improved MA and control of EMI shieling. Here in this comprehensive review, we summarized the recent developments on material synthesis and fabrication of MXene based nanocomposites for EMI shielding and MA. This research work is a comprehensive review majorly focuses on the fundamentals of EMI/MA.  The recent developments and challenges of the MXene and graphene based various structures with different polymeric composites are described in a broader perspective.     

二苯二硫和二苄二硫润滑性能的量子化学研究

The molecular geometries optimization and electronic structures of diphenyl disulfide (DPDS) and dibenzyl disulfide (DBDS) compounds were investigated by density functional theory (DFT) and ab initio method at the 6-31G basis set level. The active atoms and bonds of reaction were provided by frontier molecular orbital theory. The molecular orbital parameters of DPDS and DBDS compounds and iron atom cluster were calculated by using density functional theory. The interaction pattern between the organic disulfide compounds and iron atom cluster was discussed based on the approximate rule of orbital energy. Some parameters characterizing the action strength between the organic disulfide compounds and iron atom cluster, including the bonding strength, reactive strength and static action strength, were analyzed by using frontier electron density, super de-localizability, net atomic charge and the interaction energy of chemical adsorption as criteria. The results indicate that S-S chemical bond and C-S chemical bond of the compounds are inclined to be broken when DPDS and DBDS interact with the metal. The anti wear ability order of DPDS and DBDS compounds is DPDS>DBDS, and the extreme pressure ability order of DPDS and DBDS compounds is DBDS>DPDS, and the prediction results based on quantum chemistry calculations are in good accordance with the friction and wear test results.     

Simultaneous analysis of serotonin, melatonin, piceid and resveratrol in fruits using liquid chromatography tandem mass spectrometry

An analytical method was developed for the simultaneous quantification of serotonin, melatonin, trans- and cis-piceid, and trans- and cis-resveratrol using reversed-phase high performance liquid chromatography coupled to mass spectrometry (HPLC-MS) with electrospray ionization (ESI) in both positive and negative ionization modes. HPLC optimal analytical separation was achieved using a mixture of acetonitrile and water with 0.1% formic acid as the mobile phase in linear gradient elution. The mass spectrometry parameters were optimized for reliable quantification and the enhanced selectivity and sensitivity selected reaction monitoring mode (SRM) was applied. For extraction, the direct analysis of initial methanol extracts was compared with further ethyl acetate extraction. In order to demonstrate the applicability of this analytical method, serotonin, melatonin, trans- and cis-piceid, and trans- and cis-resveratrol from 24 kinds of commonly consumed fruits were quantified. The highest serotonin content was found in plantain, while orange bell peppers had the highest melatonin content. Grape samples possessed higher trans- and cis-piceid, and trans- and cis-resveratrol contents than the other fruits. The results indicate that the combination of HPLC-MS detection and simple sample preparation allows the rapid and accurate quantification of serotonin, melatonin, trans- and cis-piceid, and trans- and cis-resveratrol in fruits.     

Determination and study on residue and dissipation of benazolin-ethyl and quizalofop-p-ethyl in rape and soil

A QuEChERS (quick, easy, cheap, effective, rugged, and safe) method for the determination of benazolin-ethyl and quizalofop-p-ethyl in rape and soil by high-performance liquid chromatography-tandem mass spectrometry has been developed in this study. The residue and dissipation of benazolin-ethyl and quizalofop-p-ethyl in rape and soil were determined with the developed method. The half-lives of benazolin-ethyl in rape straw and soil were 3.7–5.1 days and 14.3–26.3 days, respectively. The half-lives of quizalofop-p-ethyl in rape straw and soil were 5.0-6.1 days and 0.3–9.7 days, respectively. The residue of benazolin-ethyl and quizalofop-p-ethyl in rapeseed and soil were below the detection limit (i.e., 0.5?mg?kg^?1, the maximum residue level of European Union for quizalofop-p-ethyl).     

Carbenes and Nitrenes: Recent Developments in Fundamental Chemistry

Carbenes and nitrenes can exist in both singlet and triplet states, sometimes equally stable and interconverting either thermally or photochemically. Many carbene and nitrene reactions proceed via tunneling at low temperatures. Numerous singlet and triplet states have been characterized spectroscopically, and a detailed understanding of the chemical and physical properties of carbenes and nitrenes is emerging. There has been significant progress in the direct observation of carbenes, nitrenes, and many other reactive intermediates in recent years through the application of matrix photolysis and flash vacuum pyrolysis linked with matrix isolation at cryogenic temperatures. Our understanding of singlet and triplet states has improved through the interplay of spectroscopy and computations. Bistable carbenes and nitrenes as well as many examples of tunneling have been discovered and numerous rearrangements and fragmentations have been documented. The correlation of the zero‐field splitting parameter D with calculated spin densities on nitrenes and carbenes is discussed. This Minireview gives an overview of some of these developments.     

Two-dimensional Metal-Organic Frameworks and Derivatives for Electrocatalysis

The most important topics in the world today are environmental and resource issues. The development of green and clean energy is still one of the great challenges of social sustainable development. Two-dimensional(2D) metal-organic frameworks(MOFs) and derivatives have exceptional potential as high-efficiency electrocatalysts for clean energy technologies. This review summarizes various synthesis strategies and applications of 2D MOFs and derivatives in electrocatalysis. Firstly, we will outline the advantages and uniqueness of 2D MOFs and derivatives, as well as their applicable areas. Secondly, the synthetic strategies of 2D MOFs and derivatives are briefly classified. Each category is summarized and we list classic representative fabrication methods, including specific fabrication methods and mechanisms, corresponding structural characteristics, and insights into the advantages and limitations of the synthesis method. Thirdly, we separately classify and summarize the application of 2D MOFs and derivatives in electrocatalysis, including electrocatalytic water splitting, oxygen reduction reaction(ORR), CO₂ reduction reaction(CO₂RR), and other electrocatalytic applications. Finally, the development prospects and existing challenges to 2D MOFs and derivatives are discussed.     

Advancing cellulose-based nanotechnology

Nanotechnology has applications across most economic sectors and allows the development of new enabling science with broad commercial potential. Cellulose and lignocellulose have great potential as nanomaterials because they are abundant, renewable, have a nanofibrillar structure, can be made multifunctional, and self-assemble into well-defined architectures. To exploit their potential, R&D investments must be made in the science and engineering that will fully determine the properties and characteristics of cellulose and lignocellulose at the nanoscale, develop the technologies to manipulate self-assembly and multifunctionallity, and develop these new technologies to the point where industry can produce advanced and cost-competitive cellulose and lignocellulose-based products. Because many of the findings on nanostructues and nanoprocesses are not yet fully measurable, replicable, or understood, it will take substantial R&D investments. To most effectively and efficiently move forward, increased cooperation must occur among the cellulose/lignocellulose R&D community, the federal departments and agencies having interests and ongoing programs in nanotechnology, and industry. Cooperation is critical to capturing synergies, enhancing accomplishments, and avoiding unwarranted duplication of facilities and efforts.     

In situ studies of oxide nucleation,growth, and transformation using slow electrons

Surface processes such as metal oxidation and metal oxide growth invariably influence the physical and chemical properties of materials and determine their interaction with their surroundings and hence their functionality in many technical applications. On a fundamental level, these processes are found to be governed by a complex interplay of thermodynamic variables and kinetic constraints, resulting in a rich variety of material-specific phenomena. In this review article, we discuss recent results and insights on transition metal oxidation and rare-earth oxide growth acquired by low-energy electron microscopy and related techniques. We demonstrate that the use of in situ surface sensitive methods is a prerequisite to gaining a deeper understanding of the underlying concepts and the mechanisms responsible for the emerging oxide structure and morphology. Furthermore, examples will be provided on how structural and chemical modifications of the oxide films and nanostructures can be followed in real-time and analyzed in terms of local reactivity and cooperative effects relevant for heterogeneous model catalysis.     

SYNTHESIS, CHARACTERIZATION, THERMAL DEGRADATION AND ELECTROCHEMICAL PROPERTIES OF OLIGO-4-m-TOLYLAZOMETHINEPHENOL

The oxidative polycondensation reaction conditions of 4-m-tolylazomethinephenol （4-TAMP） in the presence of air O2 and NaOCl as oxidants were studied in an aqueous alkaline medium between 50 and 90℃. The structures of the obtained monomer and oligomer were confirmed by FT-IR, UV-Vis, ^1H- and ^13C-NMR and elemental analysis techniques. The physical characterization was made by TG-DTA, size exclusion chromatography （SEC） and solubility tests. At the optimum reaction conditions, the yield of oligo-4-m-tolylazomethinephenol （O-4-TAMP） was found to be 62.50% （for air O2 oxidant） and 90.0% （for NaOCl oxidant）, respectively. According to the SEC analysis, the number-average molecular weight （Mn）, weight-average molecular weight （Mw） and polydispersity index （PDI） values of O-4-TAMP were found to be 2310, 2610 g tool 1 and 1. 13, respectively, using air O2, and 1390, 1710 g mol^-1 and 1.23, using NaOCl, respectively. According to TG-DTA analyses, O-4-TAMP was more stable than 4-TAMP against thermal decomposition. The weight losses of 4-TAMP and O-4-TAMP were found to be 68% and 58% at 1000℃. Electrical conductivity of the O-4-TAMP was measured, showing that the polymer is a typical semiconductor. Electrochemically, the highest occupied molecular orbital （HOMO）, the lowest unoccupied molecular orbital （LUMO） and electrochemical energy gaps （E＇g） for 4-TAMP are -5.96, -3.22 and 2.74 eV, respectively. The HOMO, LUMO and （E＇g） for O-4-TAMP are -5.78, -3.44 and 2.34 eV, respectively. According to UV-Vis measurements, optical band gaps （Eg） of 4-TAMP and O-4-TAMP were found to be 3.45 and 3. 1 0 eV, respectively.