Effect of deuterium on phase transformations in fullerenes at high temperatures and high pressures

The effect deuterium has on phase transformations is studied for amorphous and crystalline fullerenes C₆₀ and C₇₀ at high temperatures of up to 1300°C and high pressures (2–8 GPa). Amorphous fullerene phases are obtained via long grinding in a planetary mill. Structure is studied by means of neutron diffraction. In all cases, amorphous graphite (nanographite) forms in the temperature range of 800–1100°C. This material has different diffraction spectra distinguished by the heights of the halos observed on the graphite diffraction maxima and their relative intensities. These spectra (the structure of nanographite) are affected by preliminary amorphization, the number of carbon atoms in the fullerenes (C60 or C70), and the introduction of deuterium atoms. The different spectra of amorphous (disordered) graphite testify to its varying structure.     

Thermally stimulated desorption of C<Subscript>60</Subscript> and C<Subscript>70</Subscript> fullerenes from rigid-chain polyimide films

Polyimide-fullerene composite thin coatings are investigated using thermal desorption mass spectrometry in the temperature range 20–800°C. It is found that, at temperatures below the temperature of decom-position of the polymer matrix, thermally stimulated desorption of fullerene molecules is limited by the diffusion of fullerene molecules in the matrix. The diffusion coefficients and activation energies of diffusion of C₆₀ and C₇₀ fullerene molecules are determined from the experimental data on thermally stimulated desorption in the framework of several approaches. It is revealed that the diffusion of C₇₀ molecules in the polyimide matrix is more hindered than the diffusion of C₆₀ molecules in the same matrix.     

Impact of a physiological medium on the aggregation state of C<Subscript>60</Subscript> and C<Subscript>70</Subscript> fullerenes

The C₆₀ and C₇₀ fullerene-cluster size distribution in aqueous solutions and a physiological medium is studied via dynamic light scattering. The initial aqueous solutions of fullerenes obtained via different methods are found to contain clusters with a characteristic size of about 100 nm. The additional aggregation of fullerenes is observed after their transfer into a physiological medium (0.9% NaCl) and is established to depend on the preparation method. The cluster-size distribution in a fullerene–pectic-acid mixture is found to vary in water and a physiological medium. The results reveal the need for additional studies of the structure and properties of C₆₀ and C₇₀ molecules, as well as their complexes with medicines, in a physiological medium for medical applications.     

Vibrational spectra of 2-cyclooctylamino-5-nitropyridine and its mixtures with C<Subscript>60</Subscript> and C<Subscript>70</Subscript> fullerenes

The vibrational spectra of 2-cyclooctylamino-5-nitropyridine (COANP) solutions and the evolution of the spectra upon changing over from the solutions to solid-phase COANP are investigated. The bands observed in the spectra are assigned to the corresponding vibrational modes. The nature of the interaction of COANP with C₆₀ and C₇₀ fullerenes is elucidated by analyzing the transmission spectra of these compounds. No interaction of the COANP compound with C₆₀ and C₇₀ fullerenes is revealed under the studied conditions. It is assumed that the physical nature of this phenomenon can be associated with the formation of liquid-crystal clusters consisting of fullerene molecules.     

The oxidation of fullerenes (C<Subscript>60</Subscript>, C<Subscript>70</Subscript>) with various oxidants under ultrasonication

The reaction of C₆₀, under ultrasonication, with various oxidants, such as 3-chloroperoxy benzoic acid (Fluka 99%), 4-methyl morpholine N-oxide (Aldrich 97%), chromium (VI) oxide (Aldrich 99.9%), and the oxone® monopersulfate compound, causes the oxidation of fullerenes at room temperature. The FAB-MS spectra and HPLC profile confirmed that the products of fullerene oxidation were [C₆₀(O)_n] (n=1～3 or n=1). C₇₀ also reacted, under ultrasonication, with various oxidants, but the reaction rate of C₇₀ was lower than that of C₆₀.     

Stability of C<Subscript>20</Subscript> fullerene chains

The stability of (C₂₀)_N metastable chains, where C₂₀ fullerenes are joined by tight covalent bonds, is analyzed by numerical simulation using a tight-binding potential. Various channels of losing the chain-cluster structure of the (C₂₀)_N complexes have been determined including the decay of the C₂₀ clusters, their coalescence, and the separation of one C₂₀ fullerene from a chain. The lifetimes of the (C₂₀)_N chains with N = 3–7 for T = 2000–3500 K are directly calculated by the molecular dynamics method. It has been shown that, although the stability of the chains decreases with an increase in N, it remains sufficiently high even for N ? 1. An interesting lateral result is the observation of new (C₂₀)_N isomers with the combination of various intercluster bonds with the maximum binding energy of fullerenes in the chain.     

Effect of heating of the electronic subsystem on the thermal stability of the C<Subscript>60</Subscript> and C<Subscript>20</Subscript> fullerenes and (C<Subscript>20</Subscript>)<Subscript>2</Subscript> cluster molecule

The effect of heating of the electronic subsystem on the thermal stability of C₆₀ and C₂₀ fullerenes and a (C₂₀)₂ cluster molecule is investigated theoretically. It is demonstrated that the excitation of electrons to upper energy levels in accordance with the Fermi-Dirac distribution function does not lead to a substantial change in the activation energy E _a for decay of the C₂₀ fullerene. The stability of the C₆₀ fullerene and the (C₂₀)₂ cluster molecule likewise does not change radically. However, the inclusion of corrections associated with the finite sizes of the heat bath leads to the activation energy E _a which is in better agreement with the calculated height of the potential barrier preventing the cluster decay.     

Equilibrium state of C<Subscript>60</Subscript>, C<Subscript>70</Subscript>, and C<Subscript>72</Subscript> nanoclusters and local defects of the molecular skeleton

The stability of C₆₀ and C₇₀ fullerenes and C₆₀ and C₇₂ nanotubes devoid of 2–12 atoms of the cluster skeleton was theoretically studied. It was established that C_n molecules with an even number of atoms remain stable, which was confirmed by experimental studies of monomolecular decay of clusters with the number of atoms n≥30. The change in the internuclear distances and in the ionization potential of nanoclusters was determined depending on the number of eliminated atoms. Such defects were shown to decrease the ionization potential of nanoclusters by 0.5–0.8 eV. The electron spectrum was calculated within the Harrison semiempirical tight-binding model in the Goodwin modification. A new parametrization of interatomic matrix elements of the Hamiltonian and atomic terms for carbon nanoclusters was suggested.     

Effect of bismuth nanolayers on the oriented growth of fullerene C<Subscript>60</Subscript> on an amorphous substrate

The effect of a bismuth sublayer with an effective thickness of 0.5 to 4 nm on the structure of C₆₀ fullerene films grown on amorphous substrates (silicon covered with a natural oxide layer; glass) using the quasi-closed-volume method is studied. An x-ray diffraction study of fullerene films showed that the intensity ratio between the (220) and (111) peaks depends nonmonotonically on the sublayer thickness. In the bismuth sublayer thickness range 0.5–2.0 nm, fullerene films are found to exhibit a growth texture with the 〈110〉 axis; the average crystallite size was ～20 µm. The quality of the texture can be improved by varying the fullerene growth temperature.     

C<Subscript>60</Subscript> fullerene decoration of carbon nanotubes

A new fully carbon nanocomposite material is synthesized by the immersion of carbon nanotubes in a fullerene solution in carbon disulfide. The presence of a dense layer of fullerene molecules on the outer nanotube surface is demonstrated by TEM and XPS. Fullerenes are redistributed on the nanotube surface during a long-term action of an electron beam, which points to the existence of a molecular bond between a nanotube and fullerenes. Theoretical calculations show that the formation of a fullerene shell begins with the attachment of one C₆₀ molecule to a defect on the nanotube surface.     

New property of the fullerenes: the anomalously effective quenching of electronically excited states owing to energy transfer to the C<Subscript>70</Subscript> and C<Subscript>60</Subscript> molecules

The quenching of the electronically excited states of various energy donors—Tb³⁺; 9,10-anthracene dibromide; and adamantanone—by C₇₀ fullerene has been detected and analyzed. The quenching is characterized by anomalously high biomolecular quenching rate constants, which are obtained from the Stern-Volmer dependences of the energy-donor photoluminescence intensity on the concentration of the C₇₀ molecules. It has been shown that the high efficiency of quenching by the C₇₀ fullerene as compared to the C₆₀ fullerene is due to the higher polarizability of the C₇₀ molecule and large overlap integrals of the energy-donor photoluminescence spectra with the absorption spectrum of the C₇₀ fullerene.     

Calculation of the structure of carbon clusters based on fullerene-like C<Subscript>24</Subscript> and C<Subscript>48</Subscript> molecules

Equilibrium structures obtained by linking with valence bonds the carbon carcasses of two fullerene-like molecules have been studied by molecular dynamics simulation. In free fullerene, carbon atoms form sp² hybridized bonds, but at places of links between fullerenes, sp³ hybridized bonds are formed, which determines the changes in the properties of such structures. In the literature, the topology of diamond-like phases is described, but equilibrium clusters based on fullerene-like molecules are underexplored. The right angles between the C–C bonds are energetically unfavorable, and the reduction in the energy of clusters in the process of relaxation is connected with the optimization of valence angles, which leads to a reduction in the symmetry of clusters and, in a number of cases, even to disruption of some valence bonds. It is shown that different fashions of linking two fullerenes result in the formation of clusters with different structures and energies. Different initial conditions can lead to different configurations of clusters with the same topology. Among the analyzed clusters, a structure with the minimum potential energy per atom was found. The results of this work contribute to the study of the real structure of carbon clusters.     

Structure and stability of two-dimensional systems of C<Subscript>20</Subscript> fullerenes

Two-dimensional systems of C₂₀ fullerenes connected to each other by strong covalent bonds have been investigated. Several isomers differing in the type of intercluster bonds have been revealed. The lifetimes τ of the (C₂₀) _{M × M} complexes with M = 2 and 3 at T = 1800–3300 K have been directly calculated using the molecular dynamics method. It has been shown that these complexes lose their periodic cluster structure due usually to the coalescence of two or several neighboring C₂₀ fullerenes. The activation energy of this process determined by analyzing the τ(T) dependence appears to be E _a ≈ 2.5 eV in agreement with the calculations of the heights of the potential barriers preventing the coalescence. At high temperatures T > 2400 K, the decay of C₂₀ fullerenes entering into the complex is possible.     

Translocation mechanism of C<Subscript>60</Subscript> and C<Subscript>60</Subscript> derivations across a cell membrane

Carbon-based nanoparticles (NPs) such as fullerenes and nanotubes have been extensively studied for drug delivery in recent years. The permeation process of fullerene and its derivative molecules through membrane is essential to the utilization of fullerene-based drug delivery system, but the mechanism and the dynamics of permeation through cell membrane are still unclear. In this study, coarse-grained molecular dynamics simulations were performed to investigate the permeation process of functionalized fullerene molecules (ca. 0.72 nm) through the membrane. Our results show that single functionalized fullerene molecule in such nanoscale could permeate the lipid membrane in micro-second time scale. Pristine C₆₀ molecules prefer to aggregate into several small clusters while C₆₀OH₁₅ molecules could aggregate into one big cluster to permeate through the lipid membrane. After permeation of C₆₀ or its derivatives into membrane, all C₆₀ and C₆₀OH₁₅ molecules disaggregated and monodispersed in the lipid membrane.

Open image in new window

Graphical abstract ?

     

Phase transitions in the CN<Subscript>x</Subscript>-TiN system attendant on the variation of the bias voltage during ion-stimulated growth

The structure of amorphous CN_x-TiN films grown by ion-stimulated deposition at a bias voltage U = 200–500 V is studied by X-ray diffraction. As the bias voltage increases in the range U = 300–360 V, the CN_x-TiN films are shown to undergo a phase transition in the amorphous phase having different order scales (20–50 Å): this transition is related to an increase in the content of the fraction of medium-cell (4 Å) carbon clusters as compared to the fractions of clusters with large (8 Å) and small (2 Å) cells. Under these conditions, 80–150 Å crystalline clusters undergo the phase transition from the Ti₂C(N) carbide into graphite (C _g) and diamond (C_d); the last two phases are represented by 100-Å clusters.     

Temperature dependent surface and spectral modifications of nano V<Subscript>2</Subscript>O<Subscript>5</Subscript> films

Nanocrystalline V₂O₅ films have been deposited on glass substrates at 300°C substrate temperature using thermal evaporation technique and were subjected to thermal annealing at different temperatures 350, 400, and 550°C. X-ray diffraction (XRD) spectra exhibit sharper and broader characteristic peaks respectively indicating the rearrangement of nanocrystallite phases with annealing temperatures. Other phases of vanadium oxides started emerging with the rise in annealing temperature and the sample converted completely to VO₂ (B) phase at 550°C annealing. FESEM images showed an increase in crystallite size with 350 and 400°C annealing temperatures followed by a decrease in crystallite size for the sample annealed at 550°C. Transmission spectra showed an initial redshift of the fundamental band edge with 350 and 400°C while a blue shift for the sample annealed at 550°C, which was in agreement with XRD and SEM results. The films exhibited smart window properties as well as nanorod growth at specific annealing temperatures. Apart from showing the PL and defect related peaks, PL studies also supported the observations made in the transmission spectra.     

Processing of C<Subscript>60</Subscript> thin films by Matrix-Assisted Pulsed Laser Evaporation (MAPLE)

Thin films of fullerenes (C₆₀) were deposited onto silicon using matrix-assisted pulsed laser evaporation (MAPLE). The deposition was carried out from a frozen homogeneous dilute solution of C₆₀ in anisole (0.67 wt%), and over a broad range of laser fluences, from 0.15 J/cm² up to 3.9 J/cm². MAPLE has been applied for deposition of fullerenes for the first time and we have studied the growth of thin films of solid C₆₀. The fragmentation of C₆₀ fullerene molecules induced by ns ablation in vacuum of a frozen anisole target with C₆₀ was investigated by matrix-assisted laser desorption/ionization (MALDI). Our findings show that intact fullerene films can be produced with laser fluences ranging from 0.15 J/cm² up to 1.5 J/cm².