Phase Transitions in a Mixture of Amorphous C<Subscript>60</Subscript> and C<Subscript>70</Subscript> Fullerene Phases at High Temperatures and Pressures

Phase transitions in two types of amorphous fullerene phases (C₆₀–C₇₀ (50/50) mixtures and an amorpous C₇₀ fullerene phase) are studied via neutron diffraction at pressures of 2–8 GPa and temperatures of 200–1100°C. Fullerenes are amorphized by grinding in a ball mill and sintered under quasi-hydrostatic pressure in a toroidal-type chamber. Diffraction studies are performed ex situ. It is shown that the amorphous phase of fullerenes retains its structure at temperatures of 200–500°C, and amorphous graphite is formed at 800–1100°C with a subsequent transition to crystalline graphite. This process is slow in a mixture of fullerenes, compared to C₇₀ fullerene. According to neutron diffraction data, the amorphous graphite formed from amorphous fullerene phases has anisotropy that is much weaker in a fullerene mixture.     

Neutron diffraction study of the interaction of iron with amorphous fullerite

The amorphous fullerite C₆₀ has been prepared by mechanical activation (grinding in a ball mill), and its interaction with iron during sintering of powders with 0–95 at % Fe has been studied. After sintering in the range 800–1200°C under a pressure of 70 MPa, the samples have nonequilibrium structures different from the structures of both annealed and quenched steels. In this case, the carbon phase, i.e., amorphous fullerite, undergoes a polyamorphous transition to amorphous graphite. It has also been shown that the interaction of amorphous fullerite with iron is weaker compared to crystalline fullerite or crystalline graphite.     

Deposition of fullerene films from the ablation plasma generated by high-power ion beams on graphite targets

A possibility of deposing carbon films with a high content of C₆₀ and C₇₀ fullerenes from an ablation plasma generated as a result of irradiation of graphite targets by pulsed high-power ion beams is shown. The relative contents of the crystalline diamond-like carbon phase, crystalline fullerene phase, and amorphous carbon phase have been determined by X-ray diffraction analysis for different deposition conditions. The nanohardness and Young’s modulus of the deposited films and their adhesion to the single-crystal silicon substrate have been measured.     

Adsorption of helium on isolated C60 and C70 anions

Adsorption of helium on free, negatively charged fullerenes is studied in this work. Helium nanodroplets have been doped with fullerenes and ionised by electron attachment. For suitable experimental conditions, C^?₆₀ and C^?₇₀ anions are found to be complexed with a large number of helium atoms. Prominent anomalies in the ion abundances indicate the high stability of the commensurate 1×1 phase in which all hollow adsorption sites are occupied by one atom each. The adsorption energy for an additional helium atom is about 40% less than for atoms in the commensurate layer, similar to our previous findings for fullerene cations and in agreement with theoretical dissociation energies. Similarly, an anomaly in the adsorption energy occurs when 60 helium atoms are attached to C^?₆₀ or 65 to C^?₇₀. For C₆₀, the anomaly coincides with the one observed for cationic complexes but for C₇₀ it does not. Implications of these features are discussed in light of several theoretical studies of neutral and positively charged helium–fullerene complexes.     

Functionalization of pentagon–pentagon edges of fullerenes by cyclic polysulfides: A DFT study

We have performed a computational study to investigate the cyclosulfurization of the pentagon–pentagon (p–p) junctions in the non-IPR fullerenes C₆₀(D₃) and C₇₀(C_2v), and also Stone-Wales defective C₆₀ fullerene. Our results indicate the exothermic character of cyclosulfurization processes which can be related to the increase of pyramidalization angle (spherical excesses) and p characters of natural hybrid orbitals of C atoms at the p–p junctions. In fact these lead to the structural strain relief and stability of the cyclosulfurization derivatives of the non-IPR fullerenes. Moreover, the cyclosulfurization reaction of p–p bonds on the C₇₀(C_2v) is more energetically favorable than that of C₆₀(D₃), due to the higher curvature of carbon sites and the larger values of the p characters of natural hybrid orbitals in the C₇₀(C_2v). On the other hand, localization of the excess electrons on the C atoms at the p–p junctions leads to the low tendency of the charged non-IPR fullerenes to cyclosulfurization process. The desulfurization pathway of the exohedral derivatives of C₇₀(C_2v) indicates that it is energetically unfavorable for the functionalized fullerenes to break into individual fullerene and sulfur molecules. HOMO–LUMO gaps almost are independent of the number of pentathiepin rings while sensitive to the type of parent fullerene.     

Self-assembly of C60 fullerenes on quasi-one-dimensional Si(111)4 × 1-In surface

Using scanning tunneling microscopy observations, self-assembly of C₆₀ fullerenes in the course of room-temperature adsorption onto Si(111)4 × 1-In reconstruction and after subsequent annealing at temperatures ranging from 150 to 450 °C has been studied. Adsorbed C₆₀ fullerenes have been found to occupy off-centered positions on In-atom rows forming linear chains with a maximal length of eight C₆₀ molecules. Intermolecular spacing within the regular chains equals three lattice constants of Si(111) surface. Two energetically different adsorption states of C₆₀ have been detected, one of which is occupied preferentially at room temperature, while occupation of the second (more tight) state dominates at temperature above ~ 150 °C. In the first state, C₆₀ fullerene resides plausibly in a continuous rotation, while in the second state a C₆₀ molecule is fixed tightly in a single orientation with a C₆₀ hexagon pointing upward. Transition of C₆₀ fullerenes to the more stable state is accompanied by expelling In atoms from the Si(111)4 × 1-In reconstruction.     

Vibrational spectra of lanthanide endofullerenes with different symmetries of molecular structure

Quantum-chemical calculations of the geometric structure and vibrational spectra of lanthanide endofullerenes have been carried out. The vibrational frequencies of lanthanide atoms depend substantially on the symmetry of the molecular structure of the endofullerene and on the distance between the metal atom and the carbon cage. The infrared spectra of the endofullerenes M@C₆₀ contain vibrations that are forbidden by symmetry for the empty fullerene C₆₀. A change in the vibrational spectra due to the encapsulation of a metal atom in fullerenes with a C₆₀ cage is considerably more pronounced than that of the higher fullerenes. In the vibrational spectra, there are lines not characteristic of C₆₀, which indicates the presence of M@C₆₀ endofullerenes in a mixture with C₆₀ fullerenes.     

Adsorption states of protium and deuterium in redeposited polymer hydrocarbon films from a T-10 tokamak

Free redeposited hydrocarbon films (flakes) with a high content of deuterium and hydrogen formed in the T-10 tokamak operating at the Russian Research Centre (RRC) “Kurchatov Institute” are studied using thermal desorption spectroscopy (TDS), infrared (IR) spectroscopy, and X-ray diffraction (XRD) analysis. According to the XRD data, the films contain scattering elements with dimensions of about 1 nm and weakly ordered structures. The TDS curves for D₂ (H₂) consisting of two groups of peaks at 450–800 and 900–1000 K turn out to be sufficiently similar to the spectra of nanographite obtained by milling graphite mechanically. Two main adsorption states with activation energies of ≈0.65 and ≈1.25 eV/N corresponding to hopping diffusion and resonance mechanisms, respectively, were discovered. The difference between the IR spectra of reddish-gold and dark-brown films is due to both a weaker degree of C-H hybridization of dark films and their disordered carbon network whose ends are connected to CD_2,3 fragments.     

A comparative study of ion-induced damages in C60 and C70 fullerenes

The stability of fullerenes (C₆₀ and C₇₀) under swift heavy ion irradiation is investigated. C₆₀ and C₇₀ thin films were irradiated with 120 MeV Ag ions at fluences from 1×10¹² to 3×10¹³ ions/cm². The damage cross-section and radius of damaged cylindrical zone were found to be higher for C₆₀ than C₇₀ as evaluated by Raman spectroscopy, which shows that the C₇₀ molecule is more stable under energetic ion impact. The higher damage cross-section of the C₆₀ molecule compared with that of the C₇₀ molecule is explained on the basis of thermal conductivity in the framework of the thermal spike model. The surface morphology of pristine C₆₀ and C₇₀ films is studied by atomic force microscopy. UV-visible absorption studies revealed that band gap for C₆₀ and C₇₀ fullerenes thin films decreases with increasing ion fluence. Resistivity of C₆₀ and C₇₀ thin films decreases with increasing ion fluence but the decrease is faster for C₆₀ than C₇₀, indicating higher damage in C₆₀. Irradiation at a fluence of 3×10¹³ ions/cm² results in complete damage of fullerenes (C₆₀ and C₇₀) into amorphous carbon.     

Phase transformations in amorphous fullerite C60 under high pressure and high temperature

First phase transformations of amorphous fullerite C₆₀ at high temperatures (up to 1800 K) and high pressures (up to 8 GPa) have been investigated and compared with the previous studies on the crystalline fullerite. The study was conducted using neutron diffraction and Raman spectroscopy. The amorphous fullerite was obtained by ball-milling. We have shown that under thermobaric treatment no crystallization of amorphous fullerite into С₆₀ molecular modification is observed, and it transforms into amorphous-like or crystalline graphite. A kinetic diagram of phase transformation of amorphous fullerite in temperature–pressure coordinates was constructed for the first time. Unlike in crystalline fullerite, no crystalline polymerized phases were formed under thermobaric treatment on amorphous fullerite. We found that amorphous fullerite turned out to be less resistant to thermobaric treatment, and amorphous-like or crystalline graphite were formed at lower temperatures than in crystalline fullerite.     

激光照射下富勒烯稳定性的研究

本文研究了富勒烯固体在较弱激光照射下随时间变化的拉曼光谱。结果表明 ,富勒烯固体在激光照射下随时间发生裂解形成石墨和无定形碳 ,同时发生了 C6 0 的光致聚合效应。     

Vibrational spectra of 2-cyclooctylamino-5-nitropyridine and its mixtures with C<Subscript>60</Subscript> and C<Subscript>70</Subscript> fullerenes

The vibrational spectra of 2-cyclooctylamino-5-nitropyridine (COANP) solutions and the evolution of the spectra upon changing over from the solutions to solid-phase COANP are investigated. The bands observed in the spectra are assigned to the corresponding vibrational modes. The nature of the interaction of COANP with C₆₀ and C₇₀ fullerenes is elucidated by analyzing the transmission spectra of these compounds. No interaction of the COANP compound with C₆₀ and C₇₀ fullerenes is revealed under the studied conditions. It is assumed that the physical nature of this phenomenon can be associated with the formation of liquid-crystal clusters consisting of fullerene molecules.     

激光照射下富烯稳定性的研究

本文研究了富勒烯固体在弱激光照射下随时间变化的拉曼光谱。结果表明，富勒烯固体在激光照射下随时间发生裂解形成石墨和无定形碳，同时发生了Ｃ６０的光致聚合效应。     

Structure of the amorphous phase of pyrolisates of lanthanum diphthalocyanine according to X-ray scattering data

Data on X-ray diffraction in lanthanum diphthalocyanine pyrolysates synthesized at temperatures of 800–1800°С demonstrate the formation of an amorphous carbon phase with embedded lanthanum atoms. Low-temperature pyrolysis (800–900°С) creates layered carbon structures. Due to annealing at 1000°С, carbon integrates into globules whose number of atoms is m ~ 100. Such structures with gyration radii of R _g ~ 0.4–0.5 nm on the order of the precursor molecule size are synthesized in the temperature range of 1000–1800°С, and are stable in terms of size and mass. In this case, their density approaches that of graphite.     

A high pressure,high temperature study of 1,1-diamino-2,2-dinitro ethylene

We report a synchrotron energy-dispersive X-ray diffraction study of the novel high explosive 1,1-diamino-2,2-dinitroethylene at high pressures and high temperatures. Pressure was generated using a Paris–Edinburgh cell to employ larger sample volumes. High temperatures were created using a resistive graphite cylinder surrounding the sample. The PT phase diagram was explored in the 3.3 GPa pressure range and in the ～ 400°C temperature range. We believe that the sample commenced in the α-phase and then ended up in an amorphous phase when the temperature increased beyond 280°C near 2 GPa, which we believe to be the γ-phase. Further pressure and temperature cycling suggests that the sample transformed reversibly into and out of the amorphous phase near the phase line.     

Study of the electronic structure and properties of 13C-isotope-based composites

The morphology and electronic structure of ¹³C-isotope-based graphite composites were studied by transmission electron microscopy (TEM), x-ray diffraction, and x-ray fluorescence spectroscopy. High-resolution TEM images showed that composites contain several forms of carbon particles. According to an x-ray diffraction analysis, the size of graphene stacks of graphite particles is 20 and 40 Å. The CK _α x-ray fluorescence spectra of the initial ¹³C isotope powder and composites based on it detected an increase in the density of high-energy occupied states in comparison with the graphite spectrum. Ab initio quantum chemical calculation of the structure of C₁₅₀ graphene showed that the increase in the density of states stems from the electrons of dangling bonds of boundary carbon atoms of particles ～20 Å in size. Electrical properties of ¹³C-isotope-based samples were studied by analyzing the temperature dependence of the conductivity. It was assumed that the change in the logarithmic dependence of the conductivity observed at liquid-helium temperatures to the linear dependence as the temperature increases is caused by carrier transfers between the disordered graphene layers forming a nanocomposite.     

Phase transitions in the CN<Subscript>x</Subscript>-TiN system attendant on the variation of the bias voltage during ion-stimulated growth

The structure of amorphous CN_x-TiN films grown by ion-stimulated deposition at a bias voltage U = 200–500 V is studied by X-ray diffraction. As the bias voltage increases in the range U = 300–360 V, the CN_x-TiN films are shown to undergo a phase transition in the amorphous phase having different order scales (20–50 Å): this transition is related to an increase in the content of the fraction of medium-cell (4 Å) carbon clusters as compared to the fractions of clusters with large (8 Å) and small (2 Å) cells. Under these conditions, 80–150 Å crystalline clusters undergo the phase transition from the Ti₂C(N) carbide into graphite (C _g) and diamond (C_d); the last two phases are represented by 100-Å clusters.     

Modulation of the work function of fullerenes C60 and C70 by alkali-metal adsorption: A theoretical study

The impact of alkali-metal (Li/Na/Cs) adsorption on work function of fullerenes C₆₀ and C₇₀ was investigated by first-principles calculations. After adsorption, the work functions of fullerenes C₆₀ and C₇₀ decrease distinctly and vary linearly with the electronegativity of the alkali metal elements, and the positions where the alkali atoms are adsorbed considerably influence the work functions. On the contrary, a vacancy defect elevates the work functions of the fullerenes C₆₀ and C₇₀. The variation in the work functions rests with variation in Fermi level (which are attributed to charge transfer) and variation in vacuum levels (which are attributed to the induced dipole moments). Moreover, alkali-metal adsorption can also improve the electric conductivity of a fullerene mixture of C₆₀ and C₇₀.     

Impact of a physiological medium on the aggregation state of C<Subscript>60</Subscript> and C<Subscript>70</Subscript> fullerenes

The C₆₀ and C₇₀ fullerene-cluster size distribution in aqueous solutions and a physiological medium is studied via dynamic light scattering. The initial aqueous solutions of fullerenes obtained via different methods are found to contain clusters with a characteristic size of about 100 nm. The additional aggregation of fullerenes is observed after their transfer into a physiological medium (0.9% NaCl) and is established to depend on the preparation method. The cluster-size distribution in a fullerene–pectic-acid mixture is found to vary in water and a physiological medium. The results reveal the need for additional studies of the structure and properties of C₆₀ and C₇₀ molecules, as well as their complexes with medicines, in a physiological medium for medical applications.     

Ultraviolet Photoelectron Spectroscopy of Fullerenes C60 and C70:A Model Study

Geometrical optimizations of two fullerenes, C₆₀ and C₇₀, have been performed by means of density-functional theory techniques. Based on the Gelius model, ultraviolet photoelectron spectra (UPS) of C₆₀ and C₇₀ have been simulated. We have shown how the different local arrangements of carbon atoms of C₇₀ are responsible for the spectra. Our calculated spectra are in good agreement with the experimental counterparts.