径向复合圆柱压电超声换能器

提出一种三元径向复合圆柱压电超声换能器,并对其径向振动特性进行了研究。基于弹性力学理论及机电类比原理,导出了柱坐标系中分割处理径向极化压电陶瓷管准厚度模振动及薄壁短圆管径向振动的机电等效电路;利用径向力和振速连续的边界条件,得出了径向复合圆柱压电换能器系统的径向振动机电等效电路及其共振频率方程。探讨了换能器径向共振频率及有效机电耦合系数随其几何尺寸的变化关系。研究表明,换能器的径向共振频率及有效机电耦合系数随其内芯半径和预应力管壁厚度增大而降低。研制了一些径向复合圆柱压电换能器,并对其径向共振频率进行了测试。结果表明,理论与实验结果基本一致。      

夹心式径向复合压电超声换能器

对夹心式径向复合压电换能器径向振动特性进行了研究。该换能器由弹性内芯、预应力金属管及柱面压电陶瓷晶堆径向复合而成.利用机电类比法,得到了换能器的径向振动等效电路及频率方程。探讨了换能器第1、2阶径向共振频率及有效机电耦合系数与其几何尺寸的关系。研究表明,换能器第1阶径向共振频率随其内芯内径及预应力管壁厚度增大而降低;第2阶共振频率随内芯内径增大存在极小值,但随预应力管壁厚度增大单调下降。此外,采用第2阶径向共振模式能获得较高的有效机电耦合系数,并且压电陶瓷处于位移节线时,换能器有效机电耦合系数达极大值。对换能器共振频率的测试与有限元仿真表明。理论与实验及仿真结果符合较好。      

Theoretical analysis and experimental validation of radial cascaded composite ultrasonic transducer

A radial cascaded composite ultrasonic transducer is analyzed.The transducer consists of three short metal tubes and two radially polarized piezoelectric ceramic short tubes arranged alternately along the radial direction.The short metal tubes and the piezoelectric ceramic short tubes are connected in parallel electrically and in series mechanically,which can multiply the input sound power and sound intensity.Based on the theory of plane stress,the electro-mechanical equivalent circuit of radial vibration of the transducer is derived firstly.The resonance/anti-resonance frequency equation and the expression of the effective electromechanical coupling coefficient are obtained.Excellent electromechanical characteristics are determined by changing the radial geometric dimensions.Two prototypes of the transducers are designed and manufactured to support the analytical theory.It is concluded that the theoretical resonance/anti-resonance frequencies are consistent with the numerical and experimental results.When R_2 is at certain values,both the anti-resonance frequency and effective electromechanical coupling coefficient corresponding to the second mode have maximal values.The radial cascaded composite ultrasonic transducer is expected to be used in the fields of ultrasonic water treatment and underwater acoustics.     

压电陶瓷薄圆环振子径向振动的机电等效电路及其分析

本文对轴向极化压电陶瓷薄圆环的径向振动进行了研究，推出了其机电等效电路，得出了振子的共振和反共振频率方程并进行了实验验证。探讨了振子的共振和反共振频率与其材料和几何尺寸之间的依赖关系。     

径向极化压电陶瓷长圆管复合超声换能器的径向振动

提出了一种圆管式径向复合压电陶瓷换能器,并对其径向振动特性进行了分析。该换能器由径向极化的压电陶瓷圆管以及金属外圆管组成。利用解析法得出了金属圆管以及具有任意壁厚的径向极化压电陶瓷圆管径向振动的机电等效电路。基于金属圆管与压电圆管的机械边界条件,得出了换能器的六端机电等效电路。在此基础上得出了换能器共振及反共振频率方程的解析表达式,给出了换能器的共振及反共振频率与其几何尺寸之间的依赖关系。利用数值方法对换能器的径向振动特性进行了模拟及仿真,并与解析结果进行了比较。最后,设计并加工了一些径向复合管式压电陶瓷换能器,利用精密阻抗分析仪对其共振及反共振频率进行了实验测试。研究结果表明,利用解析理论得出的换能器共振及反共振频率与数值模拟结果以及实验测试结果符合很好。      

阶梯圆环压电超声换能器径向振动性能的理论研究*

提出了一种阶梯圆环径向振动压电超声换能器,根据力电类比原理建立了阶梯圆环及阶梯圆环换能器的径向振动等效电路,推导了阶梯圆环的径向共振频率方程和位移放大系数,在此基础上进一步推导了换能器的径向共振和反共振频率方程。通过理论推导和有限元仿真模拟分析了阶梯圆环压电超声换能器的径向振动性能。结果表明,增大阶梯圆环中内外环的径向厚度之比K1或减小轴向厚度之比K2,阶梯圆环的一阶径向共振频率减小,二阶径向共振频率增大;在二阶径向共振模式下,K1、K2值在一定范围内阶梯圆环可实现由内向外的径向位移振幅放大;随着压电陶瓷圆环的内半径增大,阶梯圆环压电超声换能器的一阶、二阶径向共振和反共振频率减小,二阶径向共振下的有效机电转换系数趋于零;增大阶梯圆环内环的外半径,换能器的一阶径向共振和反共振频率减小,二阶径向共振和反共振频率先增大后减小,理论推导与仿真模拟结果符合良好。本文研究结果为阶梯圆环压电超声换能器的工程应用提供理论参考。     

锥形剖面径向复合超声换能器的机电等效电路

研究了一种锥形剖面径向复合超声换能器。该换能器由一个等截面内金属圆环、一个轴向极化的压电陶瓷圆环和一个锥形剖面外金属圆环沿径向复合而成,且换能器的径向尺寸远大于高度。锥形剖面外金属圆环满足关系式h=h₀r,h₀为厚度变化常数。基于平面应力径向振动理论,推导了换能器的机电等效电路,得到了共振频率方程和反共振频率方程,进而研究了换能器的振动特性。并将理论计算的第1阶、第2阶径向共振频率和反共振频率与数值仿真结果相比较,二者结果一致。研究表明:锥形剖面换能器第1阶、第2阶径向共振频率、反共振频率、有效机电耦合系数不仅与换能器各部分的材料、径向几何尺寸有关,还与h₀有关。h₀越大,第1阶径向共振频率、反共振频率越大,有效机电耦合系数先增大后减小。与等截面相比,锥形剖面换能器沿径向向外辐射声波,辐射面积更大,辐射声功率更高,指向性更好。      

幂函数型环形聚能器径向振动的等效电路

基于机电类比原理和变厚度薄圆环的平面应力方程,推导了幂函数型环形聚能器径向振动的等效电路、共振频率方程和位移放大系数。讨论了第一、二阶径向共振频率及相应的位移放大系数随圆环半径比的变化关系。结果表明,幂函数型环形聚能器径向振动的等效电路是一种非互易二端口等效网络;一阶和二阶共振频率随圆环内外半径比的增大而增大;一阶径向共振模式下位移放大系数随圆环半径比的增大先降低后升高,二阶径向共振模式下位移放大系数随圆环半径比的增大而降低,但二阶时的位移放大系数整体大于一阶,因此二阶径向共振模式具有更好的径向振动性能。用COMSOL有限元软件对解析理论分析结果进行了验证,仿真模拟结果与解析理论符合良好。根据幂函数型环形聚能器的等效电路模型,进一步设计了一种压电环形换能器,计算了第一、二阶径向共振频率、反共振频率及有效机电耦合系数,通过与COMSOL有限元软件模拟结果对比,符合良好。本文研究结果为幂函数型环形聚能器及压电环形换能器的工程应用提供了简明设计理论,文中研究结论可作为一种径向超声切割刀在超声工程中获得重要应用。      

Study on the step-type circular ring ultrasonic concentrator in radial vibration

In this paper, the plane radial vibration of an isotropic metal thin circular rings is studied and its equivalent circuit model is obtained. Based on the equivalent circuit model, the step-type circular ring concentrator consisting of two metal thin circular rings in radial vibration is analyzed. Its compound equivalent circuit is derived and the resonance frequency equation is obtained. The relationship between the resonance frequency, the radial displacement amplitude magnification and the geometrical dimensions is analyzed. The resonance frequency of the step-type radial concentrator is calculated based on the resonance frequency equation. For comparison, the resonance frequency of the step-type radial concentrator is also obtained by using numerical method. It is illustrated that the resonance frequencies from these two methods are in a good agreement with each other.     

一种新型Cymbal换能器的研究

提出并研究了一种新型的Cymbal换能器.与传统的Cymbal换能器相比,该换能器中的压电陶瓷圆盘由一个金属圆环和压电陶瓷圆盘的径向组合体所代替.论文首先探讨了压电陶瓷圆盘和金属圆环组合体的径向振动,用解析方法得出了其径向振动的机电等效电路.在此基础上,得出了新型Cymbal换能器的机电等效电路,并得出了其共振及反共振...     

基于2-2型压电复合材料的新型宽频带径向振动超声换能器

本文提出了一种基于2-2型压电复合材料的新型宽频带径向振动超声换能器,它主要由内金属圆环和外压电陶瓷复合材料圆环组成.首先利用Newnham串并联理论和均匀场理论推导了2-2型压电复合材料的等效参数;其次利用解析法得到了金属圆环和径向极化压电复合陶瓷圆环径向振动的机电等效电路;最后得到了换能器的六端机电等效电路,从而得到了换能器的频率方程.接着分析了换能器共振频率和反共振频率以及有效机电耦合系数与几何尺寸、两相体积占比的关系,采用仿真软件对新型换能器的径向振动进行了数值模拟.结果表明,利用解析法得到的共振频率和反共振频率与数值模拟结果吻合较好.此外,对换能器在水下的辐射声场进行了仿真研究,结果表明新型复合材料径向换能器相比传统纯陶瓷径向换能器,发射电压响应幅值更大,工作带宽提高接近一倍,声匹配更佳.     

Study on the radial vibration and acoustic field of an isotropic circular ring radiator

Based on the exact analytical theory, the radial vibration of an isotropic circular ring is studied and its electro-mechanical equivalent circuit is obtained. By means of the equivalent circuit model, the resonance frequency equation is derived; the relationship between the radial resonance frequency, the radial displacement amplitude magnification and the geometrical dimensions, the material property is analyzed. For comparison, numerical method is used to simulate the radial vibration of isotropic circular rings. The resonance frequency and the radial vibrational displacement distribution are obtained, and the radial radiation acoustic field of the circular ring in radial vibration is simulated. It is illustrated that the radial resonance frequencies from the analytical method and the numerical method are in good agreement when the height is much less than the radius. When the height becomes large relative to the radius, the frequency deviation from the two methods becomes large. The reason is that the exact analytical theory is limited to thin circular ring whose height must be much less than its radius.     

钹型换能器的优化设计*

本文研究的钹型换能器,是由一个压电陶瓷圆环和一个金属浅球壳组成。为了得到这种钹型换能器的解析解和它在不同介质中的机电性能。首先,根据前人得出的压电陶瓷圆环和金属浅球壳的理论模型,用等效电路法从理论上计算出了该换能器的共振频率并与仿真结果做了对比,发现二者近似吻合,验证了理论计算的可靠性,为这种钹型换能器的优化设计提供了理论指导。然后利用COMSOL Multiphysics分别模拟了压电陶瓷为圆盘和圆环的钹型换能器的共振频率,仿真结果表明：同等条件下,当圆环的外径和圆盘的半径相等时,压电陶瓷为圆环的钹型换能器共振频率更低,使其具有频率低、体积小的特点更加明显。利用数值方法,分析了钹型换能器的几何尺寸对其共振频率、反共振频率及有效机电耦合系数的影响。最后模拟了钹型换能器在水中的机电特性及声压分布。     

复合圆环弯曲振动四极子模态分析

针对压电圆环弯曲振动机电转换性能较差的问题,提出了一种复合圆环弯曲振动换能器,它由一个径向极化的压电陶瓷内圆环和一个金属外圆环复合而成。基于能量原理推导得到了复合圆环弯曲振动的谐振频率和有效机电耦合系数,探讨了弯曲振动四极子模态特性与其结构尺寸间的关系。当压电圆环尺寸不变时,随外侧金属圆环壁厚增加,复合圆环弯曲振动四极子模态谐振频率上升,有效机电耦合系数迅速上升到极大值后缓慢下降。最后,设计制作了圆环换能器并对其谐振频率和有效机电耦合系数进行了实验测试,测试结果与解析结果和数值模拟结果吻合得较好。      

A new type of high power composite ultrasonic transducer

A new type of high power composite ultrasonic transducer was proposed and studied. The composite transducer consists of a sandwich longitudinal piezoelectric transducer, an isotropic metal hollow cylinder with large radial dimension, and the front and back metal radiation mass. By means of its special structure and Poisson’s effect, the composite transducer can produce vibrations both in its longitudinal and radial directions, and therefore, it can radiate sound waves in three-dimensional space. The electro-mechanical equivalent circuit of the composite transducer was derived and the resonance frequency equation was obtained analytically. Numerical methods were used to simulate the vibration of the composite transducer, and the vibrational displacement distribution, the resonance frequency and the radiation sound field are given. Some composite transducers are designed and manufactured; their resonance frequencies and the radiation acoustic field are measured and compared with the analytical and numerical results. It can be seen that the measured frequencies and acoustic field contour are in good agreement with the analytical and numerical results. It is expected that this kind of composite ultrasonic transducer can be used in more and more power ultrasonic applications, such as ultrasonic cleaning, ultrasonic extraction, ultrasonic sonochemistry and other ultrasonic liquid processing, where high ultrasonic power and large ultrasonic processing space are needed increasingly.     

Study on the high power air-coupled ultrasonic compound transducer

The high power air-coupled compound ultrasonic transducer in flexural vibration is studied. The transducer consists of a sandwich longitudinal piezoelectric transducer and a circular thin plate in flexural vibration. The resonance frequency equation and the equivalent circuit of a circular radiator with clamped boundary condition are derived. The resonance frequency equation and the equivalent circuit of the compound transducer are also obtained. The radiated acoustic field of the circular thin plate radiator is analyzed and the directional pattern is calculated. It can be seen that when the vibrational order of the circular thin plate in flexural vibration is increased, the radiated acoustic field becomes complex.     

Radial vibration and ultrasonic field of a long tubular ultrasonic radiator

The radial vibration of a metal long circular tube is studied analytically and its electro-mechanical equivalent circuit is obtained. Based on the equivalent circuit, the radial resonance frequency equation is derived. The theoretical relationship between the radial resonance frequency and the geometrical dimensions is studied. Finite element method is used to simulate the radial vibration and the radiated ultrasonic field and the results are compared with those from the analytical method. It is concluded that the radial resonance frequency for a solid metal rod is larger than that for a metal tube with the same outer radius. The radial resonance frequencies from the analytical method are in good agreement with those from the numerical method. Based on the acoustic field analysis, it is concluded that the long metal tube with small wall thickness is superior to that with large wall thickness in producing radial vibration and ultrasonic radiation. Therefore, it is expected to be used as an effective radial ultrasonic radiator in ultrasonic sewage treatment, ultrasonic antiscale and descaling and other ultrasonic liquid handling applications.     

Equivalent circuits and directivity patterns of air-coupled ultrasonic transducers

Air-coupled transducers for producing ultrasonic radiation in gases are studied. The transducer consists of a circular thin plate in flexural vibration and a sandwich longitudinal electromechanical vibrator that is attached to the center of the plate. The lowest-order axially symmetric flexural vibrational mode of a circular thin plate is analyzed. The equivalent circuits of the circular plate in flexural vibration and the compound transducer are presented and the frequency equation is derived. The radiated ultrasonic field of the circular thin plate in flexural vibration is calculated and the directivity pattern is obtained theoretically. Some transducers of this type are designed according to the frequency equation, and their resonance frequencies are measured. The measured resonance frequencies are in good agreement with the theoretical results, and the calculated radiation ultrasonic field is also in good agreement with the measured results of a previous work.     

压电陶瓷复合换能器固有频率的有限差分法*

为丰富换能器固有频率的研究理论，以及提供一种新的计算方法供工程人员选择，提出了计算其固有频率的有限差分法。以由径向极化的压电陶瓷圆管与金属预应力管沿径向复合而成的二元压电陶瓷复合换能器为例，建立并推导了其向振动的数学模型及其有限差分形式，给出了换能器径向振动的特征方程。利用MTALAB对计算实例的径向振动的固有频率进行编程计算，理论计算结果与已有实验结果符合很好，验证了有限差分法计算压电陶瓷复合换能器固有频率的可行性及准确性。通过仿真计算，给出了换能器径向振动固有频率与其结构尺寸的影响关系：换能器径向振动的固有频率随压电陶瓷圆管内径的增大而降低，随换能器壁厚比的增大而降低。该文所建立的换能器径向振动固有频率的有限差分法同样适用于结构形式相近的换能器及其他元器件。     

矩形辐射器压电多频超声换能器的研究

研究了一种具有多个共振频率的矩形辐射器夹心式超声换能器,换能器由圆柱形后盖板、压电陶瓷晶堆及矩形六面体辐射器前盖板组合而成。利用表观弹性法和一维近似理论给出了多频换能器横向及纵向理论共振频率方程。对一种特殊情况下的此类换能器进行了有限元及实验分析,给出了各自的频率输入导纳曲线。对理论和实验结果进行分析后表明,此类矩形辐射器夹心式超声换能器可以在不同的振动模态上工作,具有多个共振频率.