The role of hydrogen bonding on a hydroxylated liquid crystal, bis [4-(5-hydroxypentyloxycarbonyl)phenylene] terephthalate

Hydroxyl-terminated liquid crystalline bis[4-(5-hydroxypentyloxycarbonyl)phenylene] terephthalate (BHT) was prepared and compared with its non-hydroxylated analog, bis[4-(pentyloxycarbonyl)phenylene] terephthalate (BPT). BHT, with the possibility to form intermolecular hydrogen bonding (H-bonding), has higher thermal transition temperatures (T_m and T_i) than BPT. Infrared spectroscopy was applied to prove the existence of H-bonding for BHT. An X-ray diffraction study suggests that the smectic A (S_A) phase is the only phase existing for BPT but for BHT, an interdigitated layered structure was found to be mixed with the S_A phase. The formation of this interdigitated layered structure is mainly due to the intermolecular H-bonding between the terminal hydroxyl and the external ester groups in BHT.     

一种双钒帽多金属氧酸盐的水热合成及其晶体结构和热稳定性

采用水热法合成了一种双钒帽多金属氧酸盐[CrⅢ(1,10-phen)2(H2O)]2[PMoⅤ6MoⅥ6O40(VⅣO)2(OH)];利用元素分析、红外光谱、单晶X射线衍射表征了其组成和分子结构,利用热重分析测定了其热稳定性.结果表明,合成的化合物由无序的双帽假Keggin型[PMoⅤ6MoⅥ6O40(VⅣO)2(OH)]6-杂多阴离子和两个[CrⅢ(1,10-phen)2(H2O)]3+配位阳离子单元组成,其热失重分两步进行,热稳定性良好.     

三唑含能离子盐的热化学性质和热动力学行为

用微量热技术测量1,2,4-三唑硝酸盐(1a)、1,2,3-三唑硝酸盐(1b)、3,4,5-三氨基-1,2,4-三唑硝酸盐(2a)、3,4,5-三氨基-1,2,4-三唑二硝酰胺盐(2b)4种三唑类含能离子盐的溶解过程热效应、比热容(283KT353K)及非等温条件下的热分解过程.用处理实验数据和理论计算方法获得了1a、1b、2a、2b溶解过程的热化学方程式、微分溶解焓、摩尔溶解焓、动力学方程式、活化能、指前因子、283～353K温区内比热容随温度变化的线性关系式、标准摩尔热容CpΘ,m和285～353K温区以298.15K为基准的焓、熵和Gibbs自由能函数值.计算了热分解反应的动力学参数、热力学参数以及评估了1a、1b、2a、2b对热的抵抗能力.得到了化合物性质与分子结构之间内在关系的信息.     

测试条件对静态热机械分析仪测试CLTE的影响

利用静态热机械分析仪（TMA）测试了聚丙烯（PP）的线性热膨胀系数（CLTE）,考察了PP在不同的测试条件下的线性热膨胀系数的变化规律,结果表明力值、升温速率、热历史和测试方向对CLTE结果有影响。     

High‐thermally stable and high‐bandwidth graded index plastic optical fiber for vehicle networks

Radial refractive index profiles within the graded index plastic optical fiber (GI‐POF) is formed by adding a dopant to a polymer. This addition of the dopant significantly decreased the T_g of the polymer due to the plasticization. This disadvantage made the installation of the GI‐POF difficult, especially in vehicle networks in which high thermal stability is required. We have suggested 9‐bromophenanthrene (BPT) as a novel dopant induced less plasticization for poly(methyl methacrylate) (PMMA) than the conventional dopants. However, although the fabricated GI‐POF using BPT had high enough thermal stability for vehicle networks, the attenuation was 800 dB/km and it could not be used. This high attenuation was caused by contaminant in the fabrication process of fibers. In this study, we succeeded to fabricate a GI‐POF with low‐attenuation and high‐thermal stability using highly pure BPT. Its attenuation was improved to 240 dB/km at 650 nm, which was enough transparency for vehicle networks. The T_g of the GIPOF was improved to 107 °C from 90 °C. The thermal stability of the GI‐POF below 85 °C/dry and 75 °C/85%RH was demonstrated to be as high as that of the commercially available step index POF. The bandwidth of the GI‐POF could be estimated over 4.0 GHz for the 50‐m fiber. These results demonstrated that our GI‐POF should qualify to be used in vehicle network. © 2011 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 49: 1464–1469, 2011     

新型光、 热双响应形状记忆聚合物的制备与性能

通过多巴胺表面原位聚合反应修饰玻璃微珠, 利用X光电子能谱仪(XPS)和傅里叶变换红外光谱仪 (FTIR)对修饰前后玻璃微珠表面的化学组成进行了表征, 用热失重分析仪(TGA)对其热稳定性进行了测试, 并利用透射电子显微镜(TEM)和扫描电子显微镜(SEM)对其形貌进行了观察; 研究了改性玻璃微珠对形状记忆共混物聚己内酯和聚氨酯(PCL/TPU)的热性能、 力学性能和形状记忆性能的影响. 结果表明, 成功制备了表面包覆聚多巴胺的玻璃微珠(PHGM), 改性玻璃微珠的加入不仅增强了复合材料的力学性能(当改性玻璃微珠含量为3%时, 材料的拉伸强度提高到53.3 MPa, 杨氏模量提高到178.4 MPa), 还赋予了复合材料优异的光热效应. 所制备的形状记忆复合材料在808 nm近红外光的照射下, 可以在短时间内(7 s)升高到材料的开关温度并回复到初始形状.     

石蜡/膨胀石墨/石墨烯复合相变储热材料的制备及性能

以石蜡(PA)作为相变储热材料、 膨胀石墨(EG)作为主导热材料和支撑材料, 石墨烯气凝胶(GA)作为导热增强材料和辅支撑材料制备了PA/EG/GA复合相变材料, 研究了GA添加量对复合相变材料相变温度、 相变潜热、 导热性能以及循环稳定性的影响. 结果表明, 所制备的80%PA-17%EG-3%GA复合相变材料导热性能良好, 循环稳定性出色. 与80%PA-20%EG复合材料相比, 该材料的相变温度、 相变潜热以及循环稳定性无明显变化, 但导热系数由4.089 W/(m·K)提升到了5.336 W/(m·K), 显示出良好的应用前景.     

Synthesis and characterization of an acrylate polymer containing chlorine-1,3-dioxalane groups in side chains

Poly[2-（4-chlorophenyl）-1,3-dioxolan-4-yl]methyl acrylate,poly（CPhDMA）,was synthesized with radical polymerization process using 2,2′-azobisisobutyronitrile as radical initiator in 1,4-dioxane at 60℃.The structure of poly（CPhDMA） was confirmed by means of UV-Vis,FT-IR,¹H-NMR,and ¹³C-NMR spectral techniques.The molecular weight distribution values of the polymer were determined with gel permeation chromatography（GPC）.The number-average molecular weight（M_n）,weight-average molecular weight（M_W） and polydispersity index（PDI） values of poly（CPhDMA） were determined to be 10300,21600 and 2.097,respectively.The thermal degradation kinetics of the polymer was investigated by using TG/DTG-DTA and DSC analyses at different heating rates in dynamic nitrogen atmosphere.The apparent activation energy values obtained by Flynn-Wall-Ozawa and Friedman methods were found to be 91.68 and 85.23 kJ mol^-1,respectively,for thermal decomposition of poly（CPhDMA）.Also,the thermal degradation activation energy value of poly（CPhDMA） was calculated by using the Kissinger method based on the DTG,DTA and DSC data.Then the mechanism function of it was determined by master plots method.Finally,electrical and optical properties of poly（CPhDMA） were determined by four-point probe and UV-Vis techniques,respectively.     

基于胶束插层方法制备高热稳定性和大层间距有机化蒙脱土

采用不同方法制备了多种有机化蒙脱土,并分别采用X射线衍射仪、红外光谱分析仪、热重分析仪、电感耦合等离子体发射光谱仪、元素分析仪、扫描电子显微镜对产物进行了表征,并提出了有机物插层新方式——胶束插层.结果表明:适量钠基蒙脱土(Na-MMT)、十六烷基三甲基溴化铵(CTAB)和磷酸三苯酯(TPP)在丙酮/水的混合溶剂中进行溶液插层,得到的有机化蒙脱土具有更大的层间距,比单纯采用CTAB的插层效果显著.产物中含有约21.54%的CTAB和17.47±1.05%的TPP,插层机理为CTAB-TPP胶束插层.该有机化蒙脱土的初始热降解温度比单纯CTAB插层蒙脱土最多提高了17.4℃.采用该方法制备的改性蒙脱土既可以进一步提高蒙脱土的层间距,又可以封闭TPP于MMT的片层间,阻止TPP挥发;同时克服季铵盐改性蒙脱土的热稳定性低的问题,得到了层间距大、热稳定性高的有机化蒙脱土,为有机化蒙脱土在高熔点聚合物改性方面提供了条件.     

离子液体增塑生物基聚丁内酰胺的热分解机理

采用疏水性1-丁基-3-甲基咪唑六氟磷酸盐([BMIM]PF₆)和亲水性1-丁基-3-甲基咪唑四氟硼酸盐 ([BMIM]BF₄)两种咪唑类离子液体(IL)增塑聚丁内酰胺(PBL), 探讨了IL对PBL结晶性能及热性能的影响. 研究发现, 两种IL都会削弱PBL分子间氢键, 并抑制PBL晶体在(200)晶面的生长, 降低PBL结晶度. 当IL添加质量分数为5%时, 增塑膜熔点下降7~8 ℃. 与纯PBL膜相比, [BMIM]BF₄增塑PBL膜热稳定性下降, 而[BMIM]PF₆增塑PBL膜的热稳定性提高. [BMIM]PF₆增塑PBL膜热分解过程的热动力学分析结果表明, 其热分解反应活化能为46.68 kJ/mol, 反应级数为1, 热分解最概然机理函数模型符合Mampel单行法则(一级), 即PBL受到热刺激后, 在聚合物和分解产物界面无规律成核, 反应核心具备反应活性, 随后反应逐步扩大, 直至结束.     

共聚结构和分子量对热塑性聚酰亚胺树脂熔融与耐热性能的影响

基于具有刚性主链结构的4,4'-(六氟亚异丙基)双邻苯二甲酸酐/对苯二胺(6FDA/p-PDA)树脂体系, 通过共聚引入间苯二胺(m-PDA)、 4,4'-二氨基-2,2'-双三氟甲基联苯(TFDB)和9,9'-双(4-氨基苯基)芴(BAFL)等主链刚性且兼具大自由体积特性的芳香二胺, 以非反应性封端剂邻苯二甲酸酐(PA)对分子量进行调控, 设计制备了系列分子量可控的热塑性聚酰亚胺(TPI)树脂. 系统研究了共聚结构和分子量对TPI树脂熔融性能和耐热性能的影响, 构建了聚合物的聚集态结构与树脂熔融性能的对应关系, 并对树脂的室温和高温力学性能进行了评价. 研究结果表明, 大自由体积的芳香二胺共聚结构的引入可有效降低分子链堆砌密度, 增大聚合物的自由体积, 从而赋予树脂良好的熔融性能. 降低设计分子量可进一步改善树脂的熔融加工性. 这类具有刚性主链结构的TPI树脂兼具优异的耐热性能和力学性能, 树脂的玻璃化转变温度在308~338 ℃之间, 以TFDB和BAFL共聚制备的TPI-C-25K和TPI-D-25K树脂表现出高强高韧的特性, 拉伸和弯曲强度分别超过120 MPa和190 MPa, 断裂伸长率大于8.2%, 并且在250 ℃高温下表现出良好的耐热稳定性.     

新型铕,铽(Ⅲ)三元配合物的合成、表征及发光性能

采用Claisen缩合反应设计合成了β-二酮配体1-(4-溴苯)-4,4,4-三氟丁烷-1,3-二酮(BPT),并合成了相应的新型稀土Eu,Tb(Ⅲ)三元配合物。通过元素分析、1H NMR谱、红外光谱、紫外光谱、荧光光谱和磷光光谱技术对合成的产物进行了表征和分析。红外光谱分析表明:BPT中存在着酮式-烯醇式互变;配合物中的稀土离子与BPT中的氧原子以及Phen中的氮原子形成了配位键。紫外光谱表明配合物主要是由第一配体BPT吸收能量。荧光光谱显示Eu(BPT)3Phen的发光强度较大,进一步的研究表明,BPT的最低三重态能级与Eu3+的5D0能级匹配较好。     

聚氯乙烯的有机辅助热稳定剂的研究进展

聚氯乙烯(PVC)的有机辅助稳定剂包括含N有机稳定剂、含P有机稳定剂、含O有机稳定剂、含S有机稳定剂等四种类型。其中含O有机稳定剂和含S有机稳定剂对改善PVC初期着色和长期稳定性效果显著,是PVC的有机辅助稳定剂发展的重要方向。文章介绍了PVC的有机辅助稳定剂的作用机理及应用进展。     

Antioxidant activity of the new thiosulfinate derivative, S-benzyl phenylmethanethiosulfinate, from Petiveria alliacea L

The antioxidant effects of the new thiosulfinate derivative, S-benzyl phenylmethanethiosulfinate (BPT), against the oxidation of cumene and methyl linoleate (ML) in chlorobenzene were studied in detail using HPLC. The results showed that BPT provided effective inhibition with a well-defined induction period under these oxidation conditions, and it was found that the stoichiometric factor (n), the number of peroxyl radicals trapped by one antioxidant molecule, of BPT is about 2. We then undertook a thorough investigation aimed at elucidating the active structural site of BPT. Various model compounds, such as diphenyl disulfide, dibenzyl disulfide, S-phenyl benzenethiosulfinate and S-ethyl phenylmethanethiosulfinate, were used which provided evidence that the benzylic hydrogen of BPT is mainly associated with the peroxyl radical scavenging. Moreover, we measured the rate constant for the reaction of BPT with peroxyl radicals derived from cumene and ML in chlorobenzene, and based on these measurements, BPT reacts with these peroxyl radicals with a rate constant of k(inh) = 8.6 x 10(3) and 6.2 x 10(4) M(-1) s(-1), respectively.     

一种新星型大分子——六对甲酰胺乙酸甲酯苯氧基环三磷腈的合成及其热性能、水解性能的表征

本文以六氯环三磷腈（HCCP）为原料合成了一种以甘氨酸甲酯苯氧基为侧基的新星型环三磷腈化合物六对甲酰胺乙酸甲酯苯氧基环三磷腈（HGPCP）及其中间体,并采用^1H NMR,^13CNMR,^31PNMR,FFIR和元素分析技术对其结构进行了确认．通过TGA、DSC、FrIR技术和测定水解液的紫外光谱,水解残余物剩余质量,残余物的磷含量方法分别对化合物的热性能和水解性能进行了表征．通过比较HGPCP在酸碱环境下的水解结果,发现水解504h,样品的水解过程尚处于化合物侧链断裂阶段,其37℃在酸性缓冲溶液（pH1．0）下较中性缓冲溶液（pH1．0）更易水解．由于其可能在高温下生成交联结构,六对醛基苯氧基环三磷腈（HCPCP）,六对羧基苯氧基环三磷腈（HCPCP）和HGPCP在800℃时碳残余量分别为75％、47％和47％,都表现出良好的热稳定性．     

铜粒子负载泡沫基相变复合材料的制备与性能

以三聚氰胺泡沫(MF)经高温碳化后制得的碳泡沫(CF)为基体, 以氯化铜(CuCl₂)和水合肼(N₂H₄·H₂O)溶液为前驱体, 利用氧化还原反应在泡沫骨架上生成铜粒子, 然后通过真空浸渍法将聚乙二醇(PEG)封装在基体中制得相变复合材料. 利用扫描电子显微镜(SEM)、 X射线衍射仪(XRD)、 差示扫描量热仪(DSC)和红外热成像仪等研究了相变复合材料的形貌、 结构和热性能. 结果表明, 当CuCl₂浓度为1.0 mol/L时, Cu粒子均匀致密地沉积在CF骨架表面, 制得的相变复合材料在具备良好密封性能的前提下, 相变潜热可高达145.2 J/g, 热效率超过80%, 光热转换效率达到83.8%, 且呈现出优异的储热能力和调温性能. 本文为制备综合性能优异的相变复合材料提供了一种策略, 有利于拓宽相变复合材料的应用领域.     

导热膨胀石墨/聚醚酰亚胺复合材料的制备与性能

利用膨胀石墨(EG)经高温处理后比表面积大的特点, 以膨胀石墨作为导热填料, 通过球磨和热模压方法制备了膨胀石墨/聚醚酰亚胺(PEI)导热复合材料, 并对其加工过程、 微观形貌、 热性能和导热性能进行了研究. 结果表明, 球磨处理可以打破膨胀石墨的“泡沫”状态并减少石墨纳米片间的间隙, 热压可以诱使和促进石墨纳米片沿着水平方向排列和取向, 从而显著提升了复合材料的平面内导热性能. 当膨胀石墨在复合材料中的质量分数为20%时, EG/PEI复合材料的面内导热系数为2.38 W?m^?1?K^?1. 与PEI相比, 复合材料导热系数的增幅约为12倍. 所制备的EG/PEI复合材料均具有良好的散热能力、 较好的热稳定性和较高的储能模量, 是一种综合性能优异的导热材料.     

Self-assembled monolayers of ferrocene-substituted biphenyl ethynyl thiols on gold

Homogeneous and mixed [with biphenylthiol (BPT)] self-assembled monolayers (SAMs) of ferrocene-substituted biphenyl ethynyl thiols (Fc) were prepared on Au(111) substrates and characterized by several complementary spectroscopic techniques. The mixed films were fabricated either by subsequent immersion of the substrates into the BPT and Fc solutions or by immersion of the substrate into a mixed solution of BPT and Fc. The first procedure resulted in the preparation of high-quality mixed SAMs, in which the Fc molecules were stochastically distributed in the BPT matrix and well-separated from each other. The portion of these molecules in such films could be precisely varied from ca. 7 to 42% by selection of the immersion time in the BPT solution. The films prepared from the mixed solution exhibited a phase separation between the Fc and BPT constituents. These films contained mostly the Fc molecules ( approximately 80-90%), showing, thus, a significant deviation from the relative content of the target molecules in the primary solution (a 1:1 ratio). This finding shows that the Fc molecules, when competing with BPT, preferably adsorb onto Au(111) substrate, suggesting a significant impact of the ferrocene groups onto the structure-building interactions responsible for molecular self-assembly.     

改性氧化石墨烯稳定Pickering乳液法制备高导热相变整体材料

采用表面引发原子转移自由基聚合法(SI-ATRP)改性氧化石墨烯(GO), 并用其稳定Pickering高内相乳液, 一步成型制得高导热氧化石墨烯/石蜡复合整体相变材料. 通过SI-ATRP方法, 在氧化石墨烯表面引入分子刷, 提高GO的分散性, 实现了低GO含量下优异的导热强化效果. 当GO添加量仅为相变复合材料整体的0.4%(质量分数)时, 其热导率(3.968 W?m^-1?K^-1)比纯石蜡的热导率(0.608 W?m^-1?K^-1)有较大提升. 通过测试发现, 在1000次循环后相变材料的泄漏率仅为1.1%~1.3%, 表现出良好的形状稳定性和热可靠性. 制备的新型形状稳定相变材料在温控、 储能应用中具有潜在的用途.     

新型单组份磷-氮膨胀型阻燃剂的热分解动力学

利用热重分析法研究了在不同升温速率下新型单组份磷-氮膨胀型阻燃剂六(4-(9,10-二氢-9-氧杂-10-磷杂菲-10-氧化物)-羟甲基苯氧基)环三磷腈(DOPOMPC)在氮气气氛和空气气氛中的热分解动力学.采用Kissinger和Flynn-Wall-Ozawa(FWO)法分别计算出DOPOMPC在相应气氛下的活化能和指前因子.