分析化学取样理论研究进展

从化学计量学角度就分析化学的取样理论研究进行了系统总结。主要包括：取样误差与研究总体的理化性质间的关系;现代数理统计的理论和方法在分析取样中的应用;分析取样的质量控制。为深入研究并完善分析取样理论做了评述及展望。     

分层性物质的组合取样误差与份样数目之间的关系及其Monte Carlo模拟

本文从理论上研究了分层性物质的组合取样误差与份样数目之间的定量关系，表明份样数目与组合取样相对标准偏差的平方之积为一常数，称为组合取样常数，它与Ｉｎｇａｍ ｅｌｌｓ 和Ｓｗ ｉｔｚｅｒ 提出的取样常数是相似的，表示６８％ 置信度下组合取样的相对标准偏差达到１％ 时的份样数目。应用Ｍｏｎｔｅ Ｃａｒｌｏ 模拟技术对该理论进行了验证，结果令人满意。     

固体分层取样方案的最优化设计

本文首次从理论上探讨了取得量对分层取样误差的影响,提出了总取样量一定时各层的最佳取样量和最小取样方差的计算公式,从而为分层取样的最佳取样方案设计提供了理论依据。     

应用Monte Carlo模拟法探讨分层性物质的组合取样精度

应用MonteCarlo模拟法研究了分层性物质的组合取样精度,探讨了组合样中组分含量的分布规律、组合取样方差的分布规律、组合取样方差估计值的精度与组合样本数目之间的关系等.考察了组分含量服从正态分布、均匀随机分布及多项分布的分层性总体.结果表明,当样本数目较多时,组合取样误差规律对于不同原始分布的总体是相似的.     

二元颗粒混合物按质量取样的误差研究

二元颗粒混合物的随机取样方式有两种：一是按颗粒数目取样,二是按质量取样本文对二元颗粒混合物按质量取样的误差进行了深入研究,详细分析了混合物的各种参对被测组分含量取样误差的影响,应用Ｍｏｎｔｅ Ｃａｒｌｏ技术对取样进行了模拟。以颗粒药品的二元混合物为例对按颗粒数目取样和按质量取样的误差进行了比较。此项研究对于分析取样理论和应用具有重要的价值。     

计算机模拟地质化验室分样及取样常数Ks的估算

提出了计算机模拟地质化验室取样过程,考察取样误差与取样量、样品粒度之间关系,并估算取样常数。实验所得的误差与取样量之间的关系与Ingamells的取样方程一致,取样常数及取样常数和样品粒度关系式也与Ingamells推导的相符。由于计算机模拟是一颗颗取样,不用预设分布模式,不存在分析方法误差和分样操作误差的叠加,误差完全是因样品本身不均匀产生的。而且计算机模拟运算速度快,参数变换方便,使模拟更接近样品实际,能满足地质化验室的应用。     

微渗析活体取样-NiHCF修饰电极色谱电化学检测的研究

研究了六氰合亚铁酸镍修饰电极对单胺类递质及其代谢产物的催化机理，首次以该 电极为色谱电化学检测器，对８种物质进行了分离测定。同时，将微渗析活体取样技术与高 效液相色谱一电化学检测联用测定了ＳＤ大鼠脑尾核处的单胺类递质及其代谢产物，并研究了 Ｃａ２＋浓度对脑中递质的影响，拓展了电分析化学在生物活体分析中的应用范围。     

微渗析活体取样—NiHCF修饰电极色谱电化学检测的研究

研究了六氰合亚铁酸镍修饰电极对单胺类递质及其代谢产物的催化机理，首次以该电极为色谱电化学检测器，对８种物质进行了分离测定，同时，半微渗析活体取样技术与高效液相色谱－电化学检测联用测定ＳＤ大鼠脑尾核处的单胺类递质及其代谢产物，并研究了Ｃａ＾２＋浓度对脑中递质的影响，拓展了电分析化学在生物活体分析中应用范围。     

分析化学的“昨天、今天和明天”

简述了分析化学的发展历史。分析化学的"昨天",从基于物理化学的溶液理论,以目视可见为工具的"化学分析",进入以物理方法为基础的仪器分析,因此有人提出"化学正在走出分析化学";分析化学的"今天",因为它的主体任务是解决物质的分子原子结构和成分,所以又回归化学领域;对分析化学的"明天"寄厚望,分析化学走出历来仅仅以"为他人报告提供数据"的技术支持者的角色,成为"实际问题解决者",利用分析化学中综合分析的"剖析技术",为新产品开发创制的"反工艺研究"做出独特的贡献。     

分析测试中取样单元数的确定——关于分析化学教材中取样问题的商榷

对武汉大学主编的《分析化学》（上册）第5版教材中关于取样单元数的计算进行了讨论,指出测量次数与采样单元数是不同的概念,在已知采样单元间的标准偏差估计值和允许误差的情况下,采样单元数应该用试差法求得。     

取样方差估计值的精度与样本数目之间的关系

通过数学推导建立了取样方差估计值的精度与样本数目之间的定量关系。实验也证明,取样方差估计值的标准偏差与样本数目的平方根之积可近似为一常数。应用蒙特卡罗技术模拟随机取样,对该关系式进行了验证,并探讨了取样方差估计值的分布规律,表明其规律对于组分含量服从正态分布,均匀随机分布及多项分布总体是相似的。     

Korngrößenänderung beim Carburieren von Wolfram und Sintern von Wolframcarbid

The change of grain size during each stage of the process was studied, mainly by optical and electron microscopy. The grain size has a marked effect on the properties of cemented carbide. In order to determine the process of formation of WC powder, the cross section and the surface of the carburized powder were examined microscopically. The mechanisms of carburization and grain growth were clarified. The microstructural relationship between the WC powder and the cemented carbide was also determined. The Co from the ball milled WC-Co mixed powder was extracted and the remaining WC powder was studied microscopically and by determining the grain size distribution. Methods of particle crushing and their effect on differences between various forms of WC powder were studied. Grain growth in sintering and the effect of grain size distribution were also studied. It was concluded that grain growth begins long before the appearance of the liquid phase. Finally it was pointed out that the inner structure of WC should be studied at the atomic level.     

Testing green coffee for ochratoxin A, part I: estimation of variance components

The variability associated with testing lots of green coffee beans for ochratoxin A (OTA) was investigated. Twenty-five lots of green coffee were tested for OTA contamination. The total variance associated with testing green coffee was estimated and partitioned into sampling, sample preparation, and analytical variances. All variances increased with an increase in OTA concentration. Using regression analysis, mathematical expressions were developed to model the relationship between OTA concentration and the total, sampling, sample preparation, and analytical variances. The expressions for these relationships were used to estimate the variance for any sample size, subsample size, and number of analyses for a specific OTA concentration. Testing a lot with 5 microg/kg OTA using a 1 kg sample, Romer RAS mill, 25 g subsamples, and liquid chromatography analysis, the total, sampling, sample preparation, and analytical variances were 10.75 (coefficient of variation [CV] = 65.6%), 7.80 (CV = 55.8%), 2.84 (CV = 33.7%), and 0.11 (CV = 6.6%), respectively. The total variance for sampling, sample preparation, and analytical were 73, 26, and 1%, respectively.     

Testing shelled corn for aflatoxin, Part I: estimation of variance components

The variability associated with testing lots of shelled corn for aflatoxin was investigated. Eighteen lots of shelled corn were tested for aflatoxin contamination. The total variance associated with testing shelled corn was estimated and partitioned into sampling, sample preparation, and analytical variances. All variances increased as aflatoxin concentration increased. With the use of regression analysis, mathematical expressions were developed to model the relationship between aflatoxin concentration and the total, sampling, sample preparation, and analytical variances. The expressions for these relationships were used to estimate the variance for any sample size, subsample size, and number of analyses for a specific aflatoxin concentration. Test results on a lot with 20 parts per billion aflatoxin using a 1.13 kg sample, a Romer mill, 50 g subsamples, and liquid chromatographic analysis showed that the total, sampling, sample preparation, and analytical variances were 274.9 (CV = 82.9%), 214.0 (CV = 73.1 %), 56.3 (CV = 37.5%), and 4.6 (CV = 10.7%), respectively. The percentage of the total variance for sampling, sample preparation, and analytical was 77.8, 20.5, and 1.7, respectively.     

Nanoparticle formation using a plasma expansion process

We describe a process in which nanosize particles with u narrow size distribution are generated by expanding a thermal plasma carrying vapor-phase precursors through a nozzle. The plasma temperature and velocity profiles are characterized by enthalpy probe measurements. by calorimetric energy balances. and by a model of the nozzle flow. Aerosol samples are extracted from the flow downstream of the nozzle by means of a capillary probe interfaced to a two-stage ejection diluter. The diluted aerosol is directed to a scanning electrical mobility spectrometer (SEMS) which provides on-line size distributions down to particle diameters of 4 nmt. We have generated silicon, carbon, and silicon carbide particles with number mean diameters of about 10 not or less, and we have obtained some correlations between the product and the operating conditions. Inspection of the size distributions obtained in the experiments, together with the modeling results, suggests that under our conditions silicon carbide formation is initiated by nucleation of extremely small silicon particles from supersaturated silicon vapor, followed by chemical reactions at the particle surfaces involving carbon-containing species from the gas phase.     

高频红外碳硫分析仪测定含碳化硅耐火材料中碳化硅含量

采用对试样进行灼烧预处理的方法,除去游离碳,用锡粒、纯铁、钨粒作为助熔剂,并以钢铁标准样品校正仪器,高频燃烧红外吸收法测定含碳化硅耐火材料中的碳化硅含量,测定结果的相对标准偏差为1.07%(n=6),该法与化学法的测定结果较接近,精密度和准确度均满足化学分析的要求。     

Effect of pH of aqueous ceramic suspensions on colloidal stability and precision of analytical measurements using slurry nebulization inductively coupled plasma atomic emission spectrometry

Colloidal stability of silicon nitride, silicon carbide and boron carbide aqueous slurries used for slurry nebulization inductively coupled plasma atomic emission spectrometry has been investigated in the pH range 2–10 by electrophoretic mobility and particle size measurements, together with sedimentation tests. The mean particle size of silicon nitride and silicon carbide suspensions change with increasing pH showing a maximum at the isoelectric points (pH 7.5 and 5.5 respectively). The particle size distribution of boron carbide slurries remains practically constant and the zeta potential of suspended boron carbide particles shows a small change in the pH range investigated. The silicon nitride and silicon carbide slurries have good stability at pH below 5 and above 8, respectively. Boron carbide slurries show excellent stability in the whole pH range investigated. The time demand for stabilization of the emission line intensities from the start of nebulization strongly depends on the colloidal stability of slurries. Consequently, it is advantageous to nebulize aqueous suspensions with a pH as far from the isoelectric point of the solid as possible and with the ionic strength of the dispersion medium as low as possible. The RSD values of the line intensity measurements determined after 3 min stabilization time decrease with increasing stability of the aqueous slurries.