Luminescence properties of Ce and Tb co-activated ZnAl2O4 phosphor

In this study, a solution combustion method was used to prepare green emitting Ce³⁺–Tb³⁺ co-activated ZnAl₂O₄ phosphor. The samples were annealed at 700 °C in air or hydrogen atmosphere to improve their crystallinity and optical properties. X-ray diffraction study confirmed that both as-prepared and post-preparation annealed samples crystallized in the well known cubic spinel structure of ZnAl₂O₄. An agglomeration of irregular platelet-like particles whose surfaces were encrusted with smaller spheroidal particles was confirmed by scanning electron microscopy (SEM). The fluorescence data collected from the annealed samples with different concentrations of Ce³⁺ and Tb³⁺ show the enhanced green emission at 543 nm associated with ⁵D₄→⁷F₅ transitions of Tb³⁺. The enhancement was attributed to energy transfer from Ce³⁺ to Tb³⁺. Possible mechanism of energy transfer via a down conversion process is discussed. Furthermore, cathodoluminescence (CL) intensity degradation of this phosphor was also investigated and the degradation data suggest that the material was chemically stable and the CL intensity was also stable after 10 h of irradiation by a beam of high energy electrons.     

Surface chemical changes of CaTiO3:Pr upon electron beam irradiation

Surface chemical changes of CaTiO₃:Pr³⁺ phosphor material and their effect on the red emission intensity of the ¹D₂→³H₄ transition of Pr³⁺, upon electron beam irradiation are presented. Red emission at 613 nm was obtained upon probing the surface with a 2 keV electron beam. The surface chemical changes and Pr³⁺ red emission were monitored using an Auger Electron Spectroscopy (AES) and Cathodoluminescence (CL) spectrometer, respectively. The CL intensity decreased with a decrease in O on the surface at 1×10⁻⁸ Torr base pressure and decreased with an increase in O on the surface at 1×10⁻⁶ Torr O₂. The X-ray Photoelectron Spectroscopy (XPS) revealed that CL degradation at 1×10⁻⁶ Torr O₂ is due to the formation of CaO and CaO_x as well as TiO₂/Ti₂O₃ non-luminescent species on the surface.     

Characterization, EPR and luminescence studies of ZnAl2O4:Mn phosphors

ZnAl₂O₄:Mn green light emitting powder phosphors have been prepared by urea combustion technique involving furnace temperatures about 500 °C in a short time (<5 min). The prepared powders were characterized by X-ray diffraction, scanning electron microscopy, Fourier-transform infrared spectrometry and the surface area measurements by a Brunauer-Emmet-Teller (BET) adsorption isotherms. The EPR spectrum exhibits a resonance signal at g≈2.0, which shows a six-line hyperfine structure (hfs). From the EPR spectra the spin-Hamiltonian parameters have been evaluated at room temperature as well as at 110 K. EPR and photoluminescence (PL) studies revealed that manganese ions were present in divalent state and the site symmetry around Mn²⁺ ions is distorted tetrahedral. The spin concentration (N), the paramagnetic susceptibility (χ) and the zero-field splitting parameter (D) have been evaluated and discussed. The green emission at 511 nm in ZnAl₂O₄:Mn phosphor is assigned to a transition from the upper ⁴T₁→⁶A₁ ground state of Mn²⁺ ions.     

Synthesis and luminous characteristics of Ba2MgSi2−xAlxO7: 0.1Eu, 0.1Mn phosphor for WLED

The shift of the emission band to longer wavelength (yellow-orange) of the Ba₂MgSi_2−xAl_xO₇: 0.1Eu²⁺ phosphor under the 350-450 nm excitation range has been achieved by adding the codoping element (Mn²⁺) in the host. The single-host silicate phosphor for WLED, Ba₂MgSi_2−xAl_xO₇: 0.1Eu²⁺, 0.1Mn²⁺ was prepared by high-temperature solid-state reaction. It was found experimentally that, its three-color emission peaks are situated at 623, 501 and 438 nm, respectively, under excitation of 350-450 nm irradiation. The emission peaks at 438 and 501 nm originate from the transition 5d to 4f of Eu²⁺ ions that occupy the two Ba²⁺ sites in the crystal of Ba₂MgSi_2−x Al_xO₇, while the 623 nm emission is attributed to the energy transfer from Eu²⁺ ions to Mn²⁺ ions. The white light can be obtained by mixing the three emission colors of blue (438 nm), green (501 nm) and red (623 nm) in the single host. When the concentrations of the Al³⁺, Eu²⁺ and Mn²⁺ ions were 0.4, 0.1 and 0.1 mol, respectively, the sample presented intense white emission. The addition of Al ion to the host leads to a substantial change of intensity ratio between blue and green emissions. White light could be obtained by combining this phosphor with 405 nm light-emitting diodes. The near-ultraviolet GaN-based Ba₂MgSi_1.7 Al_0.3O₇: 0.1Eu²⁺, 0.1Mn²⁺ LED achieves good color rendering of over 85.     

Auger electron/X-ray photoelectron and cathodoluminescent spectroscopic studies of pulsed laser ablated SrAl2O4:Eu,Dy thin films

Auger electron/X-ray photoelectron and cathodoluminescent (CL) spectroscopic studies were conducted on pulsed laser deposited SrAl₂O₄:Eu²⁺,Dy³⁺ thin films and the correlation between the surface chemical reactions and the decrease in the CL intensity was determined. The Auger electron and the CL data were collected simultaneously in a vacuum chamber either maintained at base pressure or backfilled with oxygen gas. The data were collected when the films were irradiated for 14 h with 2 keV electrons. The CL emission peak attributed to the 4f⁶5d¹ → 4f⁷ transitions was observed at ∼521 nm and the CL intensity of the peaks degraded at different rates in different vacuum conditions. X-ray photoelectron spectroscopy (XPS) data collected from degraded films suggest that strontium oxide (SrO) and aliminium oxide (Al₂O₃) were formed on the surface of the film as a result of electron stimulated surface chemical reaction (ESSCR).     

Mn, Cr-co-doped MgAl2O4 phosphors for white LEDs

The Mn-, Cr-doped and Mn, Cr-co-doped MgAl₂O₄ powders have been synthesized via a gel-solid reaction method. Energy transfer from Mn²⁺ to Cr³⁺ has been observed for the first time in the co-doped MgAl₂O₄ phosphors. When excited with blue light with a wavelength of 450 nm at room temperature, both green emission from Mn²⁺ around 520 nm and red emission from Cr³⁺ around 675and 693 nm were generated. Moreover, the color of the emission can be modified by controlling the doping concentrations of Mn²⁺ and Cr³⁺. Therefore, MgAl₂O₄: Mn²⁺, Cr³⁺ could be used as a single-phased phosphor for white LED with a blue LED chip. The energy transfer in terms of Mn²⁺ to Cr³⁺ is determined by means of radiation and reabsorption.     

High luminance of new green emitting phosphor, Mg2SnO4:Mn

Mg₂SnO₄, which has an inverse spinel structure, was adopted as the host material of a new green emitting phosphor. Luminescence properties of the manganese-doped magnesium tin oxide prepared by the solid state reaction were investigated under vacuum ultraviolet (VUV) ray and low-voltage electron excitation. The Mg₂SnO₄:Mn phosphor exhibited green luminescence with the emission spectrum centered at 500 nm due to spin flip transition of the d-orbital electron associated with the Mn²⁺ ion. Optimum Mn concentration of Mg₂SnO₄:Mn under VUV excitation with 147 nm wavelength and electron beam excitation with 800 V excitation voltage are 0.25 and 0.6 mol%, respectively. The emission intensities of Mg₂SnO₄:Mn phosphors under the two excitation sources are higher than those of Zn₂SiO₄:Mn and ZnGa₂O₄:Mn phosphors. At 0.25 mol% of Mn concentration, on the other hand, the decay time is shorter than 10 ms.     

Luminescence and EPR studies of Mn-activated SrAl12O19 phosphor prepared by facile combustion approach

Manganese-activated strontium hexa-aluminate (SrAl₁₂O₁₉) phosphor has been prepared at low temperature (500 °C) and in a very short time (<5 min) by urea combustion route. Powder X-ray diffraction pattern showed the presence of hexagonal SrAl₁₂O₁₉ phase. Scanning electron microscopy (SEM) indicated the presence of several particles with sizes of 200 nm. The luminescence of Mn²⁺ activated SrAl₁₂O₁₉ exhibits a strong green emission peak around 515 nm from the synthesized phosphor particles under excitation (451 nm). The luminescence is assigned to a transition from the upper ⁴T₁→⁶A₁ ground state of Mn²⁺ ions. EPR investigations also indicated the presence of Mn²⁺ ions in the prepared material. From the observed EPR spectrum, the spin-Hamiltonian parameters have been evaluated. The magnitude of the hyperfine splitting (A) constant indicates that there exists a moderately covalent bonding between Mn²⁺ ions and the surrounding ligands. The variation of zero-field splitting parameter (D) with temperature is measured and discussed. The mechanism involved in the generation of a green emission has been explained in detail.     

Degradation of Y2SiO5:Ce phosphor powders

The degradation of the cathodoluminescence (CL) intensity of cerium-doped yttrium silicate (Y₂SiO₅:Ce) phosphor powders was investigated for possible application in low voltage field emission displays (FEDs). Auger electron spectroscopy (AES), X-ray photoelectron spectroscopy (XPS) and CL spectroscopy were used to monitor changes in the surface chemical composition and luminous efficiency of commercially available Y₂SiO₅:Ce phosphor powders. The degradation of the CL intensity for the powders is consistent with a well-known electron-stimulated surface chemical reaction (ESSCR) model. It was shown with XPS and CL that the electron stimulated reaction led to the formation of a luminescent silicon dioxide (SiO₂) layer on the surface of the Y₂SiO₅:Ce phosphor powder. XPS also indicated that the Ce concentration in the surface layer increased during the degradation process and the formation of CeO₂ and CeH₃ were also part of the degradation process. The CL intensity first decreased until about 300 C cm⁻² and then increased due to an extra peak arising at a wavelength of 650 nm.     

BaAl12O19:Mn green emitting nanophosphor for PDP application synthesized by solution combustion method and its Vacuum Ultra-Violet Photoluminescence Characteristics

Nanostructured BaAl₁₂O₁₉:Mn²⁺ phosphor particles of nano-rod morphology with diameter 40-100 nm and length up to 200-600 nm has been synthesized by solution combustion method and its photoluminescence characteristics have been studied by Vacuum Ultra-Violet Photoluminescence spectrometer (VUVPL) under 147 nm excitation. The crystallographic phase purity of BaAl₁₂O₁₉:Mn²⁺ nanostructured phosphor particle synthesized by solution combustion approach is confirmed by X-ray diffraction (XRD). The broadening of XRD diffraction peaks indicates nanocrystalline nature of particles present in powder. The emission spectrum of BaAl₁₂O₁₉:Mn²⁺ nanophosphor on 147 nm excitation consists of a wide green band with a peak at about 515 nm, which is due to a 3d⁵ (⁴T_1g)-3d⁵ (⁶A_1g) transition corresponds of Mn²⁺ ions. It is found that the concentration quenching is obtained when Mn²⁺ content (x) is 0.05 in BaAl₁₂O₁₉:xMn²⁺ nanophosphor on 147 nm excitation. The decay time of 3d⁵ (⁴T_1 g)-3d⁵ (⁶A_1 g) transition of Mn²⁺ ions at 147 nm excitation is about 23 ms for BaAl₁₂O₁₉:Mn²⁺ nanophosphor. This nanostructured green emitting BaAl₁₂O₁₉:Mn²⁺ phosphor can find potential application in Plasma Display Panels (PDPs) and mercury-free fluorescent lamps.     

Low-voltage cathodoluminescence property of Li-doped Gd2−xYxO3:Eu

Cathodoluminescent (CL) spectra of Li-doped Gd_2−xY_xO₃:Eu³⁺ solid-solution (0.0?x?0.8) were investigated at low voltages (300 V-1 kV). The CL intensity is maximum for the composition of x=0.2 and gradually reduces with increasing the amount of substituted Y content. In particular, small (∼100 nm) particles of Li-doped Gd_1.8Y_0.2O₃:Eu³⁺ are obtained by firing the citrate precursors at only 650°C for 18 h. Relative red-emission intensity at 300 V of this phosphor is close to 180% in comparison with that of commercial red phosphor Y₂O₃:Eu³⁺. An increase of firing temperature to 900°C results in 400-600 nm sized spherical particles. At low voltages (300-800 V), the CL emission of 100 nm sized particles is much stronger than that of 400-600 nm sized ones. In contrast, the larger particles exhibit the higher CL emission intensity at high voltages (1-10 kV). Taking into consideration small spherical morphology and effective CL emission, Li-doped Gd_1.8Y_0.2O₃:Eu³⁺ appears to be an efficient phosphor material for low voltage field emission display.     

TSL, OSL and ESR studies in ZnAl2O4:Tb phosphor

ZnAl₂O₄:Tb phosphor was prepared by combustion synthesis. ZnAl₂O₄:Tb exhibits three thermally stimulated luminescence (TSL) peaks around 150, 275 and 350 °C. ZnAl₂O₄:Tb exhibits optically stimulated luminescence (OSL) when stimulated with 470 nm light.Electron spin resonance (ESR) studies were carried out to identify defect centres responsible for TSL peaks observed in ZnAl₂O₄:Tb. Two defect centres are identified in irradiated ZnAl₂O₄:Tb phosphor and these centres are assigned to V and F⁺ centres. V centre appears to correlate with the 150 °C TSL peak, while F⁺ centre could not be associated with the observed TSL peaks.     

The effect of different gas atmospheres on luminescent properties of pulsed laser ablated SrAl2O4:Eu,Dy thinfilms

SrAl₂O₄:Eu²⁺,Dy³⁺ thin films were grown on Si (1 0 0) substrates using the pulsed laser deposition (PLD) technique to investigate the effect of vacuum, oxygen (O₂) and argon (Ar) deposition atmospheres on the structural, morphological, photoluminescence (PL) and cathodoluminescence (CL) properties of the films. The films were ablated using a 248 nm KrF excimer laser. Atomic force microscopy (AFM), scanning electron microscopy (SEM), X-ray diffraction (XRD), energy dispersive X-ray spectroscopy (EDS) and fluorescence spectrophotometry were used to characterize the thin films. Auger electron spectroscopy (AES) combined with CL spectroscopy were employed for the surface characterization and electron-beam induced degradation of the films. Better PL intensities were obtained from the unannealed films prepared in Ar and O₂ atmospheres with respect to those prepared in vacuum. A stable green emission peak at 515 nm, attributed to 4f⁶5d¹→4f⁷ Eu²⁺ transitions were obtained with less intense peaks at 619 nm, which were attributed to transitions in Eu³⁺. After annealing the films prepared in vacuum at 800 °C for 2 h, the intensity of the green emission (520 nm) of the thin film increased considerably. The amorphous thin film was crystalline after the annealing process. The CL intensity increased under prolonged electron bombardment during the removal of C due to electron stimulated surface chemical reactions (ESSCRs) on the surface of the SrAl₂O₄:Eu²⁺, Dy³⁺ thin films. The CL stabilized and stayed constant thereafter.     

Low voltage electron induced cathodoluminescence degradation and surface characterization of Sr3(PO4)2:Tb phosphor

Tb³⁺-doped Sr₃(PO₄)₂ phosphor was prepared by a sol-gel combustion method. A trigonal structure having Sr and O atoms occupying two different lattice sites were obtained. Scanning Auger nanoprobe was used to analyze the morphology of the particles. Photoluminescence (PL) and cathodoluminescence (CL) properties of Sr₃(PO₄)₂:Tb powder phosphors were evaluated and compared. In addition, the CL intensity degradation of Sr₃(PO₄)₂:Tb was evaluated when the powders were irradiated with a beam of electrons in a vacuum chamber maintained at an O₂ pressure of 1 × 10⁻⁶ Torr or a background pressure of 1 × 10⁻⁸ Torr O₂. The surface chemical composition of the degraded powders, analyzed by X-ray photoelectron spectroscopy (XPS), suggests that new compounds (metal oxides) of strontium and phosphorous were formed on the surface. It is most likely that these compounds contributed to the CL intensity degradation of the Sr₃(PO₄)₂:Tb phosphors. The CL properties and possible mechanism by which the new metal oxides were formed on the surface due to a prolonged electron beam irradiation are discussed.     

Luminescence in trivalent rare earth activated Sr4Al2O7 phosphor

In this paper we report the combustion synthesis of trivalent rare-earth (RE³⁺ = Dy, Eu and Ce) activated Sr₄Al₂O₇ phosphor. The prepared phosphors were characterized by the X-ray powder diffraction (XRD) and photoluminescence (PL) techniques. Photoluminescence emission peaks of Sr₄Al₂O₇:Dy³⁺ phosphor at 474 nm and 578 nm in the blue and yellow region of the spectrum. The prepared Eu³⁺ doped phosphors were excited by 395 nm then we found that the characteristics emission of europium ions at 615 nm (⁵D₀?⁷F₂) and 592 nm (⁵D₀?⁷F₁). Photoluminescence (PL) peaks situated at wavelengths of 363 and 378 nm in the UV region under excitation at around 326 nm in the Sr₄Al₂O₇:Ce³⁺ phosphor.     

Energy transfer in LaMgB5O10:Pr,Mn under VUV excitation

Luminescent properties of Pr³⁺ or Mn²⁺ singly doped and Pr³⁺, Mn²⁺ co-doped LaMgB₅O₁₀ are investigated by synchrotron radiation VUV light. When LaMgB₅O₁₀:Pr³⁺ is excited at185 nm, the photon cascade emission between 4f levels of Pr³⁺ is observed. In the excitation spectra of LaMgB₅O₁₀:Mn²⁺ monitoring the 615 nm emission of Mn²⁺, several excitation bands in a spectral range from 330 to 580 nm are recorded, among which the most intense band is centered at 412 nm (⁶A_1g→⁴E_g-⁴A_1g). This band has considerable spectra overlap with the 410 nm emission (¹S₀→¹I₆) of Pr³⁺, which is favorable for energy transfer from Pr³⁺ to Mn²⁺. Such energy transfer is observed in the co-doped sample, converting the violet emission (410 nm) of Pr³⁺ into the red emission (615 nm) of Mn²⁺. The concentration dependence of transfer efficiency is also investigated.     

Luminescence properties of Mn doped Zn2SiO4 phosphor films synthesized by combustion CVD

Zn₂SiO₄:Mn²⁺ phosphor films were successfully prepared by a novel combustion chemical vapor deposition (CCVD) method. In the CCVD process, a flammable solution, containing precursor materials, is atomized and sprayed through a specially designed nozzle and ignited to form a combustion flame. This enables crystallized films to be directly deposited onto a substrate in open-atmosphere with no post deposition heat treatment. SEM images indicated that the film deposited at 1200 °C consisted of densely packed particles with a fine grain size of several 100 nm. Strong Photoluminescence (PL) and cathodoluminescence (CL) intensities were observed with Zn₂SiO₄:Mn²⁺ samples deposited at a substrate temperature of 1200 °C exhibiting the best crystallinity and highest luminescence. The optimum doping level for films deposited using CCVD was found to be ∼4 mol% Mn²⁺ of starting concentration, with a maximum CL luminescence equivalent to 53% of the luminescence measured from a commercial powder phosphor. A relatively fast CL decay with life time about 0.6-0.7 ms was also observed from these films.     

Synthesis and VUV spectral properties of nanoscaled Zn2SiO4:Mn green phosphor

Nanoscaled Zn₂SiO₄:Mn²⁺ green phosphor with regular and uniform morphology was synthesized by hydrothermal method at a low temperature of 140 °C. The structure and morphology of the phosphor was characterized by X-ray diffraction (XRD) and transmission electron microscopy (TEM). The effects of the hydrothermal temperature and the time on the crystallite structure and the vacuum ultraviolet (VUV) photoluminescence (PL) properties were evaluated. The as-synthesized nanoscaled Zn₂SiO₄:Mn²⁺ phosphor exhibited intensive broad emission around 523 nm, which was attributed to the ⁴T₁→⁶A₁ transition of Mn²⁺. The PL intensity increased along with the increasing hydrothermal temperature and time. The heat-treated phosphors exhibited higher PL intensity than the corresponding samples prepared using the conventional solid-state reaction.     

Dual mode emission and harmonic generation in ZnO-CaO-Al2O3: Er nano-composite

Er³⁺ doped ZnO-CaO-Al₂O₃ nano-composite phosphor has been synthesized through combustion method and its emission and harmonic generation properties have been studied. The X-ray diffraction and thermal analysis techniques have been used to prove the dual phase (ZnO and CaO-Al₂O₃) nature of the phosphor. The phosphor has shown up-conversion emission on near-infra-red (976 nm) excitation and down-conversion emission on 355 nm excitation in presence of Er³⁺ and thus behaves as a dual mode phosphor. On excitation with 976 nm diode laser, material shows color tunability (calcination of composite material at different temperatures). Formation of ZnO nanocrystals on heat treatment of as-synthesized sample has shown its characteristic emission at 388 nm and also the energy transfer from ZnO to Er³⁺ ions. The low temperature emission measurements have been carried out and the results have been discussed. Phosphor has shown strong second harmonic generation (SHG) at 532 nm on 1064 nm and at 266 nm on 532 nm excitation.     

Enhanced blue emission and EPR study of LaMgAl11O19:Eu phosphors

Europium doped LaMgAl₁₁O₁₉ phosphor was prepared by the combustion method. The as-prepared and post-treated (1350 °C 10 h 5% H₂+95% N₂) phosphors were investigated by X-ray diffraction (XRD), Fourier transform infrared (FT-IR), scanning electron microscopy (SEM), photoluminescence (PL) and electron paramagnetic resonance (EPR) techniques. XRD patterns show that LaMgAl₁₁O₁₉:Eu phosphors have hexagonal structure. FT-IR spectrum exhibits absorption bands corresponding to the stretching vibration of AlO₄ and AlO₆. Morphological studies reveal that this phosphor has faceted plates of varying sizes and shapes. The as-prepared LaMgAl₁₁O₁₉:Eu phosphor consists of both Eu³⁺ and Eu²⁺ ions. The phosphor exhibits a bright blue emission at 450 nm (4f⁶5d→4f⁷ transition of Eu²⁺). On post-treating the phosphor we are able to enhance the blue emission efficiency by 330%. The process was detected from the evolution of excitation, emission and EPR spectra and the results are discussed.