Comparison of arsenate, chromate and molybdate binding on schwertmannite: Surface adsorption vs anion-exchange

We have synthesized a series of nanocatalysts with different sizes (50-200 nm) for polymerization of 1,3-butadiene (Bd) by immobilizing salicylaldimine cobalt complexes on the mesoporous silica nanoparticles (MSNs). The prepared catalysts have been characterized by infrared (IR) spectra, thermal gravimetric analyses (TGAs), chemical composition analysis, nitrogen adsorption-desorption, scanning electron microscope (SEM), and transmission electron microscope (TEM). The nanocatalysts in combination with methylaluminoxane (MAO) show excellent catalytic efficiency in polymerization of 1,3-butadiene. The results reveal that these nanocatalysts also show higher activity than the homogeneous analog of cobalt complex and the same catalyst on bulky mesoporous silica supporting materials. The yield and the molecular weight of the poly-butadiene product depend on the particle size of the catalyst support. This catalysis process is also a facile way to directly synthesize the polymer/silica composite materials.     

介孔硅材料及其负载型催化剂去除挥发性有机物的最新进展

介孔硅材料由于具有大的比表面积,均一的孔结构和大的孔径,常被用于分离、吸附和催化等领域.本文综述了近年来国内外介孔硅材料及其负载型催化剂去除各类挥发性有机物(VOCs)的研究进展,主要包括烃类、甲醇、甲醛、丙酮、苯、甲苯、萘、乙酸乙酯等.讨论了介孔硅材料的结构对VOCs吸附过程的影响;介绍了不同催化剂消除各类VOCs的催化性能及反应机理,并重点评述了甲苯在不同催化剂上的研究进展.分析结果表明,介孔硅材料的表面环境、孔道结构以及宏观形貌是影响VOCs分子在介孔硅材料上吸附的主要因素;贵金属催化剂的应用需要提高其抗中毒性以及降低成本;过渡金属的研究应着重于研发高活性的负载型过渡金属复合氧化物催化剂.最后对国内外介孔硅材料及其负载型催化剂的发展进行了展望,今后催化剂的设计可以从“氧化硅载体”和“介孔孔道”两个方面展开,这将为设计合适的催化剂处理各类VOCs污染物提供一定参考.     

Effect of the conditions of the matrix carbonization of sucrose on the structure and adsorption properties of mesoporous carbon materials

A study was carried out on the effect of the conditions of the matrix carbonization of sucrose in MCM-48 and SBA-15 silica mesoporous molecular sieves on the structure and adsorption properties of the resultant CMK-1 and CMK-3 mesoporous carbon molecular sieves. CMK-3 was found to be a structurally similar replica of SBA-15. An exact replica is not formed in the case of MCM-48. This failure is attributed to considerable deformation of the matrix during the carbonization process due to the bicontinuous pore system and thinner framework walls. This is probably related to transformation of the carbon material into a low symmetry product upon detemplating of the C/MCM-48 composite (dissolution of the silica). Mesoporous carbon materials were obtained with good adsorption structure features. Translated from Teoreticheskaya i éksperimental'naya Khimiya, Vol. 44, No. 6, pp. 365–370, November–December, 2008.     

Sol–gel synthesis of mesoporous silicas containing albumin and guanidine polymers and its application to the bilirubin adsorption

The organic–inorganic composite materials based on mesoporous silica were synthesized using sol–gel method. The surface area of silicas was modified by bovine serum albumin (BSA) and guanidine polymers: polyacrylate guanidine (PAG) and polymethacrylate guanidine. The mesoporous silicas were characterized by nitrogen adsorption–desorption analysis, Fourier transform infrared spectroscopy, transmission electron microscopy. The obtained materials were used as adsorbents for selective bilirubin removal. It was shown that the structural properties and surface area of modified materials depend on the nature of polymers. Incorporation of polymers in silica gel matrix during sol–gel process leads to the formation of mesoporous structure with high pore diameter and a BET surface area equals to 346 m²/g for SiO₂/BSA and 160 m²/g for SiO₂/PAG. Analysis of adsorption isotherms showed that modification of silica by BSA and guanidine polymers increases its adsorption ability to bilirubin molecules. According to Langmuir model, the maximum bilirubin adsorption capacity was 1.18 mg/g.     

Synthesis and characterization of nanostructural polymer-silica composite: positron annihilation lifetime spectroscopy study

The swelling of poly(TRIM) spherical particles in TEOS is assessed as a potential way for obtaining polymer-silica nanocomposite materials. Silica deposition was achieved by simply stirring of swollen polymer particles in acidic hydrochloric-water solution. This procedure leads to spherical composite particles with dispersed silica gel within the polymer matrix. The resulting material exhibits the same morphology as the initial polymer. Nanocomposite particles are silica rich (about 17 wt.%). Characterization of the nanocomposites was performed using scanning electron microscopy, FT-IR spectroscopy, (29)Si CP MAS NMR spectroscopy and thermogravimetry. Moreover, the use of positron annihilation lifetime spectroscopy PALS to characterize the structural properties of the nanocomposites is presented. This technique gave more realistic pieces of information about the pore structure of the investigated samples in contrast to nitrogen adsorption studies.     

Photografting of polymers onto nanosized silica surface initiated by eosin moieties immobilized onto the surface

The photograft polymerization of various vinyl monomers onto nanosized silica surfaces was investigated. It was initiated by eosin moieties introduced onto the silica surface. The preparation of the silica with eosin moieties was achieved by the reaction of eosin with benzyl chloride groups on the silica surface.These were introduced by the reaction of surface silanol groups with 4‐(chloromethyl)phenyltrimethoxysilane in the presence of t‐butyl ammonium bromide as a phase‐transfer catalyst. The photopolymerization of various vinyl monomers, such as styrene, acrylamide, acrylic acid, and acrylonitrile was successfully initiated by eosin moieties on the silica surface in the presence of ascorbic acid as a reducing agent and by oxygen. The corresponding polymers were grafted from the silica surface. The grafting efficiency (percentage of grafted polymer to total polymer formed) in the photoinitiation system was much larger than that in the radical polymerization initiated by surface radicals; these radicals were formed by the thermal decomposition of azo groups introduced onto the silica surface. It was found that the polymer‐grafted silica gave stable dispersions in good solvents of grafted polymer and the wettability of the surfaces can be easily controlled by grafting of polymers. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 600–606, 2005     

Triconstituent co-assembly to ordered mesostructured polymer-silica and carbon-silica nanocomposites and large-pore mesoporous carbons with high surface areas

Highly ordered mesoporous polymer-silica and carbon-silica nanocomposites with interpenetrating networks have been successfully synthesized by the evaporation-induced triconstituent co-assembly method, wherein soluble resol polymer is used as an organic precursor, prehydrolyzed TEOS is used as an inorganic precursor, and triblock copolymer F127 is used as a template. It is proposed for the first time that ordered mesoporous nanocomposites have "reinforced concrete"-structured frameworks. By adjusting the initial mass ratios of TEOS to resol, we determined the obtained nanocomposites possess continuous composition with the ratios ranging from zero to infinity for the two constituents that are "homogeneously" dispersed inside the pore walls. The presence of silicates in nanocomposites dramatically inhibits framework shrinkage during the calcination, resulting in highly ordered large-pore mesoporous carbon-silica nanocomposites. Combustion in air or etching in HF solution can remove carbon or silica from the carbon-silica nanocomposites and yield ordered mesoporous pure silica or carbon frameworks. The process generates plenty of small pores in carbon or/and silica pore walls. Ordered mesoporous carbons can then be obtained with large pore sizes of approximately 6.7 nm, pore volumes of approximately 2.0 cm(3)/g, and high surface areas of approximately 2470 m(2)/g. The pore structures and textures can be controlled by varying the sizes and polymerization degrees of two constituent precursors. Accordingly, by simply tuning the aging time of TEOS, ordered mesoporous carbons with evident bimodal pores at 2.6 and 5.8 nm can be synthesized.     

温敏性介孔复合材料PNIPAAm/SBA-15的制备与表征

采用自由基引发原位聚合(in situ polymerization)的方法合成了温敏性聚N-异丙基丙烯酰胺(PNIPAAm)/介孔分子筛SBA-15纳米复合物. 用FT-IR、XRD、TEM、低温N₂吸附-脱附、TG和DSC等手段对复合物进行了表征, 结果表明, 单体N-异丙基丙烯酰胺(NIPAAm)在介孔孔内发生了原位聚合, 聚合物PNIPAAm比较均匀地附于孔壁, 含量达24%左右. 这一聚合和孔内填充没有破坏SBA-15的有序六方结构, 但使样品的表面积、孔径、孔容减小. 同时, 这一有机-无机纳米复合物仍然保持PNIPAAm的温度响应性, 最低临界溶解温度(LCST)与纯PNIPAAm相似.     

Protein adsorption on polymer-modified silica particle surface

Silicon substrate surface and silica particle surface were modified with five kinds of polymers, poly(2-methoxyethyl methacrylate) (pMEMA), poly(2-hydroxyethyl methacrylate) (pHEMA), poly(acrylamide) (pAAm), poly(methyl methacrylate) (pMMA), and poly(styrene) (pSt), using a combined polymerization of surface-initiated polymerization that gives dense polymer chain layers and atom transfer radical polymerization (ATRP) that yields polymers with a narrow molecular weight distribution. Measurements of water contact angle and polymer chain amount on the modified silicon substrate surface and adsorption amounts of proteins (albumin and fibrinogen) on the modified silica particle surface revealed that the amount of polymer on the modified surface greatly affects the suppression of protein adsorption on the surface.     

Single-chain nanoparticle catalyzed polymerization toward composite nanoparticles

Single-chain nanoparticles (SCNPs) as a confined space are promising to synthesize structured nanoparticles. We report a facile synthesis of SCNP colloidal initiators by loading reducing agents during the formation of the SCNPs and the application in redox free radical polymerization to achieve composite nanoparticles with tunable compositions and microstructures. The SCNP initiators could be large-scale achieved by electrostatic-mediated intramolecular crosslinking polymers by metallic complexation with protonated PVP at ambient temperature. The catalytic polymerization occurs inwardly under facile conditions to large scale fabricate composite nanoparticles with tunable microstructures from core-shell to tadpole-shapes. The facile approach could be extended to derive functional composite nanoparticles by loading desired materials such as paramagnetic Fe₃O₄, catalytic Pt, and enzymes.     

“Clickable” polymers via a combination of RAFT polymerization and isocyanate chemistry

We describe a facile, one‐pot, two‐step polymerization towards synthesizing block co‐polymers bearing reactive isocyanate functional groups. Reversible addition fragmentation chain transfer (RAFT) polymerization is used to mediate the co‐polymerization of isocyanate‐bearing monomers dimethyl meta‐isopropenyl benzyl isocyanate (TMI) and 2‐isocyanatoethyl methacrylate (ICEMA) with styrene and methyl methacrylate (MMA), respectively. ICEMA was incorporated into the polymer at a faster rate than TMI and its unhindered isocyanate group was found to be more reactive than the hindered isocyanate group of TMI. Both the TMI/styrene and the MMA/ICEMA systems maintain the reactivity of the isocyanate functionality, which was exploited by attaching representative hydroxyl‐bearing small and large molecules as well as solid substrates to the block co‐polymers. Thus, we demonstrate the versatility of the block co‐polymer system as a basis for forming branched polymers or as grafts for a solid substrate. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

新型HPW/SiO2复合介孔材料的合成与表征

合成了一种新型的HPW/SiO2复合介孔材料,通过XRD,TEM,UV-Vis和FTIR等表征证明,HPW均匀且稳定地包藏到介孔材料由SiO2网络组成的孔壁之中.催化结果表明,其在大分子催化反应中有较高的活性,在酯化反应中连续循环使用未发现活性组分流失,表明其在多相催化和大分子催化反应中有较好的工业应用前景.     

Time-resolved small-angle X-ray scattering studies of polymer-silica nanocomposite particles: initial formation and subsequent silica redistribution

Small angle X-ray scattering (SAXS) is a powerful characterization technique for the analysis of polymer-silica nanocomposite particles due to their relatively narrow particle size distributions and high electron density contrast between the polymer core and the silica shell. Time-resolved SAXS is used to follow the kinetics of both nanocomposite particle formation (via silica nanoparticle adsorption onto sterically stabilized poly(2-vinylpyridine) (P2VP) latex in dilute aqueous solution) and also the spontaneous redistribution of silica that occurs when such P2VP-silica nanocomposite particles are challenged by the addition of sterically stabilized P2VP latex. Silica adsorption is complete within a few seconds at 20 °C and the rate of adsorption strongly dependent on the extent of silica surface coverage. Similar very short time scales for silica redistribution are consistent with facile silica exchange occurring as a result of rapid interparticle collisions due to Brownian motion; this interpretation is consistent with a zeroth-order Smoluchowski-type calculation.     

Free-radical polymerization of monomer-polymer solutions initiated by a peroxide-tertiary aromatic amine system

The free-radical polymerization of styrene and methyl methacrylate initiated by the peroxide-tertiary aromatic amine system in the presence of dissolved aromatic polyethers and fluoroelastomer has been studied with the use of quantitative chemical, thermometric, and gravimetric analyses. It has been shown that the rate of polymerization of monomer-polymer solutions is higher than that of pure monomers. The influence of the content of dissolved polymers on the conversion of monomers corresponding to the onset of the gel effect has been estimated. In the presence of the polymer being added, this phenomenon manifests itself at a lower fractional conversion of the monomer. The greater the content of the polymer and the higher the viscosity of the reaction system, the sooner the rise in the rate of polymerization. The experimental evidence of this study makes it possible to control the synthesis of composite materials from monomer-polymer systems.     

有序介孔二氧化硅/聚苯胺复合物

本文综述了有序介孔二氧化硅/聚苯胺复合物从出现至今的10余年里的研究进展,介绍了复合物的合成方法,包括气相法、液相法和一步合成法,以及模板剂单体原位合成法等。引入苯胺单体后在孔道内聚合生成聚苯胺,即聚苯胺与有序介孔二氧化硅形成了复合物。该复合物的结构和形貌,以及孔道中聚苯胺的结构形态和电学性质,与本体聚苯胺相比具有显著的变化。这种以有序介孔二氧化硅为模板制备的聚苯胺的单分子导线,有潜力应用在新型的电子或光电子器件上。此外,该复合物因为其独特性质很可能在燃料电池的聚合物电解质膜、湿度传感器、电流变材料以及电化学电容器等方面得到应用。     

中空介孔二氧化硅锚固聚偕胺肟吸附Cr(Ⅵ)

以硝酸铈铵为引发剂,在自制的中空介孔二氧化硅(HMS)的空腔和通道内引发丙烯腈自由基聚合,并将其氰基偕胺肟化,用于制备具有吸附Cr(Ⅵ)的廉价有机无机复合吸附材料——中空介孔二氧化硅锚固聚偕胺肟.通过傅里叶变换红外光谱(FTIR)、扫描电子显微镜(SEM)及N_2吸附-脱附比表面分析对中空介孔二氧化硅锚固聚偕胺肟进行表征.结果表明,制备的中空微球直径约为400 nm,其壁上孔径约为11.0 nm,比表面积约为431 m~2/g,锚固聚偕胺肟后中空微球壁上孔道直径约为4.6 nm,比表面积降低为347 m~2/g.HMS锚固的聚偕胺肟对重铬酸钾溶液中铬的吸附量高达0.46 mmol/g,吸附过程中伴随化学反应,符合伪二级动力学模型,可用作废水处理中重金属离子的高效廉价吸附材料.     

Preparation of poly (styrene-methyl methacrylate)/SiO2 composite nanoparticles via emulsion polymerization. An investigation into the compatiblization

Inorganic/organic nanocomposite systems, in which inorganic particles are encapsulated into the polymer matrix, are new classes of polymeric materials. These materials combine the properties of both components. It means that polymer component with excellent optical property, flexibility and toughness could improve the brittleness of inorganic particles and besides, inorganic particles could increase the strength and modulus of polymers. There are various methods to make these inorganic/organic nanocomposites. One of them is the chemical process, in which polymerization is performed directly in the presence of the inorganic particles. Examples of miniemulsion, suspension or dispersion polymerization can be found in the literature but emulsion polymerization is by far the technique most frequently used.In this work, latex containing nanostructure hybrid of copolymer (styrene, methyl methacrylate, acrylic acid) and inorganic nanoparticles (silica) with core/shell structure was prepared via semi-batch emulsion polymerization. At first, silica nanoparticles were dispersed in water phase in an ultrasound bath to prevent the aggregation of nanoparticles, and then emulsion polymerization was performed in the presence of silica nanoparticles. Related tests and analysis confirmed the success in synthesis of nanostructure hybrids. Induced coupled plasma (ICP) analysis and thermal gravimetric analysis (TGA) showed the presence and amount of silica nanoparticles in the final latex. Dynamic light scattering (DLS) analysis confirmed the presence of 25-35 nm particles in the system and transmission electron microscopy (TEM) showed the core/shell morphology of nanoparticles. It has been shown that with an appropriate surfactant, adjusting the pH of media, using suitable monomers and under controlled conditions, it would be possible to produce stable organic/inorganic composite nanoparticles with core/shell structure. In another attempt and in order to investigate the effect of compatiblizing system, styrene-methyl methacrylate was copolymerized in the presence of modified silica particles with oleic acid as the inorganic dispersed phase at the same condition. Similar characterizations were performed in order to have a worthwhile comparison. The results for the late procedure show the effect of oleic acid in formation of aggregates as the core for polymeric nanocomposite particles.     

Optically Active Helical Vinylterphenyl Polymers: Chiral Teleinduction in Radical Polymerization and Tunable Stereomutation

Helical vinyl aromatic polymers are emerging as interesting chiral materials due to their dynamic tailorability, synthetic simplicity, and outstanding chemical and physical stabilities. This Personal Account discusses long‐range chirality transfer in the radical polymerization of vinylterphenyl monomers and tunable stereomutation of the resultant polymers. It begins with a general introduction to the design, synthesis, and characterization of helical poly{(+)‐2,5‐bis[4′‐((S)‐2‐methylbutyloxy)phenyl]styrene}, the first one of this series of polymers. Then, long‐range chirality transfer during radical polymerization of terphenyl‐based vinyl monomers is explained. After that, the chiroptical property control of the resultant polymers by means of the transition from kinetically controlled conformation to thermodynamically controlled conformation and external stimulus is described. This Personal Account concludes by discussing the advantages and disadvantages of the strategy of using vinylterphenyls to obtain optically active helical polymers and providing a short outlook, especially emphasizing the importance of tacticity on the chiroptical properties of polymers.     

Molecular simulation of RMM: ordered mesoporous SBA-15 type material having microporous ZSM-5 walls

SBA-15 is a novel porous material with uniform size mesopores arranged in a regular pattern. The adjacent mesopores are connected to each other by microporous walls. The major disadvantages of these materials are that the walls are amorphous and have low thermal, hydrothermal, and mechanical stability. Recently, there have been a few attempts to either coat the walls of SBA-15 by microporous crystalline zeolites or to fabricate SBA-15 using CMK-3 in such a way that the walls are made up of ZSM-5. The present work provides a first-ever study of RMM (replicated mesoporous materials, which are SBA-15 like ordered mesoporous materials with walls made up of ZSM-5) using molecular modeling. A random orientation of the unit cells and the distribution of sizes of the supercells located at nucleation sites would be ideal to model the RMM. However, such a study would introduce more uncertainties with regard to voids between the individual supercells, noncrystalline silica, and the location of active sites where the nucleation occurs. In a simpler model studied in the present work, the walls of SBA-15 were made up of regularly arranged ZSM-5 having the same orientation. The structure was characterized by estimating the nitrogen accessible area/volume by Connolly surfaces, small-angle and wide-angle X-ray diffraction patterns, methane adsorption, and ice as a probe to study the pore structure. It was found that RMMs have significantly higher methane adsorption capacity compared to SBA-15 and the majority of methane is adsorbed in the microporous walls of RMM. Further research in the field of RMM is needed to obtain the details of zeolitic wall structure.     

Thermal behaviour of poly(dimethylsiloxane) hybrid silicas prepared by radiation grafting

This paper reports our investigation regarding the thermal properties of new polymer-silica hybrid materials obtained by radiation grafting. The polymer poly(dimethylsiloxane),bis(3-aminopropyl)terminated is γ-grafted on a silica gel surface. The thermal behaviour of γ-grafted hybrid materials reveals remarkable differences compared to the thermal behaviour of physically adsorbed polymers. These differences allow us to assess the ability of γ-rays to produce a polymer chemically bonded on a silica surface. The chemical bonds formed by irradiation give to the polymer a high conformational stability confirmed by DTA analysis.