Atomic and electronic structures and stability of icosahedral nanodiamonds and onions

The relative stability of alternative carbon nanoparticles with icosahedral symmetry, such as diamond-like nanocrystallites and multiwalled fullerenes (onions), is investigated using the parametric model and the density functional tight-binding (DFTB) method. It is demonstrated that an increase in the size of particles and their hydrogenation favor the stabilization of diamond-like nanocrystallites. The formation of “intermediate” nanostructures consisting of diamond-like nanocrystallites inside the fullerene cage is revealed. The electronic spectra of icosahedral carbon nanoparticles are calculated.     

星载测量通信系统模拟器设计与实现

为了在地面对星载测量通信系统之间互联互通性能进行测试评估,设计了一种可替代星载测量通信系统的地面模拟器,该模拟器由收发信机,时频单元,信道仿真器以及管理控制计算机构成,收发信机采用双FPGA架构设计,支持星间信号的收发处理,在功能性能指标方面与星载设备具有良好的一致性,信道仿真器能够实现信号传输延时、多普勒以及衰落特性的实时仿真,可显著增强试验场景的真实性以及评估结论的可信性。互联互通试验过程表明,该模拟器功能齐全、性能可靠、操控简单并且易于搬运,试验结果有效验证了星间互联互通方案的可行性。     

混合表面活性剂-铬天青S与铜显色反应研究及应用

在曲拉通X-100(TritonX-100)和乳化剂(OP)存在下,基于Cu2+-铬天青S(CAS)的显色反应,建立了分光光度法测定微量铜的新方法.通过Cu2+与CAS-Triton X-100-OP形成灵敏度较高的多元配合物,来测量铜含量.络合物的最大吸收波长为618nm,表观摩尔吸光系数为ε=6.62×105L·m...     

MgO和Cu的弹性常数随温度及压强变化关系的研究

从Anderson-Grüneisen参数定义式和热膨胀系数定义式出发，根据Tallon的普遍化理论,推导出了一个用于计算弹性常数的理论模型,用所得到的理论模型分别计算了MgO和Cu两种固体材料的弹性常数 、 和 随压强以及温度变化的理论数值，并将理论计算结果与Kumar模型计算结果以及相关实验数据进行了比较，对所得到的理论模型计算结果与Kumar模型计算结果之间的差异性进行了分析和探讨。研究结果表明：所推导的理论模型计算结果与实验数据更加符合，并且由于所用的推导方法不依赖于晶体的结构,因此该模型具有更好的合理性和普适性。     

MgO和Cu的弹性常数随温度及压强变化关系的研究

从Anderson-Grüneisen参数定义式和热膨胀系数定义式出发,根据Tallon的普遍化理论,推导出了一个用于计算弹性常数的理论模型,用所得到的理论模型分别计算了MgO和Cu两种固体材料的弹性常数 、 和 随压强以及温度变化的理论数值,并将理论计算结果与Kumar模型计算结果以及相关实验数据进行了比较,对所得到的理论模型计算结果与Kumar模型计算结果之间的差异性进行了分析和探讨。研究结果表明：所推导的理论模型计算结果与实验数据更加符合,并且由于所用的推导方法不依赖于晶体的结构,因此该模型具有更好的合理性和普适性。     

MgO和Cu的弹性常数随温度及压强变化关系的研究

从Anderson-Grüneisen参数定义式和热膨胀系数定义式出发,根据Tallon的普遍化理论,推导出了一个用于计算弹性常数的理论模型,用所得到的理论模型分别计算了MgO和Cu两种固体材料的弹性常数C_(11)、C_(12)和C_(44)随压强以及温度变化的理论数值,并将理论计算结果与Kumar模型计算结果以及相关实验数据进行了比较,对所得到的理论模型计算结果与Kumar模型计算结果之间的差异性进行了分析和探讨.研究结果表明:所推导的理论模型计算结果与实验数据更加符合,并且由于所用的推导方法不依赖于晶体的结构,因此该模型具有更好的合理性和普适性.     

Breakdown and fusion of vortex loops and dynamics of vortex tangle

The role of the processes of reconnection of vortex filaments in the structure and dynamics of vortex tangle in turbulent HeII has been studied. The evolution of a network of vortex loops has been investigated on the basis of the “kinetic” equation for the distribution function of the number of loops in the space of their lengths. The vortex tangle properties are discussed on the basis of the exact solution obtained for this equation.     

黄芩素的分离纯化与结构表征

以聚酰胺为柱层析吸附剂,以乙醇-氯仿混合溶剂梯度洗脱,从中药黄芩的甲醇提取液中分离出有效成分黄芩素的粗品。 通过对有效成分进行重结晶等纯化处理,得到了一种黄色短棱柱晶状产物。 利用红外光谱(FTIR)、紫外-可见光谱(UV-Vis)、质谱(MS)、氢谱(1H-NMR)及碳谱(13C-NMR)等分析测试手段,对产物的组成和结构进行了表征。 红外光谱测定结果表明,产物的结构中含有共轭芳香体系和单取代苯;紫外-可见光谱和质谱表明,产物为黄酮而非黄酮苷化合物,A环上含有三个酚羟基, B环无羟基和其他基团取代;核磁共振氢谱及碳谱表明,产物的结构中含15个碳原子, 三组羟基质子。 同时,文章还对所有1H-NMR和13C-NMR信号进行了归属,对FTIR光谱特征吸收峰所对应的官能团及其振动形式进行了指认,给出了化合物及碎片离子在质谱中的裂解方式,最终将黄色短棱柱晶状产物鉴定为5,6,7-三羟基黄酮,即黄芩素,分子式为C₁₅H₁₀O₅。     

MCNP-FISPACT耦合燃耗计算程序开发与测试

反应堆堆芯的燃耗计算关系到堆芯的燃料管理,并直接影响堆芯的经济性评估,因此如何快速且准确地对堆芯进行燃耗计算一直是反应堆物理设计的研究重点之一。随着反应堆的发展,其几何结构和物理特性日渐复杂,现有的一维、二维耦合燃耗程序因其在几何处理上的限制,难以满足先进反应堆精细设计分析的要求。为对复杂反应堆堆芯的燃耗情况进行计算,结合粒子输运程序MCNP 处理复杂几何和燃耗程序FISPACT处理核素全面的特点,开发了接口程序耦合MCNP 和FISPACT来进行燃耗计算,并对耦合程序进行了计算验证。采用了IAEA 基准校核例题和CFETR中国聚变工程实验堆例题进行程序验证,经计算得出的有效倍增因子随燃耗的变化曲线和TBR等数据与标准例题的结果符合良好,其误差在可接受范围内。     

Synthesis and characterizations of hollow spheres and nanospheres of Au

Hollow spheres and nanospheres of Au have been prepared by a simple reaction of HAuCl₄·4H₂O, NaOH and (NH₂OH)₂·H₂SO₄ in the presence of gelatin. The role of gelatin and the effect of the temperature of the reaction in producing the spherical particles of Au are discussed. The products were characterized by powder X-ray diffraction (XRD), transmission electron microscopy and UV–Vis absorption spectroscopy. The sizes of the nanospheres of Au were estimated by the Debye–Scherrer formula according to the XRD spectrum. PACS  81.05.Bx; 81.05.Rm; 81.07.-b; 81.16.Be; 81.20.Fw     

黑克、布劳、及伯曼-温采尔代数的诱导及分导系数和量子经典李代数的耦合与重新耦合系数

本文总结了计算黑克、布劳、及伯曼 温采尔代数在各种工数链下诱导及分导系数的线性方程方法(LEM)。特别强调了关于A,B,C,D型李代数及其量子情形与其中心代数之间的舒尔 魏尔 布劳双关性关系。这一关系使我们能够利用相应中心代数的诱导及分导系数计算出经典李代数及其量子情形的耦合与重新耦合系数。讨论了从该方法得到B,C,D型李代数不可约表示克罗内克积分解的应用。基于LEM还得到了处理对应于置换群CG系列问题的黑克代数张量积的方法。     

The structure and properties of the stepped surfaces of MgO and NiO

The static lattice computer simulation method has been used to study the structure and properties of high index faces of MgO and NiO. The (10_n) series of faces can be considered as stepped (001) surfaces and have been studied for both materials. In addition, the (403) and (302) faces which can be considered as stepped (101) surfaces have been studied for NiO. The calculated energies for steps on the (001) face are 3.72×10^?10 and 3.62×10^?10 J m^?1 for MgO and NiO respectively. The NiO energy also requires correction for the crystal field splitting. The energy of steps on the (101) surface is at least an order of magnitude lower. The interaction between the steps is repulsive but of short range. The large variation of surface energy with angle indicates that torque terms cannot be neglected in the analysis of thermal grooving experiments. The step structure is modified by substantial ionic displacements leading to an obtuse step angle. The structure is qualitatively similar for both NiO and MgO. The large distortions are likely to modify the step properties from those deduced by consideration of only the ideal geometry.     

Control of peaks of terahertz radiation and tuning of its frequency and intensity

We propose to employ dark hollow laser beams (DHBs) for obtaining multifocal terahertz (THz) radiations which are quite useful in medical applications. The number of peaks in the THz field can be suppressed if we apply external magnetic field and use intense lasers so that the relativistic effects are prominent. It means we can achieve strong bifocal THz radiation with this scheme. However, multifocal THz radiation can be reconstituted by increasing the beating frequency of the lasers. The separation of the peaks can be controlled by wisely choosing the orders of the lasers, and also by varying the strength of the magnetic field. The magnetic field is found to enhance the THz field, and also it tunes the frequency of the THz field. The DHBs of higher and equal orders are found to be most significant for efficient THz radiation generation with respect to the role of the magnetic field and density ripples.     

酸碱染料离子的缔合及等色化

本文阐述了等色染料离子对形成的实验方法,等色染料离子对的缔全机理及其形式,用吸收光谱的能级图,从电子理论角度论述了等色染料离子对的缔合效应等色化,溶剂效应等以化机理。列表示出等色染料离子对的高灵敏度,从而证明了等色染料离子对的萃取光度,浮选光度及萃取荧光光度法是高灵敏度和超灵敏度的新体系,为金属痕量和超痕量分析开辟了更为宽广的前景。     

Regularities of heat- and mass transfer and evaporation of activators of thermoemissive cathodes

The problem of heat- and mass transfer and evaporation of emission-activating elements of refractory rod cathodes is formulated and solved in the 2D approximation with nonlinear boundary conditions. Time-dependent heat conduction equations, current continuity equations, as well as the diffusion equations and equations describing evaporation of activators are formulated simultaneously and solved numerically taking into account the temperature dependence of the electrode material. The thermal state of cathode assemblies depending on extrinsic parameters of plasma units is analyzed. The results of simulation of the thermal state and heat- and mass transfer in cathode assemblies with different geometries are considered.     

Some problems of analysis and optimization of plates and shells

The classical optimization problems of plates and shells to satisfy a priori given geometry and dynamical characteristics are considered. Orthotropic plates and shells with variable thickness and low transverse stiffness are analyzed. First, some useful theorems and their proofs are given. Then the finite approximation of the problem related to optimization of free vibrations of shells with transverse deformation and rotary inertia is discussed. The varational iteration (MVI) and Bubnov-Galerkin (MB) methods are applied, and their convergence and suitability for application to plates and shells analysis are discussed and numerically evaluated.     

Superpositions of expansions and contractions and the p-reducibility of fermion operators

Two theorems are proved. The first concerns superpositions of expansion and contraction mappings on the set of fermion operators with finite 1-rank. The second theorem deals with the problem of p-reducibility of these operators.     

TG and DSC studies of natural and artificial aging of polypropylene

We study the evolution of thermal degradation of samples of polypropylene (PP), during their aging for two periods of 60 and 80 days. The study, using thermogravimetric analysis (TG) and differential scanning calorimetric (DSC) analyses, focused on two types of aging: the natural one under the impact of the solar environment and the artificial one which was carried out by exposing the sample to radiations of a 100 W commercial lamp.The comparative study of these two types of aging shows that the thermal degradation of the PP increases as a function of time of aging. Indeed, for a same duration, this thermal degradation is more important in the artificial aging case than it is in the natural one and is an increasing function of aging. The prolonged and continuous thermal effect produced by the lamp, in the case of the artificial aging, weakened the polymer and implies very important acceleration of the process of degradation.The results obtained during heating and cooling of the samples, using the DSC, show an evolution of the phase transition temperatures and the corresponding enthalpies of melting and crystallization.     

Glass transition and intermixing of amorphous water and methanol

The diffusion of molecules in amorphous water and methanol films has been investigated on the basis of time-of-flight secondary ion mass spectrometry as a function of temperature. The glass-liquid transition of the amorphous water film occurs at 130-145 K as confirmed from the surface segregation of embedded methanol molecules. The morphology of the pure amorphous water film changes drastically at 160 K as a consequence of dewetting induced by the surface tension and the strongly decreased viscosity of the film. The morphology of the amorphous methanol film changes at 115 K following the self-diffusion onset at 80 K. The binary films of water and heavy methanol are intermixed completely at 136 K as evidenced by the occurrence of the H/D exchange.     

Effect of voids and pressure on melting of nano-particulate and bulk aluminum

Molecular dynamics simulations are performed using isobaric–isoenthalpic (NPH) ensembles to study the effect of internal defects in the form of voids on the melting of bulk and nano-particulate aluminum in the size range of 2–9 nm. The main objectives are to determine the critical interfacial area required to overcome the free energy barrier for the thermodynamic phase transition, and to explore the underlying mechanisms for defect-nucleated melting. The inter-atomic interactions are captured using the Glue potential, which has been validated against the melting temperature and elastic constants for bulk aluminum. A combination of structural and thermodynamic parameters, such as the potential energy, Lindemann index, translational-order parameter, and radial-distribution functions, are employed to characterize the melting process. The study considers a variety of void shapes and sizes, and results are compared with perfect crystals. For nano aluminum particles smaller than 9 nm, the melting temperature is size dependent. The presence of voids does not impact the melting properties due to the dominancy of nucleation at the surface, unless the void size exceeds a critical value beyond which lattice collapse occurs. The critical void size depends on the particle dimension. The effect of pressure on the particulate melting is found to be insignificant in the range of 1–300 atm. The melting behavior of bulk aluminum is also examined as a benchmark. The critical interfacial area required for the solid–liquid phase transition is obtained as a function of the number of atoms considered in the simulation. Imperfections such as voids reduce the melting point. The ratio between the structural and thermodynamic melting points is 1.32. This value is comparable to the ratio of 1.23 for metals like copper.