SWIP-RFP装置反场箍缩位形研究

SWIP-RFP装置是具有金属真空室的环形反场箍缩(RFP)装置.在初始气压,初始环场,可控辅助反场和等离子体自反效应的不同情况下,做了反场建立条件的实验。在有自反效应和可控辅助反场时间配合的三种运行情况下,反场箍缩放电已实现.本文给出了反场箍缩位形实验观测的结果,实验测出反场箍缩位形的等离子体电流幅值。脉冲长度与相关因素的依赖关系.实验结果表明在无功率短路情况下,等离子体存在时间τ_p≥0.3ms。     

沿极小势能轨迹从q〉1至q〈1位形演变

本文给出了沿极小势能轨迹从类托卡马克至反场箍缩(RFP)的演变。在反场箍缩条件下可允许用强等离子体电流充分加热等离子体到点火温度,而不需要辅助的中性束或射频加热系统。     

SWIP—PFP装置反场箍缩位形研究

ＳＷＩＰ－ＲＦＰ装置是具有金属真空室的环形反场箍缩（ＲＦＰ）装置。在初始气压，初始环场，可控辅助反场和等离子体自反效应的不同情况下，做了反场建立条件的实验。在有自反效应和可控辅助反场时间配合的三种运动情况下，反场箍缩放电已实现。本文给出了反场箍缩位形实验预测的结果，实验测出反场箍缩位形的等离子体电幅值，脉冲长度与相关因素的依赖关系。实验结果表明在无功率短路情况下，等离子体存在时间τｐ≥０．３ｍｓ。     

完全稳定化MRT的可能性及应用于聚变的潜力

提出采用方向时变(旋转)的驱动磁场(交替Θ-Z箍缩构型)或者多级嵌套Θ-Z箍缩构型来抑制动态Z箍缩的MRT不稳定性的概念,介绍了对交替/嵌套Θ-Z箍缩MRT不稳定性的最新研究进展,结果表明适当优化的交替/嵌套Θ-Z箍缩的MRT不稳定性明显远低于标准Θ箍缩或者Z箍缩的,一定厚度时甚至被完全致稳,这表明交替/嵌套Θ-Z箍缩构型具有潜力应用于Θ-Z箍缩套筒惯性聚变。     

X箍缩三维数值模拟

利用FOI-PERFECT程序对X箍缩进行了3D数值模拟研究,给出了X箍缩的物理图像和动力学过程,探讨了Z箍缩中出现磁重联的可能性,并指出如果双丝Z箍缩中能够出现磁重联,那么X箍缩是更有利于磁重联出现的位形,并且,X箍缩中出现多重X射线暴的一个可能原因是z轴上多个位置出现磁重联。     

箍缩背光照相

 利用PPG-Ⅰ脉冲功率装置（500 kV,400 kA,100 ns）驱动X箍缩负载,得到了μm量级的亚纳秒脉冲X射线辐射点源。在阴阳极轴线和回流柱上同时安装X箍缩负载,前者可作为背光照相的X射线点源;后者可作为被拍照的目标X箍缩。获得了X箍缩发展过程不同时刻的时间序列图像,在背光照相的图像中可以清晰观察到X箍缩交叉点处等离子体的外爆、箍缩以及最终的崩溃阶段。将阴阳极轴线上的X箍缩负载用Z箍缩丝阵负载代替,实现了对丝阵负载Z箍缩放电起始阶段的X射线背光照相,观察到了最初的各单丝电爆炸、等离子体膨胀及融合过程,同时观察到了双丝Z箍缩发展过程中的等离子体不稳定性。实验结果有助于深入理解Z箍缩发展的物理过程,同时可为有效的模拟建模分析提供基本的实验数据。     

快Z箍缩物理过程的PSPICE电路模拟方法分析

 简单介绍了快Z箍缩概念和物理过程，以及Z箍缩物理过程不稳定性因素和简单分析。用PSPICE电路模拟方法解薄壳模型得到了箍缩时间、等离子体壳的速度、负载上的电流、电压变化规律等Z箍缩物理量。     

环形反场箍缩平衡和稳定

在环形坐标系中,求出了反场箍缩平衡方程的解析解,并验证了Suydam条件和充分稳定性判据。这些数值结果与HBTXI和TPE-IR(M)的实验结果一致。     

X箍缩背光照相

利用PPG-Ⅰ脉冲功率装置(500 kV,400 kA,100 ns)驱动X箍缩负载,得到了μm量级的亚纳秒脉冲X射线辐射点源。在阴阳极轴线和回流柱上同时安装X箍缩负载,前者可作为背光照相的X射线点源;后者可作为被拍照的目标X箍缩。获得了X箍缩发展过程不同时刻的时间序列图像,在背光照相的图像中可以清晰观察到X箍缩交叉点处等离子体的外爆、箍缩以及最终的崩溃阶段。将阴阳极轴线上的X箍缩负载用Z箍缩丝阵负载代替,实现了对丝阵负载Z箍缩放电起始阶段的X射线背光照相,观察到了最初的各单丝电爆炸、等离子体膨胀及融合过程,同时观察到了双丝Z箍缩发展过程中的等离子体不稳定性。实验结果有助于深入理解Z箍缩发展的物理过程,同时可为有效的模拟建模分析提供基本的实验数据。     

“强光一号”加速器短γ二极管径向箍缩率计算方法

电子束流箍缩是强流电子束二极管工作过程中广泛存在的物理现象.束流径向箍缩率定义为靶面形成的束斑(环)面积随时间的变化率,是判断二极管的束流箍缩情况和工作特性的重要指标,目前对其的研究方法以光学诊断和针对特定二极管的理论估算为主.在现有研究的基础上,以"强光一号"强箍缩短g二极管为对象,给出了适用于该"环-板"构型二极管的径向箍缩率理论估算公式,并分别建立了基于粒子模拟和实验测量箍缩中心偏移的箍缩率计算方法,三种方法给出的径向箍缩率值分别为8.43,8.70及7.89 cm~2/ns,三者相对偏差10%.为强流二极管径向箍缩率的研究提供了一种新的思路.     

A Deformation-Theoretical Approach to Weyl Quantization on Riemannian Manifolds

By using a sheaf-theoretical language, we introduce a notion of deformation quantization allowing not only for formal deformation parameters but also for real or complex ones as well. As a model for this approach to deformation quantization, we construct a quantization scheme for cotangent bundles of Riemannian manifolds. Here, we essentially use a complete symbol calculus for pseudodifferential operators on a Riemannian manifold. Depending on a scaling parameter, our quantization scheme corresponds to normally ordered, Weyl or antinormally ordered quantization. Finally, it is shown that our quantization scheme induces a family of pairwise isomorphic strongly closed star products on a cotangent bundle.     

Exact solution of a coagulation equation with a product kernel in the multicomponent case

In this paper, we obtain the general solution for the continuous Smoluchowski equation in the multicomponent case with a product kernel as a series expansion. The solution of the problem involves the Laplace transform in several dimensions. We obtain a nonlinear partial differential equation (PDE) of the advective kind generalizing the one previously given by other authors for the mono-component case.As in its relative mono-component case, gelation is produced at some point, the conditions for its occurrence being the same as those for the mono-component case, though substituting a sum of derivatives by a derivative in the Laplace transform field. We demonstrate that for a multicomponent particle size distribution (PSD) of multiplicative form, it is sufficient for one of the marginal PSDs to generate instantaneous gelation for the occurrence of instantaneous gelation in the multicomponent PSD.The general solution is applied to several specific cases, a discrete case that recovers a previously known solution, and another two continuous cases which can be used to check numerical methods designed to directly solve the Smoluchowski equation in more general cases.We have compared the solutions for the multicomponent PSD for constant, additive and product kernels and we conjecture about the relation existing between the functional forms for the solutions both in the mono-component and the multicomponent case.Finally, we have analysed the shape of the solutions for multicomponent PSD for constant, additive and product kernels for very small masses of components, obtaining a qualitatively different behaviour for the product kernel. This has effects in the mixing state of the sol phase as time passes.     

Modelling of a closed two-dimensional reactor bounded by a wavy wall

In this paper, we propose a model for a two-dimensional closed reactor bounded by a wavy wall. The left, right and top walls of the reactor are assumed to be flat surfaces while the bottom wall is a wavy surface. In order to formulate a model for such a reactor, we introduce a coordinate transformation into the dimensionless equations of a rectangular closed domain. Then the resulting equations illustrate the phenomena for a closed reactor bounded by a wavy wall. We solve these equations using the finite difference method. The astonishing results are that the intensity of streamlines and the maximum temperature within the reactor significantly increase with an increase of the number of waves in the bottom wall, the amplitude of waves and the Frank-Kamenetskii number. Converse characteristics are observed for higher values of the enlargement of a wave. Moreover, larger Rayleigh number induces stronger vortices in the flow field and reduces the maximum temperature. The Nusselt number at the bottom wavy wall is found to increase for higher values of the Frank-Kamenetskii number and the amplitude of a wave. A transition from the steady-state to the oscillatory convection is identified for a certain value of the Frank-Kamenetskii number. However, for a low value of the Rayleigh number, there occurs a transition from the steady-state to an explosion for increasing value of the Frank-Kamenetskii number. Results also demonstrate that the critical value of the Frank-Kamenetskii number, for which a transition from the steady-state to the oscillatory convection occurs, is higher for increasing values of the number of waves, the enlargement of a wave and the amplitude of a wave.     

Structural and Thermodynamic Peculiarities of Core-Shell Particles at Fluid Interfaces from Triangular Lattice Models

A triangular lattice model for pattern formation by core-shell particles at fluid interfaces is introduced and studied for the particle to core diameter ratio equal to 3. Repulsion for overlapping shells and attraction at larger distances due to capillary forces are assumed. Ground states and thermodynamic properties are determined analytically and by Monte Carlo simulations for soft outer- and stiffer inner shells, with different decay rates of the interparticle repulsion. We find that thermodynamic properties are qualitatively the same for slow and for fast decay of the repulsive potential, but the ordered phases are stable for temperature ranges, depending strongly on the shape of the repulsive potential. More importantly, there are two types of patterns formed for fixed chemical potential—one for a slow and another one for a fast decay of the repulsion at small distances. In the first case, two different patterns—for example clusters or stripes—occur with the same probability for some range of the chemical potential. For a fixed concentration, an interface is formed between two ordered phases with the closest concentration, and the surface tension takes the same value for all stable interfaces. In the case of degeneracy, a stable interface cannot be formed for one out of four combinations of the coexisting phases, because of a larger surface tension. Our results show that by tuning the architecture of a thick polymeric shell, many different patterns can be obtained for a sufficiently low temperature.     

Photorefractive Four-Wave Mixing Switches Utilizing Pockels Effect -Longitudinal and Lateral Switches-

We carried out detailed calculations for photorefractive wave-mixing switches based on one of three crystals with high electro-optic coefficients, namely, BaTiO₃, Strontium Barium Niobate (SBN (0.75)), and Potasium Sodium Strontium Barium Niobate (KNSBN). A comparison of results for the three crystals shows that a 0_-cut BaTiO³ crystal is suitable for a longitudinal switch and requires a voltage of about 80 for a 2-mm-thick crystal to induce sufficient phase mismatch. The electrodes must be transparent for the incident and diffracted beams. A 45_-cut SBN (0.75) crystal, however, is suitable for a lateral switch and requires a voltage of about 150 for a 1-mm-wide crystal. The electrodes do not need to be transparent.     

Sound radiation from rectangular baffled and unbaffled plates

The radiation efficiency of a flat rectangular plate is often used as a basis on which to represent the sound radiation from more complex plate-like structures. The solution for a plate set in a rigid baffle is well known, including the radiation efficiency for multi-modal response of the plate. In this case the assumption is usually made that each mode within a given frequency band has equal modal vibration energy. This paper explores a number of limitations of this simple result. First, the extent to which the radiation efficiency for a particular forcing point deviates from the modal-average result is investigated. Second, the difference is shown between the results for a baffled plate and an unbaffled plate. For a multi-modal response, an empirical formula is also presented which allows the radiation efficiency to be estimated for the unbaffled case. Finally, the effect of different boundary conditions on both baffled and unbaffled results is demonstrated by comparing the results for guided boundaries with those for simply supported boundaries.     

用于倾斜入射的波分复用薄膜滤光片的特性及改进

对倾斜入射时窄带薄膜滤光片的特性作了描述 ,由于低折射率间隔层的滤光片 ,倾斜入射时 p偏振分量的通带比s分量更移向短波 ,而高折射率间隔层的滤光片则反之 ,因此可把间隔层同时设计成高、低折射率两种材料 ,或选用适当的中间折射率材料 ,使p分量和s分量两个通带的中心波长重合。设计了用于 2 0°入射角的密集波分复用 (DWDM )滤光片 ,并给出了实验结果。     

Stopping time of a one-dimensional bounded quantum walk

The stopping time of a one-dimensional bounded classical random walk(RW) is defined as the number of steps taken by a random walker to arrive at a fixed boundary for the first time.A quantum walk(QW) is a non-trivial generalization of RW,and has attracted a great deal of interest from researchers working in quantum physics and quantum information.In this paper,we develop a method to calculate the stopping time for a one-dimensional QW.Using our method,we further compare the properties of stopping time for QW and RW.We find that the mean value of the stopping time is the same for both of these problems.However,for short times,the probability for a walker performing a QW to arrive at the boundary is larger than that for a RW.This means that,although the mean stopping time of a quantum and classical walker are the same,the quantum walker has a greater probability of arriving at the boundary earlier than the classical walker.     

Normal modes and quality factors of spherical dielectric resonators: I — shielded dielectric sphere

Electromagnetic theoretic analysis of shielded homogeneous and isotropic dielectric spheres has been made. Characteristic equations for the TE and TM modes have been derived. Dielectric spheres of radii of the order of μm size are found suitable for the optical frequency region whereas for the microwave region radii of the order of mm size are found suitable. Parameters suitable for their application in the optical and microwave frequency ranges have been used to compute the frequencies corresponding to the normal modes for the TE and TM modes. Expressions for the quality factors for realistic resonators, i.e., for a dielectric sphere with a non-zero conductivity and a metal shield with a finite conductivity have also been derived for the TE and TM modes. Computations of the quality factors have been made for resonators with parameters suitable for the optical and the microwave regions.