共查询到20条相似文献,搜索用时 22 毫秒
1.
The interaction between an elliptical crack and a spherical inhomogeneity embedded in a three-dimensional solid subject to uniaxial tension is investigated. Both the inhomogeneity and the solid are isotropic but have different elastic moduli. The Eshelby's equivalent inclusion method is applied together with the principle of superposition. An approximate solution for the stress intensity factor is obtained by an approach that expands the distance between the center of the crack and inhomogeneity in series. The local stress field can be increased or decreased depending on the relative modulus of the spherical inhomogeneity and matrix. If the inhomogeneity modulus is larger than that of the matrix, a reduction in the stress intensity factor prevails. Displayed numerically are results to exhibit the influence of inhomogeneity and its distance to the crack. 相似文献
2.
Shiqun Guo 《Archive of Applied Mechanics (Ingenieur Archiv)》2009,79(8):709-723
This paper is concerned with the elastic wave scattering induced by a penny-shaped interface crack in coated materials. Using
the integral transform, the problem of wave scattering is reduced to a set of singular integral equations in matrix form.
The singular integral equations are solved by the asymptotic analysis and contour integral technique, and the expressions
for the stress and displacement as well as the dynamic stress intensity factors (SIFs) are obtained. Using numerical analysis,
this approach is verified by the finite element method (FEM), and the numerical results agree well with the theoretical results.
For various crack sizes and material combinations, the relations between the SIFs and the incident frequency are analyzed,
and the amplitudes of the crack opening displacements (CODs) are plotted versus incident wavenumber. The investigation provides
a theoretical basis for the dynamic failure analysis and nondestructive evaluation of coated materials. 相似文献
3.
SCATTERING OF ANTI-PLANE SHEAR WAVES BY A SINGLE CRACK IN AN UNBOUNDED TRANSVERSELY ISOTROPIC ELECTRO-MAGNETO-ELASTIC MEDIUM 总被引:1,自引:0,他引:1
A theoretical treatment of the scattering of anti-plane shear (SH) waves is provided by a single crack in an unbounded transversely isotropic electro-magneto-elastic medium. Based on the differential equations of equilibrium, electric displacement and magnetic induction intensity differential equations, the governing equations for SH waves were obtained. By means of a linear transform, the governing equations were reduced to one Helmholtz and two Laplace equations. The Cauchy singular integral equations were gained by making use of Fourier transform and adopting electro-magneto imperme ableboundary conditions. The closed form expression for the resulting stress intensity factor at the crack was achieved by solving the appropriate singular integral equations using Chebyshev polynomial. Typical examples are provided to show the loading frequency upon the local stress fields around the crack tips. The study reveals the importance of the electro-magneto-mechanical coupling terms upon the resulting dynamic stress intensity factor. 相似文献
4.
A theoretical treatment of the scattering of anti-plane shear (SH) waves is provided by a single crack in an unbounded transversely
isotropic electro-magneto-elastic medium. Based on the differential equations of equilibrium, electric displacement and magnetic
induction intensity differential equations, the governing equations for SH waves were obtained. By means of a linear transform,
the governing equations were reduced to one Helmholtz and two Laplace equations. The Cauchy singular integral equations were
gained by making use of Fourier transform and adopting electro-magneto impermeable boundary conditions. The closed form expression
for the resulting stress intensity factor at the crack was achieved by solving the appropriate singular integral equations
using Chebyshev polynomial. Typical examples are provided to show the loading frequency upon the local stress fields around
the crack tips. The study reveals the importance of the electro-magneto-mechanical coupling terms upon the resulting dynamic
stress intensity factor.
Contributed by SHEN Ya-peng
Foundation item: the National Natural Science Foundation of China (10132010, 50135030)
Biographies: DU Jian-ke (1970∼) 相似文献
5.
Shielding effect and emission condition of a screw dislocation near a blunt crack in elliptical inhomogeneity 总被引:1,自引:0,他引:1
The shielding effect and emission condition of a screw dislocation near a blunt crack in elastic elliptical inhomogeneity
is dealt with. Utilizing the Muskhelishvili complex variable method, the explicit series form solutions of the complex potentials
in the matrix and the inclusion regions are derived. The stress intensity factor and critical stress intensity factor for
dislocation emission are also calculated. The influences of the orientation of the dislocation and morphology of the blunt
crack as well as the material elastic dissimilarity upon the shielding effect and emission criterion are discussed in detail.
As a result, numerical analysis and discussion show that the positive screw dislocation can reduce the stress intensity factor
of the crack tip (shielding effect) only when it is located in the certain region. The shielding effect increases with the
increase of the shear modulus of the matrix and the curvature radius of the blunt crack tip, but decreases with the increase
of dislocation azimuth angle. The critical loads at infinity for dislocation emission increases with the increment of the
emission angle and the curvature radius of the blunt crack tip, and the most probable angle for screw dislocation emission
is zero. The present solutions contain previous results as the special cases. 相似文献
6.
The electroelastic interaction between a piezoelectric screw dislocation and an elliptical inhomogeneity containing a confocal blunt crack under infinite longitudinal shear and in-plane electric field is investigated. Using the sectionally holomorphic function theory, Cauchy singular integral, singularity analysis of complex functions and theory of Rieman boundary problem, the explicit series solution of stress field is obtained when the screw dislocation is located in inhomogeneity. The intervention law of the interaction between blunt crack and screw dislocation in inhomogeneity is discussed. The analytical expressions of generalized stress and strain field of inhomogeneity are calculated, while the image force, field intensity factors of blunt crack are also presented. Moreover, a new matrix expression of the energy release rate and generalized strain energy density (SED) are deduced. With the size variation of blunt crack, the results can be reduced to the case of the interaction between a piezoelectric screw dislocation and a line crack in inhomogeneity. Numerical analysis are then conducted to reveal the effects of the dislocation location, the size of inhomogeneity and blunt crack and the applied load on the image force, energy release rate and strain energy density. The influence of dislocation on energy release rate and strain energy density is also revealed. 相似文献
7.
A mathematical formulation is presented for the dynamic stress intensity factor (mode I) of a finite permeable crack subjected to a time-harmonic propagating longitudi-nal wave in an infinite poroelastic solid. In particular, the effect of the wave-induced fluid flow due to the presence of a liquid-saturated crack on the dynamic stress intensity fac-tor is analyzed. Fourier sine and cosine integral transforms in conjunction with Helmholtz potential theory are used to formulate the mixed boundary-value problem as dual inte-gral equations in the frequency domain. The dual integral equations are reduced to a Fredholm integral equation of the second kind. It is found that the stress intensity factor mono-tonically decreases with increasing frequency, decreasing the fastest when the crack width and the slow wave wavelength are of the same order. The characteristic frequency at which the stress intensity factor decays the fastest shifts to higher frequency values when the crack width decreases. 相似文献
8.
The interaction of a general plane P wave and an elastic cylindrical inclusion of infinite length partially debonded from
its surrounding viscoelastic matrix of infinite extension is investigated. The debonded region is modeled as an arc-shaped
interface crack between inclusion and matrix with non-contacting faces. With wave functions expansion and singular integral
equation technique, the interaction problem is reduced to a set of simultaneous singular integral equations of crack dislocation
density function. By analysis of the fundamental solution of the singular integral equation, it is found that dynamic stress
field at the crack tip is oscillatory singular, which is related to the frequency of incident wave. The singular integral
equations are solved numerically, and the crack open displacement and dynamic stress intensity factor are evaluated for various
incident angles and frequencies.
The project supported by the National Natural Science Foundation of China (19872002) and Climbing Foundation of Northern Jiaotong
University 相似文献
9.
运用弹性力学的复势方法,研究了纵向剪切下增强相/夹杂内螺型位错偶极子与含共焦钝裂纹椭圆夹杂的干涉效应,得到了该问题复势函数的封闭形式解答,由此推导出了夹杂区域的应力场、作用在螺型位错偶极子中心的像力和像力偶矩以及裂纹尖端应力强度因子级数形式解。并分析了位错偶极子倾角 、钝裂纹尺寸和材料常数对位错像力、像力偶矩以及应力强度因子的影响。数值计算结果表明:位错像力、像力偶矩以及应力强度因子均随位错偶极子倾角做周期变化;夹杂内部的椭圆钝裂纹明显增强了硬基体对位错的排斥,减弱了软基体对位错的吸引,且对于硬夹杂,位错出现了一个不稳定平衡位置,该平衡位置随钝裂纹曲率的增大不断向界面靠近;变化 值将出现改变位错偶极子对应力强度因子作用方向的临界值。 相似文献
10.
Ralf Müller Petia Dineva Tsviatko Rangelov Dietmar Gross 《Archive of Applied Mechanics (Ingenieur Archiv)》2012,82(1):97-110
The anti-plane dynamic problem of a functionally graded piezoelectric plane containing a hole–crack system is treated by a
non-hypersingular traction-based boundary integral equation method. The material parameters vary exponentially in the same
manner in an arbitrary direction. The system is loaded by an incident SH-type wave, and impermeable boundary conditions are
assumed. Using a frequency-dependent fundamental solution of the wave equation, the boundary value problem is transformed
into a system of integro-differential equations along the boundary of the hole and on the crack line. Its numerical solution
yields the dynamic stress intensity factors and stress concentration factors. A parametric study reveals their dependence
on the hole–crack scenario and its geometry, characteristics of the dynamic load and magnitude and direction of material inhomogeneity. 相似文献
11.
《European Journal of Mechanics - A/Solids》2001,20(3):457-468
The dynamic field intensity factors and energy release rates in a rectangular piezoelectric ceramic medium containing a center crack are obtained for boundary conditions of a permeable and an impermeable crack under electro-mechanical impact loading. An integral transform method is used to reduce the problem to two pairs of dual integral equations, which are then expressed as Fredholm integral equations of the second kind. Numerical values on the dynamic energy release rate are obtained to show the dependences upon the geometry and electric field. 相似文献
12.
On a semi-infinite crack penetrating a piezoelectric circular inhomogeneity with a viscous interface
We investigate a semi-infinite crack penetrating a piezoelectric circular inhomogeneity bonded to an infinite piezoelectric matrix through a linear viscous interface. The tip of the crack is at the center of the circular inhomogeneity. By means of the complex variable and conformal mapping methods, exact closed-form solutions in terms of elementary functions are derived for the following three loading cases: (i) nominal Mode-III stress and electric displacement intensity factors at infinity; (ii) a piezoelectric screw dislocation located in the unbounded matrix; and (iii) a piezoelectric screw dislocation located in the inhomogeneity. The time-dependent electroelastic field in the cracked composite system is obtained. Particularly the time-dependent stress and electric displacement intensity factors at the crack tip, jumps in the displacement and electric potential across the crack surfaces, displacement jump across the viscous interface, and image force acting on the piezoelectric screw dislocation are all derived. It is found that the value of the relaxation (or characteristic) time for this cracked composite system is just twice as that for the same fibrous composite system without crack. Finally, we extend the methods to the more general scenario where a semi-infinite wedge crack is within the inhomogeneity/matrix composite system with a viscous interface. 相似文献
13.
14.
The torsional impact response of a penny-shaped crack in a nonhomogeneous strip is considered. The shear modulus is assumed to be functionally graded such that the mathematics is tractable. Laplace and Hankel transforms were used to reduce the problem to solving a Fredholm integral equation. The crack tip stress field is obtained by considering the asymptotic behavior of Bessel function. Explicit expressions of both the dynamic stress intensity factor and the energy density factor were derived. And it is shown that, as crack driving force, they are equivalent for the present crack problem. Investigated are the effects of material nonhomogeneity and strip‘s highness on the dynamic fracture behavior.Numerical results reveal that the peak of the dynamic stress intensity factor can be suppressed by increasing the nonhomogeneity parameter of the shear modulus, and that the dynamic behavior varies little with the adjusting of the strip‘ s highness. 相似文献
15.
Tsviatko Rangelov Yonko Stoynov Petia Dineva 《International Journal of Solids and Structures》2011,48(20):2987-2999
Dynamic anti-plane fracture problem of an exponentially graded linear magnetoelectroelastic plane with a finite impermeable crack subjected to time-harmonic SH-waves is solved. Directions of wave propagation and material inhomogeneity are chosen in an arbitrary way. The fundamental solution for the coupled system of partial differential equations with variable coefficients is derived in a closed form by the hybrid usage of both an appropriate algebraic transformation for the displacement vector and the Radon transform. The formulated boundary-value problem is solved by a nonhypersingular traction boundary integral equation method (BIEM). The collocation method and parabolic approximation for the unknown generalized crack opening displacements are used for the numerical solution of the posed problem. Quarter point elements placed next to the crack-tips ensure properly modeling the singular behavior of the field variables around the crack tip. Fracture parameters as stress intensity factor, electric field intensity factor and magnetic field intensity factor are computed. Intensive simulations reveal the sensitivity of the generalized intensity factors (GIF) at the crack-tips to the material inhomogeneity, characteristics of the incident wave, coupling effects, wave-material and wave-crack interaction phenomena. 相似文献
16.
This paper presents the effects of elastic mismatch and crack-tip position on the stress intensity factors of a long crack penetrating a circular inhomogeneity. The analysis relies on closed-form solutions, derived using complex variable techniques, for the stresses and displacements produced by dislocations positioned inside and outside the inhomogeneity. Dislocation distributions are introduced to express the traction boundary condition along the crack surfaces as a system of singular integral equations, whose solution is obtained through a numerical procedure. It is shown that if the elastic mismatch is interpreted correctly, then the stress intensity factors of this micromechanical model are very good approximations to those computed using a Monte Carlo finite element model of a long crack in a polycrystalline plate with compliant grain boundaries. 相似文献
17.
《European Journal of Mechanics - A/Solids》2006,25(5):867-875
The problem of a Griffith crack of constant length propagating at a uniform speed in a plane non-homogeneous medium under uniform load is investigated. The equilibrium equations for the non-homogeneous medium are solved by using the Fourier transforms and then the problem is reduced to the solution of dual integral equations. Solving the dual integral equations we obtain the expression for the dynamic stress intensity factor at the edge of the crack. Finally the numerical results for the stress intensity factor are obtained which are displayed graphically to show the effect of the material non-homogeneity on the stress intensity factor. 相似文献
18.
Anti-plane interaction of a crack with a coated elliptical hole embedded in an infinite matrix under a remote uniform shear load is considered in this paper. Analytical treatment of the present problem is laborious due to the presence of material inhomogeneities and geometric discontinuities. Nevertheless, based on the technique of conformal mapping and the method of analytical continuation in conjunction with the alternating technique, general expressions for displacements and stresses in the coated layer and the matrix are derived explicitly in closed form. By applying the existing complex function solutions for a dislocation, the integral equations for a line crack are formulated and mode-III stress intensity factors are obtained numerically. Some numerical examples are given to demonstrate the effects of material inhomogeneity and geometric discontinuities on mode-III stress intensity factors. 相似文献
19.
V. V. Mikhas’kiv I. O. Butrak I. P. Laushnik 《Journal of Applied Mechanics and Technical Physics》2013,54(3):465-471
The propagation of harmonic elastic wave in an infinite three-dimensional matrix containing an interacting low-rigidity disk-shaped inclusion and a crack. The problem is reduced to a system of boundary integral equations for functions that characterize jumps of displacements on the inclusion and crack. The unknown functions are determined by numerical solution of the system of boundary integral equations. For the symmetric problem, graphs are given of the dynamic stress intensity factors in the vicinity of the circular inclusion and the crack on the wavenumber for different distances between them and different compliance parameters of the inclusion. 相似文献
20.
The dynamic theory of antiplane piezoelectricity is applied to solve the problem of a line crack subjected to horizontally polarized shear waves in an arbitrary direction. The problem is formulated by means of integral transforms and reduced to the solution of a Fredholm integral equation of the second kind. The path-independent integral G is extended here to include piezoelectric effects, and is evaluated at the crack tip to obtain the dynamic energy release rate. Numerical calculations are carried out for the dynamic stress intensity factor and energy release rate. The material is piezoelectric ceramic. 相似文献