Adsorption of cationic copolymer nanoparticles onto bamboo fiber surfaces measured by conductometric titration

Monosized nanoparticles of 57.3 nm were prepared by cationic emulsion polymerization using a polymerizable emulsifier DMHB. The adsorption of nanoparticles onto bamboo fibers was measured by conductometric titration. The results indicated that the adsorption capacity increased with increasing contact time until 120 min. The equilibrium data for nanoparticles adsorption onto bamboo fibers were well fitted to the Langmuir equation. Moreover, the monolayer adsorption capacity of nanoparticles in the concentration range (from 0.03 g/L to 0.6 g/L) studied, as calculated from Langmuir isotherm model at 25℃, was found to be 38.61 mg/g of fibers. The SEM images showed that the nanoparticles form a uniform monolayer on bamboo fiber surfaces.     

Synthesis and characterization of platinum monolayer oxygen-reduction electrocatalysts with Co–Pd core–shell nanoparticle supports

We synthesized Pt monolayer electrocatalysts for oxygen-reduction using a new method to obtain the supporting core–shell nanoparticles. They consist of a Pt monolayer deposited on carbon-supported Co–Pd core–shell nanoparticles with the diameter of 3–4 nm. The nanoparticles were made using a redox-transmetalation (electroless deposition) method involving the oxidation of Co by Pd cations, yielding a Pd shell around the Co core. The quality of the thus-formed core–shell structure was verified using transmission electron microscopy and X-ray absorption spectroscopy, while cyclic voltammetry was employed to confirm the lack of Co oxidation (dissolution). A Pt monolayer was deposited on the Co–Pd core–shell nanoparticles by the galvanic displacement of a Cu monolayer obtained by underpotential deposition. The total noble metal mass-specific activity of this Pt monolayer electrocatalyst was ca. 3-fold higher than that of commercial Pt/C electrocatalysts.     

Control of CaCO3 crystallization by demixing of monolayers

In this paper we describe how to template a demixed monolayer into a spatially patterned inorganic replica. For this purpose a new amphiphilic monomer was synthesized which can be polymerized both in solution and in the monolayer of a Langmuir-Blodgett (LB) trough. Since it inhibits the crystallization of CaCO3, it can be used--in combination with stearic acid (nucleation-promotor)--to control CaCO3 crystals formed under the monolayer. Investigations of the two-component monolayer (Langmuir isotherms and AFM measurements of transferred films) show--in the biphasic region--demixing in solid analogue stearic acid domains and the liquid analogue phase of the monomer. Crystallization of CaCO3 starts under the stearic acid domains whose size varies from less than 100 nm to several tens of micrometers. The addition of poly(acrylic acid) into the subphase hinders the three-dimensional growth of CaCO3 crystals from the monolayer into the solution. Thus, it becomes possible to transfer the pattern of the demixed domains into an inorganic replica of CaCO3.     

Study on the Structure and Properties of Ordered Conductive Polymer Ultrathin Film

A Langmuir-Blodgett (LB) inducing method was firstly used to prepare single layer and multilayer conducting composite PEDOT-PSS film. The film-forming ability of ionization ODA and ODA-SA monolayer spread on PEDOT-PSS nanoparticle sub-phase and the behavior of ODA/PEDOT-PSS assembly particles on pure water were firstly investigated. The results indicated that nanoparticles in the suphase are packed in the ionization monolayer and stable complex Langmuir film is formed at the air/water interface. It has been found that the best film-forming conditions for composite film are as follows:distinct interface was formed between ODA and PEDOT-PSS layer and single layer thickness of PEDOT-PSS was about 23 nm,well accordant to the size of PEDOT-PSS nanoparticles. Different structures were designed to test the conductive ability of these composite films and a variable range hopping (VRH) model was used to explain the film conductive mechanism. The results indicated that a 3D-VRH model explained well the transferring of charge carrier in the multilayer film.     

Flow-induced patterning of Langmuir monolayers

Insoluble monolayers on water have been patterned at the macroscopic scale (i.e., at the centimeter scale of the flow apparatus) as well as the mesoscopic scale (i.e., down to the micron scale resolvable via optical microscopy). The macroscopic patterning at the air/water interface results from a hydrodynamic instability leading to a steadily precessing flow pattern. The velocity field is measured, and the associated shear stress at the interface is shown to be locally amplified by the flow pattern. The resulting hydrodynamic effects on two different monolayer systems are explored: (1) the pattern in a model monolayer consisting of micron-size, surface-bound particles is visualized to show that the particles are concentrated into isolated regions of converging flow with high shear, and (2) Brewster angle microscopy of a Langmuir monolayer (vitamin K1) shows not only that the monolayer is patterned at the macroscopic scale but also that the localized high-shear flow further patterns the monolayer at the mesoscale.     

Nanoparticle‐Imprinted Polymers for Size‐Selective Recognition of Nanoparticles

Citrate‐stabilized gold nanoparticles 15 nm and 33 nm in diameter were transferred concomitantly with a monolayer of positively charged polyaniline by Langmuir–Blodgett transfer at pH 5 onto a conducting indium‐doped tin oxide (ITO) support. Films consisting of one to three layers of polyaniline with thicknesses of 1–3 nm were prepared and characterized by scanning electron microscopy (SEM), atomic force microscopy (AFM), and X‐ray photoelectron spectroscopy. After electro‐oxidation of the Au nanoparticles in 0.1 M KCl, cavities were left behind in the film that could be analyzed by SEM. These cavities were able to recapture analyte nanoparticles from a solution of pH 10 and showed size‐exclusion properties. The amount of nanoparticles taken up by the cavities was conveniently analyzed by measuring the charge associated with the electro‐oxidation of these particles in 0.1 M KCl after the film had been rinsed with water. The size‐exclusion properties improved with the number of Langmuir–Blodgett layers transferred.     

Orientation Ordering of Nanoparticle Ag/Co Cores Controlled by Electric and Magnetic Fields

The effect of electric and magnetic fields on the sandwich structure Pt/hydrogenated amorphous silicon (a‐Si:H)/stearic acid monolayer/Langmuir–Blodgett film of Ag/Co nanoparticles encapsulated in an organic envelope is studied. This structure is used as a working electrode in an electrochemical cell filled with NaCl solution (1 mM ) and equipped with an Ag/AgCl reference electrode. Reversible changes in voltammograms are observed due to treatments (negative or positive bias voltage and simultaneous laser irradiation) applied to the designed structure before measurements. As an explanation of the observed phenomena we suggest that both the Co‐up and Ag‐up (on the a‐Si:H surface) orientation orderings of nanoparticle Ag/Co cores are repeatedly reached. The role of the photovoltaic material (a‐Si:H) in the observed behavior is explained. Voltammetric measurements with an applied magnetic field support our idea about the orientation ordering of nanoparticle cores.     

Gold nanoparticle self-assembly in two-component lipid Langmuir monolayers

Self-assembly processes are considered to be fundamental factors in supramolecular chemistry. Langmuir monolayers of surfactants or lipids have been shown to constitute effective 2D "templates" for self-assembled nanoparticles and colloids. Here we show that alkyl-coated gold nanoparticles (Au NPs) adopt distinct configurations when incorporated within Langmuir monolayers comprising two lipid components at different mole ratios. Thermodynamic and microscopy analyses reveal that the organization of the Au NP aggregates is governed by both lipid components. In particular, we show that the configurations of the NP assemblies were significantly affected by the extent of molecular interactions between the two lipid components within the monolayer and the monolayer phases formed by each individual lipid. This study demonstrates that multicomponent Langmuir monolayers significantly modulate the self-assembly properties of embedded Au NPs and that parameters such as the monolayer composition, surface pressure, and temperature significantly affect the 2D nanoparticle organization.     

倒锥形抗反射表面微结构的构筑

利用Langmuir-Blodgett(LB) 技术在单晶硅表面转移岛状硬脂酸单层膜图案, 通过各向异性的湿法刻蚀构筑倒锥形表面微结构. 倒锥形结构的深度及表面抗反射性能主要与刻蚀的时间有关. 这种方法结合了自组装面积大和湿法刻蚀成本低的优点, 是一种廉价、高效的制备大面积抗反射微结构的方法, 在降低光学器件和太阳能电池的成本方面具有潜在应用价值.     

The Role of Oxidative Debris on Graphene Oxide Films

We study the effect of oxidative impurities on the properties of graphene oxide and on the graphene oxide Langmuir–Blodgett films (LB). The starting material was grupo Antolín nanofibers (GANF) and the oxidation process was a modified Hummers method to obtain highly oxidized graphene oxide. The purification procedure reported in this work eliminated oxidative impurities decreasing the thickness of the nanoplatelets. The purified material thus obtained presents an oxidation degree similar to that achieved by chemical reduction of the graphite oxide. The purified and non‐purified graphene oxides were deposited onto silicon by means of a Langmuir–Blodgett (LB) methodology. The morphology of the LB films was analyzed by field emission scanning microscopy (FE‐SEM) and micro‐Raman spectroscopy. Our results show that the LB films built by transferring Langmuir monolayers at the liquid‐expanded state of the purified material are constituted by close‐packed and non‐overlapped nanoplatelets. The isotherms of the Langmuir monolayer precursor of the LB films were interpreted according to the Volmer’s model.     

Interfacially formed organized planar inorganic, polymeric and composite nanostructures

This paper discusses synthetic strategies for fabrication of new organized planar inorganic, polymeric, composite and bio-inorganic nanostructures by methods based on chemical reactions and physical interactions at the gas-liquid interface, Langmuir monolayer technique, interfacial ligand exchange and substitution reactions, self-assembling and self-organization processes, DNA templating and scaffolding. Stable reproducible planar assemblies of ligand-stabilized molecular nanoclusters containing definite number of atoms have been formed on solid substrate surfaces via preparation and deposition of mixed Langmuir monolayers composed by nanocluster and surfactant molecules. A novel approach to synthesis of inorganic nanoparticles and to formation of self-organized planar inorganic nanostructures has been introduced. In that approach, nanoparticles and nanostructures are fabricated via decomposition of insoluble metal-organic precursor compounds in a layer at the gas-liquid interface. The ultimately thin and anisotropic dynamic monomolecular reaction system was realized in that approach with quasi-two-dimensional growth and organization of nanoparticles and nanostructures in the plain of Langmuir monolayer. Photochemical and redox reactions were used to initiate processes of interfacial nucleation and growth of inorganic phase. It has been demonstrated that morphology of resulting inorganic nanostructures can be controlled efficiently by variations of growth conditions via changes in state and composition of interfacial planar reaction media, and by variations of composition of adjacent bulk phases. Planar arrays and chains of iron oxide and ultrasmall noble metal (Au and Pd) nanoparticles, nanowires and new organized planar disk, ring, net-like, labyrinth and very high-surface area nanostructures were obtained by methods based on that approach. Highly organized monomolecular polymeric films on solid substrates were obtained via deposition of Langmuir monolayer formed by water-insoluble amphiphilic polycation molecules. Corresponding nanoscale-ordered planar polymeric nanocomposite films with incorporated ligand-stabilized molecular metallic nanoclusters and interfacially grown nanoparticles were fabricated successfully. Novel planar DNA complexes with amphiphilic polycation monolayer were formed at the gas-aqueous phase interface and then deposited on solid substrates. Toroidal and new net-like conformations were discovered in those complexes. Nanoscale supramolecular organization of the complexes was dependent on cationic amphiphile monolayer state during the DNA binding. These monolayer and multilayer DNA/amphiphilic polycation complex Langmuir-Blodgett films were used as templates and nanoreactors for generation of inorganic nanostructures via metal cation binding with DNA and following inorganic phase growth reactions. As a result, ultrathin polymeric nanocomposite films with integrated DNA building blocks and organized inorganic semiconductor (CdS) and iron oxide quasi-linear nanostructures were formed. It has been demonstrated that interaction of deposited planar DNA/amphiphilic polycation complexes with bulk phase colloid inorganic cationic ligands (CdSe nano-rods) can result in formation of new highly organized hybrid bio-inorganic nanostructures via interfacial ligand exchange and self-organization processes. The methods developed can be useful for investigation of fundamental mechanisms of nanoscale structural organization and transformation processes in various inorganic and molecular systems including bio-molecular and bio-inorganic nanostructures. Also, those methods are relatively simple, environmentally safe and thus could prove to be efficient practical instruments of molecular nanotechnology with potential of design and cost-effective fabrication of new controlled-morphology organized planar inorganic and composite nanostructured materials. Possible applications of obtained nanostructures and future developments are also discussed.     

Langmuir–Blodgett Monolayers and Films of Alkylated Tetraazacrowns Containing Metal Ions and Nanoparticles

The behavior of individual 1,7-dicetyltetraaza-12-crown-4 and its mixture with 1,4,7,10-tetracetyltetraaza-12-crown-4 in the Langmuir monolayers at the subphases containing Cu(II) ions or colloidal gold particles is studied. Based on the compression isotherms, the complexing ability of these amphiphilic cyclenes in a monolayer at the surface of aqueous dilute solutions of copper salt is established. It was shown that the fraction of complexes in a monolayer is proportional to the copper ion concentration in the subphase. Using surface balance, atomic force microscopy, and electron microscopy methods, it was revealed that the monolayer of dicetylcyclene at the surface of gold hydrosol binds nanoparticles from the subphase; the number of particles bound by the monolayer is proportional to their content in the hydrosol. The Langmuir–Blodgett films (LBF) of dicetylcyclene are prepared; their ability to bind copper ions from solution was disclosed by quartz crystal microbalance. The LBFs of dicetylcyclene containing gold nanoparticles in each layer are assembled.     

In situ observation of gamma-Fe2O3 nanoparticle adsorption under different monolayers at the air/water interface

We studied the adsorption of gamma-Fe 2O 3 nanoparticles from an aqueous solution under different charged Langmuir monolayers (stearic acid, stearyl alcohol, and stearyl amine). The aqueous subphase was composed of a colloidal suspension of gamma-Fe 2O 3 nanoparticles. The average hydrodynamic diameter of the nanoparticles measured by dynamic light scattering measurements was 16 nm. The observed zeta potential of +40 mV (at pH 4) results in a long-term stability of the colloidal dispersion. The behavior of the different monolayer/nanoparticle composites were studied with surface pressure/area (pi/ A) isotherms. The adsorption of the nanoparticles under the different monolayers induced an expansion of the monolayers. These phenomena depended on the charge of the monolayers. After the Langmuir/Blodgett transfer on glass substrates, the nanoparticle/monolayer composite films were studied by means of UV-vis spectroscopy. The spectra pointed to increasing adsorption of the nanoparticles with increasing electronegativity of the monolayers. On the basis of these results, we studied the in situ adsorption of nanoparticles under the different monolayers by X-ray reflectivity measurements. Electron density profiles of the liquid/gas interfaces were obtained from the X-ray reflectivity data. The results gave clear evidence for the presence of electrostatic interaction between the differently charged monolayers and the positively charged nanoparticles. While the adsorption process was favored by the negatively charged stearic acid monolayer, the positively charged layer of stearyl amine prevented the formation of ultrathin nanoparticle layers.     

Patterning of magnetic bimetallic coordination nanoparticles of Prussian blue derivatives by the Langmuir-Blodgett technique

We report a novel method to prepare patterns of nanoparticles over large areas of the substrate. This method is based on the adsorption of the negatively charged nanoparticles dispersed in an aqueous subphase onto a monolayer of the phospholipid dipalmitoyl-l-α-phosphatidylcholine (DPPC) at the air-water interface. It has been used to prepare patterns of nanoparticles of Prussian blue analogues (PBA) of different size (K(0.25)Ni[Fe(CN)(6)](0.75) (NiFe), K(0.25)Ni[Cr(CN)(6)](0.75) (NiCr), K(0.25)Ni[Co(CN)(6)](0.75) (NiCo), Cs(0.4)Co[Cr(CN)(6)](0.8) (CsCoCr), and Cs(0.4)Co[Fe(CN)(6)](0.9) (CsCoFe)). The behavior of DPPC monolayer at the air-water interface in the presence of the subphase of PBA nanoparticles has been studied by the compression isotherms and Brewster angle microscopy (BAM) images. Atomic force microscopy (AFM) of the transferred films on mica substrates shows that patterns of the nanoparticles are observed for a 10(-4) M concentration of the subphase, based on the nanoparticle precursors, at surface pressures between 1 and 6 mN/m and transfer velocities from 10 to 80 mm/min. Vertical, horizontal, or tilted fringes of the nanoparticles with respect to the transfer direction can be obtained depending on the transfer velocity and surface pressure.     

Morphological investigation of hybrid Langmuir-Blodgett films of arachidic acid with a hydrotalcite/dendrimer nanocomposite

A hydrotalcite clay/dendrimer nanocomposite prepared by the ionic exchange process was adsorbed from suspension of the nanocomposite on a Langmuir monolayer of arachidic acid at the air/water interface, followed by compressing and transferring onto an arachidic acid monolayer Langmuir-Blodgett (LB) film on mica. For comparison, the hydrotalcite-adsorbed hybrid film was also prepared. The morphology of hydrotalcite and the nanocomposite studied by transmission electron microscopy indicated the layered structures with respectively 1.2 +/- 0.3 and 3.2 +/- 0.5 nm repeating distances. The hybrid Langmuir films displayed the occupied surface area of 0.24 nm2 for both hydrotalcite and the nanocomposite. The formation of hybrid Langmuir films was confirmed by Brewster angle microscopy. Atomic force microscopic images of hybrid LB films revealed the formation of plateau domains with the height difference of 6 nm for hydrotalcite and 12 nm for the nanocomposite and the presence of dendrimers adsorbed on the clay surface of the nanocomposite.     

One-step synthesis of monodisperse silver nanoparticles beneath vitamin E Langmuir monolayers

The monodisperse silver nanoparticles were synthesized by one-step reduction of silver ions in the alkaline subphase beneath vitamin E (VE) Langmuir monolayers. The monolayers and silver nanocomposite LB films were characterized by surface pressure-area (pi-A) isotherms, transmission electron microscopy (TEM), ultraviolet-visible spectroscopy (UV-vis), selected area electron diffraction (SAED), Fourier transform infrared transmission spectroscopy (FTIR), and X-ray photoelectron spectroscopy (XPS), respectively. The results showed that the limiting area/VE molecule on different subphases varied. The phenolic groups in the VE molecules were converted to a quinone structure, and the silver ions were mainly reduced to ellipsoidal and spherical nanoparticles. The arrangement of the nanoparticles changed from sparseness to compactness with reaction time. The electron diffraction pattern indicated that the silver nanoparticles were face-centered cubic (fcc) polycrystalline. Silver nanocomposite LB films with excellent quality could be formed on different substrates, indicating that the transfer ratio of monolayer containing silver nanoparticles is close to unity. The dynamic process of reduction of silver ions by VE LB films was also studied through monitoring the conductivity of an Ag2SO4 alkaline solution.     

Studies of nanoparticulate cadmium sulfide in amphiphilic polymaleic acid octadecanol ester Langmuir-Blodgett films

The reversed micelles of CdS nanoparticles capped with oligomer–polymaleic acid octadecanol ester (PMAO) were synthesized by a colloid chemical method in an aqueous system. The chemical ratio of PMAO between the carboxylic group and the hydrocarbon chain was controlled to 1.5 : 1. The PMAO-capped CdS nanoparticles were transferred on to CaF₂ and Si substrates by the Langmuir–Blodgett (LB) technique. Surface pressure–area isotherms indicated that PMAO-capped CdS nanoparticles could form a stable monolayer on the water subphase. The measurement of FTIR and small angle X-ray diffraction showed that the reversed micelles of PMAO-capped CdS nanoparticles were formed with a uniform size and order in LB films. The photoluminescence properties of PMAO-capped CdS both in the solution and in the LB film indicated that the photoluminescence peaks of reversed micelles obviously changed as a result of the energy transfer from PMAO to CdS and the interaction between clusters.     

Free‐Standing Gold‐Nanoparticle Monolayer Film Fabricated by Protein Self‐Assembly of α‐Synuclein

Free‐standing nanoparticle films are of great importance for developing future nano‐electronic devices. We introduce a protein‐based fabrication strategy of free‐standing nanoparticle monolayer films. α‐Synuclein, an amyloidogenic protein, was utilized to yield a tightly packed gold‐nanoparticle monolayer film interconnected by protein β‐sheet interactions. Owing to the stable protein–protein interaction, the film was successfully expanded to a 4‐inch diameter sheet, which has not been achieved with any other free‐standing nanoparticle monolayers. The film was flexible in solution, so it formed a conformal contact, surrounding even microspheres. Additionally, the monolayer film was readily patterned at micrometer‐scale and thus unprecedented double‐component nanoparticle films were fabricated. Therefore, the free‐floating gold‐nanoparticle monolayer sheets with these properties could make the film useful for the development of bio‐integrated nano‐devices and high‐performance sensors.     

Formation of silver nanoparticles at the air-water interface mediated by a monolayer of functionalized hyperbranched molecules

Nanofibrillar micellar structures formed by the amphiphilic hyperbranched molecules within a Langmuir monolayer were utilized as matter for silver nanoparticle formation from the ion-containing water subphase. We observed that silver nanoparticles were formed within the multifunctional amphiphilic hyperbranched molecules. The diameter of nanoparticles varied from 2-4 nm and was controlled by the core dimensions and the interfibrillar free surface area. Furthermore, upon addition of potassium nitrate to the subphase, the Langmuir monolayer templated the nanoparticles' formation along the nanofibrillar structures. The suggested mechanism of nanoparticle formation involves the oxidation of primary amino groups by silver catalysis facilitated by "caging" of silver ions within surface areas dominated by multibranched cores. This system provides an example of a one-step process in which hyperbranched molecules with outer alkyl tails and compressed amine-hydroxyl cores mediated the formation of stable nanoparticles placed along/among/beneath the nanofibrillar micelles.     

Electronic and magnetic properties of all 3d transition‐metal‐doped ZnO monolayers

Stable geometries, electronic structures, and magnetic properties of the ZnO monolayer doped with 3d transition‐metal (TM) (Sc, Ti, V, Cr, Mn, Fe, Co, Ni, and Cu) atoms substituting the cation Zn have been investigated using first‐principles pseudopotential plane wave method within density functional theory (DFT). It is found that these nine atomic species can be effectively doped in the ZnO monolayer with formation energies ranging from ?6.319 to ?0.132 eV. Furthermore, electronic structures and magnetic properties of ZnO monolayer can be modified by such doping. The results show that the doping of Cr, Mn, Fe, Co, Ni, and Cu atoms can induce magnetization, while no magnetism is observed when Sc, Ti, and V atoms are doped into the ZnO monolayer. The magnetic moment is mainly due to the strong p–d mixing of O and TM (Cr, Mn, Fe, Co, Ni, and Cu) orbitals. These results are potentially useful for spintronic applications and the development of magnetic nanostructures. © 2013 Wiley Periodicals, Inc.