萤火虫氨基氧化荧光素相似物作为有机发光二极管材料的理论研究

由于萤火虫荧光素具有发光效率高,能发出从绿色到红色多种颜色光的特点使其在有机发光器件领域存在巨大的应用潜力.为了探索结构和性质的关系,我们用苯并吡喃、联苯、联吡啶、菲、邻二氮杂菲、芴和晕苯取代氧化荧光素中的苯并噻唑部分,设计了一系列氨基氧化荧光素相似物.本工作用密度泛函理论和含时密度泛函理论方法对这些化合物进行了一系列光电性质的研究.计算结果表明,含有氮原子的氨基联吡啶氧化荧光素(BPAOL)和氨基邻二氮杂菲氧化荧光素(PMAOL)与含有碳原子的氨基联苯氧化荧光素(BIAOL)和氨基菲氧化荧光素(PHAOL)比较具有较小的最高占据分子轨道(HOMO)和最低非占据分子轨道(LUMO)轨道能量及更大的电离能(IP)和电子亲和势(EA)值.化合物氨基氧化荧光素(AOL),BIAOL,BPAOL,PHAOL,PMAOL,氨基芴氧化荧光素(FLAOL)和氨基晕苯氧化荧光素(COAOL)可以作为电子注入/传输材料.AOL、PHAOL、FLAOL和COAOL可以作为蓝色发光材料.     

meso取代卟啉衍生物的结构和光学性质

meso取代卟啉衍生物在红色电致发光材料上有较大的应用前景.本文采用密度泛函理论(DFT)B3LYP方法,对以反式二噻吩(S)作为能量传输供体的卟啉衍生物,Zn-5,10,15,20-tetra(2-[thiophen-2-yl]thiophene)porphyrin(SPZ)和5,10,15,20-tetra(2-[thiophen-2-yl]thiophene)porphyrin(TSP),进行了全优化.计算了二者的电离能(IP)、电子亲和势(EA)、空穴抽取能(HEP)、电子抽取能(EEP)、空穴和电子重组能(λ),评估了它们的载流子注入和传输能力.用含时密度泛函理论(TDDFT)/B3LYP/6-31G(d)方法计算了吸收光谱.用从头算单激发组态相互作用(CIS)方法优化了SPZ和TSP的最低激发单重态S1,并用含时Hartree-Fock(TDHF)方法研究它们的荧光光谱.理论计算结果表明,引入S基团对卟啉的光物理性质影响很大,尤其是电子注入和传输性质.     

碳氟键均裂解离能的密度泛函理论研究

运用6种密度泛函方法(B3LYP, B3P86, B3PW91, PBE1PBE, MPW1B95, MPW1K)对15个含氟有机化合物的碳氟键均裂解离能进行理论计算, 得到的理论值与实验值比较, 发现B3P86方法用于碳氟键均裂解离能的计算相对可靠. 使用验证后的理论方法对含氟杂环有机化合物和卤氟烃中的碳氟键均裂解离能进行了预测和分析, 并进一步讨论了α-取代基效应以及Hammett型取代基效应对碳氟键均裂解离能的影响.     

硅杂环戊二烯衍生物电子结构与光谱性质的理论研究

采用密度泛函理论(DFT)B3LYP/6-31G*方法, 对2,5位取代的硅杂环戊二烯(Silole)系列衍生物进行几何结构优化, 通过计算得到电离能、电子亲和势、空穴抽取能及电子抽取能等相关能量, 并使用TD-DFT方法研究其吸收光谱, 分析相关能量及光谱的变化规律. 采用单组态相互作用(CIS/6-31G*)方法优化得到它们的最低单重激发态(S1)结构, 在此基础上, 使用TD-DFT方法计算对应的发射光谱. 分析2,5位芳基取代硅杂环戊二烯衍生物(DADPS)激发态与基态的结构差异及原因, 研究前线分子轨道的分布情况, 并讨论发光特征及载流子传输性能. 研究结果表明, 激发态结构弛豫主要发生在Silole环和直接与2,5位芳基相连的部位; 前线轨道主要分布在Silole环和2,5位芳基上; 二吡咯取代物有望成为空穴传输材料, 二噻吩取代物和二呋喃取代物有望在发光器件中表现出较高的发光效率.     

呋喃查尔酮结构与电子光谱的密度泛函理论研究

在密度泛函理论的PBE1PBE/6-31G(d)水平上对呋喃查尔酮及其衍生物的几何结构进行优化计算.在获得基态稳定结构的基础上,应用含时密度泛函理论计算其电子吸收光谱,探讨了取代基和溶剂对电子吸收光谱的影响,计算结果与实验结果吻合很好,平均绝对偏差仅为3.3nm(0.04eV).结果表明,取代基的引入和溶剂极性的增大均使光谱发生红移.通过前线轨道分析,揭示了该类化合物的主要吸收峰均源自分子中HOMO→LUMO电子跃迁.     

二邻苯二胺合镍(Ⅱ)载流子传输性能的理论研究

利用密度泛函理论UB3LYP方法, 对二邻苯二胺合镍(Ⅱ)(PHDANI)的基态和离子态几何结构进行全优化, 模拟其双自由基特性. 运用势能面曲线法计算了PHDANI的空穴和电子重组能. 从晶体结构中选出所有可能最近的载流子传输路径, 计算相应的传输积分, 结合Marcus电荷转移理论探讨PHDANI的载流子传输性质. 计算结果表明, 在单重态双自由基特性下, 空穴和电子的迁移率分别达到0.253和0.135 cm²·V^-1·s^-1, 空穴和电子传输迁移率都很高且能达到平衡, 从理论层面上阐明了PHDANI可以作为很好的双极性传输材料.     

9,9’-螺双芴的光电性能

采用密度泛函理论(DFT)-B3LYP/6-31G(d)方法对9,9'-螺双芴低聚物[(SBF)n(n=1-4)]体系进行全优化, 得到各分子的最高占据轨道(HOMO)和最低空轨道(LUMO)能量及HOMO-LUMO能隙, 结果表明各分子整体表现出很好的共轭性质. 并在分子的阳离子和阴离子状态的优化结构基础上, 计算得到电离势(IP)、电子亲和势(EA)、空穴抽取能(HEP)、电子抽取能(EEP)和重组能等相关能量. 利用单激发组态相互作用(CIS)/3-21G方法优化得到9,9'-螺双芴单体的S1激发态的几何构型. 用含时密度泛函理论(TD-DFT)方法计算得到了分子吸收光谱和荧光光谱的相关数据. 随着聚合长度的增加, 能隙变窄, 空穴注入和电子转移的能力都相应提高, 吸收光所需能量减小, 吸收强度(f)增大, 光谱红移. 采用线性外推法, 利用低聚物分子的各种性质与聚合度n之间的关系, 得到高聚物的相应性质.为考察9位螺芴化的影响, 将(SBF)n的相关性质与母体芴的低聚物[(FL)n(n=1-4)]进行比较, 由两者的计算结果对比显示, 在芴的9位螺芴化可以提高电子和空穴的传输能力, 并同时保留芴优良的发光性质.     

间位取代卟啉及其锌卟啉的电子吸收光谱

取代的卟啉类衍生物在气敏传感器方面具有广泛的应用前景.本文采用了密度泛函理论(DFT)和含时密度泛函理论(TD-DFT)研究了四种不同取代基的卟啉衍生物(meso位四硝基苯基/四氨基苯基卟啉(NO2PP,NH2PP)及其相应的锌金属卟啉衍生物(NO2ZnPP,NH2ZnPP))的紫外和近紫外光谱特征.利用两种不同的交换相关泛函(广义梯度近似泛函(PBE)和杂化密度泛函(B3LYP))优化了上述四种物质的结构,并应用TD-DFT计算了相应的电子激发能量和振动强度.结果表明,取代卟啉的吸收光谱与大量的电子跃迁有关;与B3LYP泛函预测的光谱相比,PBE泛函所得B带以及Q带的波长位置与实验值更为接近.另外,计算所得硝基取代基卟啉的B带相对于氨基取代基卟啉的B带发生了红移,这与实验现象也保持一致.由于卟啉衍生物的三重激发态在电子转移中有很重要的应用,因此在PBE/6-31G(d)水平上计算了四种物质的最低三重激发态能量,分别为1.426、1.469、1.608和1.581eV.     

3,9-咔唑聚合物基态和激发态性质的理论研究

用密度泛函B3LYP方法对3,9-咔唑低聚物[(3,9-carbazole)n(n=1,2,3,4,6,8)]体系进行了全优化, 计算得到电离能、电子亲合势、空穴抽取能及电子抽取能等相关能量, 用ZINDO和TD-DFT方法计算得到吸收光谱; 分析了各种能量的变化及光谱规律. 用外推法由低聚物分子的各种性质与聚合度n相联系得到高聚物的性质, 将所得结果与2,7-咔唑(2,7-carbazole)及类似聚合物进行了比较分析. 结果表明, 3,9位聚合的咔唑整体共轭程度降低, 光谱蓝移, 其IP值和聚芴相近, 可以作为空穴接受材料应用于多层电子荧光器件的空穴传输层. 用CIS方法进行优化得到部分分子的S1激发态结构, 用ZINDO和TD-DFT方法得到对应的发射光谱.     

9,9′-螺双芴的光电性能

采用密度泛函理论(DFT)-B3LYP/6-31G(d)方法对9,9'-螺双芴低聚物[(SBF)_n(n=1-4)]体系进行全优化,得到各分子的最高占据轨道(HOMO)和最低空轨道(LUMO)能量及HOMO-LUMO能隙,结果表明各分子整体表现出很好的共轭性质.并在分子的阳离子和阴离子状态的优化结构基础上,计算得到电离势(IP)、电子亲和势(EA)、空穴抽取能(HEP)、电子抽取能(EEP)和重组能等相关能量.利用单激发组态相瓦作用(CIS)/3-21G方法优化得到9,9'-螺双芴单体的S_1激发态的几何构型.用含时密度泛函理论(TD-DFT)方法计算得到了分子吸收光谱和荧光光谱的相关数据.随着聚合长度的增加,能隙变窄,空穴注入和电子转移的能力都相应提高,吸收光所需能量减小,吸收强度(f)增大,光谱红移.采用线性外推法,利用低聚物分子的各种性质与聚合度n之间的关系,得到高聚物的相应性质.为考察9位螺芴化的影响,将(SBF)_n的相关性质与母体芴的低聚物[(FL)_n(n=1-4)]进行比较,由两者的计算结果对比显示,在芴的9位螺芴化可以提高电子和空穴的传输能力,并同时保留芴优良的发光性质.     

TD-DFT Accuracy in Determining Excited-state Structures and Fluorescence Spectra of Firefly Emitter

We analyzed the excited-state structures and emission spectra of firefly emitter, the anionic keto form of firefly oxyluciferin(keto-1), determined by the time dependent-density functional theory(TD-DFT) approach. The analysis is based on a direct comparison with the highly correlated CASSCF(MS-CASPT2) ab initio approach. 49 DFT functionals were considered and applied to the study. Among the tested functionals, mPW3PBE, B3PW91 and B3P86 give the best performance for ground-state geometry, absorption spectrum, excited-state geometry and emission spectrum.     

Structural,optical, and charge transport properties of cyclopentadithiophene derivatives: a theoretical study

Density functional theory calculations were carried out to investigate the structural and opto-electronic properties of cyclopenta[2,1-b:3,4-b′]dithiophene (CPDT) derivatives. The ground state, cationic and anionic geometries of cyclopentadithiophene derivatives were optimized at B3LYP/6-311G(d,p) level of theory. Based on these geometries, ionic state properties such as ionization potentials, electron affinities, hole extraction potential, and electron extraction potential of cyclopentadithiophene derivatives have been calculated. The charge transfer integral, spatial overlap integral, and site energy were calculated from the matrix elements of Kohn–Sham Hamiltonian. Computed results show that the mobility of charge carriers in CPDT derivatives is strongly affected by the substitution of electron withdrawing group at bridge-head and α-positions. The excited state geometry of CPDT derivatives were optimized using configuration interaction singles method. On the basis of ground and excited states geometry, absorption and emission spectra of cyclopentadithiophene derivatives were calculated using the time-dependent density functional theory method. It has been observed that the substitution of EWG in cyclopentadithiophene core alters the absorption and emission spectra. The nonlinear optical property of CPDT derivatives have been studied through computed static polarizability and first hyperpolarizability.     

Predictions of the electronic absorption and emission spectra of luciferin and oxyluciferins including solvation effects

The ground and excited state properties of luciferin (LH(2)) and oxyluciferin (OxyLH(2)), the bioluminescent chemical in the firefly, have been characterized using the configuration interaction singles (CIS) and time dependent density functional (TDDFT) methods. The effects of solvation on the electronic absorption and emission spectra of luciferin and oxyluciferin are predicted with a self-consistent isodensity polarized continuum model of the solvent using both the configuration interaction singles model and time dependent density functional theory. The S(0)-->S(1) vertical excitation energies in the gas phase and in water are obtained with both methods. Optimizations of the excited state geometries permit the first predictions of the fluorescence spectra for these biologically important molecules. Shifts in both the absorption and emission spectra on proceeding from the gas phase to aqueous solution also are predicted.     

TDDFT Study of the Electronic Structure,Absorption and Emission Spectra of the Light Emitters of the Amazing Firefly Bioluminescence and Solvation Effects on the Spectra

The ground and excited state properties of luciferin (LH₂) and oxyluciferin (OxyLH₂), the bioluminescent chemicals in the firefly, have been characterized using density functional theory (DFT) and time dependent DFT (TDDFT) methods. The effects of solvation on the electronic absorption and emission spectra of luciferin and oxyluciferin were predicted with a self‐consistent isodensity polarized continuum model of the solvent using TDDFT. The S₀→S₁ vertical excitation energies in the gas phase and in water were obtained. Optimizations of the excited state geometries permitted the first predictions of the fluorescence spectra for these biologically important molecules. Shifts in both of the absorption and emission spectra on proceeding from the gas phase to aqueous solution were also predicted.     

ANALOGS AND DERIVATIVES OF FIREFLY OXYLUCIFERIN, THE LIGHT EMITTER IN FIREFLY BIOLUMINESCENCE

Abstract— The 5-methyl analog of firefly oxyluciferin, two isomeric O-methyl ether derivatives of it and an O, O Ó-dimethyl ether derivative were synthesized and their UV absorption and fluorescence emission spectra were determined. Comparisons of the emission data with the emission wavelength in bioluminescence indicate that the mono-anions of firefly oxyluciferin are candidates for the light-emitters in bioluminescence. Further, we have found that the chemiluminescence of active esters of firefly luciferin produces (from the keto form of oxyluciferin) only red light emission under a variety of conditions; a yellow-green light emission (from the enolic forms of the oxyluciferin product) could not be elicited.     

Theoretical study of the vibrational frequencies of carbon disulfide

A benchmark comparison for different computational methods and basis sets has been presented. In this study, five computational methods (Hartree–Fock (HF), MP2, B3LYP, MPW1MP91, and PBE1PBE) along with 18 basis sets have been applied to optimize the geometry of carbon disulfide (CS₂), and further calculate the vibrational frequencies of the optimized geometries. The differences between the calculated frequencies and corresponding experimental data are used to evaluate the efficiency of each combination of computational method and basis set. The comparison of frequency difference indicates that B3LYP generally gives the best prediction of frequencies for CS₂, whereas the other two density functional theory (DFT) methods, i.e., MPW1PW91 and PBE1PBE, often give parallel results. Although MP2 predicts the frequencies with accuracy almost as good as those from DFT methods, in a particular case, HF calculation outperforms MP2 as well as MPW1PW91 and PBE1PBE for prediction of the frequency of asymmetrical stretching for CS₂. © 2013 Wiley Periodicals, Inc.     

Multilevel and density functional electronic structure calculations of proton affinities and gas-phase basicities involved in biological phosphoryl transfer

Five multilevel model chemistries (CBS-QB3, G3B3, G3MP2B3, MCG3/3, and MC-QCISD/3) and seven hybrid density functional methods (PBE0, B1B95, B3LYP, MPW1KCIS, PBE1KCIS, and MPW1B95) have been applied to the calculation of gas-phase basicity and proton affinity values for a series of 17 molecules relevant to the study of biological phosphoryl transfer. In addition, W1 calculations were performed on a subset of molecules. The accuracy of the methods was assessed and the nature of systematic errors was explored, leading to the introduction of a set of effective bond enthalpy and entropy correction terms. The multicoefficient correlation methods (MCG3/3 and MC-QCISD), with inclusion of specific zero-point scale factors, slightly outperform the other multilevel methods tested (CBS-QB3, G3B3, and G3MP2B3), with significantly less computational cost, and in the case of MC-QCISD, slightly less severe scaling. Four density functional methods, PBE1KCIS, MPW1B95, PBE0, and B1B95 perform nearly as well as the multilevel methods. These results provide an important set of benchmarks relevant to biological phosphoryl transfer reactions.     

线型和星型平面噻吩类低聚物衍生物分子结构及光电性质研究

运用密度泛函DFT B3LYP／6-31G(d)方法对线型(a)和星型(b)平面噻吩类低聚物衍生物分别进行了几何构型优化,并采用含时密度泛函TD-DFT B3LYP／6-31G(d)方法计算了其紫外吸收光谱．计算结果表明:用TD-DFT．方法计算体系的紫外吸收光谱值与实验数据吻合;通过对噻吩类低聚物衍生物分子几何结构和前线分子轨道能级的分析,并从理论上解释了线型(a)和星型(b)衍生物光谱性质的差异:后者与前者相比较吸收光谱发生红移,这是由于星型结构使其相应HOMO能级升高,电离能(IP)降低,成为很好的电子给体和空穴传输材料．