米格列奈及其3个异构体杂质的反相液相色谱分离及质谱碎裂分析

建立了超高效反相液相色谱-高分辨质谱方法以实现米格列奈及其3种异构体杂质的分离，以ACQUITY UPLC HSS T3（100 mm×2.1 mm，1.8 μ m）为色谱柱，以水-乙腈-正戊醇（75：25：1）（用甲酸调节pH至1.8）为流动相，流速为0.4 mL/min。根据Q Exactive四极杆/静电场轨道阱高分辨质谱的精确质量数及碎裂情况，发现了米格列奈及3种异构体存在碎片离子丰度的明显差异，确认其中两种为本次新发现的异构体杂质，并推断了米格列奈及3种异构体杂质可能的质谱裂解机理。经验证，该方法的灵敏度、重复性及线性均满足分析要求。在此基础上，对米格列奈异构体杂质的来源进行了探讨，发现异构体杂质1可在高温下降解产生，并对各企业的米格列奈钙原料样品进行了测定。     

Impurity profile of macitentan in tablet dosage form using a stability-indicating high performance liquid chromatography method and forced degradation study

Macitentan (MAC) is a pulmonary arterial hypertension (PAH) drug marketed as a tablet and often has stability issues in the final dosage form. Quantitative determination of MAC and its associated impurities in tablet dosage form has not been previously reported. This study quantified impurities present in Macitentan tablets using a binary solvent-based gradient elution method using reversed phase-high performance liquid chromatography. The developed method was validated per International Conference on Harmonization (ICH) guidelines and the drug product was subjected to forced degradation studies to evaluate stability. The developed method efficiently separated the drug and impurities (48 min) without interference from solvents, excipients, or other impurities. The developed method met all guidelines in all characteristics with recoveries ranging from 85%-115%, linearity with r² ≥ 0.9966, and substantial robustness. The stability-indicating nature of the method was evaluated using stressed conditions (hydrolysis:1 N HCl at 80℃/15 min; 1 N NaOH at 25℃/45 min; humidity stress (90% relative humidity) at 25℃ for 24 h, oxidation:at 6% (v/v) H₂O₂, 80℃/15 min, thermolysis:at 105℃/16 h and photolysis:UV light at 200 Wh/m²; Fluorescent light at 1.2 million luxh). Forced degradation experiments showed that the developed method was effective for impurity profiling. All stressed samples were assayed and mass balance was>96%. Forced degradation results indicated that MAC tablets were sensitive to hydrolysis (acid and alkali) and thermal conditions. The developed method is suitable for both assay and impurity determination, which is applicable to the pharmaceutical industry.     

Development of a HPTLC method for in-process purity testing of pentoxifylline

A HPTLC method for the separation and identification of pentoxifylline and related substances, impurities of reaction partners, and side reaction products has been developed using different mobile and stationary phases. For quantitative assay of possible by-products as impurities, LiChrospher RP-18 F254s chromatoplates, acetone-chloroform-toluene-dioxane (2:2:1:1 v/v) as a mobile phase, and detection at 275 nm were employed. Linearity (r > or = 0.997), recovery (86.5-115.5%), and determination limit (0.1-0.6%) were evaluated and found to be satisfactory. This method enables monitoring of the synthesis, as well as purity control of pentoxifylline-containing raw materials and pharmaceuticals.     

高效液相色谱-离子阱/飞行时间质谱鉴定违禁药品邻氯苯基环戊酮中杂质及其标准物质的制备

建立了高效液相色谱-离子阱/飞行时间质谱（HPLC-IT/TOF MS）分析违禁药品邻氯苯基环戊酮样品中杂质成分的方法。对邻氯苯基环戊酮标准品进行多级质谱分析,根据各碎片离子的精确质量数推测邻氯苯基环戊酮的裂解路径,并利用该方法检测出邻氯苯基环戊酮样品中的2种杂质成分：2-氯苯甲酸酸酐和1,2-二邻氯苯甲酰基环戊烯,推断出该违禁药品的合成方法,为追溯其来源提供了重要依据。同时建立了制备邻氯苯基环戊酮标准品的方法,制备高效液相色谱条件是流动相甲醇-水（85∶15,v/v）,流速8 mL/min,进样量1 mL。制备得到的邻氯苯基环戊酮标准物质纯度为99.53%。该方法简单、高效,可拓展应用于其他违禁药物标准物质的制备。     

Liquid chromatographic method for the analysis of buspirone HCl and its potential impurities

An accurate, reproducible, and sensitive method for the determination of buspirone HCl and its potential impurities is developed and validated. The validated liquid chromaography method is conducted to meet the Food and Drug Administration/ International Conference on Harmonization requirements for the analysis of buspirone HCI in the presence of its impurities. Five buspirone HCI potential impurities, including 1-(2-pyrimidinyl)-piperazine (I), propargyl chloride (II), 3,3'-tetramethylene glutarimide (III), propargyl glutarimide (IV), and the Mannich base-condensate of I-IV fumarate (V), are separated using a microBondapack C18 column by gradient elution with a flow rate 2.0 mL/min. The initial mobile phase composition is 90:10 (v/v) 10mM KH2PO4 (pH 6.1)-acetonitrile. After a 1-min initial hold, a linear gradient is performed in 26 min to 35:65 (v/v) 10mM KH2PO4 (pH 6.1)-acetonitrile. The samples are detected at 210 and 240 nm using a photo-diode array detector. The linear range of detection for buspirone HCI was between 1.25 ng/microL and 500 ng/microL, with a limit of quantification of 1.25 ng/microL. The linearity, range, peak purity, selectivity, system performance parameters, precision, accuracy, and robustness for all of the impurities were also shown to have acceptable values.     

Determination of impurities in a novel analogue of adenosine 5′-triphosphate by capillary electrophoresis

A capillary electrophoretic method using an uncoated capillary was developed to resolve potential impurities in FPL 67085XX, a novel phosphonate analogue of adenosine 5′-triphosphate. The effects of buffers, buffer concentration, eleunt pH and methanol were investigated. Optimum resolution of the impurities was achieved using an eluent consisting of 7% (v/v) methanol in 25 mM phosphate buffer-2 mM EDTA adjusted to pH 6.6.     

Separation and determination of synthetic impurities of sildenafil (Viagra) by reversed-phase high-performance liquid chromatography.

A simple and rapid high-performance liquid chromatographic method for the separation and determination of process-related impurities of sildenafil was developed. The separation was achieved on a reversed-phase C18 column using acetonitrile-0.05 M potassium dihydrogen orthophosphate (70:30 v/v) as a mobile solvent at a flow rate of 1.0 ml/min and UV detection at 230 nm. The method was used not only for quality assurance, but also for monitoring the chemical reactions during the synthesis of sildenafil. It was found to be specific, precise and reliable for the determination of all process-related impurities of sildenafil in bulk drugs and formulations.     

Isolation and characterization of degradation products of citalopram and process-related impurities using RP-HPLC

A reversed-phase high-performance liquid chromatographic method for simultaneous separation and determination of citalopram hydrobromide and its process impurities in bulk drugs and pharmaceutical formulations was developed. The separation was accomplished on an Inertsil ODS 3V (250x4.6 mm; particle size 5 mum) column using 0.3% diethylamine (pH = 4.70) and methanol/acetonitrile (55:45 v/v) as mobile phase in a gradient elution mode. The eluents were monitored by a photodiode array detector set at 225 nm. The chromatographic behavior of all the related substances was examined under variable conditions of different solvents, buffer concentrations, and pH. The method was validated in terms of accuracy, precision, and linearity. The method could be of use not only for rapid and routine evaluation of the quality of citalopram in bulk drug manufacturing units but also for the detection of its impurities in pharmaceutical formulations. Three unknown impurities were consistently observed during the analysis of different batches of citalopram. Forced degradation of citalopram was carried out under thermal, photo, acidic, alkaline, and peroxide conditions. The degradation products and unknown impurities were isolated and characterized by ESI-MS/MS, (1)H NMR, and FT-IR spectroscopy.     

Liquid-chromatographic separation and determination of process-related impurities, including a regio-specific isomer of celecoxib on reversed-phase C18 column dynamically coated with hexamethyldisilazane.

A simple and rapid reversed-phase high-performance liquid-chromatographic method for the separation and determination of process-related impurities of celecoxib (CXB) in bulk drugs and pharmaceuticals was developed. The separation of impurities viz., 4-methylacetophenone (I), 1-(4-methylphenyl)-4,4,4-trifluorobutane-1,3-dione (II), 4-hydrazinobenzene sulfonamide (III) and a regio-specific isomer [3-(4-methylphenyl)-5-trifluoromethyl-1H-pyrazole-1-yl]-benzenesulfonamide (IV), was accomplished on an Inertsil ODS-3 column dynamically coated with 0.1% hexamethyldisilazane (HMDS) in acetonitrile:water (55:45 v/v) as a mobile phase and detection at 242 nm using PDA at ambient temperature. The chromatographic conditions were optimized by studying the effects of HMDS, an organic modifier, time of silanization and column temperature. The method was validated and found to be suitable not only for monitoring the synthetic reactions, but also to evaluate the quality of CXB.     

高效液相色谱-串联质谱法分离鉴定绿原酸及其相关杂质

建立了高效液相色谱-串联质谱法（HPLC-MS/MS)分离和鉴定绿原酸及其相关杂质的方法。采用C18色谱柱(5 μm,4.6 mm×150 mm),乙腈-水（含0.1%甲酸）(体积比为8∶92)为流动相,经HPLC-MS/MS和HPLC-二极管阵列检测器在线检测,对工业绿原酸中的奎尼酸、咖啡酸、绿原酸同分异构体等8个相关杂质的结构进行了鉴定。     

Development and validation of a reversed-phase liquid chromatographic method for analysis of demeclocycline and related impurities

A simple, robust, and rapid reversedphase high-performance liquid chromatographic method for the analysis of demeclocycline and its impurities is described. Chromatographic separations were achieved on a Symmetry Shield RP8 (75 mm × 4.6 mm, 3.5 μm) column kept at 40°C. The mobile phase was a gradient mixture of acetonitrile, 0.06 M sodium edetate (pH 7.5), 0.06 M tetrapropylammonium hydrogen sulphate (pH 7.5) and water, A (2:35:35:28 v/v/v/v) and B (30:35:35:0 v/v/v/v) pumped at a flow rate of 1 mL/min. UV detection was performed at 280 nm. The developed method was validated according to the ICH guidelines for specificity, limit of detection, limit of quantification, linearity, precision, and robustness. An experimental design was applied for robustness study. Results show that the peak shape, chromatographic resolution between the impurities, and the total analysis time are satisfactory and better than previous methods. The method has been applied for the analysis of commercial demeclocycline bulk samples available on the market.     

在线二维液相色谱-四极杆飞行时间质谱法检测头孢噻吩钠的杂质谱

建立了在线二维液相色谱-四极杆飞行时间质谱检测头孢噻吩钠杂质谱的方法,有效地解决了流动相中含不挥发性磷酸盐的色谱系统不适合用于液相色谱-质谱快速鉴定杂质的难题。一维高效液相色谱(HPLC)以Symmetry C18为色谱柱,以磷酸盐缓冲液(pH 2.5)和乙腈梯度洗脱;二维以ACQUITY UPLC BEH C18为色谱柱,以0.1%(v/v)甲酸水溶液和0.1%(v/v)甲酸乙腈溶液梯度洗脱。以HLB C18为捕集柱,用0.1%(v/v)甲酸水溶液进行捕集和脱盐,采用正离子模式采集数据。对头孢噻吩钠中6个杂质进行了结构鉴定,对其来源进行了分析,并进一步确证了《中国药典》2010年版对头孢噻吩钠杂质A认定有误。采用本方法可以快速、简便、灵敏地对头孢噻吩钠杂质谱进行检测。     

Quality assessment for tramadol in pharmaceutical preparations with thin layer chromatography and densitometry

Research studies have been carried out to develop a chromatographic and densitometric method suitable for identification and determination of tramadol and impurities. In addition, the stability of tramadol in solutions was investigated, including an effect of solution pH, temperature and incubation time. In the first instance the conditions for identification and quantitative determination of tramadol and impurities in pharmaceutical preparations were established. The separation was performed on silica gel-coated chromatographic plates (HPTLC) using two mobile phases: (I) chloroform-methanol-glacial acetic acid (9:2:0.1, v/v/v); (II) chloroform-toluene-ethanol (9:8:1, v/v/v). The UV densitometry was carried out at lambda = 270 nm. The developed method is of high sensitivity and low detection and determination limits ranging from 0.044 to 0.35 microg. For individual constituents the recovery ranges from 93.23 to 99.66%. The next step was to evaluate the stability of tramadol and determine a method of decomposition under various experimental conditions. It was found that tramadol decomposes in various ways in acidic and basic environments producing (1RS)-[2-(3-methoxyphenyl)cyclohex-2-enyl]-N,N-dimethylmethanamine (imp. B) and (1RS, 2RS)-2-[(dimethylamino)methyl]-1-(3-methoxyphenyl)cyclohexanol (imp. cis-T) or imp. cis-T, respectively.     

Preparative separation and determination of matrine from the Chinese medicinal plant <Emphasis Type="Italic"> Sophora flavescens </Emphasis>Ait by molecularly imprinted solid-phase extraction

Molecularly imprinted microspheres (MIMs) were synthesized by micro-suspension polymerization using matrine (MT) as template. The MIMs were employed for solid-phase extraction (SPE) and as chromatographic stationary phase for the determination of MT from the Chinese medicinal plant Sophora flavescens. The effects of the various eluents, their concentrations and volumes on the retention behavior were investigated. The selectivity and capacity of the imprinted microspheres against MT was also discussed. The results showed that the MIMs exhibited stronger specific affinity to MT than to oxymatrine (OMT). Methanol-water (3:7, v/v) was used for washing impurities from the MIMs-SPE cartridge loaded with the herb extracts, while methanol-glacial acetic acid (9:1, v/v) was used for eluting MT. The maximum load of MT and the recovery of MIMs cartridge towards MT were 38.7 microg g(-1) and 71.4%, respectively. The method developed might be used to separate and extract effective constituents from Chinese medicinal plants on a large scale.     

TLC chromatographic-densitometric assay of ibuprofen and its impurities

A simple and sensitive thin-layer chromatographic (TLC)-densitometric method for the quantitative estimation of S(+)-2-[4-isobutylphenyl]propionic acid (ibuprofen) and its impurities in pharmaceutical preparations has been developed. The chromatographic separation was carried out on silica gel 60 F(254) TLC plates using toluene-ethyl acetate-glacial acetic acid (17:13: 1, v/v/v) as the mobile phase. Detection was carried out densitometrically with a UV detector. The developed method has detection and quantitation limits ranging from 0.13 μg per spot to 0.72 μg per spot. For individual constituents the recovery ranged from 96.8% to 99.0%. In addition, the stability of ibuprofen solutions was investigated, including the effect of pH, temperature, and incubation time. The method is rapid, simple, and suitable for routine quality-control analysis of pharmaceuticals containing ibuprofen.     

Development and Validation of a Stability-Indicating LC Method for Determination of Bexarotene in Softgel Dosage Formulation

This study focuses on a novel liquid chromatographic approach that has been developed and approved for the quantitative determination of bexarotene (BXT), its potential impurities in drug substances and drug products. Chromatographic separation was developed on a Symmetry C₈ (150 × 4.6) mm 5-µm column with a mobile phase containing an isocratic mixture of acetonitrile:DI water:glacial acetic acid (650:350:7.5) v/v/v at a flow rate of 1.2 mL min^?1, and quantitation was carried out using ultraviolet detection at 262 nm for BXT and 290 nm for BHA with a column temperature of 35 °C. The resolution among butylated hydroxyanisole (BHA), BXT and its process-related impurity-A was found to be greater than 5. Regression analysis confers an R value (correlation coefficient) higher than 0.998 for BHA, BXT and impurity-A. The detection level for BXT impurities was found at a level below 0.03% (0.18 µg mL^?1). The inter- and intra-day precisions for BHA, BXT and impurities were evaluated and found to have a %RSD of less than 3.0.     

Micellar electrokinetic and high-performance liquid chromatographic determination of potential manufacturing impurities in pholcodine

Quantitative high-performance liquid chromatographic (HPLC) and micellar electrokinetic chromatographic (MEKC) methods have been developed for the determination of four structurally related potential manufacturing impurities, including morphine, of the opiate derivative pholcodine. Pholcodine and the four impurities were separated by MEKC in less than 14 min using a 70 cm x 75 microm I.D. uncoated fused-silica capillary (25 kV at 30 degrees C) and a running buffer consisting of 10% acetonitrile (v/v) in 20 mM borate-phosphate buffer pH 8.0 containing 40 mM sodium dodecyl sulphate (SDS). The MEKC method was compared to a HPLC method using a 5 microm Luna phenyl-hexyl column (150 x 4.6 mm I.D.) eluted with a mobile phase consisting of a mixture of 10% (v/v) acetonitrile, 7% (v/v) tetrahydrofuran in 20 mM phosphate buffer pH 8.0. Both methods were fully validated and a comparison was made regarding selectivity, linearity, precision, robustness and limits of detection and quantitation. The presence of the impurities in different samples of pholcodine drug substance was investigated using both methods.     

Development and validation of a reversed-phase HPLC method for monitoring of synthetic reactions during the manufacture of a key intermediate of an anti-hypertensive drug

A reversed-phase high-performance liquid-chromatographic method for monitoring of reactions involved in process development of a key intermediate of antihypertensive drugs, e.g, doxazosin mesylate, prazosin, alfuzosin, terazosin, etc., has been developed and validated. The HPLC profiles of impurities of 4-amino-2-chloro-6,7-dimethoxyquinazoline were used as fingerprints to follow the synthetic procedures in the manufacturing unit. The separation was accomplished on an Inertsil ODS-3 column with isocratic elution using acetonitrile-ammonium acetate (10 mM; pH 4.0; 50:50 v/v) as mobile phase and a photodiode array detector set at 240 nm at ambient temperature. The method was validated with respect to accuracy, precision, linearity, and limits of detection and quantification. The method could detect the impurities at a level of 0.01 to 0.20 microg/mL and it was found to be suitable not only for monitoring of reactions but also for quality assurance of 4-amino-2-chloro-6,7-dimethoxyquinazoline.     

Impurity profiling high-performance-thin-layer chromatography method involving the assay of essential human micronutrient niacin with eco-scale assessment

Currently, analytical scientists are paying special attention to reducing reliance on hazardous chemicals in various analytical methods. By embracing this concept, we developed an eco-friendly high-performancethin-layer chromatography (HPTLC) method as an alternative for the conventional HPLC method for the determination of an essential human micronutrient, niacin (NIA), which is used improve the lipid profile of patients. Furthermore, the proposed HPTLC method is capable of determining the structurally related impurities of NIA such as pyridine-2,5-dicarboxylic acid, isonicotinic acid, pyridine, and 5-ethyl-2-methylpyridine, which exhibit nephrotoxic and hepatotoxic effects. The separation of this challenging mixture was achieved on HPTLC sheets using a mixture of ethyl acetate/ethanol/ammonia solution (6:4:0.05, v/v/v), and then the dried plates were scanned at 254 nm. The analytical eco-scale assessment protocol was used to assess the greenness profile of the presented method and compare it with the reported HPLC method. The suggested method was found to be greener with regard to the consumption of solvents and the yielding of waste. The results suggest that the described method can be safely implemented for the routine analysis of NIA pharmaceutical dosage without the interference of potential impurities in quality control laboratories.     

Favipiravir (SARS-CoV-2) degradation impurities: Identification and route of degradation mechanism in the finished solid dosage form using LC/LC–MS method

Favipiravir finished dosage was approved for emergency use in many countries to treat SARS-CoV-2 patients. A specific, accurate, linear, robust, simple, and stability-indicating HPLC method was developed and validated for the determination of degradation impurities present in favipiravir film-coated tablets. The separation of all impurities was achieved from the stationary phase (Inert sustain AQ-C18, 250 × 4.6 mm, 5-μm particle) and mobile phase. Mobile phase A contained KH₂PO₄ buffer (pH 2.5 ± 0.05) and acetonitrile in the ratio of 98:2 (v/v), and mobile phase B contained water and acetonitrile in the ratio of 50:50 (v/v). The chromatographic conditions were optimized as follows: flow rate, 0.7 mL/min; UV detection, 210 nm; injection volume, 20 μL; and column temperature, 33°C. The proposed method was validated per the current International Conference on Harmonization Q2 (R1) guidelines. The recovery study and linearity ranges were established from the limit of quantification to 150% optimal concentrations. The method validation results were found to be between 98.6 and 106.2% for recovery and r² = 0.9995–0.9999 for linearity of all identified impurities. The method precision results were achieved below 5% of relative standard deviation. Forced degradation studies were performed in chemical and physical stress conditions. The compound was sensitive to chemical stress conditions. During the study, the analyte degraded and converted to unknown degradation impurities, and its molecular mass was found using the LC–MS technique and established degradation pathways supported by reaction of mechanism. The developed method was found to be suitable for routine analysis of research and development and quality control.