First-principle study of interaction of molecular hydrogen with BC<Subscript>3</Subscript> composite single-walled nanotube

The physisorption of molecular hydrogen in BC₃ composite single-walled nanotube, investigated using density functional theory, was compared with single-walled carbon nanotube. Both external and internal adsorption sites of these two nanotubes have been studied with the hydrogen molecular axis oriented parallel to the nanotube wall. The calculated results show that: ([see full textsee full text]) the physisorption energies of a H₂ molecule are larger for BC₃(8,0) composite nanotube than for C(8,0) nanotube at all adsorption sites examined. ([see full textsee full text]) For these two nanotubes, the physisorption energies are larger for hydrogen bound inside the nanotubes than for adsorption outside the nanotubes. The different behavior between these two nanotubes is explained by the contour plots of electron density and charge-density difference of them. The present computations suggest that BC₃ nanotube may be a better candidate for hydrogen storage than carbon nanotube.     

单壁碳纳米管低温及常温下储氢行为的模拟计算研究

采用巨正则系综蒙特卡罗方法, 通过含有此方法模块的GULP软件, 系统地研究了扶手椅式单壁碳纳米管在低温和常温下的储氢性能, 给出了5种半径的扶手椅管在液氮温度(77 K)和常温(280 K)下的吸附等温线, 同一管径在不同温度不同压强下氢分子在碳纳米管中的分布构型图等. 对77 K和280 K下不同压强不同管径的碳纳米管储氢能力做了较为全面的对比分析, 最后根据模拟计算的结果, 对碳纳米管储氢能力的强化提出了一些建设性意见.     

单壁BC3纳米管晶格动力学研究

基于力常数模型计算了一系列扶手椅型、锯齿型和手性单壁BC₃纳米管的声子色散关系.描述了单壁BC₃纳米管结构的表征方式,比较详细地给出了其结构、对称性和晶格动力学分析.基于数值计算结果,讨论了拉曼活性模和红外活性振动模的频率与管径的关系.由分析结果做出推断,BC₃纳米管的拉曼光谱和红外光谱比单壁碳纳米管更为复杂. 关键词： 3纳米管')" href="#">BC₃纳米管 声子色散关系 晶格动力学     

Study of titanium adsorption on perfect and defected BC3 nanotubes using density functional theory

Density functional theory calculations were used to study the titanium (Ti) adsorption on perfect and defected (4, 0) BC₃ nanotubes, considering Stone–Wales and vacancy defects. The binding energy values for these nanotubes were larger than the corresponding values for carbon nanotubes. The charge transfer from the Ti atom to nanotube was observed for all systems studied. The most exothermic binding process occurred for the Ti adsorption on a native V_B defect, which showed minimum structural deformation with respect to a perfect BC₃ tube. In the case of a nanotube with a reconstructed carbon vacancy, the adsorption of Ti generated a half-metallic anti-ferromagnet. The results obtained in this paper are relevant for spintronics and hydrogen adsorption applications.     

Grand canonical Monte Carlo simulations of hydrogen adsorption in carbon cones

The Monte Carlo method in its grand ensemble variant (GCMC) is used in order to study the hydrogen adsorption (77 K) characteristics of novel carbon structures, namely Carbon Cones (CCs). CCs are conical shaped curved graphitic sheets, with five different apex angles. CC structures with correct bonding topology were developed via atomistic-molecular simulations, while GCMC simulations of hydrogen adsorption were carried out on the five different apex angle structures. Emphasis has been given on the adsorption properties inside the cones and it was found that cone tips are characterized by enhanced adsorbability. The results were also compared with similar calculations on carbon nanotubes.     

Hydrogen adsorption on N-decorated single wall carbon nanotubes

Using density functional theory and molecular dynamics we found that N-decorated single walled (8,0) carbon nanotubes are potential high capacity hydrogen storage media. This system could store up to 6.0 wt% hydrogen at 300 K and ambient pressure, with average adsorption energy of −80 meV/(H₂). Nitrogen coverage was C₈N.     

BC3复合纳米管的储氢性能研究

采用巨正则蒙特卡罗方法（GCMC）研究了BC3复合纳米管的物理吸附储氢性能,获得了该纳米管在不同温度和压强下的吸附等温线,及其在不同条件下的物理储氢吸附量,并和相应的碳纳米管进行了对比研究。结果表明,BC3纳米管在所有条件下的储氢性能均优于相应的碳纳米管,因而它是一种比碳纳米管更强的氢存储介质,并从纳米管和H2分子以及H2分子和H2分子之间的平均总相互作用能的分布情况等因素出发解释了这两种纳米管有不同储氢行为的原因。     

Hydrogen storage in Li-doped fullerene-intercalated hexagonal boron nitrogen layers

New materials for hydrogen storage of Li-doped fullerene (C₂₀, C₂₈, C₃₆, C₅₀, C₆₀, C₇₀)-intercalated hexagonal boron nitrogen (h-BN) frameworks were designed by using density functional theory (DFT) calculations. First-principles molecular dynamics (MD) simulations showed that the structures of the C _n -BN (n = 20, 28, 36, 50, 60, and 70) frameworks were stable at room temperature. The interlayer distance of the h-BN layers was expanded to 9.96–13.59 Å by the intercalated fullerenes. The hydrogen storage capacities of these three-dimensional (3D) frameworks were studied using grand canonical Monte Carlo (GCMC) simulations. The GCMC results revealed that at 77 K and 100 bar (10 MPa), the C₅₀-BN framework exhibited the highest gravimetric hydrogen uptake of 6.86 wt% and volumetric hydrogen uptake of 58.01 g/L. Thus, the hydrogen uptake of the Li-doped C _n -intercalated h-BN frameworks was nearly double that of the non-doped framework at room temperature. Furthermore, the isosteric heats of adsorption were in the range of 10–21 kJ/mol, values that are suitable for adsorbing/desorbing the hydrogen molecules at room temperature. At 193 K (–80 °C) and 100 bar for the Li-doped C₅₀-BN framework, the gravimetric and volumetric uptakes of H₂ reached 3.72 wt% and 30.08 g/L, respectively.     

Molecular simulation of adsorption and transport diffusion of model fluids in carbon nanotubes

Grand canonical Monte Carlo (GCMC) and dual-control-volume grand canonical molecular dynamics (DCV-GCMD) simulations were carried out with Lennard-Jones model fluids in carbon nanotubes, with the objective of investigating the effect of varying molecular properties on adsorption and diffusion. The influence of the molecular weight, and the Lennard Jones parameters σ (a measure of the molecule size) and ? (a measure of the interaction strength) on adsorption isotherms, fluxes, and transport diffusivities was studied. For these simulations, the properties of component 1 in the mixture were held constant and one of the properties of component 2 was changed systematically. Furthermore, the validity of Graham's law, which relates the fluxes of two counter diffusing species to their molecular weight, was investigated on a molecular level. Graham's law is fulfilled for the whole range of molecular weights and Lennard-Jones parameters σ investigated. However, large deviations were observed for large values of ?₂. Here, the interaction of the two components in the mixture becomes so strong that component 1 is dragged along by component 2.     

Hydrogen adsorption and storage of Ca-decorated graphene with topological defects: A first-principles study

As a candidate for hydrogen storage medium, geometric stability and hydrogen capacity of Ca-decorated graphene with topological defects are investigated using the first-principle based on density functional theory (DFT), specifically for the experimentally realizable single carbon vacancy (SV), 585 double carbon vacancy (585 DCV) and 555–777 double carbon vacancy (555–777 DCV) defects. It is found that Ca atom can be stabilized on above defective graphenes since Ca׳s binding energy on vacancy defect is much larger than its cohesive energy. Up to six H₂ molecules can stably bind to a Ca atom on defective graphene with the average adsorption energies of 0.17–0.39 eV/H₂. The hybridization of the Ca-3d orbitals with H₂-σorbitals and the electrostatic interaction between the Ca cation and the induced H₂ dipole both contribute to the H₂ molecules binding. Double-side Ca-decorated graphene with 585 DCV and 555–777 DCV defects can theoretically reach a gravimetric capacity of 5.2 wt% hydrogen, indicating that Ca-decorated defective graphene can be used as a promising material for high density hydrogen storage.     

Review of hydrogen storage in inorganic fullerene-like nanotubes

Following the discovery of carbon nanotubes, inorganic fullerene-like nanotubes such as WS₂–MoS₂, NbS₂, TiS₂, and BN were reported. Inorganic (non-carbon) nanotubes constitute an important class of nanomaterials with interesting properties and potential applications. As known, efficient hydrogen storage is one key problem in the development of a hydrogen energy system. Hydrogen storage using carbon nanostructures is scientifically interesting and challenging. It thus would be worthwhile to look into hydrogen storage in inorganic nanotubes because the van der Waals gaps between the nanotube layers are potential candidates for hydrogen uptake. Furthermore, the inorganic nanotubes combine two elements, which is different from the pure carbon nanotubes. These may show a novel hydrogen adsorption–desorption mechanism. The present review provides a brief study of hydrogen adsorption on MoS₂, TiS₂, and BN nanotubes. PACS 81.07.De; 81.07.-b; 81.05.Tp; 68.43.-h     

H2的自由扩散和吸附状态的对比研究

运用巨正则Monte Carlo方法, 模拟了H₂在自由扩散状态下及碳纳米管吸附状态下的分布, 对H₂的自由扩散和吸附状态进行了对比研究. 研究表明: 77 K和2 MPa下, (30, 30)扶手椅型碳纳米管质量储氢密度为3.74%, 77 K和10 MPa下, 质量储氢密度为7.4%. 吸附状态的H₂分子主要汇聚在碳纳米管内外两个壁面. 关键词： 储氢 碳纳米管 巨正则Monte Carlo     

Enhancing the hydrogen storage capacity of Pd-functionalized multi-walled carbon nanotubes

We demonstrate that the hydrogen storage capacity of multi-walled carbon nanotubes can be enhanced by polyvinylpyrrolidone functionalization. The polyvinylpyrrolidone acts as a stabilizing agent for Pd-nanoparticles, reduces their size and facilitates their uniform and enhanced loading onto multi-walled carbon nanotubes. According to sorption studies, the polyvinylpyrrolidone capping and consequent nanostructural modification enables 2.3 times more hydrogen adsorption than mere Pd-functionalization of multi-walled carbon nanotubes. Corresponding morphological changes before and after polyvinylpyrrolidone capping, characterized using Raman Spectroscopy, X-ray diffraction, TEM and thermal analysis techniques, are also presented. The results contribute towards increasing the efficiency of hydrogen based sustainable energy sources.     

多壁碳纳米管储氢的物理吸附特性

采用巨正则蒙特卡罗方法 ,模拟常温、1 0MPa下氢在扶手椅型多壁壁碳纳米管中的物理吸附过程 .氢分子之间、氢分子与碳原子之间的相互作用采用Lennard Jones势能模型 .研究了双壁碳纳米管外 (内 )径固定而内 (外 )径改变时的物理吸附储氢情况 ,发现氢分子主要储存在双壁碳纳米管的管壁附近 ,当双壁碳纳米管的内外管壁间距由 0 .34nm增大到 0 .6 1或 0 .88nm时可有效增加物理吸附储氢量 ,并给出了相应的理论解释 .在此基础上 ,计算了管壁间距为 0 .34、0 .6 1和 0 .88nm时的三壁碳纳米管的物理吸附储氢量 ,并与相同条件下单壁和双壁碳纳米管的物理吸附储氢量作了比较 ,发现多壁碳纳米管的物理吸附储氢量随碳管层数的增加而减小 .     

Adsorption and interfacial phenomena of a Lennard-Jones fluid adsorbed in slit pores: DFT and GCMC simulations

ABSTRACT

Confinement of fluids in porous media leads to the presence of solid–fluid (SF) interfaces that play a key role in many different fields. The experimental characterisation of SF interfacial properties, in particular the surface tension, is challenging or not accessible. In this work, we apply mean-field density functional theory (DFT) to determine the surface tension and also density profile of a Lennard-Jones fluid in slit-shaped pores for realistic amounts of adsorbed molecules. We consider the pore walls to interact with fluid molecules through the well-known 10-4-3 Steele potential. The results are compared with those obtained from Monte Carlo simulations in the Grand Canonical Ensemble (GCMC) using the test-area method. We analyse the effect on the adsorption and interfacial phenomena of volume and energy factors, in particular, the pore diameter and the ratio between SF and fluid–fluid dispersive energy parameters, respectively. Results from DFT and GCMC simulations were found to be comparable, which points to their reliability.     

Monte Carlo simulation of carbon monoxide,carbon dioxide and methane adsorption on activated carbon

In this study, the adsorption capacity of pure and activated carbon with regard to carbon monoxide (CO), carbon dioxide (CO₂) and methane (CH₄) gases at 298?K and pressure from 0.01 up to 2.0?MPa has been investigated computationally. Computational work refers to Monte Carlo (MC) simulation of each adsorbed gas on a graphite model with varying density of activation sites. The Grand Canonical Monte Carlo (GCMC) simulation technique was employed to obtain the uptake of each adsorbed gas by considering a graphite model of parallel sheets activated by carboxyl and hydroxyl groups, as observed experimentally. The simulation adsorption data for these gases within the examined carbon pore material are presented and discussed in terms of the adsorbate fluid molecular characteristics and corresponding interactions between adsorbate species and adsorbent material. We found that the simulated adsorption uptake of the examined graphite model under these conditions with regard to the aforementioned fluids increases in the order CO?<?CH₄?<?CO₂.     

Hydrogen adsorption on activated carbon nanotubes with an atomic-sized vanadium catalyst investigated by electrical resistance measurements

Activated multi-walled carbon nanotubes were prepared with appended vanadium as a hydrogen storage medium. The pore structure was significantly improved by an activation process that was studied using Raman spectroscopy, field emission transmission electron microscopy and pore analysis techniques. X-ray photoelectron spectroscopy and X-ray diffraction results reveal that the vanadium catalyst was introduced into the carbon nanotubes in controlled proportions, forming V₈C₇. The improved pore structure functioned as a path through the carbon nanotubes that encouraged hydrogen molecule adsorption, and the introduced vanadium catalyst led to high levels of hydrogen storage through the dissociation of hydrogen molecules via the spill-over phenomenon. The hydrogen storage behavior was investigated by electrical resistance measurements for the hydrogen adsorbed on a prepared sample. The proposed mechanism of hydrogen storage suggests that the vanadium catalyst increases not only the amount of hydrogen that is stored but also the speed at which it is stored. A hydrogen storage capacity of 2.26 wt.% was achieved with the activation effects and the vanadium catalyst at 30 °C and 10 MPa.     

单壁BN纳米管和碳纳米管物理吸附储氢性能的理论对比研究

采用巨正则蒙特卡罗方法(GCMC)研究了单壁氮化硼纳米管(SWBNNTs)和单壁碳纳米管(SWCNTs)的物理吸附储氢性能,主要对比研究了纳米管的管径、温度和手性对二者物理吸附储氢量的影响. 研究结果表明：在低温下,SWBNNTs的物理吸附储氢性能优于相应的SWCNTs;但是随着温度的升高,二者的物理吸附储氢性能差别越来越小,在常温下,SWBNNTs不具备有比SWCNTs更强的物理吸附储氢性能,而是和相同条件下的SWCNTs相差不大,只是在高压下的物理吸附储氢量稍稍大于SWCNTs,并给出了合理的理论解释 关键词： 巨正则蒙特卡罗方法(GCMC) 单壁氮化硼纳米管(SWBNNTs) 单壁碳纳米管(SWCNTs) 储氢     

拉伸形变下BC3纳米管的能带结构

运用紧束缚能带理论,研究拉伸形变下BC₃纳米管的能带结构. 研究表明:随着拉伸和压缩强度的不断增加,BC₃纳米管的导带能级和价带能级逐渐靠近,最终发生能带交叠. 压缩形变下能带的交叠程度可达05 eV,而拉伸形变下只有02 eV. 对于扶手椅型BC₃纳米管,随着拉伸和压缩的不断增加,BC₃纳米管首先由直接半导体转化为间接半导体,进而发生能带的交叠,表现出金属性. 在无形变时,扶手椅型BC₃纳米 关键词： 3纳米管')" href="#">BC₃纳米管 能隙 拉伸形变 半导体     

真空热处理碳纳米管的储氢性能研究

研究了真空热处理对多壁碳纳米管(MWNTs)电化学储氢性能的影响.采用化学气相沉积法(CVD)制备碳纳米管，碳纳米管与LaNi₅储氢合金按质量比1∶10混合，制作成CNTs-LaNi₅电极.电解池采用三电极体系，6mol/L KOH为电解液，Ni(OH)₂为正极，Hg/HgO为参比电极.实验结果表明，在相同的充放电条件下，850℃时CNTs-LaNi₅电极的储氢性能最好，克容量最大为503.6mAh/g，相应的平台电压高达1.18V.从500—850℃随着温度升高，放电量有较大幅度的增加，但到950℃时放电量反而下降.由此可见，碳纳米管的热处理温度对碳纳米管的电化学储氢性能有着较大的影响. 关键词： 碳纳米管(CNTs) 储氢性能 5合金')" href="#">LaNi₅合金 化学气相沉积法(CVD法)