氮化钽团簇阴离子Ta3N3-解离吸附N2中的15N/14N同位素交换研究

氮气分子的吸附和活化是固氮研究中的重要过程. 近年来过渡金属氮化物由于在合成氨催化研究中的优异表现而受到广泛关注. 但是,氮化物物种与氮气分子在高温下反应的微观机制仍然不清楚,而该过程对于认识反应中的温度效应以及缩小气相团簇体系和凝聚相体系间的差距具有重要意义. 本文使用质谱观测到氮化钽团簇阴离子Ta₃¹⁴N₃^-和¹⁵N₂在高温下(393∽593 K)发生¹⁵N/¹⁴N同位素交换而产生¹⁴N₂/¹⁵N¹⁴N. 结合理论计算,阐述了同位素交换反应的微观机理以及升高温度对于N₂在Ta₃N₃^-上解离吸附的促进作用. 而在对比实验体系Ta₃¹⁴N₄^-/¹⁵N₂中,观察到升高温度只能加速¹⁵N₂在吸附产物Ta₃¹⁴N₄¹⁵N₂^-上的脱附. 这是由于氮空位是氮化物物种活化氮气的必要条件,而Ta₃N₄^-中由于不存在氮空位因此不能活化和解离氮气. 该研究为合成氨中氮化物物种中氮空位的作用提供了重要信息并且为固氮研究中高效催化剂的设计提供了线索.     

合成氨钌催化剂的晶体和形貌敏感性

哈伯-博施法合成氨反应是高温高压的耗能过程,因此降低该过程的能量消耗及开发温和条件下合成氨反应催化剂具有重要意义. 金属钌是合成氨反应中最有前途的催化剂之一,一直备受广泛关注. 确定金属钌催化剂的结构敏感性并提高其比质量活性是多相催化中亟待解决的重要问题. 氮气(N₂)活化是合成氨反应中的关键步骤. 本文通过第一性原理理论计算和微观动力学模拟方法系统研究了具有六方密排和面心立方晶体结构的钌催化剂上N₂活化过程和N₂解离反应速率. 理论计算研究表明,在六方密排Ru形貌中,{2130}晶面具有最高的N₂解离活性,其次是{0001}台阶面,它们比六方密排Ru其他表面上N₂解离反应速率高3个数量级以上;在面心立方Ru形貌中,{211}和{311}表面上N₂解离活性最高. 这些结果都表明台阶面/台阶位对氮气活化至关重要. 虽然六方密排Ru {2130}晶面具有最低的N₂解离能垒,然而由于面心立方Ru上可以暴露更高密度的活性位点,使得面心立方Ru比六方密排Ru具有更高的N₂转化速率. 本研究深入理解了N₂解离过程中,金属Ru 催化剂形貌和晶相结构敏感性,这为设计和优化高活性的合成氨Ru催化剂提供了理论基础.     

TiO2表面氧空位对NO分子吸附的作用

采用程序升温热脱附(TPD)实验方法测定了NO在TiO₂表面吸附后的脱附谱，利用 分子轨道 理论研究了TiO₂吸附NO的原子簇模型及吸附前后的原子簇能级变化.结果表明， NO在TiO₂表面吸附后可在两个峰值温度450 和980 K脱附出N₂.TiO ₂表面经预覆氧处理后，N₂ 的脱附量降低.吸附时NO中的O能够占据TiO₂表面氧空位并与N脱离，而N原子则 相互结合成 为N₂脱附.分子轨道理论计算证明在TiO₂(110)表面能够存在氧空位 并具备吸附NO的结构条件.     

B12N12纳米笼：潜在的二氧化氮检测传感器

利用密度泛函理论通过计算吸附能量、HOMO/LUMO能隙变化、电荷转移、结构扭曲等研究二氧化氮分子在B12N12纳米笼的吸附．此外,通过计算B₁₂N₁₂的电子结合能、Gibbs自由能、态密度和分子表面的静电势研究其稳定性和其它特性．B₁₂N₁₂纳米笼吸附二氧化氮显示三种构型．B₁₂N₁₂团簇的HOMO/LUMO能隙变化对二氧化氮分子的存在非常敏感,从自由团簇的6.84 eV降为NO₂/团簇稳定团簇的3.23 eV．团簇的导电性被极大地提高,表明B₁₂N₁₂纳米簇可能是潜在的二氧化氮气体分子检测传感器.     

N+ND反应的量子力学速率常数

在两个耦合的势能面1²A′和2²A′上对N+ND反应进行了非绝热量子动力学研究. 计算了N+ND→N₂+D反应和N′+ND→N′D+N反应在5 meV～1.0 eV碰撞能的反应几率和积分截面. 结果发现N+ND→N₂+D反应是N+ND反应的主要反应通道.另外,计算了N+ND→N₂+D 反应的速率常数.     

甲醇在Pt (100)表面吸附与解离的第一性原理研究.

采用基于第一性原理的密度泛函理论结合周期模型方法对甲醇在Pt(100)完整表面的吸附与解离进行了研究. 通过比较不同吸附位置的吸附能与构型参数发现,表面top吸附位为最稳定吸附位,甲醇分子通过氧原子吸附于Pt(100)表面. 同时计算了甲醇分子在top吸附位可能的解离路径,发现在解离过程中OH键首先断裂的路径为最低能量路径. 分解生成的若干产物其吸附稳定性排序为CH₃O>CH₂OH>CH₃>CH₂O.     

利用时间切片离子速度成像技术对AlO在193 nm的光解反应动力学研究

本文利用时间切片离子速度成像技术对AlO分子在193 nm下的光解反应动力学进行了研究. 实验通过产物Al⁺的离子速度和角度分布分析，发现了两个光解离反应通道，分别为中性AlO分子的单光子解离生成产物Al(²P_u)+O(³P_g)的通道，和AlO分子吸收两个光子电离产生AlO⁺进而解离生成产物为Al⁺(¹S_g)+O(³P_g)的反应通道. 每一个解离通道包括了AlO(v=0∽2)振动态的贡献，其中中性解离反应通道与离子解离反应通道相比，产物的各向异性参数对AlO的振动态依赖更大.     

振动和转动激发对N2在Fe(111)表面解离吸附的影响

N₂的解离化学吸附是工业合成氨的速控步骤. 基于最近构建的六维势能面,本文研究了N₂的初始振动激发和转动激发在Fe(111)表面的反应性的作用. 由于该反应具有重要的量子效应,通过六维量子动力学计算研究了入射能量低于1.6 eV 时振动激发的效应. 并采用准经典轨线计算揭示了高入射能量下的振动和转动激发的影响. 通过这些研究发现增加平动能量在一定程度上能提高解离几率,振动激发或转动激发能更有效地促进解离. 这项研究为重原子分子-表面反应的模式特异性动力学提供了有价值的见解.     

高分辨的一氧化二氮光解离实验研究

利用"时间切片"离子速度成像技术研究了N₂O分子在134.20、135.20和136.43 nm波长下的真空紫外光解动力学. 实验中通过采集解离产物O(¹S_J=0)的离子影像来研究O(¹S_J=0)+N₂(X¹∑_g⁺)这一解离通道. 从各个波长下的实验影像可获得产物N₂(X¹∑_g⁺)的振动态分辨的结构,进而得到产物的总平动能谱和产物N₂的振动态布居. 实验结果表明在实验的光解波长下,产物N₂(X¹∑_g⁺)主要布居在v=2和v=3. 此外,还得到了产物N₂的振动态分辨的各向异性参数β,从中发现产物N₂的β值在三个解离波长下均表现出相似的特征,即随着振动量子数的增大,β值从趋近于2逐渐减小至1.4. 这一现象表明低振动态产物是通过一个以平行跃迁解离为主的解离过程产生的,而高振动态的产物来自于一个更加弯曲的中间构型的解离. 此推论与在平动能谱中所见到的最强转动态布居随着振动量子数的增大而出现的位移是相一致的.     

三甲基镓在Pd(111)表面吸附解离及表面预吸附H和O的影响

利用X-射线光电子能谱（XPS）和程序升温脱附谱（TPD）研究了三甲基镓在Pd（111）表面的吸附和解离行为,并考察了表面预吸附H和O的影响。结果表明,在吸附温度为140 K时,三甲基镓在Pd（111）上主要为解离吸附,此时表面物种为Ga（CH₃）_x （x=1,2,3）和CH_x物种。加热将导致Ga的甲基化合物中的Ga-C键发生分步断裂,在不同温度下产生CH₄和H₂从表面脱附。同时,XPS结果证实了在275~325 K的温度区间内存在Ga甲基化合物的分子脱附。退火至更高温度,表面只观察到积碳和金属Ga物种,这二者随着温度的继续升高逐渐向体相扩散。在Pd（111）表面预吸附O和H对上述吸附和解离行为存在显著的影响。当表面预吸附H时,脱附产物CH₄和H₂的脱附主要位于315 K,可归属为一甲基镓的解离脱附。当表面预吸附O时,只在258 K观察到CH₄和H₂的脱附峰,可能来自于Pd-O-Ga（CH₃）₂吸附结构的解离.     

Guided-Wave Two-Dimensional Acousto-Optic Scanner Using Proton-Exchanged Lithium Niobate Waveguide

Two-dimensional scanning of a 0.6328 mum guided-light beam has been realized using noncolinear acousto-optic (AO) coplanar Bragg diffraction together with colinear AO guided-mode to substrate radiation-mode conversion in a Z-cut Xpropagation LiNbO3 proton-exchanged (PE) waveguide. The two surface acoustic (SAW) waves utilized are at the center frequencies of 500 and 200 MHz, propagating in the Y and X axes, respectively. Two-dimensional scanning of approximately 720 resolvable light beam spots, namely, 18 40 (horizontal vertical) scanning, has been demonstrated using a light beam of 1.0 mm aperture. The total number of resolvable beam spots can be greatly increased from 720 by simply utilizing SAW transducers of larger bandwidth and a light beam of greater aperture. It should also be possible to significantly increase the diffraction efficiency from 3 % by optimizing the parameters of the PE waveguide and the SAWs.     

Femtosecond Transform-Limited Pulse Generation by Compensating for the Linear Chirp of SPM Spectra in Dispersion Shifted Fibers

A simple technique of pulse compression, based on the linear chirp compensation of self-phase modulation (SPM) spectra in dispersion shifted fibers, is demonstrated. The optimization procedure is carried out, for a short span of a single-mode fiber, using a parabolic law, which describes the behavior of the squared output pulse width versus the pump peak power in the case of Gaussian pulses. The experimental results give a minimum pulse duration of 233 fs, which is in good agreement with the model. Shorter and coherent pulses, down to 90 fs, have been obtained by inserting an interference filter at the optical output.     

Effect ofγ-radiation on the spectral luminescence characteristics of impure cadmium tungstate crystals

Results of a study of the effect of γ-radiation on the spectral luminescence properties of cadmium tungstate crystals doped with silver, bismuth, and molybdenum cations are presented. Spectral characteristics of the nondnnnoped crystals are briefly described. Absorption and photo and X-ray luminescence spectra of the crystals taken before and after exposure to γ-radiation (5.5·10⁴ Gy) are compared. It is found that the spectral characteristics of the crystals doped with silver, bismuth, and molybdenum cations do not change markedly after the exposure. The relation between the type of impurity-induced defects, individual characteristics of the impurity cations, and the character of the effect of γ-radiation on the spectral luminescence properties of impure crystals is analyzed (preliminarily). Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 64, No. 1, pp. 55–60, January–February, 1997.     

Theoretical analysis and simulation of conjugate heights for dual-conjugate AO system in lidar

A multi-conjugate adaptive optics （MCAO） can offer a possibility of widening field of view （FOV） characterized by the isoplanatic angle, and the choose of conjugate height becomes a basic problem for MCAO, which influences the size of iosplanatic angle. Considering the application of lidar, the isoplanatic angle＇s expressions of two deformable mirrors （DMs） MCAO for uplink and downlink are deduced. The effects of conjugate heights for dual-conjugate AO are thoughtfully discussed, and the isoplanatic angles are further analyzed. The results show that the isopanatic angle varies with the conjugate height and reaches the maximum as the conjugate height is at the optimal altitude. Moreover, the optimal conjugate height changes with the propagation distance.     

Quick single-photon detector with many avalanche photo diodes working on the time division

Due to the limit of response speed of the present single-photon detector, the code rate is still too low to come into practical use for the present quantum key distribution (QKD) system.A new idea is put up to design a quick single-photon detector.This quick single-photon detector is composed of a multi-port optic-fiber splitter and many avalanche photo diodes (APDs).Au of the ports with APDs work on the time division and cooperate with a logic discriminating and deciding unit driven by the clock signal.The operation frequency lies on the number N of ports, and can reach N times of the conventional single-photon detector.The single-photon prompt detection can come true for high repetition-rate pulses.The applying of this detector will largely raise the code rate of the QKD, and boost the commercial use.     

Sorting of bending magnets for the SSRF booster

The Shanghai Synchrotron Radiation Facility(SSRF)booster ring,a full energy injector for the storage ring,is deigned to accelerate the electron beam energy from 150MeV to 3.5GeV that demands high extraction efficiency at the extraction energy with low beam loss rate when electrons are ramping.Closed orbit distortion(COD)caused by bending magnet field uniformity errors which affects the machine performance harmfully could be effectively reduced by bending magnet location sorting.Considering the affections of random errors in measurement,both ideal sorting and realistic sorting are studied based on measured bending magnet field uniformity errors and one reasonable combination of bending magnets which can reduce the horizontal COD by a factor of 5is given as the final installation sequence of the booster bending magnets in this paper.     

Improvement of four-wave mixing-based wavelength conversion efficiency in dispersion shifted fiber by 40-GHz clock pumping

40-GHz clock modulated signal as a pump to improve the efficiency of four-wave mixing (FWM)-based wavelength conversion in a 26.5-km dispersion shifted fiber (DSF) is investigated. The experimental results demonstrate that the conjugated FWM component has higher intensity with the clock pumping than that with the continuous-wave (CW) light pumping. The improvement of FWM-based wavelength conversion efficiency is negligible when the pump power is less than Brillouin threshold. But when the pump power is greater than Brillouin threshold, the improvement becomes significant and increases with the increment of pump power. The improvement can increase up to 9 dB if pump power reaches 17 dBm.     

Characterization of PolyA and PolyC mismatches by Raman spectroscopy

A.C mismatches are studied by Raman spectral characterization of PolyA, PolyC, and their equimolar complex in solution of 0.14 mol/L Na ,pH7.0.Experimental results show that A·C mismatches occur to be A/B (mainly A) conformers, and unlike Watson-Crick base pairing, this kind of mismatches is stabilized by only one hydrogen bond involving cytosine N4H2 and adenine N7.The formation of A·C complex makes the base stacking interactions much stronger, and conformation of the backbone more ordered, which leads to obvious Raman hypochromic effect with some shifts in corresponding bands.