Complexation of the cesium cation with lithium ionophore VIII: extraction and DFT study

From extraction experiments and γ-activity measurements, the extraction constant corresponding to the equilibrium Cs⁺(aq) + 1·Na ⁺ (nb) = 1·Cs⁺(nb) + Na⁺(aq) taking place in the two-phase water-nitrobenzene system (1 = lithium ionophore VIII; aq = aqueous phase, nb = nitrobenzene phase) was evaluated as log K _ex (Cs⁺, 1·Na⁺) = ?0.5 ± 0.1. Further, the stability constant of the 1·Cs⁺ complex in nitrobenzene saturated with water was calculated for a temperature of 25 °C: log β _nb (1·Cs⁺) = 4.8 ± 0.2. Finally, by using quantum mechanical DFT calculations, the most probable structure of the cationic complex species 1·Cs⁺ was derived. In the resulting complex, the “central” cation Cs⁺ is bound by six bond interactions to the corresponding six oxygen atoms of the parent ligand 1.     

Hydrogen Bonding and Solvent Effects on Complexation of Alkali Metal Cations by Lower Rim Calix[4]arene Tetra(O-[N-acetyl-D-phenylglycine methyl ester]) Derivative

Complexation of alkali metal cations with 5,11,17,23-tetra-tert-butyl-26,28,25,27-tetrakis(O-methyl-D-α-phenylglycylcarbonylmethoxy)calix[4]arene (L) was studied by means of spectrophotometric, conductometric and potentiometric titrations at 25 °C. The solvent effect on the binding ability of L was examined by using two solvents with different affinities for hydrogen bonding, viz. methanol and acetonitrile. Despite the presence of intramolecular NH···O=C hydrogen bonds in L, which need to be disrupted to allow metal ion binding, this calix[4]arene amino acid derivative was shown to be an efficient binder for smaller Li⁺ and Na⁺ cations in acetonitrile (lg K _LiL  > 5, lg K _NaL  = 7.66), moderately efficient for K⁺ (lg K _KL  = 4.62), whereas larger Rb⁺ and Cs⁺ did not fit in its hydrophilic cavity. The complex stabilities in methanol were significantly lower (lg K _NaL  =  4.45, lg K _KL  = 2.48). That could be explained by different solvation of the cations and by competition between the cations and methanol molecules (via hydrogen bonds) for amide carbonyl oxygens. The influence of cation solvation on complex stability was most pronounced in the case of Li⁺ for which, contrary to the quite stable LiL ⁺ complex in acetonitrile, no complexation was observed in methanol under the conditions used.     

Theoretical study on the singlet and triplet potential energy surfaces of NH (X3Σ−) + HCNO reaction

Both the singlet and triplet potential energy surfaces (PESs) of the NH (X³Σ^?) + HCNO reaction have been investigated at the BMC-CCSD level based on the UB3LYP/6-311++G(d, p) structures. The results show that the title reaction is more favorable through the singlet potential energy surface than the triplet one. For the singlet potential energy surface of the NH (X³Σ^?) + HCNO reaction, the most feasible association of NH (X³Σ^?) with HCNO is found to be a non-barrier nitrogen-to-carbon attack forming the adduct a (trans-HNCHNO), which can isomerize to the adduct b (cis-HNCHNO). The most feasible channel is that the 1, 3-H shift with N2–H2 and C–N1 bonds cleavage associated with the N1–H2 bond formation of adduct a leads to the product P ₁ (HCN + HNO). Moreover, P ₂ (HNC + HNO) should be the competitive product. The other products, including P ₃ (NH₂ + NCO) and P ₄ (N₂H₂ + CO), are minor products. The product P ₁ can be obtained through two competitive channels Path 1: R → a → P ₁ and Path 3: R → b → d → P ₁ , whereas the product P ₂ can be formed through Path 2: R → b → d → P ₂ . At high temperatures, the nitrogen-to-nitrogen approach may become feasible. For the triplet potential energy surface of the NH (X³Σ^?) + HCNO reaction, the Path 10: R → ³ a → ³ a ₁ → P ₁ should be the most feasible pathway due to the less reaction steps and lower barriers. These conclusions will have impacts on further experimental investigations.     

Syntheses and spectroscopic characterization of double-armed benzo-15-crown-5 derivatives and their sodium and potassium complexes

A series of new benzo-15-crown-5 derivatives (1–6) containing formyl and imine groups were prepared. New formyl crown ethers (1 and 2) were prepared by reaction of 4′,5′-bis(bromomethyl)benzo-15-crown-5 with 2-hydroxy-3-methoxybenzaldehyde (o-vanillin) and 2-hydroxy-5-methoxybenzaldehyde in the presence of NaOH. New Schiff bases (3–6) were synthesized by the condensation of corresponding aldehydes with 1,3-diaminopropane and 1,4-diaminobutane. Sodium and potassium complexes (1a–6a and 1b–6b) of the crown compounds forming crystalline complexes of 1:1 (Na⁺:ligand) and 1:2 (K⁺:ligand) stoichiometries were also synthesized. The structures of the aldehydes 1 and 2, imines 3–6 and complexes (1a–3a and 1b–3b) were confirmed on the basis of elemental analyses, IR, ¹H- and ¹³C-NMR, and mass spectroscopy.     

Anion-directed organized assemblies of protonated pyrazole-based ionic salts

The reactions of 3(5)-(4-methoxyphenyl)-5(3)-phenyl-1H-pyrazole (L ¹ ) with nitric acid and 5-(4-benzyloxyphenyl)-3-(furan-2-yl)-1H-pyrazole(L ² ) with hydrochloric acid produced [HL ¹ · NO₃] (Salt-1) and [HL ² · Cl] (Salt-2). The structures of Salt-1 and Salt-2 were determined by single crystal X-diffraction. In Salt-1, HL ¹ showed [2 + 2] binding of NO₃ ^? ions in the solid state to form dimer architecture with R ₁ ² (4) and R ₄ ⁴ (14) graph sets. An anion directed one-dimensional anion-assisted helical chain with active participation of the chloride ion and protonated pyrazole via N–H···Cl hydrogen bonding in Salt-2. In addition, the protonated HL ² molecules interacted with each other through weak C–H···π interactions resulting in the formation of another one-dimensional helical chain.     

Syntheses and characterization of a new class of vanadia precursors of oxime-modified oxovanadium(V) isopropoxide,crystal and molecular structure of [VO{ONC10H16}3]

Modification of [VO(OPrⁱ)₃] with oximes in different molar ratios, yielded new class of vanadia precursors, [VO{OPrⁱ}_3?n{L}_n] {where, n = 1–3 and LH = C₉H₁₆C=NOH (1–3) and (CH₃)₂C=NOH (4–6)}.All the products are yellow in colour. (1) and (2) are liquid/viscous liquid, while others are solids. Molecular weight measurements of all these derivatives and the ESI-mass spectral studies of (1), (2), (3) and (5) indicate their monomeric nature. ¹H and ¹³C{¹H} NMR spectra suggest that the oximato moieties are monodentate in solution which was further confirmed by the ⁵¹V NMR signals, appeared in the region expected for tetra-coordinated oxo-vanadium atoms. On ageing, a disproportionation reaction occurs in (1) and some crystals appeared. Single crystal X-ray diffraction analyses of the crystals obtained from (1) as well as from (3) were found to be the same and indicate the presence of side-on {dihapto η ²-(N, O)} binding modes of the oximato ligands, leading to the formation of seven coordination environment around the vanadium atom. Thermogravimetric curve of (1) exhibits multi-step decomposition with the formation of V₂O₅ as the final product at ~850 °C. Sol–gel transformation of (3) yielded (a) VO₂ sintered at 300 °C and (b) V₂O₅ at 600 °C. Similarly, sol–gel transformations of (1) and (2) yielded V₂O₅ (c) and (d) at 600 °C, respectively. Formation of monoclinic phase in (a) and orthorhombic phase in (b), (c) and (d) were confirmed by powder XRD patterns.     

Syntheses, spectroscopic characterization and metal ion binding properties of benzo-15-crown-5 derivatives and their sodium and nickel(II) complexes

New benzo-15-crown-5 derivatives containing nitro, amine and imine groups were prepared. Nitro compound (1) was prepared after the reaction?4′,5′-bis(bromethyl)benzo-15-crown-5 and o-nitrophenol in the presence of NaOH. After reduction process by using hydrazine hydrate and Pd/C amine compound (2) was formed. New crown ether imine compounds (3–5) were synthesized by the condensation of corresponding crown ether diamine (2) with salicylaldehyde derivatives. Sodium complexes of the crown compounds (1a–5a) form crystalline 1:1 (Na⁺: ligand) complexes with sodium perchlorate. Nickel(II) complexes (3b–5b) with 1:1 (Ni²⁺:ligand) stoichiometries were also been synthesized from the Schiff bases (3–5). The results indicated that the Schiff base ligands coordinated through the azomethine nitrogen and phenolic oxygen. The extraction ability of compounds (1, 3, 4 and 5) were also evaluated in chloroform by using several alkali and transition metal picrates such as Li⁺, Na⁺, K⁺, Cr³⁺, Mn²⁺, Ni²⁺, Cu²⁺, Zn²⁺ and Pb²⁺.     

Complexation of the cesium cation with nonactin: extraction and DFT study

From extraction experiments and γ-activity measurements, the extraction constant corresponding to the equilibrium Cs⁺(aq) + A^?(aq) + 1(nb) ? 1·Cs⁺(nb) + A^?(nb) taking place in the two-phase water–nitrobenzene system (A^? = picrate, 1 = nonactin; aq = aqueous phase, nb = nitrobenzene phase) was evaluated as log K _ex (1·Cs⁺,A^?) = 2.8 ± 0.1. Further, the stability constant of the 1·Cs⁺ complex in nitrobenzene saturated with water was calculated for a temperature of 25 °C: log β _nb (1·Cs⁺) = 4.7 ± 0.1. Finally, by using quantum–mechanical DFT calculations, the most probable structure of the resulting cationic complex species 1·Cs⁺ was derived.     

Theoretical study on the mechanism of C2Cl3 + NO2 reaction

The radical-molecule reaction of C₂Cl₃ with NO₂ is explored at the B3LYP/6-311G(d,p) and CCSD(T)/6-311+G(d,p) (single-point) levels. On the singlet potential energy surface (PES), the association between C₂Cl₃ and NO₂ is found to be carbon-to-nitrogen attack forming the adduct C₂Cl₃NO₂ (1) without any encounter barrier, followed by isomerization to C₂Cl₃ONO (2). Starting from 2, the most feasible pathway is the N–O1 bond cleavage which lead to P ₁ (C₂Cl₃O + NO). Much less competitively, 2 transforms to the three-membered ring isomer c-OCCl₂C–ClNO (4 ^a ) which can easily interconvert to c-OCCl₂C–ClNO 4 ^b . Then 4 (4 ^a , 4 ^b ) takes direct C1–C2 and C2–O1 bonds cleavage to give P ₂ (COCl₂ + ClCNO). The lesser competitive channel is the 4 ^a isomerizes to the four-membered ring intermediate O-c-CNClOCCl₂ (5) followed by dissociation to P₃ (CO + ClNOCCl₂). The concerted 1,2-Cl shift along with C1–O1 bond rupture of 4 ^b to form ONC(O)CCl₃ (6) followed by dissociation to P ₄ (ClNO + OCCCl₂) is even much less feasible. Moreover, some of P ₃ and P ₄ can further dissociate to P ₅ (ClNO + CO + CCl₂). Compared with the singlet pathways, the triplet pathways may have less contribution to the title reaction. Our results are in marked difference from previous theoretical studies which showed that two initial adducts C₂Cl₃–NO₂ and C₂Cl₃–ONO are obtained. Moreover, in the present paper we focus our main attentions on the cyclic isomers in view of only the chain-like isomers are considered by previous studies. The present study may be helpful for understanding the halogenated vinyl chemistry.     

Complexation of the cesium cation with 1,3-alternate-25,27-bis(1-octyloxy)calix[4]arene-crown-6

From extraction experiments and γ-activity measurements, the extraction constant corresponding to the equilibrium Cs⁺(aq) + I^?(aq) + 1(nb) ? 1·Cs⁺(nb) + I^?(nb) taking place in the two–phase water–nitrobenzene system (1 = 1,3-alternate-25,27-bis(1-octyloxy)calix[4]arene-crown-6; aq = aqueous phase, nb = nitrobenzene phase) was evaluated as log K _ex (1·Cs⁺, I^?) = 2.9 ± 0.1. Further, the stability constant of the 1·Cs⁺ complex in nitrobenzene saturated with water was calculated for a temperature of 25 °C: log β_nb (1·Cs⁺) = 8.8 ± 0.1. Finally, by using quantum–mechanical DFT calculations, the most probable structure of the resulting cationic complex species 1·Cs⁺ was derived.     

A study of metal chelation of dinucleotide analogs in the gas phase by fast-atom bombardment mass spectrometry

Fast-atom bombardment (FAB) mass spectrometry was used to investigate the interaction of proton and alkali metal ions with dinucleotide analogs such as T-n-T (T = thymine moiety, n = polyether chain, e.g., triethylene, tetraethylene, pentaethylene, and hexaethylene ether 1–4), A-n-T (A = adenine unit 5–8), and T-n-OMe (9–12) in 3-nitrobenzyl alcohol matrix. The [M + H]⁺ ion is the most abundant ion for the A-n-T series, whereas in 1–4 and 9–12 the (TC₂H₄)⁺ ion is the most abundant. Formation of [M + H -C₂H₄O]⁺ ions, a characteristic fragmentation of crown ethers under electron ionization, is observed for compounds 1–12 and is more pronounced in 6 and 7. An abundant [M ? H]^? ion is observed for all the compounds studied under negative ion FAB due to the presence of the (-CO-NH-CO-) group of thymine, an indication of existence of intramolecular H bonding. The FAB mass spectra of 1–12 with alkali metal ions (Li⁺, Na⁺, K⁺, Rb⁺, and Cs⁺) showed formation of abundant metal-coordinated ions ([M + Met]⁺ and [TC₂H₄ + Met]⁺). Compounds 3, 4, 6, 7, and 10–12 showed ions due to the substitution of the thymine moiety by a hydroxyl group ([M + Met ? 108]⁺, Met = metal ion). For compound 3 alone, substitution of two thymine groups ([M + Met - 216]⁺) was observed. Metastable ion studies were used to elucidate the structures of these potentially significant ions, and the ion formule were confirmed with high resolution measurements. Selectivity toward metal complexation with ligand size was seen in the T-n-T and A-n-T series and was even more pronounced in A-n-T series. These dinucleotide analogs fall in the following order of chelation of alkali metal ions, acyclic glymes < dinucleotide analogs (acyclic glymes substituted with nitrogen bases) < crown ethers, which places them in perspective as receptor models.     

Synthesis, Cation-Binding and Optical Spectral Studies of Photoemmitive Benzothiazole Crown Ethers

Crown ethers 1–4, encompassing a photoemittive benzothiazole chromophore have been synthesised using standard protocols. Alkali metal picrate extraction profiles reveal that compared to the known crown ethers, benzothiazole benzo-15-crown-5 1 and benzothiazole dibenzo-18-crown-6 3 exhibit relatively higher % extraction for K⁺ than Na⁺ ions. The UV-visible and fluorescence spectra of 1–4, in comparison to their neutral forms were found to be red shifted on protonation due to enhanced intramolecular charge transfer transition. The ortho-substituted benzothiazole crowns 2–4 showed higher Stokes shifts compared to the para analog 1 in the presence of CF₃CO₂H, presumably due to H-bond assisted conformational restriction. No changes were noticeable in the absorption spectra in the presence of alkali metal ions. Even, fluorescence properties of 1–4 were not found to be drastically perturbed by these ions. While 1 exhibited slight quenching at alkali metal ion concentration over 10-folds with respect to that of 1, interestingly, 2–4 showed a slight enhancement of fluorescent intensity at least up to 10-fold concentration of metal ions over those of 2–4. Further increase of metal ion concentrations produces quenching effects. This behavior has been tentatively explained by invoking electrostatic interaction between these cations and the benzothiazole nitrogen ligand.     

Calix[4]arene-bis(t-octylbenzo-18-crown-6) as an extraordinarily effective macrocyclic receptor for the univalent thallium cation

From extraction experiments and $ \gamma $ -activity measurements, the exchange extraction constant corresponding to the equilibrium Tl⁺ (aq) + 1·Cs⁺ (org) ? 1·Tl⁺ (org) + Cs⁺ (aq) taking place in the two-phase water–phenyltrifluoromethyl sulfone (abbrev. FS 13) system (1 = calix[4]arene-bis(t-octylbenzo-18-crown-6); aq = aqueous phase, org = FS 13 phase) was evaluated as log K _ex (Tl⁺, 1·Cs⁺) = 1.7 ± 0.1. Further, the extraordinarily high stability constant of the 1·Tl⁺ complex in FS 13 saturated with water was calculated for a temperature of 25 °C: log β _org(1·Tl⁺) = 13.1 ± 0.2. Finally, by using quantum mechanical DFT calculations, the most probable structure of the cationic complex species 1·Tl⁺ was derived. In the resulting 1·Tl⁺ complex, the “central” cation Tl⁺ is bound by eight bond interactions to six oxygen atoms from the respective 18-crown-6 moiety and to two carbons of the corresponding two benzene rings of the parent receptor 1 via cation–π interaction.     

Lower rim substituted p-tert-butyl calix[4]arene; Part 14. Synthesis, structures and binding studies of calix[4]arene thioamides

A number of p-tert-butylcalix[4]arene thioamides were synthesized and characterized by ¹H-NMR and elemental analysis. Compounds 1–5 are O-substituted derivatives with –CH₂–C(=S)–N–X groups, where NX = morpholidyl, NEt₂, NHC₂H₄Ph, NHCH₂Ph and NHEt, respectively. The X-ray structures of the ligands 1, 3, 5 and of the complex 3·Pb(ClO₄)₂, (compound 6), are presented and their slightly distorted cone conformation is established. The influence of the nature of the thioamide functions (secondary or tertiary) on the extractability of some selected metal cations was investigated. Whereas all these calixarenes show the highest extraction level for Ag⁺, tertiary thioamides are more efficient extractants for Pb²⁺ than secondary thioamides.     

fac-Cobalt(III)-azido complexes derived from substituted pyridyl-based tridentate amines

Four new mononuclear triazido-cobalt(III) complexes [Co(L ^1/2/4 )(N₃)₃] and [Co(L ³ )(N₃)₃]·CH₃CN where L ¹  = [(2-pyridyl)-2-ethyl]-(2-pyridylmethyl)-N-methylamine, L ²  = [(2-pyridyl)-2-ethyl]-[6-methyl-(2-pyridylmethyl)]-N-methylamine, L ³  = [(2-pyridyl)-2-ethyl]-[3,5-dimethyl-4-methoxy-(2-pyridylmethyl)]-N-methylamine, and L ⁴  = [(2-pyridyl)-2-ethyl]-[3,4-dimethoxy-(2-pyridylmethyl)]-N-methylamine, respectively, were synthesized and structurally characterized. The four complexes were characterized by elemental microanalyses, IR and UV–VIS spectroscopy and X-ray single crystal crystallography. The complexes display two strong IR bands over the frequency region 2,020–2,050 cm^?1 assigned for the asymmetric stretching frequency, ν_a(N₃) of the coordinated azides indicating facial geometry. The molecular structure determinations of the complexes were in complete agreement with fac-[Co(L)(N₃)₃] conformation in distorted octahedral Co(III) environment.     

Excited state intramolecular hydrogen atom transfer of phenylethynyl-substituted 2′-hydroxychalcones

(E)-1-[2-Hydroxy-4-(phenylethynyl)phenyl]-3-[4-(phenylethynyl)phenyl]prop-2-en-1-one (1), (E)-1-[2-hydroxy-4-(phenylethynyl)phenyl]-3-phenylprop-2-en-1-one (2), and (E)-1-(2-hydroxyphenyl)-3-[4-(phenylethynyl)phenyl]prop-2-en-1-one (3), which belong to a new class of 2′-hydroxychalcones with phenylethynyl group(s) at the para position of the phenyl ring, were synthesized, and their photochemical properties were investigated. The lowest energy absorption band of 1 peaks at a longer wavelength (383 nm) with a much larger molar extinction coefficient (5.0 × 10⁴ M ^?1 cm^?1) than that of the parent 2′-hydroxychalcone (2′HC) (2.0 × 10⁴ M ^?1 cm^?1 at 318 nm). Upon photoexcitation, all three compounds underwent excited-state intramolecular hydrogen atom transfer (ESIHT) to produce an excited tautomer that emitted fluorescence with a large Stokes shift in the longer wavelength region at 600–700 nm. The quantum yield of the tautomer fluorescence of 1 was not high at 298 K (Φ _f = 9.1 × 10^?5), but was highest among 2′HC and its analogues. The Φ _f values of 1–3 increased 10–30 fold upon reducing the temperature from 298 to 77 K.     

Experimental and DFT study on the complexation of the silver cation with calix[4]arene-bis(t-octylbenzo-18-crown-6)

From extraction experiments and γ-activity measurements, the exchange extraction constant corresponding to the equilibrium Ag⁺ (aq) + 1·Cs⁺(org) ? 1·Ag⁺ (org) + Cs⁺ (aq) taking place in the two-phase water–phenyltrifluoromethyl sulfone (FS 13) system (1 = calix[4]arene-bis(t-octylbenzo-18-crown-6); aq = aqueous phase, org = FS 13 phase) was evaluated as logK _ex (Ag⁺, 1·Cs⁺) = ?1.5 ± 0.1. Further, the stability constant of the 1·Ag⁺ complex in FS 13 saturated with water was calculated for a temperature of 25 °C: log β _org(1·Ag⁺) = 10.1 ± 0.2. Finally, by using quantum mechanical DFT calculations, the most probable structure of the cationic complex species 1·Ag⁺ was derived. In the resulting 1·Ag⁺ complex, the “central” cation Ag⁺ is bound by eight bond interactions to six oxygen atoms from the respective 18-crown-6 moiety and to two carbons of the corresponding two benzene rings of the parent ligand 1 via cation-π interaction.     

Non-aqueous synthesis of nano-sized aluminium(III) isopropoxide derivatives with 8-hydroxyquinoline and their sol–gel transformation to nano-sized δ-alumina

Non-aqueous reactions of aluminum isopropoxide with 8-hydroxyquinoline (Hq = HONH₆C₉) in 1:1, 1:2 and 1:3 molar ratios in anhydrous benzene yield complexes of the type [q_nAl(OPrⁱ)_3?n] {where n = 1 (1), n = 2 (2), n = 3 (3)}. Progress of the reactions were monitored by estimating liberated 2-propanol in benzene-2-propanol azeotrope by oxidimetric method. All the products were fluorescent green powders, sparingly soluble in CHCl₃. They were characterized by elemental analysis, FT-IR and (¹H, ¹³C and ²⁷Al) NMR studies. The ESI mass spectral studies indicate dimeric nature for (1) and (2) and monomeric nature for the compound (3). The XRD spectra of (1–3) showed crystalline nature with the average particle size of 45, 32 and 27 nm respectively, as evaluated from Debye–Scherrer equation. The XRD spectrum of (3) also suggests the formation of β-crystalline polymorphs of Alq₃. The SEM images appear to indicate granular morphology for (1) and formation of cylindrical shaped rods for (2) and (3). Sol–gel hydrolysis of (1), (2) or (3) in presence of a strong acid as well as of the precursor, Al(OPrⁱ)₃,without acid or base catalyst, followed by sintering at 950 °C yielded tetragonal primitive phase of nano-sized δ-alumina in all the cases, as reflected by their powder X-ray diffraction pattern. The IR, SEM and EDX studies also support the formation of transition alumina.     

Click synthesis of triazole-linked calix[4]arene ionophores. Potentiometric and ESI-MS screening of ion-selectivity

A series of 1,2,3-triazole-linked calix[4]arene ionophores comprised of different O-donor groups (OH, COOEt, CONEt₂) attached either to the lower rim of calix or to the triazole moieties were synthesized to explore their ion-selectivity for the first time in potentiometric transduction. Plasticized PVC membrane electrodes (ISEs) were fabricated, and their potentiometric selectivities were measured toward a series of mono- and divalent metal ions. Structure-ion-selectivity relationship and the structural requirements of the coordination sphere for selective binding were established. ISEs made of calix[4]arene-bis-triazoles were found generally to exhibit distinct Ag⁺ selectivity in the order 3 ≈ 4 > 2 > 1, indicating the beneficial effect of the carboxamide or ester groups in the complexing site. In contrast, calix[4]arene-tetratriazole 5 comprised only sp ² N-donor atoms displayed excellent Cu²⁺ selectivity over a series of alkali-, alkaline earth- and transition metal ions. A unique feature of the outstanding Ag⁺ selective electrodes made of 3 and 4 was recognized and suggested their potential application as Na⁺ ISEs in systems not containing silver ions. Further, the potential use of competitive ESI-MS experiments for screening the binding affinities of ionophores 3–6 to different metal ions was also demonstrated.     

A Family of 3-D Coordination Polymers Composed of Mixed-Valence Mn6 Octahedra within Na4 Tetrahedra

The combined use of 1,1,1-tris(hydroxymethyl)ethane (thmeH₃) and azides in Mn carboxylate chemistry has yielded a new family of decanuclear [Mn₆Na₄O(N₃)(O₂CR)₅(thme)₄(H₂O)₄] (R = Me (1); Et (2)) complexes consisting of mixed-valence Mn ₂ ^II Mn ₄ ^III units with a very rare [Mn₆(μ₆-O)]¹⁴⁺ octahedral core contained within a tetrahedron of four Na^I atoms. The [Mn₆Na₄] units of 1 and 2 are connected via the Na atoms to neighboring units, giving 3-D supramolecular assemblies with large channel cavities. Variable-temperature, solid-state dc and ac magnetization studies carried out in the 1.8–300 K range reveal that the Mn₆ units of 1 and 2 are antiferromagnetically coupled to give S = 0 ground states for both complexes.