Experimental and DFT study on the complexation of the silver cation with calix[4]arene-bis(t-octylbenzo-18-crown-6)

From extraction experiments and γ-activity measurements, the exchange extraction constant corresponding to the equilibrium Ag⁺ (aq) + 1·Cs⁺(org) ? 1·Ag⁺ (org) + Cs⁺ (aq) taking place in the two-phase water–phenyltrifluoromethyl sulfone (FS 13) system (1 = calix[4]arene-bis(t-octylbenzo-18-crown-6); aq = aqueous phase, org = FS 13 phase) was evaluated as logK _ex (Ag⁺, 1·Cs⁺) = ?1.5 ± 0.1. Further, the stability constant of the 1·Ag⁺ complex in FS 13 saturated with water was calculated for a temperature of 25 °C: log β _org(1·Ag⁺) = 10.1 ± 0.2. Finally, by using quantum mechanical DFT calculations, the most probable structure of the cationic complex species 1·Ag⁺ was derived. In the resulting 1·Ag⁺ complex, the “central” cation Ag⁺ is bound by eight bond interactions to six oxygen atoms from the respective 18-crown-6 moiety and to two carbons of the corresponding two benzene rings of the parent ligand 1 via cation-π interaction.     

Fluorescent chemosensor for Cu2+ ion based on iminoanthryl appended calix[4]arene

Calix[4]arene based podands 1a of cone conformation and 1b of 1,3-alternate conformation possessing imine units and bearing anthracene moieties have been synthesized by a 1 + 2 Schiff base condensation in good yields and examined for their cation recognition abilities towards cations such as lithium, sodium, potassium, nickel, cadmium, copper, zinc, lead, silver and mercury ions by UV–vis and fluorescence spectroscopy. The calix[4]arene derivative 1b shows a selective fluorescence enhancement in presence of Cu²⁺ ions among the various metal ions tested (Li⁺, Na⁺, K⁺, Ni²⁺, Cd²⁺, Cu²⁺, Zn²⁺, Pb²⁺, Ag⁺ and Hg²⁺ ions). The colour of the solution changes from colourless to light yellow in the presence of Cu²⁺ ions. The stoichiometry of the complex formed between 1b and Cu²⁺ was found to be 1:1 as established by Job’s plot.     

Hydrogen Bonding and Solvent Effects on Complexation of Alkali Metal Cations by Lower Rim Calix[4]arene Tetra(O-[N-acetyl-D-phenylglycine methyl ester]) Derivative

Complexation of alkali metal cations with 5,11,17,23-tetra-tert-butyl-26,28,25,27-tetrakis(O-methyl-D-α-phenylglycylcarbonylmethoxy)calix[4]arene (L) was studied by means of spectrophotometric, conductometric and potentiometric titrations at 25 °C. The solvent effect on the binding ability of L was examined by using two solvents with different affinities for hydrogen bonding, viz. methanol and acetonitrile. Despite the presence of intramolecular NH···O=C hydrogen bonds in L, which need to be disrupted to allow metal ion binding, this calix[4]arene amino acid derivative was shown to be an efficient binder for smaller Li⁺ and Na⁺ cations in acetonitrile (lg K _LiL  > 5, lg K _NaL  = 7.66), moderately efficient for K⁺ (lg K _KL  = 4.62), whereas larger Rb⁺ and Cs⁺ did not fit in its hydrophilic cavity. The complex stabilities in methanol were significantly lower (lg K _NaL  =  4.45, lg K _KL  = 2.48). That could be explained by different solvation of the cations and by competition between the cations and methanol molecules (via hydrogen bonds) for amide carbonyl oxygens. The influence of cation solvation on complex stability was most pronounced in the case of Li⁺ for which, contrary to the quite stable LiL ⁺ complex in acetonitrile, no complexation was observed in methanol under the conditions used.     

On the complexation of some univalent cations with 1,3-alternate-25,27-bis(1-octyloxy)calix[4]arene-crown-6 in nitrobenzene saturated with water

From extraction experiments and γ-activity measurements, the exchange extraction constants corresponding to the general equilibrium M⁺ (aq) + 1·Cs⁺ (nb) ? 1·M⁺ (nb) + Cs⁺ (aq) taking place in the two-phase water–nitrobenzene system (M⁺ = Ag⁺, K⁺, Rb⁺, Tl⁺; 1 = 1,3-alternate-25,27-bis(1-octyloxy)calix[4]arene-crown-6; aq is aqueous phase, nb is nitrobenzene phase) were determined. Moreover, the stability constants of the 1·M⁺ complexes in water-saturated nitrobenzene were calculated; they were found to increase in the series of K⁺ < Rb⁺ < Ag⁺ < Tl⁺.     

Synthesis and cations complexation of dumbbell shaped biscalix[4]-1,3-aza-crown with rigid thiourea-bridge

By reacting calix[4]-1,3-aza-crown 2 with 1,4-phenyl diisothiocyanate in “1 + 2” condensation mode, the novel dumbbell shaped biscalix[4]-1,3-aza-crown 3 with rigid thiourea-bridge was conveniently prepared in yield of 85%. Its structure and conformation were characterized by elemental analyses, ESI-MS, ¹H NMR and ¹H–¹H COSY techniques. The complexation properties of compound 3 were investigated by liquid–liquid extraction experiments and ¹H NMR titration experiments. The results showed that compound 3 has excellent complexation abilities for soft cations and outstanding extraction selectivity for Ag⁺. The Ag⁺/Na⁺ and Ag⁺/Hg²⁺ extraction percentage of host 7 were as high as 43.2 and 16.9, respectively. ¹H NMR titration experiments revealed the 1:2 stoichiometry of receptor 3-Ag⁺ complex was formed.     

Synthesis,metal ion complexation and first use of a thia-aza substituted macrocyclic diamide as a novel sensing material for preparation of selective and sensitive poly(vinyl chloride)-membrane potentiometric sensors for Ag+ ion

A novel thia-aza substituted macrocyclic diamide 7,10,13-triaza-1-thia-4,16-dioxa-20,24-dimethyl-2,3;17,18-dibenzo-cyclooctadecane-6,14-dione (L) was synthesized and stability of its complexes with several alkaline earth, transition and heavy metal ions were studied conductometrically in methanol solution. The resulting 1:1 Ag⁺–L complex found to be the most stable one among all cation complexes studied. The optimized structures of the ligand and its Ag⁺ complex were also investigated. Based on the preliminary results thus obtained, L was used as an excellent sensing material to prepare polymeric membrane (PME) and coated graphite (CGE) silver-selective electrodes. The electrodes revealed a Nernstian behavior over wide Ag⁺ ion concentration ranges (i.e., 2.0 × 10^?6–1.0 × 10^?2 M for PME and 5.0 × 10^?7–1.0 × 10^?2 M for CGE). The potentiometric responses were independent of pH of the test solution in the range 2.9–6.8. The electrodes possessed advantages of low resistance, relatively fast response time, long lifetimes and, especially, good selectivity relative to a wide variety of other cations. The electrodes were used, as indicator electrodes, in the potentiometric titration of silver ion and in the determination of Ag⁺ ion in waste water, photographic emulsion, radiographic and photographic films and dental amalgams.     

Synthesis and metal extraction behavior of pyridine and 1,2,4-triazole substituted calix[4]arenes

Three series of heterocycle substituted calixarenes, derivatized at lower and upper rim, were synthesized and successfully evaluated for metal extraction towards alkali, alkaline, transition and heavy metal ions. The presence and placement of sulfur, heterocycle functionality at upper/lower rim played a crucial role toward the extractability and selectivity of metal ions. The lower rim substituted calixarenes have shown high extractability and poor selectivity. In contrast to this, upper rim substituted calixarenes exhibited good selectivity. Moreover, sulfur functionalized calixarenes have shown better selectivity for heavy metal ions than alkali and alkaline metal ions. Among upper rim substituted calixarenes, 17 and 18 were found to be suitable for Na⁺, K⁺ and Ag⁺, 19,13 for heavy metal ions i.e., Pb²⁺, Hg⁺, Hg²⁺ and Ag⁺, and 11,12 for Pb²⁺ and Ag⁺ only.     

A convenient synthesis of new thiaazacrown ethers and study of their complexation reactions with some transition metal cations in binary acetonitrile–chloroform mixture using the conductometric method

Three novel thiaazacrown ethers 1, 2 and 3 were synthesized in a simple way and in high yield. The complex formation between Ag⁺, Cu²⁺, Zn²⁺, Pb²⁺, Hg²⁺ and Cd²⁺ metal cations with thiaazacrown ethers 1, 2 and 3 have been studied in acetonitrile:chloroform (1:1) binary solvent system using conductometric technique. The conductance data show that the stochiometry of the complexes with Ag⁺, Cu²⁺ and Zn²⁺ cations is 1:1 (L:M), but in the case of Pb²⁺ and Hg²⁺ cations, a 1:2 (L:M) complex is formed in solutions. The formation constants of the resulting 1:1 complexes were determined from the molar conductance-mole ratio data at 25 °C. It was found that the stability constants of 1-Ag²⁺, 2-Ag⁺ and 3-Ag⁺ complexes are higher than those of their corresponding Zn²⁺ and Cu²⁺ complexes and found to vary in order 3 > 1 > 2 for Ag⁺.     

Synthesis and metal ion complexation of acyclic Schiff base podands with lipophilic amide and ester end groups

A series of acyclic Schiff base podands 14?C19 with lipophilic amide and ester end groups were synthesized in good yield and in a simple way. Their transition metal ions complexation was studied using conductometric method in acetonitrile (AN) at 25 °C. Schiff base podands 14?C16 showed a continuous decrease in the molar conductances in their complexation with Hg²⁺, Pb²⁺, Cu²⁺, Zn²⁺ and Cd²⁺ which begins to level off at a mole ratio of 1:1 crown-to-metal indicating the formation of a stable 1:1 complexes. The order of the stability constants of the metal ions studied with the Schiff base podands 14, 15 and 16 is: Hg²⁺ > Pb²⁺ > Cu²⁺ > Zn²⁺ > Cd²⁺ > Ag⁺. Metal ion complexation by acyclic diamide or diester podands involves presumably the oxygen atoms of the carbonyl groups in addition to the nitrogen atoms of the imino groups.     

Study by fluorescence of calix[4]arenes bearing heterocycles with divalent metals: highly selective detection of Pb2+

The present work describes a study of complexation efficiency and selectivity of calix[4]arenes bearing benzoimidazolyl, benzothiazolyl, and benzoxazolyl heterocycles (5–7) towards several selected metal ions using fluorescence and UV–Vis spectroscopy. The binding ability of calixarene derivatives 5–7 toward selected divalent metal ions such as Ca, Cd, Pb, Ni, Mg, Mn, Co, Fe and Zn has been investigated by fluorescence spectroscopic techniques. Fluorescent chemosensor ability of three calixarene derivatives was highly selective for Pb (II) in contrast with other divalent metal studied. The highest association constant corresponds to benzoxazolyl calixarene derivative 7, with a K_a of (1.37 ± 0.06) × 10⁴ mol^?1 L and detection limit for lead of 1.14 ± 0.05 mg L^?1 in methanol being acceptable for the recognition of this metal at micromolar concentrations.     

A New Phosphorescent Cyclometalated Iridium(III) Complex for the Selective Detection of Silver(I) Ion

A new cyclometalated iridium(III) complex, Ir(ppz)₂(dtp) (Ir1) (ppzH = 4-phenylphthalazinone, dtp = diethyl dithiophosphate), has been synthesized and characterized by single-crystal X-ray diffraction. The photoluminescence spectrum of Ir1 shows an emission maximum at 597 nm and its quantum yield is ca. 0.072. Complex Ir1 exhibits a strong and fast decrease of emission upon addition of Ag⁺ in aqueous media. The ratio of Ir1 responding to Ag⁺ was determined to be 1:1 by UV?CVis absorption and phosphorescent emission measurements. Complex Ir1 is a highly selective chemosensor for Ag⁺ over other transition metal ions.     

A study of metal chelation of dinucleotide analogs in the gas phase by fast-atom bombardment mass spectrometry

Fast-atom bombardment (FAB) mass spectrometry was used to investigate the interaction of proton and alkali metal ions with dinucleotide analogs such as T-n-T (T = thymine moiety, n = polyether chain, e.g., triethylene, tetraethylene, pentaethylene, and hexaethylene ether 1–4), A-n-T (A = adenine unit 5–8), and T-n-OMe (9–12) in 3-nitrobenzyl alcohol matrix. The [M + H]⁺ ion is the most abundant ion for the A-n-T series, whereas in 1–4 and 9–12 the (TC₂H₄)⁺ ion is the most abundant. Formation of [M + H -C₂H₄O]⁺ ions, a characteristic fragmentation of crown ethers under electron ionization, is observed for compounds 1–12 and is more pronounced in 6 and 7. An abundant [M ? H]^? ion is observed for all the compounds studied under negative ion FAB due to the presence of the (-CO-NH-CO-) group of thymine, an indication of existence of intramolecular H bonding. The FAB mass spectra of 1–12 with alkali metal ions (Li⁺, Na⁺, K⁺, Rb⁺, and Cs⁺) showed formation of abundant metal-coordinated ions ([M + Met]⁺ and [TC₂H₄ + Met]⁺). Compounds 3, 4, 6, 7, and 10–12 showed ions due to the substitution of the thymine moiety by a hydroxyl group ([M + Met ? 108]⁺, Met = metal ion). For compound 3 alone, substitution of two thymine groups ([M + Met - 216]⁺) was observed. Metastable ion studies were used to elucidate the structures of these potentially significant ions, and the ion formule were confirmed with high resolution measurements. Selectivity toward metal complexation with ligand size was seen in the T-n-T and A-n-T series and was even more pronounced in A-n-T series. These dinucleotide analogs fall in the following order of chelation of alkali metal ions, acyclic glymes < dinucleotide analogs (acyclic glymes substituted with nitrogen bases) < crown ethers, which places them in perspective as receptor models.     

Syntheses of novel calix[4]arene hydrazone-based receptors and their cooperative complexation with soft and hard metal ions

Four novel calix[4]arene hydrazone-based receptors 3a?Cd were prepared in yields of 69?C87% by condensating formylated calix[4]arene ester (2) with salicylyl hydrazine, 2,4-dinitrophenyl hydrazine, nicotinyl hydrazine or phenyl thiosemicarhazide, respectively. New compounds were characterized through elemental analysis, IR, ESI?CMS, ¹H NMR studies. Compounds 3a?Cd containing two binding sites had the complexation abilities for hard and soft cations concurrently. The noncompetitive extracting experiments showed compounds 3a?Cd were excellent receptors for hard and soft metal cations. The competitive extracting experiments exhibited the cooperative complexation in binding hard and soft metal cations and compound 3a possessed outstanding selectivity for Na⁺ and Hg²⁺. The IR spectra of compound 3a before and after complexation revealed that the soft metal cation was binded in the cavity composed of hydrazone groups and azo groups at the upper rims of calix[4]arene units and hard metal cations was binded in cavity composed of ester groups and phenolic hydroxyl groups at the lower rims of calix[4]arene units.     

Complexation of the cesium cation with 1,3-alternate-25,27-bis(1-octyloxy)calix[4]arene-crown-6

From extraction experiments and γ-activity measurements, the extraction constant corresponding to the equilibrium Cs⁺(aq) + I^?(aq) + 1(nb) ? 1·Cs⁺(nb) + I^?(nb) taking place in the two–phase water–nitrobenzene system (1 = 1,3-alternate-25,27-bis(1-octyloxy)calix[4]arene-crown-6; aq = aqueous phase, nb = nitrobenzene phase) was evaluated as log K _ex (1·Cs⁺, I^?) = 2.9 ± 0.1. Further, the stability constant of the 1·Cs⁺ complex in nitrobenzene saturated with water was calculated for a temperature of 25 °C: log β_nb (1·Cs⁺) = 8.8 ± 0.1. Finally, by using quantum–mechanical DFT calculations, the most probable structure of the resulting cationic complex species 1·Cs⁺ was derived.     

Calix[4]arene-bis(t-octylbenzo-18-crown-6) as an extraordinarily effective macrocyclic receptor for the univalent thallium cation

From extraction experiments and $ \gamma $ -activity measurements, the exchange extraction constant corresponding to the equilibrium Tl⁺ (aq) + 1·Cs⁺ (org) ? 1·Tl⁺ (org) + Cs⁺ (aq) taking place in the two-phase water–phenyltrifluoromethyl sulfone (abbrev. FS 13) system (1 = calix[4]arene-bis(t-octylbenzo-18-crown-6); aq = aqueous phase, org = FS 13 phase) was evaluated as log K _ex (Tl⁺, 1·Cs⁺) = 1.7 ± 0.1. Further, the extraordinarily high stability constant of the 1·Tl⁺ complex in FS 13 saturated with water was calculated for a temperature of 25 °C: log β _org(1·Tl⁺) = 13.1 ± 0.2. Finally, by using quantum mechanical DFT calculations, the most probable structure of the cationic complex species 1·Tl⁺ was derived. In the resulting 1·Tl⁺ complex, the “central” cation Tl⁺ is bound by eight bond interactions to six oxygen atoms from the respective 18-crown-6 moiety and to two carbons of the corresponding two benzene rings of the parent receptor 1 via cation–π interaction.     

Heavy metal complexation by N-acyl(thio)urea-functionalized cavitands: synthesis, extraction and potentiometric studies

The synthesis and binding properties of resorcinarene-based cavitands functionalized with N-acylthiourea moieties towards different cations are described. Extraction studies with metal (Pb²⁺, Cu²⁺, Ag⁺, Hg²⁺, Cd²⁺, Eu³⁺, Fe³⁺, K⁺, Na⁺, and Ca²⁺) picrates and the incorporation in ion selective electrodes (ISEs), show that there is more than a 40% increase of the Ag⁺ extraction for N-acylthiourea ionophores (2, 3, and 8) in comparison with N-benzoyl-N′-benzylthiourea (9). Ionophore 8, which has a C₃ chain between the platform and the ionophore, extracts two times more Cu²⁺ than the more rigid one (2). Stoichiometry studies showed for ligand 2 a ligand/metal ratio of 1:1, while for model compound 9 a ratio of 1:2 was found. Potentiometric studies of electrodes revealed that cavitands 2, 3, and 8 induce a significantly different selectivity pattern compared to the cation-exchanger used, as well as model compound 9. Especially, a considerable enhancement of the selectivity towards Ag⁺ and Pb²⁺ over K⁺, Ca²⁺, and Na²⁺ ions was observed.     

Synergistic extraction of some univalent cations into nitrobenzene by using cesium dicarbollylcobaltate and dibenzo-30-crown-10

From extraction experiments and γ-activity measurements, the exchange extraction constants corresponding to the general equilibrium M⁺(aq) + 1·Cs⁺(nb) ? 1·M⁺(nb) + Cs⁺(aq) taking place in the two-phase water–nitrobenzene system (M⁺ = Li⁺, Na⁺, H⁺, NH₄ ⁺, Ag⁺, K⁺, Rb⁺, Tl⁺; 1 = dibenzo-30-crown-10; aq = aqueous phase, nb = nitrobenzene phase) were determined. Furthermore, the stability constants of the 1·M⁺ complexes in water-saturated nitrobenzene were calculated; they were found to increase in the series of Cs⁺ < H⁺, Ag⁺ < NH₄ ⁺ < Na⁺ < Rb⁺ < Li⁺ < K⁺, Tl⁺.     

Novel deep-cavity calix[4]arene derivatives with large s-triazine conjugate systems: synthesis and complexation for dyes

Two novel deep-cavity calix[4]arenes 3 and 4 with large s-triazine π-conjugate systems were designed and synthesized in high yields by reacting calix[4]arene with mono phenyl-substituted cyanuric chloride or further substitution with aniline. The liquid–liquid extraction experiment showed that they possessed excellent extraction abilities towards one cationic and three anionic dyes (Orange I, methylene blue, neutral red, brilliant green). The highest extraction percentage of compound 4 was 88.8 % for brilliant green. The complexation UV–Vis spectra of compounds 3 and 4 with four dyes indicated the existences of complexation action between hosts and guests with 1:1 ratio of complexation in DMSO solution. The association constants suggested that the larger π-conjugate system of compound 4 possessed the stronger complexation abilities than that of compound 3. The association constant of compound 4 with BG was as high as 8.1 × 10⁶ M^?1.     

Alkyl Ammonium Ion Selectivity of Hexahomotrioxacalix[3]arene Triamide Derivative having the Intramolecular Hydrogen-Bonding Group

The lower rim functionalized hexahomotrioxacalix[3]arene triamide 4 with cone-conformation was synthesized from triol 1 by a stepwise reaction. The different extractability for alkali metal ions, transition metal ions, and alkyl ammonium ions from water into dichloromethane is discussed. Due to the strong intramolecular hydrogen bonding between the neighboring NH and CO groups in triamide 4, its affinity to metal cations was weakened. Triamide 4 shows a single selectivity to n-BuNH ₃ ⁺ . The anion complexation of triamide 4 was also studied by ¹H NMR titration experiments. Triamide 4 binds halides through the intermolecular hydrogen bonding among the NH hydrogens of amide in a 1:1 fashion in CDCl₃. The association constants calculated from these changes in chemical shifts of the amide protons are K _a = 223 M^?1 for Cl^? and K _a = 71.7 M^?1 for Br^?. Triamide 4 shows a preference for Cl^? complexation than Br^? complexation.     

Sulphur-enriched thiacalix[4]arenes in the cone conformation: synthesis, crystal structures and cation binding properties

The synthesis and crystal structure of p-tert-butylthia- and p-tert-butylcalix[4]arene derivatives 1–7 substituted at the narrow rim by diethylthiophosphate ester groups, -PS(OEt)₂ are reported. In these compounds the phosphorus atoms are directly attached to the phenolic O atoms of the calix units and the S atoms of the thiophosphate may serve as a two-electron donor to a metal ion. Their crystal structures were solved, which revealed their cone conformation. Their cation-binding properties have been established by liquid-liquid extraction of metal picrates from water into dichloromethane and stability constant determination in acetonitrile using UV-absorption spectrophotometry. Quantitative extraction was achieved for Ag⁺ (%E = 99) with the tetra-substituted thiacalix[4]arene derivative. The complexes were found to be of 1:1 stoichiometry and the location of the metal cations was shown to be nearby the sulphur atoms by ¹H NMR.