Calculations of physical properties of pure and doped crystals: Ab initio and semi-empirical methods in application to YAlO3:Ce and TiO2

In this paper we demonstrate that two independent methods of calculations (DFT based ab initio and semi-empirical crystal field theory) can be used to form a complementary picture of the optical and electronic properties of the doped host and impurity ion. The crystals considered in the present paper are: (i) YAlO₃:Ce³⁺ and (ii) two dominant phases of TiO₂—rutile and anatase. As an example, detailed calculations of the band structure and crystal field energy level scheme of YAlO₃:Ce³⁺ are reported. From the analysis of the band structure and density of states, the character of the YAlO₃ energetic bands and positions of the Ce impurity energy levels were established. It was also shown how the ab initio methods can be used for calculations of the structural properties of solids under elevated pressure. Taking the two dominant phases of TiO₂ as an example, it was demonstrated how the elastic properties can be extracted from the calculated unit cell’s volume at different pressures. Particular attention was paid to the microscopic effects of crystal field, which were evidenced by the pressure-induced changes of the structure and shape of distribution of the Ti 3d electrons density of states. It was demonstrated how the difference in crystal structure of the anatase and rutile phases leads to remarkable difference in microscopic crystal field effects, which was explained by different Ti-O distances in both phases. In addition, the pressure dependence of the band gaps for anatase and rutile was investigated. It was shown that the hydrostatic pressure leads to the band gap narrowing in anatase and band gap widening in rutile, with pressure coefficients +0.00681 eV/GPa for rutile and −0.0088 eV/GPa for anatase.     

<Superscript>119</Superscript>Sn Mössbauer studies on ferromagnetic and photocatalytic Sn–TiO<Subscript>2</Subscript> nanocrystals

Diluted Sn doped TiO₂ nanocrystals (Sn/Ti ratio: x ≤ 1.37 %) were synthesized by a simple hydrothermal method using pure reagents without any surfactant and dispersant material. The XRD of these samples showed an anatase phase, anatase and rutile mixed phases, and a rutile phase of TiO₂ and SnO₂ with the increase of Sn dopant concentrations. ¹¹⁹Sn Mössbauer spectra gave the broad peaks, which were decomposed into doublets and sextets because almost all these samples showed magnetic hysteresis even at room temperature. The titanium oxides doped with x ≤ 0.12 % showed the relatively large magnetic hysteresis and high photocatalytic activity. Mössbauer spectra of samples doped with x > 0.3 % were analyzed by one doublet and two sextets although the samples showed weak ferromagnetism. Three kinds of Sn species may be distinguished as Sn ⁴⁺ substituted TiO₂ and two different magnetic arrangements of Sn doped TiO₂: one with more oxygen defects and other at the interface of TiO₂ and precipitated SnO₂ containing Ti atoms. The correlation between various amounts of Sn sites and photocatalytic activity and/ or magnetic property was discussed.     

甲醇分子在金红石TiO2(110)和锐钛矿TiO2(001)表面吸附和反应的活性位点

通过高分辨的扫描隧道显微术研究并比较了金红石型TiO₂(110)-(1×1)和锐钛矿型TiO₂(001)-(1×4)两种表面的活性位点． 在金红石型TiO₂(110)-(1×1)表面, 观察到氧空位缺陷是O₂和CO₂分子的活性吸附位点,而五配位的Ti原子是水分子和甲醇分子的光催化反应活性位点．在锐钛矿型TiO₂(001)-(1×4)表面,观察到完全氧化的表面,Ti原子更可能是六配位的,H₂O和O₂分子均不易在这些Ti原子上吸附．经还原后表面出现富Ti的缺陷位点, 这些缺陷位点对H₂O和O₂分子表现出明显的活性． 锐钛矿型TiO₂(001)-(1×4)表面的吸附和反应活性并不具有很高的活性,某种程度上其表现出的活性似乎低于金红石型TiO₂(110)-(1×1)表面．     

Investigation on mechanism of photocatalytic activity enhancement of nanometer cerium-doped titania

A series of Ce-TiO₂ are prepared by the sol-gel process with ammonium cerium(IV) nitrate and tetra-n-butyl titanium as raw materials and characterized with XRD, TEM, DRS, and XPS. The aberrance (0.355) of anatase(1 0 1) plane of 0.1% Ce/TiO₂ increases compared to that of TiO₂. Cerium is found to be present as a mixture of Ce^3+/4+ oxidation states, that is, the oxidation state of some cerium in Ce-TiO₂ has changed after calcination. Ce/TiO₂ yields a large red shift compared to TiO₂. Moreover, the reflectance decreases in the visible region after cerium doped on TiO₂, and the lower the reflectance the higher the activity. Cerium appears to enhance the photocatalytic activity of Ce/TiO₂ by suppressing electron-hole recombination with electron trapping at Ce⁴⁺. 0.1% Ce/TiO₂ shows highest activity for the degradation of aqueous suspension of formaldehyde.     

Structural transformation study of TiO2 nanoparticles annealing at different temperatures and the photodegradation process of eosin-Y

Hydrothermal method was used to prepare TiO₂ nanoparticles with annealing temperature at 500 °C–700 °C. The mixture of anatase-rutile phase was investigated by powerful tool of X-ray diffraction (XRD). The structural parameters of anatase and rutile mixture phaseTiO₂ nanoparticles were calculated from the Rietveld refinement. The transformation rate of rutile was increased linearly with an annealing temperature of 500 °C–700 °C. The spherical morphology of the anatase and rutile mixed phase were obtained by scanning electron microscope and transmission electron microscope. The spherical particle of the anatase and rutile TiO₂ shows with great aggregation with different size and within the range of few tens nm. The EDAX study revealed the presence of titanium and oxygen. The best photocatalytic activity was identified as the 87.04% of anatase and 12.96% of rutile mixer phase of TiO₂. Various factors could be involved for a better photocatalytic activity.     

Spectroscopic studies of interfacial structures of CeO2-TiO2 mixed oxides

We have investigated the geometric and electronic structures of the cerium oxide (CeO₂)-titanium dioxide (TiO₂) mixed oxides with various Ce/TiO₂ weight ratios prepared by the sol-gel method in detail by means of X-ray diffraction (XRD), high-resolution X-ray photoelectron spectroscopy (XPS), Raman spectroscopy excited by 325 and 514.5 nm lasers, and scanning electron microscope (SEM). Existence of cerium effectively inhibits the phase transition of TiO₂ from the anatase phase to the rutile phase. XRD peaks of TiO₂ anatase attenuate continuously with the increasing amount of CeO₂ in the mixed oxide, but the XRD peaks of cubic CeO₂ appear only after the weight ratio of Ce/TiO₂ reaches 0.50. The average crystalline sizes of TiO₂ anatase and cubic CeO₂ in CeO₂-TiO₂ mixed oxides are smaller than those in the corresponding individual TiO₂ anatase and cubic CeO₂. Raman spectroscopy excited by the 514.5 nm laser detects CeO₂ after the weight ratio of Ce/TiO₂ reaches 0.70 whereas Raman spectroscopy excited by the 325 nm laser detects CeO₂ after the weight ratio of Ce/TiO₂ reaches 0.90. XPS results demonstrate that Ti exists in the form of Ti⁴⁺ in the CeO₂-TiO₂ mixed oxide. Ce is completely in the form of Ce³⁺ in the mixed oxides with a 0.05 weight ratio of Ce/TiO₂. With the increasing weight ratio of Ce/TiO₂, Ce⁴⁺ dominates. On basis of these results, we proposed that CeO₂ initially nucleates at the defects (oxygen vacancies) within TiO₂ anatase, forming an interface bridged with oxygen between CeO₂ and TiO₂ anatase. At the interface, Ce species cannot substitute Ti⁴⁺ in the lattice of TiO₂ anatase whereas Ti⁴⁺ can substitute Ce⁴⁺ in the lattice of cubic CeO₂. The decreasing concentration of oxygen vacancies, the Ti-O-Ce interface, and the decreasing average crystalline size of TiO₂ anatase act to inhibit the phase transformation of TiO₂ anatase. With the increasing amounts of CeO₂, the CeO₂ clusters continuously grow and form cubic CeO₂ nanocrystals. Spectroscopic results strongly demonstrate that the surface region of CeO₂-TiO₂ mixed oxide is enriched with TiO₂.     

Electronic and optical properties of pure and Mo doped anatase TiO2 using GGA and GGA+U calculations

Comparative GGA and GGA+U calculations for pure and Mo doped anatase TiO₂ are performed based on first principle theory, whose results show that GGA+U calculation provide more reliable results as compared to the experimental findings. The direct band gap nature of the anatase TiO₂ is confirmed, both by using GGA and GGA+U calculations. Mo doping in anatase TiO₂ narrows the band gap of TiO₂ by introducing Mo 4d states below the conduction band minimum. Significant reduction of the band gap of anatase TiO₂ is found with increasing Mo doping concentration due to the introduction of widely distributed Mo 4d states below the conduction band minimum. The increase in the width of the conduction band with increasing doping concentration shows enhancement in the conductivity which may be helpful in increasing electron–hole pairs separation and consequently decreases the carrier recombination. The Mo doped anatase TiO₂ exhibits the n-type characteristic due to the shifting of Fermi level from the top of the valence band to the bottom of the conduction band. Furthermore, a shift in the absorption edge towards visible light region is apparent from the absorption spectrum which will enhance its photocatalytic activity. All the doped models have depicted visible light absorption and the absorption peaks shift towards higher energies in the visible region with increasing doping concentration. Our results describe the way to tailor the band gap of anatase TiO₂ by changing Mo doping concentration. The Mo doped anatase TiO₂ will be a very useful photocatalyst with enhanced visible light photocatalytic activity.     

Eu3+掺杂的Sr2CeO4发光材料的光致发光研究

利用高温固相反应法制备了Eu³⁺掺杂的Sr₂CeO₄样品,并对其吸附水前后的光谱特性进行了研究.结果发现,对于刚制备的Sr_2-xEu_xCeO_4+x/2样品, 在Ce⁴⁺—O^2-的电荷迁移激发中,只有强激发带(～35700cm^-1)与Eu³⁺离子间存在能量传递,而弱激发带 (～29400cm^-1)只是引起Ce⁴⁺—O^2-的电荷迁移发射;在Sr_2-xEu_xCeO_4+x/2样品吸附水后,Eu³⁺的线状吸收跃迁强度显著增加, Ce⁴⁺—O^2-两个激发带均向Eu³⁺离子传递能量. Ce⁴⁺—O^2-强激发带通过交换作用向Eu³⁺离子传递能量,而弱激发带与Eu³⁺离子间的能量传递机理是非辐射多极子近场力的相互作用. 关键词： 2-xEu_xCeO_4+x/2')" href="#">Sr_2-xEu_xCeO_4+x/2 发光性质 能量传递 吸附水     

Influence of physicochemical-electronic properties of transition metal ion doped polycrystalline titania on the photocatalytic degradation of Indigo Carmine and 4-nitrophenol under UV/solar light

To understand the role of dopant inside TiO₂ matrix, anatase TiO₂ was doped with transition metal ions like Mn²⁺, Fe³⁺, Ru³⁺ and Os³⁺ having unique half filled electronic configuration and their photocatalytic activity was probed in the degradation of Indigo Carmine (IC) and 4-nitrophenol (NP) under UV/solar light. For comparison, TiO₂ was also doped with V⁵⁺, Ni²⁺ and Zn²⁺ metal ions having d⁰, d⁸ and d¹⁰ electronic configuration respectively. Irrespective of excitation source UV/solar light and nature of the organic pollutant, photocatalytic activities of doped photocatalysts followed the order: Mn²⁺-TiO₂ > Fe³⁺-TiO₂ > Ru³⁺-TiO₂ ≥ Os³⁺-TiO₂ > Zn²⁺-TiO₂ > V⁵⁺-TiO₂ > Ni²⁺-TiO₂ at an optimum concentration of dopant. Based on the experimental results obtained, it is proposed that the existence of dopant with half filled electronic configuration in TiO₂ matrix which is known to enhance the photocatalytic activity is not universal! Rather it is a complex function of several physicochemical-electronic properties of doped titania. Enhanced photocatalytic activity of Mn²⁺ (0.06 at.%)-TiO₂ was attributed to the combined factors of high positive reduction potential of Mn²⁺/Mn³⁺ pairs, synergistic effects in the mixed polymorphs of anatase and rutile, smaller crystallite size with high intimate contact between two phases and favorable surface structure of the photocatalyst. Despite the intense research devoted to transition metal ion doped TiO₂, it is rather difficult to make unifying conclusion which is highlighted in this study.     

Low-temperature preparation of F-doped TiO2 film and its photocatalytic activity under solar light

A novel and simple method for preparing F-doped anatase TiO₂ (defined as FTO) film with high photocatalytic activity was developed using titanium-n-butoxide and NH₄F as TiO₂ and fluorine precursors under mild condition, i.e. low temperature (lower than 373 K) and ambient pressure. The prepared samples were characterized by XRD, SEM, X-ray photoelectron spectroscopy (XPS), diffuse reflectance spectrum (DRS), photoluminescence spectrum (PL) and TG-DSC analysis. The photocatalytic activity was evaluated by decomposing X-3B under artificial solar light. The results showed that the crystallinity of TiO₂ was improved by F-doping. F⁻ ions can prevent the grain growth, and the transformation of anatase to rutile phase was also inhibited. The doped fluorine atoms existed in two chemical forms, and the ones incorporated into TiO₂ lattice might take a positive role in photocatalysis. Compared with surface fluorination samples, FTO film exhibited better photocatalytic activity. The high photocatalytic activity of FTO may due to extrinsic absorption through the creation of oxygen vacancies rather than the excitation of the intrinsic absorption band of bulk TiO₂. Furthermore, the FTO can be recycled with little photocatalytic activity depression. Without any further treatment besides rinsing, after 6 recycle utilization, the photocatalytic activity of FTO film was still higher than 79%.     

Visible-light-activated Ce-Si co-doped TiO2 photocatalyst

To enhance the visible photocatalytic activity and thermal stability of TiO₂, Ce-Si co-doped TiO₂ materials were synthesized through a nonaqueous method of which the purpose was to reduce the aggregation between TiO₂ particles. The obtained materials maintained anatase phase and large surface area of 103.3 m² g⁻¹ even after calcined at 800 °C. The XPS results also indicated that Si was weaved into the lattice of TiO₂, and Ce mainly existed as oxides on the surface of TiO₂ particles. The doped Si might enhance surface area and suppress transformation from anatase to rutile, while the doped Ce might cause visible absorption and inhibit crystallite growth during heat treatment. Evaluated by decomposing dye Rhodamine B, visible photocatalytic activity of Ce-Si co-doped TiO₂ was obviously higher than that of pure TiO₂ and reached the maximum at Ce and Si contents of 0.5 mol% and 10 mol%.     

First-principles study on anatase TiO2 codoped with nitrogen and praseodymium

The crystal structures, electronic structures and optical properties of nitrogen or/and praseodymium doped anatase TiO₂ were calculated by first principles with the plane-wave ultrasoft pseudopotential method based on density functional theory. Highly efficient visible-light-induced nitrogen or/and praseodymium doped anatase TiO₂ nanocrystal photocatalyst were synthesized by a microwave chemical method. The calculated results show that the photocatalytic activity of TiO₂ can be enhanced by N doping or Pr doping, and can be further enhanced by N+Pr codoping. The band gap change of the codoping TiO₂ is more obvious than that of the single ion doping, which results in the red shift of the optical absorption edges. The results are of great significance for the understanding and further development of visible-light response high activity modified TiO₂ photocatalyst. The photocatalytic activity of the samples for methyl blue degradation was investigated under the irradiation of fluorescent light. The experimental results show that the codoping TiO₂ photocatalytic activity is obviously higher than that of the single ion doping. The experimental results accord with the calculated results.     

Luminescence characteristics of energy transfer between Ce<Superscript>3+</Superscript> and Eu<Superscript>2+</Superscript> in NaMgPO<Subscript>4</Subscript> phosphor

Powder samples of NaMgPO₄ doped with Eu²⁺ and Ce³⁺ were prepared and their photoluminescence spectra were systemically studied. Energy transfer from Ce³⁺ to Eu²⁺ in NaMgPO₄ phosphor was observed by investigating the optical properties from photoluminescence spectra in Eu²⁺ or Ce³⁺ singly doped and Eu²⁺–Ce³⁺ codoped sodium magnesium orthophosphates, NaMgPO₄. The enhancement of UV excitation is attributed to energy transfer from Ce³⁺ to Eu²⁺, and Ce³⁺ plays a role as a sensitizer. Ce³⁺–Eu²⁺ codoped NaMgPO₄ phosphors in which Eu²⁺ can be efficiently excited by 390 nm are potential candidates for phosphor-converted LEDs.     

Quenching of thermo-stimulated photo-ionization by energy transfer in CaAl4O7: Tb, Ce

Crystal fibers of Ce³⁺ and Tb³⁺ singly doped and co-doped CaAl₄O₇ were grown by the LHPG method. Photoluminescence, excitation spectra and photoconduction were measured. Thermo-stimulated photo-ionization (delocalization) of electrons from the lowest field component of the 5d excited state of Ce³⁺ was observed in the Ce³⁺ singly doped sample under excitation at 355 nm. The 5d sublevel was found to locate at 0.3 eV below the conduction band of the host. However, the thermo-stimulated photo-ionization was greatly quenched due to the fast energy transfer from the 5d sublevel to Tb³⁺ ions in the Ce³⁺/Tb³⁺ double doped sample.     

锐钛矿相和金红石相TiO2:Nb的光电性能研究

采用基于密度泛函理论的第一性原理计算了锐钛矿相和金红石相TiO₂:Nb的晶体结构、电子结构和光学性质. 结果表明, 在相等的摩尔掺杂浓度下(6.25%), 锐钛矿相TiO₂:Nb的导带底电子有效质量小于金红石相TiO₂:Nb, 且前者室温载流子浓度是后者的两倍左右, 即具有更大的施主杂质电离率, 从而解释了锐钛矿相TiO₂:Nb比金红石相TiO₂:Nb具有更优异电学性能的实验现象. 光学计算也表明锐钛矿相在可见光区有更大的透过率, 从而在理论上解释了锐钛矿相TiO₂:Nb比金红石相TiO₂:Nb更适于做透明导电材料的原因. 计算结果与实验数据能较好符合. 关键词： 2:Nb')" href="#">TiO₂:Nb 第一性原理 电子结构 光学性能     

Energy transfer between Ce3+ and Eu2+ in doped KSrPO4

Powder samples of KSrPO₄ doped with Eu²⁺ and Ce³⁺ were prepared by combustion-assisted synthesis. Their structures and photoluminescence spectra were systemically studied. Energy transfer from Ce³⁺ to Eu²⁺ was observed by investigating the optical properties from photoluminescence spectra in Eu²⁺ single doped and Ce³⁺–Eu²⁺ co-doped KSrPO₄. The enhancement of UV excitation is attributed to energy transfer from Ce³⁺ to Eu²⁺, and Ce³⁺ plays a role as a sensitizer. Ce³⁺–Eu²⁺ co-doped KrSrPO₄ powders can possibly be applied as blue phosphors in the fields of lighting and display.     

Photocatalytic properties of nanocrystalline TiO<Subscript>2</Subscript> thin films doped with Tb

In this work photocatalytic properties of TiO₂ thin films doped with different amount of Tb have been described. Thin films were prepared by high energy reactive magnetron sputtering process. Comparable photocatalytic activity has been found for all doped TiO₂ thin films, while different amounts of Tb dopant (0.4 and 2.6 at. %) results in either an anatase or rutile structure. It was found that the terbium dopant incorporated into TiO₂ was also responsible for the amount of hydroxyl groups and water particles adsorbed on the thin film surfaces and thus photocatalytic activity was few times higher in comparison with results collected for undoped TiO₂ thin films.     

Thermoluminescence and opitical absorption of BaF2 crystals

Abstract

Nominally pure and Dy-doped BaF₂ crystals were investigated concerning their optical absorption (OA) and thermoluminescence (TL) properties. Peaks at 120—150 and 200°C were observed for a heating rate of 1.7°C/s. The TL response for γ-rays and the TL emission spectra were obtained for these peaks. Except for the purest crystal, all BaF₂ crystals produced OA bands before irradiation typical of Ce³⁺ ions. After irradiation, Dy doped crystals showed bands due to Dy²⁺ ions. A nominally pure sample gave bands related to Ce²⁺ ions and photochromic centers of Ce³⁺ ions. and photochromic centres of Ce³⁺ ions. The correlation between some OA bands and TL peaks is discussed.     

Observation of green emission from Ce-doped gadolinium oxide nanoparticles

Green emission at around 500 nm is observed in Gd₂O₃:Ce³⁺ nanoparticles and the intensity is highly dependent on the concentration of Ce³⁺ in the nanoparticles. The luminescence of this emission displays both picosecond (ps) and millisecond (ms) lifetimes. The ms lifetime is over four orders of magnitude longer than typical luminescence lifetimes (10-40 ns) of Ce³⁺ in traditional Ce³⁺ doped phosphors and therefore likely originates from defect states. The picosecond lifetime is shorter than the typical Ce³⁺ value and is also likely due to defect or surface states. When the samples are annealed at 700 °C, this emission disappears possibly due to changes in the defect moieties or concentration. In addition, a blue emission at around 430 nm is observed in freshly prepared Gd₂O₃ undoped nanoparticles, which is attributed to the stabilizer, polyethylene glycol biscarboxymethyl ether. On aging, the undoped particles show similar emission to the doped particles with similar luminescence lifetimes. When Eu³⁺ ions are co-doped in Gd₂O₃:Ce nanoparticles, both the green emission and the emission at 612 nm from Eu³⁺ are observed.     

Ce4+离子在Ca2SnO4一维结构基质中的电荷迁移光谱研究

利用高温固相反应法制备了Ca₂Sn_1-xCe_xO₄和Ca_2-ySr_ySn_1-xCe_xO₄一维结构发光体. XPS结果显示 Ca₂SnO₄拥有两种结合能分别为5277 eV和5293 关键词： 2Sn_1-xCe_xO₄')" href="#">Ca₂Sn_1-xCe_xO₄ 2-ySr_ySn_1-xCe_xO₄')" href="#">Ca_2-ySr_ySn_1-xCe_xO₄ 一维结构 电荷迁移光谱