Electronic and magnetic properties of single-layer and double-layer VX_2(X=Cl,Br) under biaxial stress

First-principles calculations and Monte Carlo simulations reveal that single-layer and double-layer VX_2(X = Cl, Br)can be tuned from antiferromagnetic(AFM) semiconductors to ferromagnetic(FM) state when biaxial tensile stress is applied. Their ground states are all T phase. The biaxial tensile stress at the phase transition point of the double-layer VX_2 is larger than that of the single-layer VX_2. The direct band gaps can be also manipulated by biaxial tensile stress as they increases with increasing tensile stress to a critical point and then decreases. The Néel temperature(TN) of double-layer VX_2 are higher than that of single-layer. As the stress increases, the TNof all materials tend to increase. The magnetic moment increases with the increase of biaxial tensile stress, and which become insensitive to stress after the phase transition points.Our research provides a method to control the electronic and magnetic properties of VX_2 by stress, and the single-layer and double-layer VX_2 may have potential applications in nano spintronic devices.     

Microscopic measurements in La-NQR of the ternary carbide superconductor LaNiC2

¹³⁹La-NQR measurements have been carried out in the ternary carbide superconductor LaNiC₂. The nuclear quadrupole frequency and the asymmetry parameter of ¹³⁹La in LaNiC₂ were estimated to be about 1.9 MHz and 0, respectively. In the normal state, the nuclear spin relaxation rate (1/T₁) in the ¹³⁹La NQR signal was proportional to temperature (T) in zero external field above the superconducting transition temperature (T_c) or in an external field larger than the superconducting critical field, which means the system is in the Fermi-liquid state. In the superconducting state, on the other hand, 1/T₁ decreases no more linearly with T, but decreases rapidly exponentially as exp (−Δ/k_BT) at low T with an appreciable enhancement just below T_c. The value of the superconducting energy gap, 2Δ, was estimated to be 3.34k_BT_c, compared with 3.52k_BT_c of the BCS-value. This result strongly suggests that the superconductivity in LaNiC₂ is of a conventional BCS type.     

Scaling behavior of the thermopower of the archetypal heavy-fermion metal YbRh2Si2

We reveal and explain the scaling behavior of the thermopower S/T exhibited by the archetypal heavy-fermion (HF) metal YbRh₂Si₂ under the application of magnetic field B at temperature T. We show that the same scaling is demonstrated by different HF compounds such as β-YbAlB₄ and the strongly correlated layered cobalt oxide [BiBa_0.66K_0.36O₂]CoO₂. Using YbRh₂Si₂ as an example, we demonstrate that the scaling behavior of S/T is violated at the antiferromagnetic phase transition, while both the residual resistivity ρ₀ and the density of states, N, experience jumps at the phase transition, causing the thermopower to make two jumps and change its sign. Our elucidation is based on flattening of the single-particle spectrum that profoundly affects ρ₀ and N. To depict the main features of the S/T behavior, we construct a T –B schematic phase diagram of YbRh₂Si₂. Our calculated S/T for the HF compounds are in good agreement with experimental facts and support our observations.     

Pressure-induced phase transition of B-type Y_2O_3

The synthesized monoclinic(B-type) phase of Y_2O_3 has been investigated by in situ angle-dispersive x-ray diffraction in a diamond anvil cell up to 44 GPa at room temperature. A phase transition occurs from monoclinic(B-type) to hexagonal(A-type) phase at 23.5 GPa and these two phases coexist even at the highest pressure. Parameters of isothermal equation of state are V_0= 69.0(1) ~3, K_0= 159(3) GPa, K_0= 4(fixed) for the B-type phase and V_0= 67.8(2) ~3, K_0= 156(3) GPa,K'_0= 4(fixed) for the A-type phase. The structural anisotropy increases with increasing pressure for both phases.     

In vivo NMR T2 relaxation of experimental brain tumors in the cat: a multiparameter tissue characterization.

Experimental gliomas (F98) were inoculated in cat brain for the systematic study of their in vivo T₂ relaxation time behavior. With a CPMG multi-echo imaging sequence, a train of 16 echoes was evaluated to obtain the transverse relaxation time and the magnetization M(0) at time T = 0. The magnetization decay curves were analyzed for biexponentiality. All tissues showed monoexponential T₂, only that of the ventricular fluid and part of the vital tumor tissue were biexponential. Based on these NMR relaxation parameters the tissues were characterized, their correct assignment being assured by comparison with histological slices. T₂ of normal grey and white matter was 74 ± 6 and 72 ± 6 msec, respectively. These two tissue types were distinguished through M(0) which for white matter was only 0.88 of the intensity of grey matter in full agreement with water content, determined from tissue specimens. At the time of maximal tumor growth and edema spread a tissue differentiation was possible in NMR relaxation parameter images. Separation of the three tissue groups of normal tissue, tumor and edema was based on T₂ with T_2(normal) < T_2(tumor) < T_2(edema). Using M(0) as a second parameter the differentiation was supported, in particular between white matter and tumor or edema. Animals were studied at 1–4 wk after tumor implantation to study tumor development. The magnetization M(0) of both tumor and peritumoral edema went through a maximum between the second and third week of tumor growth. T₂ of edema was maximal at the same time with 133 ± 4 msec, while the relaxation time of tumor continued to increase during the whole growth period, reaching values of 114 ± 12 msec at the fourth week. Thus, a complete characterization of pathological tissues with NMR relaxometry must include a detailed study of the developmental changes of these tissues to assure correct experimental conditions for the goal of optimal contrast between normal and pathological regions in the NMR images.     

Pinning model derived from resistive measurements on melt processed Bi2Sr2CaCu2O8

On melt processed samples of the 86 K superconductor Bi₂Sr₂CaCu₂O₈ we have performed resistive measurements in the low field limit B0.13 T and 40 KT77 K. The voltage drop is found to rise exponentially with current E ∝exp j/j₀, which is interpreted in terms of thermal activation of pinned flux lines. An activation energy U₀(T)90 meV is derived from the transition width j₀(T) and is related to a plausible core pinning interaction of flux lines with normal conducting precipitates. This reproduces the measured j_c(B, T) values in the whole regime investigated. We conclude that pinning centers must have a minimum size in order to control flux creep. Finally we demonstrate that conventional summation of the single site pinning forces cannot account for the observed macroscopic depinning current density.     

Selection of pulse sequences producing maximum tissue contrast in magnetic resonance imaging

The importance of spin density [N(H)] and spin-lattice (T₁) and spin-spin (T₂) relaxation in the characterization of tissue by nuclear magnetic resonance (NMR) is clearly recognized. This work considers which optimized pulse sequences provide the best tissue discrimination between a given pair of tissues. The effects of tissue spin density and machine-imposed minimum rephasing echo times (TE_MIN) for achieving maximum signal tissue contrast are discussed. A long TE_MIN sacrifices T₁-dependent contrast in saturation recovery (SR) and inversion recovery (IR) pulse sequences so that spin-echo (SE) becomes the optimum sequence to provide tissue contrast, due to T₂ relaxation. Pulse sequences providing superior performance may be selected based on spin density and T₁ and T₂ ratios for a given pair of tissues. Selection of the preferred pulse sequence and interpulse delay times to produce maximum tissue contrast is strongly dependent on knowledge of tissue spin densities as well as T₁ and T₂ characteristics. As the spin density ratio increases, IR replaces SR as the preferred sequence and SE replaces IR and SR as the pulse sequence providing superior contrast. To select the optimal pulse sequence and interpulse delay times, an accurate knowledge of tissue spin density, T₁ and T₂ must be known for each tissue.     

Nuclear magnetic resonance relaxometry of the normal heart: Relationship between collagen content and relaxation times of the four chambers

The use of nuclear magnetic resonance (NMR) relaxation time measurements for characterization of abnormal cardiac tissue depends upon knowledge of variations of relaxation times of normal myocardium and determinants of these variations. We calculated in vitro NMR T₁ and T₂ relaxation times of canine myocardium from the four cardiac chambers, and determined hydroxyproline concentration (as a measure of collagen) and percent water content of the samples. We found both water content and T₁ relaxation time of the right ventricle to be significantly greater than the left atrium (p < 0.05). T₂ relaxation time of the left ventricle was found to be shorter than each of the other three chambers (p < 0.05). There were significant correlations between the spin-lattice relaxation time and both percent water content (r = 0.58) and hydroxyproline concentration (r = 0.45). A significant correlation was also found between T₂ relaxation time and hydroxyproline concentration (r = 0.49). When T₁ and T₂ were adjusted for water and hydroxyproline content, there was no longer any evidence for significant interchamber differences for either T₁ or T₂. These data suggest that differences in NMR relaxation times exist among the four chambers of the normal canine heart. Furthermore, a major determinant of myocardial spin-lattice relaxation time is tissue water content while both collagen content and percent water content significantly contribute to variability in cardiac chamber T₂ relaxation times.     

Superconductivity and pseudogap states studied by microwave conductivity measurements of λ-(BEDT-TSF)2GaCl4

We have investigated the microwave response at 45 GHz in an organic superconductor λ-(BEDT-TSF)₂GaCl₄ with T_c = 4.8 K. We determine the μ₀H_c2–T phase diagram from microwave loss and find that the superconducting state is in the pure limit (l/ξ_GL  10). Although the real part of the complex conductivity (=σ₁ + iσ₂) does not show a coherence peak just below T_c, the London penetration depth completely saturates at low temperatures down to T/T_c = 0.2, which may provide an evidence for a conventional s-wave pairing. In the metallic state below about 50 K, (parallel to the c-axis) deviates downward from , while σ₂, which should be zero in a conventional metal, increases exponentially toward T_c. In spite of the fact that the Hagen–Rubens limit is well satisfied as far as the dc conductivity is concerned, a Drude model is unable to explain the large positive σ₂. In order to explain such anomalies in the metallic state, we propose a possible existence of so-called a pseudogap near a Fermi level. The anomalous increase of the positive σ₂ may be attributed to an appearance of pre-formed electron pairs in the pseudogap state. This appearance can be regarded as a precursor to the superconducting transition. Such a precursory phenomenon has been observed also in the isostructural FeCl₄ salt with the anomalous metallic states, which shows a negative σ₂ in contrast to the GaCl₄ salt. Just the opposite of ground states in between the GaCl₄ and FeCl₄ salts may result in the contrasting anomalous metallic states with different precursory phenomena with opposite signs of σ₂.     

Validity of NMR pore-size analysis of cultural heritage ancient building materials containing magnetic impurities

NMR relaxation time distributions, obtained with laboratory and portable devices, are utilized to characterize the pore-size distributions of building materials coming from the Roman remains of the Greek-Roman Theatre of Taormina. To validate the interpretation of relaxation data in terms of pore-size distribution, comparison of results from standard and in situ NMR experiments with results of the mercury intrusion porosimetry (MIP) has been made. Although the pore-size distributions can be obtained by NMR in terms of either longitudinal (T₁) or transverse (T₂) relaxation times distributions, the shorter duration of the T₂ measurement makes it, in principle, preferable, although the determination of T₂ distributions is not necessarily an easy alternative to finding T₁ distributions. Among other things, the T₁ distribution is almost independent of the inhomogeneity of the magnetic field, while the T₂ distribution is strongly influenced by it. This paper was aimed at answering two questions: what are the validity limits to interpret NMR data in terms of pore-size distributions and whether the portable device can successfully be applied as a non-destructive and non-invasive tool for in situ NMR analysis of building materials, particularly those of Cultural Heritage interest.     

天然钴尖晶石的谱学特征及颜色成因

尖晶石[(Mg, Fe, Zn, Mn)(Al, Cr, Fe)₂O₄]是一种典型的镁铝氧化物,常用于宝石、陶瓷及微晶玻璃材料中。近年来,一种颜色为矢车菊蓝色的天然尖晶石晶体出现在市场中,备受收藏者和设计师们的喜爱,其价格也不断攀高。天然钴尖晶石常呈矢车菊蓝色,透明,长波紫外光下显示弱-中等的绿色荧光,短波呈惰性,变色钴尖晶石在日光下常呈矢车菊蓝色而在白炽灯下呈紫红色。采用电子探针、电感耦合等离子体质谱、傅里叶变换红外光谱、显微聚焦激光拉曼光谱、紫外可见吸收光谱和阴极发光等测试技术获得了天然钴尖晶石和变色钴尖晶石的谱学特征,并探讨了其颜色成因和变色机理。结果表明：天然钴尖晶和变色钴尖晶石属于镁尖晶石,其主要化学成分为MgO和Al₂O₃,平均含量分别为25.77%和71.37%;此外,过渡族元素Zn,Fe,Co和V含量较高,其平均含量分别为1 337.85,831.53,99.52和58.26 μg·g-1。天然钴尖晶石与变色钴尖晶石的红外光谱和拉曼光谱与普通尖晶石的特征峰基本一致,其中红外光谱在517,589和704 cm-1处的主位均发生红移,其红移范围在5~33 cm-1之内;拉曼特征峰集中在300~800 cm-1范围之内。结合化学成分分析、紫外可见吸收光谱和阴极发光测试结果,认为天然钴尖晶石的颜色是因晶格中所含Co2+,Fe3+和V3+中的电子跃迁共同作用所致。由于Co2+发生自旋禁阻跃迁4T_1g(4F)→4T_1g(4P)使得可见光橙黄区（550~630 nm）内产生吸收带,而V3+的外层电子跃迁（3T_1g→3T_1g(3P)）和Cr3+的外层电子跃迁（4A₂→E₂）使得可见光蓝紫区（400~490 nm）内产生吸收线,可见光中红光和蓝光均匀透过,从而使其产生变色效应。该研究基本确定了天然钴尖晶石的谱学特征和成色机理,以及变色钴尖晶石的变色效应,为其科学鉴别提供了可靠的理论依据,有助于天然钴蓝色尖晶石与普通蓝色尖晶石、合成钴蓝色尖晶石的区分,具有重要的理论研究和商贸学应用价值。     

Two separate Li ionic motions observed by Li and B NMR in xLi2S + (1 − x)B2S3 glassy fast ionic conductors

Studies of ion dynamics in the highly conductive glassy fast ionic conductor (FIC) xLi₂S + (1 − x)B₂S₃ (x = 0.65 and 0.70) were made with NMR nuclear spin lattice relaxation (NSLR) R₁(ω, T) of both mobile ⁷Li and immobile ¹¹B ions, and ⁷Li NMR line narrowing δν(T). The possible dependence of ion dynamics on the short range order structures (SRO) and the distribution of activation energies (DAE) in this highly conductive FIC was investigated. Two Gaussian DAE were employed to fit ⁷Li NSLR data, where each Gaussian DAE was correlated to a separate ¹¹B NSLR in a BS₃ and in a BS₄ group. The long range diffusion of Li ions among BS₃ groups and a seemingly localized ionic hopping motion around BS₄ group is suggested as a microscopic model for the ion dynamics in thioborate glasses, namely a ‘two channel relaxation’.     

Cross relaxation of the proton magnetization in ammonium compounds

Expressions are derived for the time constants T_1D and T_SD of the NH₄ protons in tunneling ammonium compounds below the line-width transition temperature. T_1D characterizes the speed of the spin-lattice relaxation of the dipolar energy and T_SD the speed of the cross relaxation between the A and T symmetry species. The expressions should be valid if all the tunnel splittings between the T species levels are larger than the magnetic dipolar interaction. Predictions are compared with new experimental results on T_SD in (NH₄)₂PbCl₆ and with some earlier results on T_SD and T_1D in (NH₄)₂ SnBr₆ and NH₄ClO₄. They support the conclusion that for T_1D>T_SD the T levels are nondegenerate, while the condition T_1D< T_SD refers to at least a partial degeneracy.     

Cl nuclear quadrupole resonance studies of molecular motions of ClO3 and water diffusion in Ca(ClO3)2·2H2O

A ³⁵Cl nuclear quadrupole resonance (³⁵Cl-NQR) investigation of polycrystalline Ca(ClO₃)₂·2H₂O is described. The ³⁵Cl-NQR frequencies (ν_Q) for two resonance lines (ν_Q1 and ν_Q2), the spin lattice relaxation time (T_1Q) for ν_Q2 only and the line width δν_Q2 were measured in the temperature range 292–345 K, except for the frequency measured up to 455 K. The observed decrease in the resonance frequencies with increasing temperature permitted the determination of the frequencies of librations of the ClO₃⁻ ion about two axes perpendicular to the three-fold axis of the ion mainly responsible for this effect. The temperature dependence of the relaxation time T_1Q proved the occurrence of water diffusion and hindered rotation of ClO₃⁻ ions. The activation energies of these two molecular motions were determined, and their effect on the electric field gradient at the site of a chlorine nucleus was discussed. Temperature measurements of the line width δν_Q2 confirmed the conclusions drawn from the analysis of T_1Q(T).     

MRI of hepatic lymphoma

Thirteen patients with biopsy proven hepatic lymphoma (2 Hodgkin, 11 Non-Hodgkin) and a control group of 15 patients with hepatic metastases were analyzed quantitatively and qualitatively by MRI. Focal hepatic lymphoma was most reliably detected (eight of eight patients) and appeared hypointense relative to liver on T₁ weighted (CNR − 7.4 ± 2.3) and hyperintense on T₂ weighted (CNR + 8.4 ± 2.9) images. The mean T₁ and T₂ relaxation times of focal hepatic lymphoma (T₁ = 832 ± 234 msec, T₂ = 84 ± 16 ms) differed significantly from adjacent non-tumorous liver (T₁ = 420 ± 121 ms, T₂ = 51 ± 9 ms; p < 0.05), however CNR values and relaxation times were similar to those of hepatic metastases. Diffuse hepatic lymphoma (microscopic periportal infiltration) was undetectable by MRI in three patients by either morphologic features or quantitative criteria. A mixed pattern of hepatic lymphoma (focal lesions and diffuse infiltration) showed focal areas of slightly decreased signal intensity on T₁ weighted images (CNR = −1.7 ± 0.4) while T₂ weighted images revealed multiple regions of focal hyperintensity (CNR = +13.3 ± 8.4) superimposed on a diffusely hyperintense liver. Our experience demonstrates that either T₁ or T₂ weighted techniques are useful in detecting focal and that T₂ weighted techniques are useful in detecting mixed hepatic lymphoma. Conventional image derived relaxation time measurements and quantitative parameters were of no additional diagnostic value.     

钙钛矿型锰氧化物(La$lt;sub$gt;0.8$lt;/sub$gt;Eu$lt;sub$gt;0.2$lt;/sub$gt;)$lt;sub$gt;4/3$lt;/sub$gt;Sr$lt;sub$gt;5/3$lt;/sub$gt;Mn$lt;sub$gt;2$lt;/sub$gt;O$lt;sub$gt;7$lt;/sub$gt;的磁性和电性研究

采用传统固相反应法制备钙钛矿型锰氧化物 (La_0.8Eu_0.2)_4/3Sr_5/3Mn₂O₇多晶样品, X-射线衍射分析表明, 样品(La_0.8Eu_0.2)_4/3Sr_5/3Mn₂O₇结构呈现良好的单相. 通过磁化强度随温度的变化曲线(M-T)、不同温度下磁化强度随磁场的变化曲线(M-H)和电子自旋共振谱发现: 在300 K以下, 随着温度的降低, 样品先后经历了二维短程铁磁有序转变 (T_C^2D ≈ 282 K)、三维长程铁磁有序转变(T_C^3D ≈ 259 K)、奈尔转变(T_N ≈ 208K)和电荷有序转变(T_CO ≈ 35 K); 样品 (La_0.8Eu_0.2)_4/3Sr_5/3Mn₂O₇在T_N以下, 主要处于反铁磁态; 在T_C^3D达到370 K时, 样品处于铁磁-顺磁共存态, 在370 K以上时样品进入顺磁态. 此外, 分析电阻率随温度的变化曲线(ρ-T)得到: 样品在金属-绝缘转变温度(T_P ≈ 80 K)附近出现最大磁电阻值, 其位置远离T_C^3D, 表现出非本征磁电阻现象, 其磁电阻值约为61%. 在T_CO以下, 电阻率出现明显增长, 这是由于温度下降使原本在高温部分巡游的e_g电子开始自发局域化增强所致. 通过对 (La_0.8Eu_0.2)_4/3Sr_5/3Mn₂O₇的ρ-T 曲线拟合, 发现样品在高温部分的导电方式基本遵循小极化子的导电方式. 关键词： 磁性 电性 金属-绝缘转变温度 电子自旋共振     

基于T2截止值的幂函数构建毛管压力曲线

岩心核磁共振（NMR）T₂谱和毛管压力曲线都在一定程度上反映了岩石孔隙结构，理论分析表明可利用T₂谱构建毛管压力曲线，由此快速获取储层孔隙结构的信息．本文对18块岩样T₂分布和毛管压力曲线进行了分析，提出将T₂截止值作为幂函数的分段点，采用分段幂函数方法构建岩样的NMR毛管压力曲线，并与采用不分段幂函数方法获得的毛管压力曲线进行了对比．研究结果表明，与不分段幂函数方法相比，分段幂函数方法得到的结果和压汞实验测定的毛管压力曲线吻合度更高，平均拟合度（R²）达到0.943 1，并且论证了T₂截止值作为分段点进行分段幂函数法构建NMR毛管压力曲线的合理性和可靠性．T₂截止值的引入提高了幂函数法构建NMR毛管压力曲线的精度，是利用NMR T₂谱构建岩样毛管压力曲线的有价值探索．     

Off-energy-shell continuation of the two-nucleon transition matrix in the presence of tensor forces

For a coupled partial wave with a bound state, the entire T-matrix is determined by the bound-state energy and wave function, the on-shell mixing parameter and a real symmetric matrix function σ(k₂,₂ k₁₁) of the continuous momentum variables k and the discrete eigenchannel labels . The on-shell part of σ is given by the eigenphases, the arbitrariness of the T-matrix is the off-shell continuation of this phase-shift matrix σ(k₂, k₁) into two dimensions. Three possible techniques are suggested to go from to the entire T-matrix. This construction procedure for T avoids the usual complications of a potential fit.     

Temperature dependence of intensities and widths of N2-broadened lines in the 15 μm CO2 band from tunable laser measurements

Intensities and nitrogen-broadened widths of several low-J lines in the Q-branch of the 15 μm band of CO₂ have been determined over the temperature range 200–300 K. Measurements were made with a tunable infra-red diode laser spectrometer having a spectral resolution 10^-4 cm^-1. Measured intensities are uniformly about 7% lower than available calculations which were based on previous measurements of band intensity. Measured line widths are higher than available calculations and generally followed the relation

b_L⁰(T)=b_L⁰(T₀)(T₀|T)ⁿ

with n = 0.74 (standard deviation 0.08).     

Simulations of the effects of density and temperature profile on SMBI penetration depth based on the HL-2A tokamak configuration

Using the trans-neut module of the BOUT++ code, we study how the fueling penetration depth of supersonic molecular beam injection(SMBI) is affected by plasma density and temperature profiles. The plasma densities and temperatures in L-mode are initialized to be a set of linear profiles with different core plasma densities and temperatures. The plasma profiles are relaxed to a set of steady states with different core plasma densities or temperatures. For a fixed gradient, the steady profiles are characterized by the core plasma density and temperature. The SMBI is investigated based on the final steady profiles with different core plasma densities or temperatures. The simulated results suggest that the SMB injection will be blocked by dense core plasma and high-temperature plasma. Once the core plasma density is set to be N_(i0)= 1.4N_0(N_0= 1 × 10~(19)m~(-3)) it produces a deeper penetration depth. When N_(i0) is increased from 1.4N_0 to 3.9N_0 at intervals of 0.8N_0, keeping a constant core temperature of T_(e0)= 725 eV at the radial position of ψ = 0.65, the penetration depth gradually decreases. Meanwhile, when the density is fixed at N_(i0)= 1.4N_0 and the core plasma temperature T_(e0) is set to 365 eV,the penetration depth increases. The penetration depth decreases as T_(e0) is increased from 365 eV to 2759 eV. Sufficiently large N_(i0) or T_(e0) causes most of the injected molecules to stay in the scrape-off-layer(SOL) region, lowering the fueling efficiency.