An Evaluation of UiO‐66 for Gas‐Based Applications

In addition to its high thermal stability, repetitive hydration/dehydration tests have revealed that the porous zirconium terephthalate UiO‐66 switches reversibly between its dehydroxylated and hydroxylated versions. The structure of its dehydroxylated form has thus been elucidated by coupling molecular simulations and X‐ray powder diffraction data. Infrared measurements have shown that relatively weak acid sites are available while microcalorimetry combined with Monte Carlo simulations emphasize moderate interactions between the UiO‐66 surface and a wide range of guest molecules including CH₄, CO, and CO₂. These properties, in conjunction with its significant adsorption capacity, make UiO‐66 of interest for its further evaluation for CO₂ recovery in industrial applications. This global approach suggests a strategy for the evaluation of metal–organic frameworks for gas‐based applications.     

Metal–Organic Gel Material Based on UiO‐66‐NH2 Nanoparticles for Improved Adsorption and Conversion of Carbon Dioxide

Metal–organic frameworks (MOFs) including the UiO‐66 series show potential application in the adsorption and conversion of CO₂. Herein, we report the first tetravalent metal‐based metal–organic gels constructed from Zr^IV and 2‐aminoterephthalic acid (H₂BDC‐NH₂). The ZrBDC‐NH₂ gel materials are based on UiO‐66‐NH₂ nanoparticles and were easily prepared under mild conditions (80 °C for 4.5 h). The ZrBDC‐NH₂‐1:1‐0.2 gel material has a high surface area (up to 1040 m² g^?1) and showed outstanding performance in CO₂ adsorption (by using the dried material) and conversion (by using the wet gel) arising from the combined advantages of the gel and the UiO‐66‐NH₂ MOF. The ZrBDC‐NH₂‐1:1‐0.2 dried material showed 38 % higher capture capacity for CO₂ at 298 K than microcrystalline UiO‐66‐NH₂. It showed high ideal adsorbed solution theory selectivity (71.6 at 298 K) for a CO₂/N₂ gas mixture (molar ratio 15:85). Furthermore, the ZrBDC‐NH₂‐1:1‐0.2 gel showed activity as a heterogeneous catalyst in the chemical fixation of CO₂ and an excellent catalytic performance was achieved for the cycloaddition of atmospheric pressure of CO₂ to epoxides at 373 K. In addition, the gel catalyst could be reused over multiple cycles with no considerable loss of catalytic activity.     

Fluorocarbon Separation in a Thermally Robust Zirconium Carboxylate Metal–Organic Framework

Fluorocarbons have important applications in industry, but are environmentally unfriendly, and can cause ozone depletion and contribute to the global warming with long atmospheric lifetimes and high global warming potential. In this work, the metal–organic framework UiO‐66(Zr) is demonstrated to have excellent performance characteristics to separate fluorocarbon mixtures at room temperature. Adsorption isotherm measurements of UiO‐66(Zr) display high fluorocarbon sorption uptakes of 5.0 mmol g^?1 for R22 (CHClF₂), 4.6 mmol g^?1 for R125 (CHF₂CF₃), and 2.9 mmol g^?1 for R32 (CH₂F₂) at 298 K and 1 bar. Breakthrough data obtained for binary (R22/R32 and R32/R125) and ternary (R32/R125/R134a) mixtures reveal high selectivities and capacities of UiO‐66(Zr) for the separation and recycling of these fluorocarbon mixtures. Furthermore, the UiO‐66(Zr) saturated with R22 and R125 can be regenerated at temperatures as low as 120 °C with excellent desorption–adsorption cycling stabilities.     

Combination of Optimization and Metalated‐Ligand Exchange: An Effective Approach to Functionalize UiO‐66(Zr) MOFs for CO2 Separation

The strategy to functionalize water‐stable metal–organic frameworks (MOFs) in order to improve their CO₂ uptake capacities for efficient CO₂ separation remains limited and challenging. We herein present an effective approach to functionalize a prominent water‐stable MOF, UiO‐66(Zr), by a combination of optimization and metalated‐ligand exchange. In particular, by systematic optimization, we have successfully obtained UiO‐66(Zr) of the highest BET surface area reported so far (1730 m² g^?1). Moreover, it shows a hybrid Type I/IV N₂ isotherm at 77 K and a mesopore size of 3.9 nm for the first time. The UiO‐66 MOF underwent a metalated‐ligand‐exchange (MLE) process to yield a series of new UiO‐66‐type MOFs, among which UiO‐66‐(COONa)₂‐EX and UiO‐66‐(COOLi)₄‐EX MOFs have both enhanced CO₂ working capacity and IAST CO₂/N₂ selectivity. Our approach has thus suggested an alternative design to achieve water‐stable MOFs with high crystallinity and gas uptake for efficient CO₂ separation.     

Gated Channels and Selectivity Tuning of CO2 over N2 Sorption by Post‐Synthetic Modification of a UiO‐66‐Type Metal–Organic Framework

The highly porous and stable metal–organic framework (MOF) UiO‐66 was altered using post‐synthetic modifications (PSMs). Prefunctionalization allowed the introduction of carbon double bonds into the framework through a four‐step synthesis from 2‐bromo‐1,4‐benzenedicarboxylic acid; the organic linker 2‐allyl‐1,4‐benzenedicarboxylic acid was obtained. The corresponding functionalized MOF (UiO‐66‐allyl) served as a platform for further PSMs. From UiO‐66‐allyl, epoxy, dibromide, thioether, diamine, and amino alcohol functionalities were synthesized. The abilities of these compounds to adsorb CO₂ and N₂ were compared, which revealed the structure–selectivity correlations. All synthesized MOFs showed profound thermal stability together with an increased ability for selective CO₂ uptake and molecular gate functionalities at low temperatures.     

Water Stable Zr–Benzenedicarboxylate Metal–Organic Frameworks as Photocatalysts for Hydrogen Generation

The Zr‐containing metal–organic frameworks (MOFs) formed by terephthalate (UiO‐66) and 2‐aminoterephthalate ligands [UiO‐66(NH₂)] are two notably water‐resistant MOFs that exhibit photocatalytic activity for hydrogen generation in methanol or water/methanol upon irradiation at wavelength longer than 300 nm. The apparent quantum yield for H₂ generation using monochromatic light at 370 nm in water/methanol 3:1 was of 3.5 % for UiO‐66(NH₂). Laser‐flash photolysis has allowed detecting for UiO‐66 and UiO‐66(NH₂) the photochemical generation of a long lived charge separated state whose decay is not complete 300 μs after the laser flash. Our finding and particularly the influence of the amino group producing a bathochromic shift in the optical spectrum without altering the photochemistry shows promises for the development of more efficient MOFs for water splitting.     

A Cationic MOF with High Uptake and Selectivity for CO2 due to Multiple CO2‐Philic Sites

The reaction of N‐rich pyrazinyl triazolyl carboxyl ligand 3‐(4‐carboxylbenzene)‐5‐(2‐pyrazinyl)‐1H‐1,2,4‐triazole (H₂cbptz) with MnCl₂ afforded 3D cationic metal–organic framework (MOF) [Mn₂(Hcbptz)₂(Cl)(H₂O)]Cl ? DMF ? 0.5 CH₃CN ( 1 ), which has an unusual (3,4)‐connected 3,4T1 topology and 1D channels composed of cavities. MOF 1 has a very polar framework that contains exposed metal sites, uncoordinated N atoms, narrow channels, and Cl^? basic sites, which lead to not only high CO₂ uptake, but also remarkably selective adsorption of CO₂ over N₂ and CH₄ at 298–333 K. The multiple CO₂‐philic sites were identified by grand canonical Monte Carlo simulations. Moreover, 1 shows excellent stability in natural air environment. These advantages make 1 a very promising candidate in post‐combustion CO₂ capture, natural‐gas upgrading, and landfill gas‐purification processes.     

Tuning CO2 Uptake and Reversible Iodine Adsorption in Two Isoreticular MOFs through Ligand Functionalization

The synthesis and characterization of two isoreticular metal–organic frameworks (MOFs), {[Cd(bdc)(4‐bpmh)]}_n?2 n(H₂O) ( 1 ) and {[Cd(2‐NH₂bdc)(4‐bpmh)]}_n?2 n(H₂O) ( 2 ) [bdc=benzene dicarboxylic acid; 2‐NH₂bdc=2‐amino benzene dicarboxylic acid; 4‐bpmh=N,N‐bis‐pyridin‐4‐ylmethylene‐hydrazine], are reported. Both compounds possess similar two‐fold interpenetrated 3D frameworks bridged by dicarboxylates and a 4‐bpmh linker. The 2D Cd‐dicarboxylate layers are extended along the a‐axis to form distorted square grids which are further pillared by 4‐bpmh linkers to result in a 3D pillared‐bilayer interpenetrated framework. Gas adsorption studies demonstrate that the amino‐functionalized MOF 2 shows high selectivity for CO₂ (8.4 wt % 273 K and 7.0 wt % 298 K) over CH₄, and the uptake amounts are almost double that of non‐functional MOF 1 . Iodine (I₂) adsorption studies reveal that amino‐functionalized MOF 2 exhibits a faster I₂ adsorption rate and controlled delivery of I₂ over the non‐functionalized homolog 1 .     

Phosphonate‐Modified UiO‐66 Brønsted Acid Catalyst and Its Use in Dehydra‐Decyclization of 2‐Methyltetrahydrofuran to Pentadienes

Phosphorus‐modified all‐silica zeolites exhibit activity and selectivity in certain Brønsted acid catalyzed reactions for biomass conversion. In an effort to achieve similar performance with catalysts having well‐defined sites, we report the incorporation of Brønsted acidity to metal–organic frameworks with the UiO‐66 topology, achieved by attaching phosphonic acid to the 1,4‐benzenedicarboxylate ligand and using it to form UiO‐66‐PO₃H₂ by post‐synthesis modification. Characterization reveals that UiO‐66‐PO₃H₂ retains stability similar to UiO‐66, and exhibits weak Brønsted acidity, as demonstrated by titrations, alcohol dehydration, and dehydra‐decyclization of 2‐methyltetrahydrofuran (2‐MTHF). For the later reaction, the reported catalyst exhibits site‐time yields and selectivity approaching that of phosphoric acid on all‐silica zeolites. Using solid‐state NMR and deprotonation energy calculations, the chemical environments of P and the corresponding acidities are determined.     

Evaluation of UiO‐66 metal organic framework as an effective sorbent for Curcumin's overdose

Metal organic frameworks (MOFs) UiO‐66 (UiO stands for University of Oslo) and NH₂‐UiO‐66 were prepared and characterized as sorbent (antidotal agents) for curcumin (CUR) adsorption. The structure of products were characterized by X‐ray powder diffraction (XRD), Field emission scanning electron microscopy (FESEM), thermogravimetric analysis (TGA), Attenuated Total Reflectance‐Fourier transform infrared spectroscopy (ATR‐FTIR), and N₂ adsorption–desorption measurements. FESEM showed NH₂‐UiO‐66 displayed symmetrical crystals with triangular base pyramid morphology, with the particle size around 100 nm and uniform size distribution. Adsorption capacities of CUR/MOFs with different mass ratios in the feed were investigated in the present study, and this investigation revealed that when the CUR/MOFs with mass ratio was around 0.4, the absorption capacity of NH₂‐UiO‐66 had tended to maximum. Although, functionalization reduced the specific surface area and free volume, introducing polar amine groups could improve the affinity of NH₂‐UiO‐66 respect to CUR. Kinetic studies showed that the kinetic data are well fitted with the pseudo‐ second‐order model. MTT assay revealed that MOFs at the concentration range of 0–560 μg/ml had no cytotoxic effect on the Human Foreskin Fibroblast normal cell line (HFF‐2). These results suggest that these MOFs could be safe as sorbent for adsorb CUR from the body.     

A Flexible Pro‐porous Coordination Polymer: Non‐conventional Synthesis and Separation Properties Towards CO2/CH4 Mixtures

The novel coordination polymers [Cu(Hoxonic)(H₂O)]_n ( 1 ) and [Cu(Hoxonic)(bpy)_0.5]_n ? 1.5 n H₂O ( 2?H₂O ) (H₃oxonic: 4,6‐dihydroxy‐1,3,5‐triazine‐2‐carboxylic acid; bpy: 4,4′‐bipyridine) have been isolated and structurally characterised by ab initio X‐ray powder diffraction. The dense phase 1 contains 1D zig‐zag chains in which Hoxonic dianions bridge square‐pyramidal copper(II) ions, apically coordinated by water molecules. On the contrary, 2?H₂O , prepared by solution and solventless methods, is based on 2D layers of octahedral copper(II) ions bridged by Hoxonic ligands, further pillared by bpy spacers. The resulting pro‐porous 3D network possesses small hydrated cavities. The reactivity, thermal, magnetic and adsorptive properties of these materials have been investigated. Notably, the adsorption studies on 2 show that this material possesses unusual adsorption behaviour. Indeed, guest uptake is facilitated by increasing the thermal energy of both the guest and the framework. Thus, neither N₂ at 77 K nor CO₂ at 195 K are incorporated, and CH₄ is only minimally adsorbed at 273 K and high pressures (0.5 mmol g^?1 at 2500 kPa). By contrast, CO₂ is readily incorporated at 273 K (up to 2.5 mmol g^?1 at 2500 kPa). The selectivity of 2 towards CO₂ over CH₄ has been investigated by means of variable‐temperature zero coverage adsorption experiments and measurement of breakthrough curves of CO₂/CH₄ mixtures. The results show the highly selective incorporation of CO₂ in 2 , which can be rationalised on the basis of the framework flexibility and polar nature of its voids.     

Dynamic Entangled Porous Framework for Hydrocarbon (C2–C3) Storage,CO2 Capture,and Separation

Storage and separation of small (C1–C3) hydrocarbons are of great significance as these are alternative energy resources and also can be used as raw materials for many industrially important materials. Selective capture of greenhouse gas, CO₂ from CH₄ is important to improve the quality of natural gas. Among the available porous materials, MOFs with permanent porosity are the most suitable to serve these purposes. Herein, a two‐fold entangled dynamic framework {[Zn₂(bdc)₂(bpNDI)]?4DMF}_n with pore surface carved with polar functional groups and aromatic π clouds is exploited for selective capture of CO₂, C2, and C3 hydrocarbons at ambient condition. The framework shows stepwise CO₂ and C₂H₂ uptake at 195 K but type I profiles are observed at 298 K. The IAST selectivity of CO₂ over CH₄ is the highest (598 at 298 K) among the MOFs without open metal sites reported till date. It also shows high selectivity for C₂H₂, C₂H₄, C₂H₆, and C₃H₈ over CH₄ at 298 K. DFT calculations reveal that aromatic π surface and the polar imide (RNC=O) functional groups are the primary adsorption sites for adsorption. Furthermore, breakthrough column experiments showed CO₂/CH₄ C₂H₆/CH₄ and CO₂/N₂ separation capability at ambient condition.     

Impact of the Nature of the Organic Spacer on the Crystallization Kinetics of UiO‐66(Zr)‐Type MOFs

The influence of the constitutive dicarboxylate linkers (size, functional group) over the crystallization kinetics of a series of porous Zr metal–organic frameworks with the UiO‐66 topology has been investigated by in situ time‐resolved energy dispersive X‐ray diffraction (EDXRD). Both large aromatic spacers (2,6‐naphthalene‐, 4,4′‐biphenyl‐ and 3,3′‐dichloro‐4,4′‐azobenzene‐dicarboxylates) and a series of X‐functionalized terephthalates (X=NH₂, NO₂, Br, CH₃) were investigated in dimethylformamide (DMF) at different temperatures and compared with the parent UiO‐66. Using different crystallization models, rate constants and further kinetic parameters (such as activation energy) have been extracted. Finally, the impact of the replacement of the toxic DMF by water on the crystallization kinetics was studied through the synthesis of the functionalized UiO‐66‐NO₂ solid.     

Molecularly imprinted polymer coating on metal‐organic frameworks for solid‐phase extraction of fluoroquinolones from water

In this work, a novel surface molecularly imprinted polymer with high adsorption capacity, high adsorption rate, and high selectivity for fluoroquinolones was prepared on the surface of UiO‐66‐NH₂, which is a kind of metal‐organic framework. The surface morphology and adsorption properties of this molecularly imprinted polymer were investigated. The maximum adsorption capacity was 99.19 mg/g, and adsorption equilibrium was achieved within 65 s. Combined with reversed‐phase high‐performance liquid chromatography, the molecularly imprinted polymer was used to selectively enrich, separate and analyze fluoroquinolones present in lake water. The results showed that the recoveries of the four fluoroquinolones were 92.6–100.5%, and the relative standard deviations were 2.9–6.4% (n = 3). The novel molecularly imprinted polymer is an excellent adsorbent and has broad application prospects in the enrichment and separation of trace analytes in complex samples.     

Highly Sensitive and Selective Detection of Pb(II) by NH2−SiO2/Ru(bpy)32+−UiO66 based Solid‐state ECL Sensor

In this study, a novel electrochemiluminescence (ECL) sensor for highly sensitive and selective detection of Pb(II) was developed based on Ru(bpy)₃²⁺ encapsulated UiO66 metal‐organic‐framework (Ru(bpy)₃²⁺?UiO66 MOF) and ?NH₂ group functionalized silica (NH₂?SiO₂). The NH₂?SiO₂ with large surface area provided an excellent platform for the ECL sensor. As numerous exposed carboxyl groups were present on UiO66 backbone, the Ru(bpy)₃²⁺?UiO66 could be steadily immobilized to NH₂?SiO₂ by forming amide bonds. Meanwhile, the introduced UiO66 MOF which used for the encapsulation of Ru(bpy)₃²⁺, significantly enhanced the ECL efficiency of the proposed sensor, as it possessed a large specific surface area and porosity for the loading of Ru(bpy)₃²⁺. Moreover, a high quenching effect on ECL intensity was obtained in the presence of Pb(II) in the electrolyte. Under the optimal conditions, the quenched ECL intensity showed a good linear relationship within Pb(II) concentration in the range from 1.0×10^?6 to 1.0×10² μM, with a detection limit of 1.0×10^?7 μM (S/N=3). The proposed sensor for Pb(II) detection was simple in operation, rapid in testing, stable in signal, and showed a good anti‐interference ability to some other metal ions. Besides, its application for detecting Pb(II) in a real sample was also investigated here. This work provides a potential platform for metal ions detection in environmental monitoring field.     

Preparation and evaluation of open‐tubular capillary column combining a metal–organic framework and a brush‐shaped polymer for liquid chromatography

In this work, an open‐tubular capillary liquid‐phase column was prepared by modifying chain polymer on the inner surface of capillary and chemical bonding of metal organic frameworks, NH₂‐UiO‐66, to the brushes of chain polymer (poly(glycidyl methacrylate)). Besides advantages of facial preparation and good permeability, the chain polymer effectively increases the modification amount of NH₂‐UiO‐66 nanoparticles to increase the phase ratio of open‐tubular capillary column and enhance the interactions with analytes. The results of scanning electron microscope energy‐dispersive X‐ray spectra indicated that NH₂‐UiO‐66 nanoparticles were successfully bonded to the chain polymer. Because of the hydrophobic interaction and hydrogen bonding interaction between the analytes and the ligand of NH₂‐UiO‐66, different analytes were well separated on the NH₂‐UiO‐66‐modified poly(glycidyl methacrylate) capillary (1.12 m × 25 μm id × 365 μm od) with the high absolute column efficiency reaching 121 477 plates, benefiting from an open‐tubular column and low mass transfer resistance provided by polymer brush and metal–organic framework crystal. The relative standard deviations of the retention time for run‐to‐run, day‐to‐day, and column‐to‐column (n = 3) runs are below 4.28%, exhibiting good repeatability. Finally, the column was successfully applied to separation of flavonoids in licorice.     

Long‐Term Photostability in Terephthalate Metal–Organic Frameworks

Prolonged (weeks) UV/Vis irradiation under Ar of UiO‐66(Zr), UiO66 Zr‐NO₂, MIL101 Fe, MIL125 Ti‐NH₂, MIL101 Cr and MIL101 Cr(Pt) shows that these MOFs undergo photodecarboxylation of benzenedicarboxylate (BDC) linker in a significant percentage depending on the structure and composition of the material. Routine characterization techniques such as XRD, UV/Vis spectroscopy and TGA fail to detect changes in the material, although porosity and surface area change upon irradiation of powders. In contrast to BCD‐containing MOFs, zeolitic imidazolate ZIF‐8 does not evolve CO₂ or any other gas upon irradiation.     

Superprotonic Conductivity of a UiO‐66 Framework Functionalized with Sulfonic Acid Groups by Facile Postsynthetic Oxidation

Facile postsynthetic oxidation of the thiol‐laced UiO‐66‐type framework UiO‐66(SH)₂ enabled the generation of UiO‐66(SO₃H)₂ with sulfonic acid groups covalently linked to the backbone of the system. The oxidized material exhibited a superprotonic conductivity of 8.4×10^?2 S cm^?1 at 80 °C and 90 % relative humidity, and long‐term stability of the conductivity was observed. This level of conductivity exceeds that of any proton‐conducting MOF reported to date and is equivalent to the conductivity of the most effective known electrolyte, Nafion.     

Monodentate AIEgen Anchored on Metal‐Organic Framework for Fast Fluorescence Sensing of Phosphate

Herein, a novel sensor (TPE‐UiO‐66) was designed via anchoring monodentate tetraphenylethylene (TPE) onto UiO‐66 framework. The combination of the distinct aggregation‐induced emission (AIE) of TPE and the easy replacement of monodentate linker by guest phosphate, makes TPE‐UiO‐66 an ideal platform for sensing HPO₄^2–. Experimental results indicate that TPE‐UiO‐66 can selectively sense HPO₄^2– from other common anions. The limit of detection (LOD) can reach to 5.56 μmol·L^–1 and more importantly, TPE‐UiO‐66 also exhibits an ultra‐fast equilibrium response of 2 min, far faster than those of other sensors especially for UiO‐66‐NH₂. The combination of experimental analysis and density functional theory (DFT) calculations demonstrates that the high selectivity, high sensitivity and fast response of HPO₄^2– detection by TPE‐UiO‐66 can be attributed to the stronger coordination interactions of HPO₄^2– with Zr‐O cluster of UiO‐66 than that of TPE molecule. This study not only provides a potential probe for phosphate, but also represents a novel strategy to design stimuli‐responsive fluorescent MOF‐based sensors via using monodentate AIEgens.     

The First Study on the Reactivity of Water Vapor in Metal–Organic Frameworks with Platinum Nanocrystals

We first studied the reactivity of H₂O vapor in metal–organic frameworks (MOFs) with Pt nanocrystals (NCs) through the water–gas shift (WGS) reaction. A water‐stable MOF, UiO‐66, serves as a highly effective support material for the WGS reaction compared with ZrO₂. The origin of the high catalytic performance was investigated using in situ IR spectroscopy. In addition, from a comparison of the catalytic activities of Pt on UiO‐66, where Pt NCs are located on the surface of UiO‐66 and Pt@UiO‐66, where Pt NCs are coated with UiO‐66, we found that the competitive effects of H₂O condensation and diffusion in the UiO‐66 play important roles in the catalytic activity of Pt NCs. A thinner UiO‐66 coating further enhanced the WGS reaction activity of Pt NCs by minimizing the negative effect of slow H₂O diffusion in UiO‐66.