基于环糊精的高度支化聚合物*

环糊精（CD）与高度支化聚合物都存在空腔结构,若将两者结合起来可构筑出含有两种不同疏水空腔且具有特异物理化学功能的高分子体系,并有望在分子包合与识别、药物控释、基因传输等领域得到新的应用。本文根据高度支化聚合物与环糊精结合方式的不同,从以环糊精为核的高度支化聚合物、外端悬挂环糊精的高度支化聚合物、高度支化聚合物的结构单元与环糊精包合、环糊精与客体分子包合后自组装成高度支化聚合物,以及用功能化的环糊精单体合成超支化聚合物等5个方面对其研究进展进行了总结和评述,并在此基础上展望了该类聚合物的研究方向和发展趋势。     

三检测体积排除色谱表征聚合物支化结构

以α-溴代异丁酸叔丁酯(t-BBiB)为引发剂,CuBr/联二吡啶为催化体系,二乙烯苯(DVB)为支化单体,采用原子转移自由基聚合反应(ATRP)经过一步加料方法和先臂后核方法分别合成不同支化结构类型的支化聚合物,同时以四官能度引发剂经ATRP合成臂数确定的星形聚合物为参照。采用三检测体积排除色谱(TD-SEC)得到Zimm相对支化因子g′与g和表征聚合物支化结构类型的指数因子ε(g′=gε)。结果表明:随支化结构类型的不同,支化结构指数因子ε表现出不同的分子量依赖特性。星状支化聚合物的ε平均值<1,而且随分子量的变化保持相对恒定;无规支化聚合物的ε平均值>1,而且其值随分子量的增加不断减小。因此,可以由三检测体积排除色谱进行分析确证聚合物的支化结构类型。     

支化聚合物的熔体流变特性

从支化聚合物的流变特性表征以及分子结构和温度对其流变行为的影响三个方面综述了支化聚合物的流变特性，长链支化结构明显延缓了整个高分子的松驰过程，这集中表现在剪切条件下的应变软化和拉伸条件下的应变硬化，而且，长链支化使得时－温等效原理不再有效，对温度的依赖性也表现出一定的复杂性，改进蛇行理论和耦合模型可以解释部分实验结果，但又都存在不足，因此，对于支化聚合物独特的流变行为，还需进一步的深入研究。     

1,2-聚丁二烯长链支化的研究

本文研究了1,2-结构含量在80～90%的1,2-聚丁二烯的长链支化,发现聚合物的立体规整性与聚合物的分子量无关,可以用GPC-自动粘度计联用技术研究其长链支化,产生支化的临界分子量为40万左右。     

温敏支化聚合物的合成及其双重相转变行为

将N-异丙基丙烯酰胺(NIPAm)与具有温敏性的大分子单体进行共聚,制得了主链与支链在水溶液中具有不同相转变温度的温敏支化聚合物。经过双重相转变过程后,通过扫描电子显微镜(SEM)可以观察到聚合物链形成的具有较大比表面积的"葡萄串"结构,光散射实验中聚合物粒径大小随着温度升高发生两次突变进一步解释了双重相转变过程中聚合物微观形态的变化。在温敏支化聚合物溶液样品的差示扫描量热法(DSC)曲线中可以观察到35℃与21℃出现两组相对独立的吸热峰,从热力学的角度描述了双重相转变行为。通过使用二维红外相关光谱技术分析了温敏支化聚合物各基团对温度扰动的响应顺序,其结果说明仅存在于支链中的丙烯酸丁酯(BA)结构单元要先于NIPAm结构单元发生变化,对双重相转变行为的机理有了更进一步的说明。"葡萄串"结构的形成有效地提高了温敏聚合物的疏水比表面积,有望应用于生化分离领域。     

双烯化合物类单体合成支化聚合物的支化结构的研究

分别以二乙烯基苯(DVB)、双甲基丙烯酸二缩三乙二醇酯(tri-EGDMA)和1,6-双马来酰亚胺基正己烷(BMIH)为支化单体,采用原子转移自由基聚合合成支化聚苯乙烯;以先核后臂法合成的星状支化聚苯乙烯为参照对合成的支化聚合物的支化形态进行研究.采用气相色谱(GC)、核磁共振氢谱(1H-NMR)和三检测凝胶渗透色谱(TD-SEC)测定了苯乙烯的转化率,聚合物分子量及其分布,特性黏数和均方回转半径.实验结果表明3个支化聚合反应体系内悬垂双键是逐步消耗的,不存在明显的成核过程.反应前期,以形成带有悬垂双键的初级链和轻度支化聚合物为主,聚合物分子量随单体转化率逐步上升;反应后期,悬垂双键聚合导致的分子之间的偶合更加明显,使得聚合物分子量快速上升,合成得到的都是无规支化聚合物.     

高度支化状二茂铁基聚合物研究进展*

高度支化状二茂铁基聚合物具有丰富的拓扑结构形态和独特的电、磁、催化和氧化还原性能,而且这类材料具有独特的流动性能、低的粘度和进一步的可反应性,从而使得它们展现出良好的应用前景,开发二茂铁基功能高分子材料正日益受到重视.本文介绍高度支化状二茂铁基聚合物的合成、结构、性能以及应用的研究进展.     

爆炸物检测用荧光聚合物材料

作为荧光传感材料,荧光聚合物不仅具有传感单元多、荧光亮度高、光稳定性好等特点,而且方便制备荧光传感薄膜,易于实现器件化,在爆炸物荧光检测中得到了广泛的研究与应用。近年来,随着荧光聚合物从传统的线型结构向支化和多孔网络结构的拓展,以及各种功能单元的引入,大量的新型荧光聚合物有效地提升了爆炸物检测的灵敏度、选择性和响应速度等性能。本综述从线型聚合物、支化聚合物、多孔聚合物三类体系出发,总结和评述了用于爆炸物荧光检测的线型共轭与非共轭聚合物、树枝状分子与超支化聚合物、无定形与结晶型多孔聚合物等典型体系的分子结构设计策略、功能特点以及传感性能,并展望了荧光聚合物未来在爆炸物检测应用中所面临的机遇和挑战。     

胺基功能化咔唑共轭聚合物的合成及其光电性能研究

发展了新型含有胺基的支化烷基修饰的咔唑单元,并且与芴、咔唑、苯等单元通过Suzuki偶联反应共聚得到不同主链结构的水/醇溶共轭聚合物界面修饰材料,研究了主链结构的变化对材料光物理、电化学性能的影响.所有聚合物均被用作阴极界面材料应用于器件结构为ITO/PEDOT：PSS/P-PPV/界面层/Al的聚合物发光二极管中.在相同器件制备条件下,系统比较了不同主链结构的界面修饰材料在器件中的性能,并研究了性能差异的原因.器件研究结果表明,在高功函数金属Al阴极的聚合物发光二极管中,含胺基功能化咔唑单元的水/醇溶共轭聚合物材料由于界面偶极的形成,均表现出很好的电子注入/传输性能,与之对应的器件性能得到大幅提升.     

高性能长链支化聚乙烯制备的研究进展

长链支化聚乙烯（LCB-PE）在聚乙烯链上含有长链的支化结构，因此具有优异的流变性能，从而改善了聚合物的加工性能，这是其它结构聚乙烯所不能比拟的。长链支化聚乙烯的制备方法有辐照法、茂金属共聚法和聚丁二烯加氢法等，本文综述了各种方法的基本原理和优缺点。辐照法制备LCB-PE的优点是比较简便，容易实现工业化生产，但也有制备的LCB-PE结构不明确，高能辐照对设备要求较高的缺点。茂金属共聚法制备的LCB-PE结构较明确，制备过程较易控制，但由于茂金属催化剂的专利问题而不易推广。聚丁二烯加氢法制备的LCB-PE其主链长度、支链长度和支链密度都可控，但过程较复杂，成本高，不易推广。     

表面光接枝聚合反应新进展

表面性能对高分子材料应用至关重要,但多数聚烯烃材料表面惰性,需对表面进行改性或功能化．紫外光引发表面光接枝聚合反应具有诸多优势,因而获得广泛应用．作者以本实验室近年的研究为基础,结合这一领域国际上的部分重要研究成果,概述了实施表面光接枝聚合反应的一些新方法：控制,活性表面光接枝聚合、自引发光接枝聚合、暗区表面光接枝聚合、表面光接枝-交联聚合以及表面小分子光化学反应等．     

聚甲基丙烯酸甲酯接枝聚氧乙烯共聚物溶液性质的研究

采用核磁共振 (NMR)、动态激光光散射 (DLS)、透射电子显微镜 (TEM )等方法研究了规整性聚甲基丙烯酸甲酯接枝聚氧乙烯共聚物溶液性质 ,研究表明两亲接枝共聚物在选择性溶剂中可形成球状胶束 ,溶液的浓度、温度和聚合物结构等因素影响其胶束的大小、形态     

Graft polymerization from pore wall of three-dimensionally ordered macroporous cross-linked polystyrene via atom transfer radical polymerization

The surface-initiated atom-transfer radical polymerization (ATRP) technique was applied to the graft polymerization of methyl methacrylate (MMA) and N-isopropylacrylamide (NIPAm) from three-dimensionally ordered macroporous cross-linked polystyrene (3DOM CLPS) on which the initiator, halogen atom was immobilized onto the pore wall of 3DOM CLPS by chloromethylation. FT-IR and TG-DWA analyses confirm that the graft polymerization of MMA and NIPAm via ATRP had been taken place at the pore wall of 3DOM CLPS. The initiating efficiency of chloromethyl groups was calculated according to the data of TGA-titration, revealed that the benzyl chloride is not only distributed on the surface of the pore walls but also must be present throughout the inner of the cross-linked polystyrene matrix. SEM analyses show that the grafted layers are smooth and homogeneous, and the ordered structure is well preserved after polymerization. By the adjustment of the graft polymerization time, the thickness of grafted polymer layers can be controlled. The max thickness of grafted PMMA layer is 85 nm and the max thickness of grafted PNIPAm layer is 35 nm.     

Polystyrene‐graft‐poly(ethylene oxide) copolymers prepared by macromonomer technique in dispersion. I. Liquid chromatographic separation of product mixtures

Products of the radical dispersion copolymerization of methacryloyl‐terminated poly(ethylene oxide) (PEO) macromonomer and styrene were separated and characterized by size exclusion chromatography (SEC), full adsorption‐desorption (FAD)/SEC coupling and eluent gradient liquid adsorption chromatography (LAC). In dimethylformamide, which is a good solvent for PEO side chains but a poor solvent for polystyrene (PS), amphiphilic PS‐graft‐PEO copolymers formed aggregates, which were very stable at room temperature even upon substantial dilution. The aggregates disappeared at high temperature or in tetrahydrofuran (THF), which is a good solvent for both homopolymers and for PS‐graft‐PEO. FAD/SEC procedure allowed separation of homo‐PS from graft‐copolymer and determination of both its amount and molar mass. Effective molar mass of graft‐copolymer was estimated directly from the SEC calibration curve determined with PS standards. Presence of larger amount of the homo‐PS in the final graft‐copolymer products was also confirmed with LAC measurements. The results indicate that there are at least two or maybe three polymerization loci; namely the continuous phase, the particle surface layer and the particle core. The graft copolymers are produced mainly in the continuous phase while PS or copolymer rich in styrene units is formed mostly in the core of monomer‐swollen particles. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 2284–2291, 2000     

两性纤维素接枝共聚物的研究Ⅰ. 两性共聚物的合成

用过硫酸铵和四甲基乙二胺氧化还原引发体系合成了羧甲基纤维素接枝甲基丙烯酸二甲胺基乙酯两性共聚物（ＣＧＤ）,研究了反应温度、ｐＨ、原料羧甲基取代度、引发剂用量、反应物料配比和外加盐对接枝共聚的影响,并用红外光谱对接枝共聚物结构进行了鉴定     

Effect of graft polymer prepared by living radical polymerisation on electro-optical properties of polymer dispersed liquid crystal

In this study, a graft polymer matrix prepared by living radical polymerisation had been incorporated into polymer dispersed liquid crystals (PDLCs). The electro-optical properties of the PDLCs were investigated. The results showed that the length and density of graft chain had a great influence on the memory effect of the PDLCs. Low-driving-voltage and weak-memory-effect PDLCs could easily be obtained with a graft polymer matrix.     

Chitooligosaccharide Copolymers: Synthesis and Aqueous Self-assembly

Novel water-soluble amphiphilic graft copolymers (COS-g-PCL-b-MPEG) were synthesized by the coupling reaction between chitooligosaccharide (COS) and MPEG-b-PCL-COOH, which was synthesized via ring-opening polymerization of ε-caprolactone (CL) using MPEG as an initiator and subsequent carboxylation by succinic anhydride. The chemical composition of the graft copolymers was confirmed by ¹H-NMR spectra and FT-IR spectrometry. The thermal properties and crystallinity of the copolymers were observed by DSC and XRD measurements, which showed the existence of separate backbone and graft chain phases in the copolymer. The micellar behavior via self-assembly of the graft copolymers in aqueous solution was studied using pyrene fluorescence dye technique. AFM measurements showed that the micelles had a spherical morphology at the critical micelle concentration (CMC) and ranged in size from 20–45 nm. The amphiphilic ternary biodegradable graft copolymer endows the hydrophilic outer shell of micelles with structural and functional diversification, which might be desirable for drug delivery applications.     

SYNTHESIS OF POLYACRYLAMIDE WITH PENDANT POLY(BUTYL ACRYLATE) CHAINS USING THE MACROMER TECHNIQUE AND STUDIES ON THEIR PROPERTIES

INTRODUCTIONSince Milkovich and Chiang[1] developed a method of preparing copolymers with uniform side chains by usingthe macromer technique, the synthesis of copolymers with uniform side chains from different macromers hasbeen studied extensively. Milkovich et al. reported the synthesis of polystyrene macromer through termination ofliving polystyrene anions with methacryloyl chloride and its copolymerization with butyl acrylate to formthermoplastic elastomer[2]. Rempp[3] obtained polyoxy…     

Effect of matrix bidispersity on the morphology of polymer-grafted nanoparticle-filled polymer nanocomposites

We present a simulation study showing the effect of bidispersity in matrix homopolymer length on the wetting/dewetting of homopolymer-grafted nanoparticles and the morphology of polymer nanocomposites where the graft and matrix polymer chemistries are identical. In a bidisperse matrix with equal number of short and long chains and average matrix length greater than the monodisperse graft length, the densely grafted polymer layer is preferentially wet by the short chains and relatively dewet by the long chains. This is driven by a larger gain in entropy of mixing between graft and matrix for short matrix chains than long matrix chains. Despite the preferential wetting of the short and dewetting of long chains, matrix length bidispersity does not significantly change the overall wetting of the grafted layer. Unlike graft length bidispersity that significantly improves particle dispersion, matrix length bidispersity slightly increases particle aggregation in the polymer matrix. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2014 , 52, 1661–1668     

PREPARATION AND SWELLING PROPERTIES OF SUPER-ABSORBENT POLYMER

A super-absorbent polymer is prepared by graft polymerizing acrylamide (AM) ontopotato starch using ceric ammonium nitrate (CAN) and N, N′-methylene-bis-acrylamide(bisAM) as an initiator and cross-linking agent respectively, and then subjecting the potatostarch-poly(acrylamide) (PAM) graft copolymer (SPAM ) to alkaline saponification. Thewater absorbency (WA) of the sample is nearly 5000 g H_2O/g for dry sample in 24 hat room temperature and is far larger than that of reported in the literature. Thevariables affecting the WA were investigated and optimized, they were: concentrations ofpotato starch, AM, CAN and bisAM were 26.3 g/L, 1.14 mol/L, 10.3 mmol/L and 0.53mmol/L, respectively. The amount of sodium hydroxide was 15 g and the temperatures ofgraft copolymerization and saponification reactions were 60℃ and 95℃. The time of graftcopolymerization and saponification reactions was 2 h, respectively.