用于彩色光照粒子图像测速的粒子场模拟成像

分析了基于彩色光照的粒子图像测速算法中示踪粒子的成像原理,并根据实际流场中的应用环境以及彩色粒子图像测速算法的实验条件,采用一套由白色光源和波长线性变化的滤波片组成的照明系统,为粒子场提供不同深度、相同光强的彩色体积光照明.根据针孔相机模型和其对应的点扩散函数,建立示踪粒子的三维成像模型,得到在彩色体积光照射下流场中的...     

用于层析粒子图像测速的模拟粒子场成像

对层析粒子图像测速(PIV)技术中示踪粒子成像部分进行理论分析,并结合真实风洞的相应参数,通过搭建模拟粒子成像平台的方法来进行研究。设计了一套体积为80 mm×100 mm×100 mm的激光照明系统,以提供粒子场的入射光强。建立了示踪粒子的三维成像模型,从而得到层析PIV系统的模拟图像。分析了影响PIV系统成像质量的相关因素。在单像素粒子数为0.007 7的情况下,通过真实粒子图像和模拟粒子图像比较,验证了该方法的正确性。     

扩散燃烧流场的PIV测试方法探讨

由于能提供高时空分辨率的瞬时流场信息,二维粒子成像速度仪(PIV)已广泛应用于燃烧流场的测量.本文利用PIV对甲烷同轴射流扩散燃烧的流场进行了测量,针对测量中出现的示踪粒子导入、火焰发光干涉、光强不均、数据处理等问题进行了分析和实验,获得了有效的解决办法和满意的测量结果.     

消像散型Czerny-Turner成像光谱仪图像变形校正研究

Czerny-Turner结构成像光谱仪像散校正会改变系统焦距,导致图像子午方向和弧矢方向放大率存在差异。分析了两种Czerny-Turner结构成像光谱仪像散校正光路(柱面镜和超环面)像散校正原理,由此提出并推导出两类光谱图像变形校正公式和方法,并总结二者的共同特征。通过理论计算、光线追迹仿真和实际光谱成像测量验证了图像变形校正方法的正确性。同时,该图像校正方法对其他准直光工作条件下离轴结构色散型成像光谱仪图像变形校正研究有借鉴意义。     

PIV技术在气体界面不稳定性实验研究中的应用

采用粒子图像测速(Particle Image Velocimetry,PIV)技术,以乙二醇烟雾作为示踪粒子,实验测量了平面激波作用下SF6气柱-空气界面Richtmyer-Meshkov不稳定性演化图像和二维速度场.测量结果揭示了不稳定性流场的典型特征和细微结构,与高速摄影和数值模拟结果符合,说明建立的PIV技术适...     

一种改进的光场μPIV反卷积重建算法

光场显微粒子图像测速技术(μPIV)利用Lucy-Richardson反卷积算法重建粒子场时需进行多次迭代计算,重建耗时长.为提高重建效率,本文利用光场μPIV流场测量过程中示踪粒子稀疏分布的特点,提出一种改进的反卷积重建算法.该算法以粒子场中非零元素与对应点扩散函数的乘积和代替粒子场与点扩散函数的卷积运算,减少了反卷...     

用于人眼视网膜成像照明的激光消散斑技术研究

以近红外激光(808 nm)作为人眼波前像差探测的信号光和视网膜成像的照明光,液晶空间光调制器(LCOS)作为波前校正器,用哈特曼波前探测器探测人眼像差,构建了人眼像差自适应校正的视网膜成像系统.利用模拟眼分析了激光散斑对相机成像的影响和对哈特曼波前探测器进行像差探测的影响,同时验证了利用旋转散射体的方法消除激光散斑的可行性和有效性;用活体人眼进行了激光消散斑前后照明视网膜进行成像的对比实验,并进一步利用自适应光学技术实现了对人眼像差的动态校正和视网膜细胞的连续成像.校正后,系统波前像差的均方根值小于0.1λ.实验表明激光消散斑后可以同时作为人眼像差探测的信号光和视网膜成像的照明光,从而可以进行连续自适应校正和成像.     

应用于微细流场的全息荧光粒子图像三维测速系统

利用亚微米荧光示踪粒子的离焦微细观测时的衍射图样,可以分析确定荧光粒子垂直于图像平面的轴向的位置, 实现对示踪粒子的三维定位．再结合应用于二维流畅测速领域的PIV技术,可利用全息荧光粒子图像测速技术实现流体速度分布的三维测量。     

基于光学涡旋相移技术的离面位移测量

设计了基于光学涡旋相移技术的离面位移测量实验方案,实现了电子散斑干涉中相移的数字控制.该方法利用输入液晶空间光调制器中的叉形光栅产生涡旋光束,通过涡旋光束绕轴的旋转产生相移;同时,产生的涡旋光束又作为参考光与物光干涉.实验中,在物体发生离面位移前后依次输入四幅叉形光栅,产生相移步长为π/2的涡旋光束,利用CCD获得涡旋光与物光的干涉光场,从而获得离面位移场的包裹相位;再通过解包裹,获得物体离面变形的相位变化.光学涡旋相移法可应用于离面位移测量.     

激光透射成像法测量石英管的外径与壁厚

为了同时同位测量石英管的外径和壁厚,建立了激光透射成像系统,对系统测量原理进行研究。基于几何光学和菲涅尔公式,分别导出平行光垂直照射石英管后的透射光线偏向角、相对光强与入射光线离轴距离之间的关系;通过数值计算,分析了偏向角、相对透射光强随入射光线离轴距离的变化特点;针对物方远心光路,分析了光阑对偏向角和相对光强的限制;基于CCD成像原理,通过引入标定系数和补偿因子,导出石英管外径与壁厚的计算公式。实验结果表明:外径绝对误差和相对误差的平均值分别为0.119mm和0.91%,壁厚绝对误差和相对误差的平均值分别为0.153mm和6%。     

Dynamic phase-contrast stereoscopy for microflow velocimetry

A nonlinear dynamic phase-contrast stereoscope has been developed for the measurement of all three velocity components of a microfluidic flow field. The stereoscope system captures simultaneously two images of different off-axis views of the same region of interest in a microflow, seeded with tracer particles. Two independent photorefractive two-beam coupling novelty filters, one in each stereoscope channel, are employed to enhance the contrast of tracer particle images. A subsequently applied particle tracking algorithm extracts the velocity information from the images, and in first experiments the axial velocity components could be determined with an error of less than 5%. Finally we report on the determination of the velocity field in a rectangular microchannel with a 170 μm high microstep with the dynamic phase-contrast stereoscope.     

Evaluation of the cross correlation method by using PIV standard images

Effects of various parameters for PIV image acquiring and processing on the final velocity field is studied by using PIV standard images (Okamoto et al., 1997) to evaluate the cross correlation method. The studied parameters include the size of interrogation window, the size of search window, the number of tracer particles, the diameter of tracer particles, out-of-plane velocity and average image velocity or the time interval between two images. In order to improve the PIV sub-pixel accuracy, the validity of the “sub-pixel interpolation” process also is discussed in the paper. Some useful conclusions are suggested for the optimal parameter selection for a final PIV result with high accuracy.     

An experimental investigation of flow-induced acoustic resonance and flow field in a closed side branch system using a high time-resolved PIV technique

Abstract  

Systems with closed side branches are liable to an excitation of sound known as cavity tone. It may occur in pipe branches leading to safety valves or to boiler relief valves. The outbreak mechanism of the cavity tone has been ascertained by phase-averaged pressure measurements in previous research, while the relation between sound propagation and the flow field is still unclear due to the difficulty of detecting the instantaneous velocity field. It is possible to detect the two-dimensional instantaneous velocity field using high time-resolved particle image velocimetry (PIV). In this study, flow-induced acoustic resonance in a piping system containing closed side branches was investigated experimentally. A high time-resolved PIV technique was used to measure the gas flow in a cavity. Airflow containing oil mist as tracer particles was measured using a high-frequency pulse laser and a high-speed camera. The present investigation on the coaxial closed side branches is the first rudimentary study to visualize the fluid flow two-dimensionally in a cross-section using high time-resolved PIV, and to measure the pressure at the downstream side opening of the cavity by microphone. The fluid flows at different points in the cavity interact, with some phase differences between them, and the relation between the fluid flows was clarified.     

Combined two-dimensional velocity and temperature measurements using a high-speed camera and luminescent particles

This paper proposes a combined method for two-dimensional temperature and velocity measurements using temperature sensitive particles (TSParticles), a pulsed ultraviolet (UV) laser and a single high-speed camera. TSParticles were synthesized using ion-exchange particles and Eu(TTA) luminescent dye. The size and material of the particles for synthesizing TSParticles are selectable. TSParticles respond to temperature changes in a flow and can also serve as tracers for the velocity field. TSParticles were seeded into a heated water flow in a complex-shaped channel constructed of MEXFLON resin, which has a refractive index exactly equal to that of water. Particle images of flow beyond the structure can be recorded without any distortion. The TSParticles were excited by the UV pulsed laser and the luminescence from the TSParticles were recorded at 40,000 frames per second as sequential images for a lifetime-based temperature analysis. Another advantage of our approach is that high time-resolved PIV can be carried out without a high-frequency laser. The recorded images were also used for the particle image velocimetry (PIV) calculation.     

高速流动PIV示踪粒子跟随性分析

通过理论推导提出了一种评价高速流动PIV示踪粒子随流能力的松弛特性分析模型,在法向Mach数大于1.4时具有良好的适用性.将新模型应用于试验测量,发展了高速流动PIV系统和示踪粒子布撒技术,验证了高速流动PIV的定量化测量能力.针对空间发展的二维超声速气固两相混合层,数值模拟了不同Stokes数和对流Mach数（M_c）下的粒子跟随性以及弥散和迁徙运动,结果表明:相同对流Mach数,粒径越小的示踪粒子跟随性越好,Stokes数在[1, 10]范围内的粒子有最大扩散距离.示踪粒子的直径大小决定其在超声速混合层大涡拟序结构中的分布特征,且粒径越小,气体与粒子的掺混越剧烈.相同粒径的粒子,对流Mach数越大跟随性越差.      

Development and evaluation of an improved correlation based PTV method

An improved correlation based Particle Tracking Velocimetry (PTV) algorithm was proposed in the present paper. The path tracking of the tracer particles was achieved through a correlation operation of the small interrogation window around the studied tracer particles at two-time steps. The central positions of the tracer particles were determined by the correlation operation of the tracer particle image with a Gaussian particle mask in order to improve the accuracy to identify the central positions of particles up to sub-pixel level. The performance of the present improved correlation based Particle Tracking Velocimetry (PTV) algorithm was evaluated by using both synthetic VSJ standard PIV images and actual PIV images of a self-induced sloshing. Compared with other conventional PTV methods, the present improved correlation based PTV algorithm was found to be able to provide better solution and more robust for suppression the effect of background noise in the PIV images.     

Flow field around growing and rising vapour bubble by PIV measurement

A study on flow field measurement around growing and rising vapour bubbles by use of PIV technique is presented. Bubbles were generated from single artificial cavities. Experiments have been conducted with saturated boiling of distilled water at atmospheric pressure. In the experiment fluid velocity field surrounding the bubbles was visualized by use of polyamide tracer particles and a sheet of a YAG pulse laser beam. The images were recorded with a cross-correlation CCD-camera. It has been shown that for lower heat flux density bubble growths in an almost quiescent bulk of liquid. For higher heat flux density the train of bubbles creates a vapour column with strong wake effect. Maximum liquid velocity recorded is approximately equal to the terminal velocity of bubble rising in a stagnant liquid.     

Application of DPIV to study both steady state and transient turbomachinery flows

Digital particle imaging velocimetry (DPIV) is a powerful measurement technique, which can be used as an alternative or complementary approach to laser doppler velocimetry (LDV) in a wide range of research applications. The instantaneous planar velocity measurements obtained with PIV make it an attractive technique for use in the study of the complex flow fields encountered in turbomachinery. The planar nature of the technique also significantly reduces the facility run time over point-based techniques. Techniques for optical access, light sheet delivery, CCD camera technology and particulate seeding are discussed. Results from the successful application of the PIV technique to both the blade passage region of a transonic axial compressor and the diffuser region of a high speed centrifugal compressor are presented. Both instantaneous and time-averaged flow fields were obtained. The averaged flow field measurements are used to estimate the flow turbulence intensity. The instantaneous velocity vector maps obtained during compressor surge provide previously unobtainable insight into the complex flow field characteristics occurring during short lived surge events. These flow field maps illustrate the true power of the DPIV technique.     

A real-time video encoded particle imaging tracking technique for velocity measurement

A real-time video encoded particle imaging tracking technique (VPIT) for velocity measurement has been developed. It can currently capture images of a seeded particle flow field at up to a video rate of 25 pictures per second. The method as shown in this paper is suitable for measuring a slow sparsely seeded flow. A VPIT image presents a triplet image pattern. The image has been encoded into a single video frame with the time history of three events. This is achieved by synchronising the video (CCIR) signal from a CCD (charge coupled device) camera, operating in frame integration mode with a suitable light source. The principle of VPIT demonstrates how the direction and the magnitude of the velocity can be recorded for a sequence or track of particles. The VPIT triplet images resolve several common difficulties associated with the application of PIV. Firstly, the time history of the laser pulse can be ‘labeled’ on an individual particle image. Secondly, there is no velocity direction ambiguity in the VPIT image. Thirdly, it is possible to extract the acceleration of the particle from a single VPIT frame. Finally, for a sequence of captured frames, the problems of particle path tracking are simplified, because each VPIT image has a video encoded time sequence ‘labelled’ on it.     

多光谱成像的粒子图像测速

基于时间分辨的粒子图像测速技术(time-resolved particle image velocimetry, TR-PIV)是一种广泛应用的非接触式二维瞬时流场可视化测量技术。为了得到流场精细的瞬态空间结构和演变过程,提出了一种利用多光谱成像技术来提高流场测量的时间分辨率的方法。利用多个不同波长的脉冲激光照明流场中的同一测量区域,使用多光谱成像系统采集不同波长的粒子图像,经过图像分离,判决计算产生速度矢量场。为了验证这一原理的可行性,使用三种不同波长(488,532和632.8 nm)的单色光谱脉冲搭建了一套基于多光谱成像的TR-PIV系统,通过多波长激光脉冲之间时序的精确控制,将两帧图像之间的时间间隔从10 ms缩短至3.4 ms,时间分辨率提高了3倍。结果表明基于多光谱的TR-PIV测量系统在保持PIV技术瞬时全场测量特点的同时,时间分辨率大为提高。