SnO2 nanowires mixed nanodendrites for high ethanol sensor response

Mixed morphology of SnO₂ nanowires and nanodendrites was synthesized on the gold-coated alumina substrates by carbothermal reduction of SnO₂ in closed crucible. The products were characterized by scanning electron microscopy, x-ray diffractometer, and transmission electron microscopy. Results showed the SnO₂ nanowires and the SnO₂ nanodendrites branched out from the main nanowires. Both SnO₂ nanostructures were pure tetragonal rutile structure. The nanowires were grown in [101] and directions with the diameter of 50–150 nm and the length of a few 10 μm. The nanodendrites were about 100–300 nm in diameter. The growth mechanism of the SnO₂ nanostructures was also discussed. Characterization of ethanol gas sensor, based on the mixed morphology of the SnO₂ nanostructures, was carried out. The optimal temperature was about 360 °C and the sensor response was 120 for 1000 ppm of ethanol concentration.     

Electrical, structural and surface properties of fluorine doped tin oxide films

Fluorine (F) incorporated polycrystalline SnO₂ films have been deposited onto glass substrates by ultrasonic spray pyrolysis technique. To possess information about the electrical properties of all films, their electrical conductivities were investigated depending on the temperature, and their activation and trap energies were analyzed. The crystalline structure, surface properties and elemental analysis of the SnO₂ films were examined to determine the effect of the F element. After all investigations, it was concluded that each fluorine incorporation rate has a different and important effect on the physical properties, and SnO₂:F (3 at%) films were found to be the most promising sample for energy conversion devices, especially as conducting electrode in solar cells with its improved structural and electrical properties as compared to others.     

DFT calculations for Au adsorption onto a reduced TiO2 (110) surface with the coexistence of Cl

Residual chlorines, which originate from HAuCl₄, enhance the aggregation of gold (Au) nanoparticles and clusters, preventing the generation of highly active supported Au catalysts. However, the detailed mechanism of residual-chlorine-promoted aggregation of Au is unknown. Herein to investigate this mechanism, density functional theory (DFT) calculations of Au and Cl adsorption onto a reduced rutile TiO₂ (110) surface were performed using a generalised gradient approximation Perdew, Burke, and Ernzerhof formula (GGA–PBE) functional and plane-wave basis. Although both Au and Cl atoms prefer to mono-absorb onto oxygen defect sites, Cl atoms have a stronger absorption onto a reduced TiO₂ (110) surface, abbreviated as rTiO₂ (110) in the following, than Au atoms. Additionally, co-adsorption of a Cl atom and a Au atom or Au nanorod onto a rTiO₂ surface was investigated; Cl adsorption onto an oxygen defect site weakens the interaction between a Au atom or Au nanorod and rTiO₂ (110) surface. The calculation results suggest that the depletion of interaction between Au and rTiO₂ surface is due to strong interaction between Cl atoms at oxygen defect sites and neighbouring bridging oxygen (O^B) atoms.     

Characterization of nanocrystalline SnO2 thin film fabricated by electrodeposition method for dye-sensitized solar cell application

Nanocrystalline SnO₂ thin film was prepared by cathodic electrodeposition-anodic oxidation and its structure was characterized by X-ray diffraction, SEM, UV-visible absorption and nitrogen adsorption-desorption by BET method. The obtained film has a surface area of 137.9 m²/g with grain sized of 24 nm. Thus the prepared SnO₂ thin film can be applied as an electrode in dye-sensitized solar cell. The SnO₂ electrode was successfully sensitized by Erythrosin dye and photoelectrochemical measurements indicate that the cell present short-circuit photocurrent (J_sc) of 760 μA/cm², fill factor (FF = 0.4), photovoltage (V_oc = 0.21 V) and overall conversion efficiency (η) of 0.06% under direct sun light illumination. The relatively low fill factor and photovoltage are attributed to the reduction of triodiode by conduction band electrons and intrinsic properties of SnO₂.     

Frequency measurements on far-infrared emissions from12C16O2-pumped methyl chloride and from12C18O2-pumped difluoromethane

The frequencies of 42 far-infrared laser lines have been measured by mixing with high-order harmonics of microwave frequencies in a Josephson junction. A total of 5 emissions between 334 and 1887 m have been measured from¹²C¹⁶O₂-pumped methyl chloride (CH₃Cl) and 37 emissions between 116 and 1092 m in¹²C¹⁸O₂-pumped difluoromethane (CH₂F₂). Additional data is given on the laser emission characteristics.Division of Electrical Science, National Physical Laboratory     

CdTe太阳电池前电极SnO2:F/SnO2复合薄膜性能分析

减薄CdS窗口层是提高CdS/CdTe太阳电池转换效率的有效途径之一,减薄窗口层会对器件造成不利的影响,因此在减薄了的窗口层与前电极之间引入过渡层非常必要.利用反应磁控溅射法在前电极SnO₂:F薄膜衬底上制备未掺杂的SnO₂薄膜形成过渡层,并将其在N₂/O₂=4 ∶1,550 ℃环境进行了30 min热处理,利用原子力显微镜、X射线衍射仪、紫外分光光度计对复合薄膜热处理前后的形貌、结构、光学性能进行了表征,同时分析了复     

Chemical synthesis of nanocrystalline SnO2 thin films for supercapacitor application

Nanocrystalline SnO₂ thin films were deposited by simple and inexpensive chemical route. The films were characterized for their structural, morphological, wettability and electrochemical properties using X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), scanning electron microscopy techniques (SEM), transmission electron microscopy (TEM), contact angle measurement, and cyclic voltammetry techniques. The XRD study revealed the deposited films were nanocrystalline with tetragonal rutile structure of SnO₂. The FT-IR studies confirmed the formation of SnO₂ with the characteristic vibrational mode of Sn-O. The SEM studies showed formation of loosely connected agglomerates with average size of 5-10 nm as observed from TEM studies. The surface wettability showed the hydrophilic nature of SnO₂ thin film (water contact angle 9°). The SnO₂ showed a maximum specific capacitance of 66 F g⁻¹ in 0.5 Na₂SO₄ electrolyte at 10 mV s⁻¹ scan rate.     

First-principle study of electronic structure and stability of Sn0.5Sb0.5O2

A theoretical study on Sb-doped SnO₂ has been carried out by means of periodic density functional theory (DFT) at generalized gradient approximation (GGA) level. Stability and conductivity analyses were performed based on the formation energy and electronic structures. The results show that Sn_0.5Sb_0.5O₂ solid solution is stable because the formation energy of Sn_0.5Sb_0.5O₂ is −0.06 eV. The calculated energy band structure and density of states showed that the band gap of SnO₂ narrowed due to the presence of the Sb impurity energy levels in the bottom of the conduction band, namely there is Sb 5s distribution of electronic states from the Fermi level to the bottom of conduction band after the doping of antimony. The studies provide a theoretical basis to the development and application of Sn_1−xSb_xO₂ solid solution electrode.     

Influence of CuO catalyst in the nanoscale range on SnO2 surface for H2S gas sensing applications

The dispersal of CuO catalyst on the surface of the semiconducting SnO₂ film is found to be of vital importance for improving the sensitivity and the response speed of a SnO₂ gas sensor for H₂S gas detection. Ultra-thin CuO islands (8 nm thin and 0.6 mm diameter) prepared by evaporating Cu through a mesh and subsequent oxidation yield a fast response speed and recovery. Ultimately nanoparticles of Cu (average size = 15 nm) prepared by a chemical technique using a reverse micelle method involving the reduction of Cu(NO₃)₂ by NaBH₄ exhibited significant improvement in the gas sensing characteristics of SnO₂ films. A fast response speed of ∼14 s and a recovery time of ∼60 s for trace level ∼20 ppm H₂S gas detection have been recorded. The sensor operating temperature (130° C) is low and the sensitivity (S = 2.06 × 10³) is high. It is found that the spreading over of CuO catalyst in the nanoscale range on the surface of SnO₂ allows effective removal of excess adsorbed oxygen from the uncovered SnO₂ surface due to spill over of hydrogen dissociated from the H₂S-CuO interaction.     

Controllable synthesis and highly efficient electrocatalytic oxidation performance of SnO2/CNT core-shell structures

In this work, the nanocomposites, carbon nanotubes (CNTs) coated with nanosized uninterrupted SnO₂, were prepared controllably by a facile solvothermal method. The obtained nanocomposites have a thin overlayer which is made of nanoparticles with a diameter of ∼3 nm. The products were characterized by X-ray diffraction and transmission electron microscopy. The obtained SnO₂/CNTs have an excellent electrocatalytic oxidation performance for the X-3B, a kind of dye. The parameters affecting the electrocatalytic activity were investigated in details. The excellent catalytic property of the SnO₂/CNT electrodes can be explained as follows: (1) high specific surface area gives more active sites for X-3B oxidation; (2) the formation of thin, uniform, and uninterrupted coverage of SnO₂ nanoparticles on CNTs raises the potential of oxygen evolution and the current efficiency; and (3) the CNTs increase the conductivity of the electrodes, which results in the increase of the current efficiency.     

SnO2:Eu nanoparticles dispersed in silica: A low-temperature synthesis and photoluminescence study

SnO₂:Eu and SnO₂:Eu nanoparticles dispersed in silica matrix were prepared at a relatively low temperature of 185 °C in ethylene glycol medium. For as-prepared SnO₂:Eu nanoparticles there exists a weak energy transfer from the SnO₂ host to the Eu³⁺ ions. However, the energy transfer can be significantly improved by dispersing the Eu³⁺-doped SnO₂ nanoparticles in silica matrix. Effective shielding of surface Eu³⁺ ions in SnO₂:Eu nanoparticles from the stabilizing ligand by silica matrix is the reason for the improved extent of energy transfer. Increase in asymmetric ratio of luminescence (ratio of the intensity of the electric dipole allowed transition, ⁵D₀→⁷F₂, to magnetic dipole allowed transition, ⁵D₀→⁷F₁) for SnO₂:Eu nanoparticles dispersed in silica compared to that of SnO₂:Eu nanoparticles, has been attributed to the distorted environment around surface Eu³⁺ ions brought about by the presence of both tin and silicon structural units. ¹¹⁹Sn and ²⁹Si MAS NMR studies on this sample confirmed that there is no interaction between the tin and silicon structural units even after heating the samples at 900 °C.     

Resistive switching effect in metal–oxide–metal structures with ZnO:Li oxide layer

The resistive switching effect in metal–oxide–metal (MOM) structures has been investigated, where the 10% Li-doped ZnO layer was used as an oxide layer, as well as Pt and 20% fluorine doped SnO₂ (SnO₂:F) were used as a bottom electrodes. The current–voltage (I–V) and switching (I–t) characteristics of Ag/ZnO:Li/Pt and Ag/ZnO:Li/SnO₂:F structures were investigated. The unipolar resistive switching is detected in the structures with the Pt, while the use of transparent conductive SnO₂:F electrode instead of Pt, results to the bipolar memory effect.     

Gd-doped SnO2 nanoparticles: Structure and magnetism

Gd-doped SnO₂ nanoparticles were chemically prepared doping 0-12.5% Gd into SnO₂ and calcined at 600 °C. X-ray diffraction and Fourier transformed infrared spectroscopy measurements show the formation of single phase of Sn_1−xGd_xO₂ up to x=0.0625 while at x=0.125, an additional secondary phase of tetragonal GdO₂ (not cubic Gd₂O₃) is detected. The transmission electron microscopy studies show that the individual particles are single crystalline with an average size in the range of 10-12 nm. Magnetization measurements show the absence of ferromagnetic and antiferromagnetic ordering in all samples; however surface spin effects and enhanced Gd-O-Gd interactions are proposed to account for the observed magnetic properties of the samples.     

Fabrication of textured SnO2:F thin films by spray pyrolysis

Transparent conductive SnO₂:F thin films with textured surfaces were fabricated on soda-lime-silica glass substrates by spray pyrolysis. Structure, morphology, optical and electrical properties of the films were investigated. Results show that the film structure, morphology, haze, transmittance and sheet resistance are dependent on the substrate temperature and film thickness. An optimal 810 nm-thick SnO₂:F film with textured surface deposited at 520 °C exhibits polycrystalline rutile tetragonal structure with a (2 0 0) orientation. The sheet resistance, average transmittance in visible region, and haze of this film were 8 Ω/□, 80.04% and 11.07%, respectively, which are suitable for the electrode used in the hydrogenated amorphous silicon solar cells.     

SnO2 / In2O3 one-dimensional nano-core-shell structures: Synthesis, characterization and photoluminescence properties

SnO₂/In₂O₃ one-dimensional nano-core-shell structures have been synthesized at 1350 ^°C by thermal evaporation of the mixture of metal Sn, Fe(NO₃)₃ powders and In particles. The as-synthesized products have been characterized by energy-dispersive X-ray spectroscopy, selected-area electron diffraction and high-resolution transmission electron microscopy. Microstructure characterization indicates the orientation relationship between core and shell is , . The formation mechanism of this nano-core-shell structure can be attributed to the cover of In₂O₃ on the surface of SnO₂ nanochains. The photoluminescence properties of the nano-core-shell structures have been measured. The PL spectrum shows some difference with the result from pure SnO₂ and In₂O₃ nanostructure that be deemed to relate to interface defects in SnO₂/In₂O₃ nano-core-shell structure.     

Effect of a single water molecule on the formations of H2O2 + ClO from HO2 + HOCl reaction under tropospheric conditions

ABSTRACT

In this work, four different channels, represented by H₂O???HO₂ + HOCl, HO₂???H₂O + HOCl, H₂O???HOCl + HO₂ and HOCl???H₂O + HO₂ have been analysed for water-catalysed formations of H₂O₂ + ClO to gain insight into the potential impact of the reaction in the atmosphere. The results at the CCSD(T)/aug-cc-pVTZ//MP2/6-311+G(2df,2p) level show that the H₂O???HO₂ + HOCl reaction is kinetically the most favourable channel among the four channels. Compared to the channel of H₂O₂ + ClO formations without water vapour, the effective rate constant of H₂O???HO₂ + HOCl reaction is estimated to be faster than the naked reaction by 2–3 orders of magnitude, indicating that the single water molecule in the H₂O???HO₂ + HOCl channel exhibits a positive catalytic effect on enhancing the rate of H₂O₂ + ClO formations. Meanwhile, it is interesting that the transfer process between H₂O???HOCl + HO₂ and H₂O???HO₂ + HOCl has an activation energy of 0.6 kcal?mol^?1 and can occur easily under tropospheric conditions.     

Magnetic and electronic properties of Cr- and Mn-doped SnO2: ab initio calculations

The ab initio calculations, based on the Korringa–Kohn–Rostoker (KKR) approximation method combined with the coherent potential approximation (CPA), indicated as KKR–CPA, have been used to study the stability of ferromagnetic and ferrimagnetic states, for systems that are SnO₂ doped and co-doped with two transition metals, that is, chromium and manganese. Our results indicate that the ferromagnetic state is more stable than the spin-glass state for the (Sn_1−xCr_xO₂; x = 0.07, 0.09, 0.12 and 0.15)-doped system, while the spin-glass state is more stable than the ferromagnetic state for the (Sn_1−xMn_xO₂; x = 0.02 and 0.05)-doped system. However, the ferromagnetic and/or the ferrimagnetic states are stable for the (Sn_0.98−xMn_0.02Cr_xO₂; x = 0.05, 0.09 and 0.13)-doped system depending on the Cr concentration. Moreover, we estimated the Curie temperature (T_c) for the Cr-doped tin dioxide (SnO₂), and we explained the origin of magnetic behaviour through the total density of states for different doped and co-doped SnO₂ systems.     

Emission characteristics of diameter controlled SnO2 nanowires

SnO₂ nanowires with controlled diameters were grown by chemical vapor deposition process for which four different diameters ranging from 50 to 140 nm were grown by the controlling thickness of gold-thin-films as catalysts. The influence of the diameter-to-thickness ratio as well as the mechanism of its formation was studied. The relationship between photoluminescence intensities and aspect ratio with considering surface effects of SnO₂ nanowires was also investigated. The room temperature luminescence intensity was diminished with decreasing the diameter of nanowires due to the increasing surface/volume ratio. The transition energy and emission intensity show abnormal behavior as temperature decreased from room temperature to 5 K.     

Facile synthesis and optical property of SnO2 flower-like architectures

Two-dimensional (2D) hierarchical tin dioxide (SnO₂) flower-like architectures consisting of sheet-like nanoparticles have been successfully prepared by a simply mild hydrothermal method based on the reaction between tin foil, NaOH and KBrO₃. The photoluminescence (PL) spectrum exhibit that the flower-like architectures of SnO₂ have strong PL emission, which suggest its possible applications in nanoscaled optoelectronic devices. The formation process of SnO₂ architectures is investigated and the corresponding mechanism is also proposed.