粘弹层合板的自由振动和横向应力

Based on Reddy＇s layerwise theory, the governing equations for dynamic response of viscoelastic laminated plate are derived by using the quadratic interpolation function for displacement in the direction of plate thickness. Vibration frequencies and loss factors are calculated for free vibration of simply supported viscoelastic sandwich plate, showing good agreement with the results in the literature. Harmonious transverse stresses can be obtained. The results show that the transverse shear stresses are the main factor to the delamination of viscoelastic laminated plate in lower-frequency free vibration, and the transverse normal stress is the main one in higher-frequency free vibration. Relationship between the modulus of viscoelastic materials and transverse stress is analyzed. Ratio between the transverse stress＇s maximum value and the in-plane stress＇s maximum-value is obtained. The results show that the proposed method, and the adopted equations and programs are reliable.     

NONLINEAR FLUTTER OF LAMINATED PLATES WITH IN-PLANE FORCE AND TRANSVERSE SHEAR EFFECTS*

Based on a simplified higher-order shear deformation plate theory (SDPT) and von Karman large deformation assumption, a high-precision higher-order triangular-plate element that can be used to deal with transverse shear effects is developed for the nonlinear flutter analysis of composite laminates. The element presents no shear-locking problem due to the assumption that the total transverse displacement of the plate is expressed as the sum of the displacement due to bending and that due to shear deformation. Quasi-steady aerodynamic theory is employed for the flutter analysis. Newmark numerical time integration method is applied to solve the nonlinear governing equation in time domain. Results show that the in-plane force on the plate will increase the maximum plate displacement but will not influence the maximum plate motion speed. However, the aerodynamic pressure will increase both the maximum displacement and velocity of the plate. The transverse shear will have profound influence on the flutter boundary for a thick plate and under certain conditions it will change the plate motion from buckled but dynamically stable to a limit-cycle oscillation.     

Resonant vibration and heating of ring plates with piezoactuators under electromechanical loading and shear deformation

The bending vibration and dissipative heating of a viscoelastic isotropic ring plate with piezoceramic actuators under electromechanical loading and shear deformation are studied by solving a coupled problem. The temperature dependence of the complex characteristics of the passive and piezoactive materials is taken into account. The nonlinear problem of thermoviscoelasticity is solved by time stepping with discrete orthogonalization used at each iteration to integrate the equations of elasticity and using an explicit finite-difference scheme to solve the heat-conduction equation with a nonlinear heat source. The effect of shear deformation, fixation conditions for the plate, the geometry of the piezoactuators, and the dissipative-heating temperature on the active damping of the forced vibration of a circular plate subject to uniform transverse monoharmonic compression is studied Translated from Prikladnaya Mekhanika, Vol. 45, No. 2, pp. 124–132, February 2009.     

THE SHEAR LAG EFFECT OF BOX BEAMS WITH VARYING LATERAL LOADING LOCATIONS 1)

对箱梁各翼板(顶板、悬臂板、底板)分设不同剪力滞广义纵向位移,其横向分布均取二次抛物线形式,并引入载荷横向位置参数η,以分析载荷横向变位对剪力滞效应的影响.运用能量变分原理,建立剪力滞控制微分方程,求解了简支梁和悬臂梁在均布载荷作用下的控制微分方程的解.算例分析表明:载荷横向变位改变直接承受载荷的翼板的正负剪力滞特性,对非直接承载翼板只改变其应力幅度;箱梁横向框架效应对直接承载翼板纵向应力的贡献远远大于剪切变形.与块体有限元分析结果较吻合,表明该算法能较准确分析载荷横向变位作用下箱梁剪力滞的变化规律.     

Shear effects on large amplitude forced vibration of symmetrically laminated rectilinearly orthotropic circular plates

I.IntroductionPlatesandshells'consistingoflaminatedcompositematerialsareimportantstructuralmembersinmodernengineering.Thustheresearchfornonlinearproblemsoftheseplatesandshellshasbecomeincreasinglyimportantl'~II].Especially.therehasalreadybeensomeresearchworktlz--lslonthenonlinearproblemoflaminatedcircularplates.Buttheeffectsoftransversestiearonthenonlinearvibrationoftheplateshavenotbeeddiscussedbecauseofthedifficultyofnonlinearmathematics.However,itisexpectedthatthesheareffectsonlaminatedcom…     

基于LCF-Kriging模型的结构多失效模式可靠度计算

针对多失效模式下结构体系可靠度计算中的代理模型构建成本与计算精度如何权衡的问题,本文以减小体系失效概率预测方差为出发点,推导出最大贡献函数（LCF-Largest Contribution Function）来识别对体系失效概率方差影响较大的样本。LCF函数可减少对体系失效概率方差影响较小区域内样本数量,进而提高代理模型的计算效率;通过置信水平和允许相对误差建立LCF函数的学习停止条件,能够保证已有样本信息不浪费。本文选取能够对多个功能函数联合构建的多输出Kriging模型作为代理模型,基于LCF-Kriging模型并结合MCS对体系可靠度进行计算,功能函数的相关性可通过各失效模式的逻辑关系予以考虑。数值算例表明,在适当的学习停止条件下,对于串联、并联和串并混联的结构体系可靠度评估,本文方法均能在计算精度和计算效率之间达到满意平衡。     

粘-弹层合悬臂板瞬态响应的近似解析解

采用双向梁函数组合级数逼近的方法构造粘-弹层合悬臂板的横向位移函数,用里兹法得悬臂板在集中力作用下的弯曲变形。用拉格朗日方程求出了板自由振动的频率和结构损耗因子;给出粘-弹层合悬臂板在集中力突然撤去以后瞬态响应的近似解析解。另外,分析了阻尼层损耗因子、弹性模量及厚度对响应的影响。     

基于应变梯度中厚板单元的石墨烯振动研究

基于应变梯度理论建立了单层石墨烯等效明德林(Mindlin) 板动力学方程,推导了四边简支明德林中厚板自由振动固有频率的解析解. 提出了一种考虑应变梯度的4 节点36 自由度明德林板单元,利用虚功原理建立了单层石墨烯的等效非局部板有限元模型. 通过对石墨烯振动问题的研究,验证了应变梯度有限元计算结果的收敛性. 运用该有限元法研究了尺寸、振动模态阶数以及非局部参数对石墨烯振动特性的影响. 研究表明,这种单元能够较好地适用于研究考虑复杂边界条件石墨烯的尺度效应问题. 基于应变梯度理论的明德林板所获得石墨烯的固有频率小于基于经典明德林板理论得到的结果. 尺寸较小、模态阶数较高的石墨烯振动尺度效应更加明显. 无论采用应变梯度理论还是经典弹性本构关系,考虑一阶剪切变形的明德林板模型预测的固有频率低于基尔霍夫(Kirchho) 板所预测的固有频率.      

Analysis of frequency-domain vibration response of thin plate attached with viscoelastic free layer damping

To predict the vibration response of viscoelastic composite structure, two key issues need to be conducted, one is introducing the constitutive model of viscoelastic material into the analysis model and the other is describing the real damping behavior of viscoelastic composite structure. The emphasis of this study is to obtain the effects of frequency dependence on the vibration response of viscoelastic composite structure and the method of introducing two kinds of damping (viscoelastic material damping and remaining equivalent viscous damping). Vibration response analysis in frequency domain was investigated for viscoelastically damped plate. A cantilever plate attached with the ZN_1 viscoelastic free layer damping (FLD) was chosen to demonstrate the developed method. Frequency-domain response of the composite plate were solved and the obtained results were compared with the experimental values for the purpose of assessing the rationality of the proposed method. In addition, in order to obtain the effects of viscoelastic material parameters on vibration response of viscoelastic composite structure, a detailed parametric analysis was performed. This study shows that the frequency dependent characteristic of viscoelastic material has significant influence on the vibration response in the resonant region and acceptable results can be achieved in the non-resonant region if frequency dependent parameters are substituted by average values of the viscoelastic parameters reasonably in the analysis process.     

Nonlinear harmonic response characteristics and experimental investigation of cantilever hard-coating plate

The nonlinear harmonic response of a cantilever hard-coating plate which is made of a layer of anisotropic hard-coating material and isotropic metal substrate is investigated based on the theory of high-order shear deformation of plate. Firstly, based on the theories of von Karman and Reddy’s three-order shear deformation, the nonlinear dynamic equations of hard-coating plate are built by Hamilton variation principle. Secondly, to obtain nonlinear governing equation of hard-coating plate under transverse load, these equations are discretized in Galerkin method. The system averaged equations with 1:3 internal resonances are obtained by the method of multiple scales, and the multi-periodic responses behavior of cantilever hard-coating plate under transverse loading could be presented. Finally, the vibration response experiment of hard-coating plate is conducted, and the multi-periodic responses are also present for the hard-coating plate with three-to-one internal resonance. Besides, through the vibration response experiment of uncoated titanium alloy plate, the damping characteristic of hard coating is further analyzed.     

可控约束阻尼层板的杂交控制

用局部压电层控制约束阻尼约束层产生一种新的主、被动杂交控制形式,称为可控制 约束层。本文根据弹性材料、粘弹性材料、压电材料的本构关系和变形连续条件,建立了可控约束阻尼层板的控制微方程;从理论上证明了用离散小压电片组合来代替整体压电层而不影响作动效果,改善了结构的工艺性;利用Ｇａｌｅｒｋｉｎ方法和ＧＨＭ方法建立了系统的近似低阶方程对一试验模型进行了控制数值模拟和试验实现,结果表明这种杂交控制对控制     

Nonlinear vibration isolation of a viscoelastic beam

In this paper, the transmissibility of a viscoelastic beam supported by vertical springs is defined by proposing a new vertical elastic support boundary. By contrasting with the viscoelastic beam with rigid vertical supports and the rigid rod with vertical elastic support ends, the necessity of the transmissibility of an elastic structure with vertical elastic supports is proved. In order to approximately solve the steady-state responses of the nonlinear transverse vibration of the viscoelastic beam under periodic excitation, the harmonic balance method in conjunction with the pseudo arc-length method is adopted. The numerical results are calculated to confirm the approximate analytic results. The comparison between the rigid rod and the elastic beam shows that neglecting the bending vibration of the structures will underestimate the frequency range in which the elastic support produces an effective vibration isolation. On the other hand, the comparison between the rigid support and the spring support demonstrates that ignoring the elasticity of the support ends will create a false understanding of the force transmission of elastic structures. In general, this paper presents the necessity of studying the force transmission of elastic structures with elastic supports. Moreover, this paper will become the beginning of the study of the vibration isolation of the elastic structure.     

A comprehensive analysis of functionally graded sandwich plates: Part 2—Buckling and free vibration

The sinusoidal shear deformation plate theory, presented in the first part of this paper, is used to study the buckling and free vibration of the simply supported functionally graded sandwich plate. Effects of rotatory inertia are considered. The critical buckling load and the vibration natural frequency are investigated. Some available results for sandwich plates non-symmetric about the mid-plane can be retrieved from the present analysis. The influences of the transverse shear deformation, plate aspect ratio, side-to-thickness ratio and volume fraction distributions are studied. In addition, the effect of the core thickness, relative to the total thickness of the plate, on the critical buckling load and the eigenfrequencies is investigated.     

粘接-映射混合算法及其对颗粒材料中板的振动特性分析

结构与颗粒材料相互作用广泛存在于各工程领域,其研究过程中涉及的连续-离散耦合计算方法面对诸多挑战.本文提出了粘接-映射混合算法来研究连续体与离散介质耦合动力学问题.将连续体模型划分为内部区域及与颗粒接触的边界区域.边界区域采用粘接算法模拟连续体外部形状并使用高效的球形接触判断准则;提出一种包含Rayleigh阻尼映射的有限元映射质点弹簧算法来精确计算连续体内部区域内力和变形.二者相结合构成粘接-映射混合算法,并引入计算机集群和GPU(图形处理器)并行技术,对埋没于颗粒材料中受激振动固支方板的连续-离散耦合动力学问题进行了数值仿真研究.结果表明,粘接-映射混合算法有利于双层级并行算法的程序实现及优化,并在连续-离散耦合界面进行快速接触判断的同时实现对颗粒材料中方板位移、变形、振动形态等参数的研究.通过定幅扫频和定频变幅方式考察激振力频率和幅值对振动板非线性动力学行为的影响并观察到二倍周期现象,同时给出了该连续-离散耦合系统中颗粒体系的能量耗散特性.      

A finite element study on the large amplitude flexural vibration characteristics of FGM plates under aerodynamic load

The large amplitude flexural vibration characteristics of functionally graded material (FGM) plates are investigated here using a shear flexible finite element approach. Material properties of the plate are assumed to be graded in the thickness direction according to a simple power-law distribution in terms of volume fractions of the constituents. The effective material properties are then evaluated based on the rule of mixture. The FGM plate is modeled using the first-order shear deformation theory based on exact neutral surface position and von Kármán’s assumptions for large displacement. The third-order piston theory is employed to evaluate the aerodynamic pressure. The governing equations of motion are solved by harmonic balance method to study the vibration amplitude of FGM plates under supersonic air flow. Thereafter, the non-linear equations of motion are solved using Newmark’s time integration technique to understand the flexural vibration behavior of FGM plates in time domain (simple harmonic or periodic or quasi-periodic). This work is new in the sense that it deals with the non-linear flutter characteristics of FGM plates under high supersonic airflow accounting for both the geometric and aerodynamic non-linearities. Some parametric study is conducted to understand the influence of these non-linearities on the flutter characteristics of FGM plates.     

Efficient higher-order shear deformation theories for bending and free vibration analyses of functionally graded plates

In this paper, various efficient higher-order shear deformation theories are presented for bending and free vibration analyses of functionally graded plates. The displacement fields of the present theories are chosen based on cubic, sinusoidal, hyperbolic, and exponential variations in the in-plane displacements through the thickness of the plate. By dividing the transverse displacement into the bending and shear parts and making further assumptions, the number of unknowns and equations of motion of the present theories is reduced and hence makes them simple to use. Equations of motion are derived from Hamilton’s principle. Analytical solutions for deflections, stresses, and frequencies are obtained for simply supported rectangular plates. The accuracy of the present theories is verified by comparing the obtained results with the exact three-dimensional (3D) and quasi-3D solutions and those predicted by higher-order shear deformation theories. Numerical results show that all present theories can archive accuracy comparable to the existing higher-order shear deformation theories that contain more number of unknowns.     

FREQUENCY-SHAPING LQR CONTROL OF WHOLE-SPACECRAFT VIBRATION ISOLATION PLATFORM BASED ON MR DAMPER1)

设计磁流变六杆隔振平台,以改善星箭界面低频振动环境.采用牛顿-欧拉法建立整星隔振平台动力学模型,利用固定界面模态综合法得到卫星和隔振平台动力学模型.由于星箭界面低频振动环境在特定频段存在振动量级较大的问题,采用频域加权LQR (linear quadratic regulator)方法,利用直接分解法扩展系统状态变量,进行磁流变阻尼器半主动控制系统设计.仿真结果表明,相对传统控制方法,频域加权LQR方法在特定频段减振效果明显改善,且在其他频段没有恶化,验证了算法有效性.     

弹性地基加肋功能梯度板自由振动分析的无网格法

基于一阶剪切变形理论和移动最小二乘近似研究Winkler弹性地基上加肋功能梯度板的固有频率。假设功能梯度板的材料性质沿厚度方向按幂函数连续变化,基于物理中面和移动最小二乘近似分别推导功能梯度板和肋条的动能和势能,再通过引入位移协调条件,建立板和肋条节点参数转换关系,叠加两者的总能量,然后利用Hamilton原理推导加肋功能梯度板自由振动控制方程。采用完全转换法施加边界条件。通过将本文的计算结果与有限元以及文献的结果对比,验证方法的收敛性以及准确性。     

Vibration band gap properties of periodic Mindlin plate structure using the spectral element method

In this paper, vibration band gap properties of periodic Mindlin plate structure with two simply supported opposite edges are studied using the spectral element method (SEM). Based on the Mindlin plate theory (MPT), the spectral Mindlin plate stiffness matrix is deduced. The spectral equation of the whole periodic structure is further established. Frequency responses are calculated by the spectral equations to illustrate band gap properties. Compared with the results based on the classic plate theory (CPT), the effects of the shear and rotary inertia on the band gap properties are analyzed. The results are also compared with those calculated by the finite element method (FEM). It can be observed that the SEM is more accurate in high frequency ranges. Furthermore, the influences of the material properties and structure dimension on the band gap behaviors are investigated.     

Vibration and buckling of laminated sandwich plates having interfacial imperfections

The vibration and buckling characteristics of sandwich plates having laminated stiff layers are studied for different degrees of imperfections at the layer interfaces using a refined plate theory. With this plate theory, the through thickness variation of transverse shear stresses is represented by piece-wise parabolic functions where the continuity of these stresses is satisfied at the layer interfaces by taking jumps in the transverse shear strains at the interfaces. The transverse shear stresses free condition at the plate top and bottom surfaces is also satisfied. The inter-laminar imperfections are represented by in-plane displacement jumps at the layer interfaces and characterized by a linear spring layer model. It is quite interesting to note that this plate model having all these refined features requires unknowns only at the reference plane. To have generality in the analysis, finite element technique is adopted and it is carried out with a new triangular element developed for this purpose, as any existing element cannot model this plate model. As there is no published result on imperfect sandwich plates, the problems of perfect sandwich plates and imperfect ordinary laminates are used for validation.