X-ray study on the phase transitions in triammonium hydrogen disulfate crystals and deuterated crystals

The structural phase transitions in triammonium hydrogen disulfate crystals and deuterated crystals below room temperature have been studied by X-ray diffraction. Three phases are observed in the temperature range from 25°C down to — 160°C. The space groups in three different phases are identified as C2/c, P2/n (or Pn), and C2 for (NH₄)₃H(SO₄)₂ and (ND₄)₃D(SO₄)₂ crystals. No isotope effect on the structural phase transitions in these crystals could be detected by these studies. The occurrence of structural phase transitions caused by the reorientation of SO₄ groups and/or the shift of oxygen atoms from the sulfate atom in the SO₄ group are suggested from the diffraction photographs.     

High pressure study of phase transitions inα-FePO4

High pressure behaviour of FePO₄ in berlinite form has been investigated up to 10 GPa using vibrational Raman spectroscopy and energy dispersive x-ray diffraction. Combination of these techniques along with studies on pressure quenched samples reveal structural transitions in this material from its room pressure trigonal phase to a disordered and a crystalline phase near 3±0.5 GPa. The latter is the Cmcm phase which is the equilibrium structure at high pressures. These high pressure phases do not revert back to its initial structure after release of pressure. Irreversibility of these transformations indicates that FeO₄ tetrahedra do not regain their initial coordination. These high pressure transitions can be rationalized in terms of the three level free energy diagram for such systems.     

Influence of shock-wave pressure up to 65 GPa on the crystal structure and superconducting properties of MgB2

The influence of shock-wave pressure treatment up to 65 GPa on the crystal structure and the superconducting transition temperature of a polycrystalline MgB₂ sample has been investigated. X-ray diffraction measurements have revealed that the shock-wave pressure does not result in any irreversible structural phase transitions in the MgB₂, except for microdistortions formed in the crystal structure of the shock-wave pressure-treated MgB₂ sample. This conclusion is in agreement with the results of superconducting transition temperature measurements of a MgB₂ sample performed before and after its shock-wave pressure treatment.     

Successive phase transitions in the highly ordered complex perovskite PbLu1/2Nb1/2O3

The structural phase transitions and the electrical behaviour of the complex perovskite PbLu_1/2Nb_1/2O₃ have been investigated using X-ray powder diffraction, dielectric constant measurements, differential scanning calorimetry and measurement of the polarisation as a function of applied electric field. The high-temperature paraelectric phase is highly ordered. A first-order paraelectric-antiferroelectric phase transition occurs at 270°C and an antiferroelectric-ferroelectric phase transition, characterised by dispersion in the curves of dielectric constant as a function of temperature, occurs at ≈ 30°C. The antiferroelectric phase is isostructural with the orthorhombic form of PbYb1/₂Nb1/₂O₃. The low-temperature ferroelectric phase also has an orthorhombic crystal structure.     

High pressure studies on α-cristobalite form of Al0.5Ga0.5PO4: hydrostatic versus non-hydrostatic conditions

High pressure angle-dispersive X-ray diffraction investigations have been carried out on α-cristobalite form of Al_0.5Ga_0.5PO₄. Our investigations show that the structural stability of this phase under high pressure depends on the nature of pressure conditions in the diamond anvil cell. Under hydrostatic pressure conditions using neon as a pressure transmitting medium, ambient orthorhombic C222₁ phase transforms to orthorhombic Cmcm phase at 4.9?GPa. The high pressure Cmcm phase remains stable up to the highest pressure in the experiment, i.e. 19?GPa. The values of bulk modulus for C222₁ and Cmcm phases are 19(2) and 126(4)?GPa, respectively. In contrast to this, under non-hydrostatic pressure conditions, transformation of ambient C222₁ phase to Cmcm phase has not observed up to 17.4?GPa. Instead, a new monoclinic phase P2₁ is observed which contains layers of six coordinated Al/Ga ions separated by less dense five coordinated Al/Ga ions.     

Phase transition in Pd40Ni10Cu30P20 bulk metallic glass under HP & HT

The phase transitions in Pd₄₀Ni₁₀Cu₃₀P₂₀ bulk metallic glass (BMG) have been studied under high pressure and high temperature (HP & HT) by X-ray diffaction measurements with synchrotron radiation source. We found that the BMG underwent a phase transitions of amorphous-crystalline-amorphous at 10 GPa upon heating. The parallel experiments were carried out at 7 GPa, while we did not observe the amorphous-crystalline-amorphous transitions by increasing temperature. Quenching the melted BMG at 7 GPa, it was found that the phase crystallized from the melt differed from the primary phase crystallized from the starting amorphous solid upon heating suggesting there existed a distinct mechanism in two cases.     

Investigation of the phase transitions of ferroelectric KIO3 and KNbO3 crystals by optical diffraction

Optical diffraction is reviewed as a technique for investigation of the phase transitions in crystals with a multidomain structure. It has been used to study the phase transitions in KIO₃ and KNbO₃ single crystals. Strong optical diffraction bands resulted from electric domains in KNbO₃ crystals and their change with temperature were observed when a laser beam passed through the crystals. The diffraction patterns observed changed abruptly at 427°C, 223°C, and -50°C respectively, at which KNbO₃ crystals undergo structural phase transitions. It is considered that the change of the diffraction patterns with temperature is due to change of the electric domains in the crystals.     

Exafs study of structural phase transitions in RbVF4

Successive structural transitions of RbVF₄ have been studied with extended X-ray absorption fine structure (EXAFS) of Rb ions. It is found that there are some modulations in the pre-edge and post-edge regions of the X-ray absorption spectrum in the vicinity of the structural phase transitions above room temperature. By analyzing the EXAFS, it is also found that local spatial distortions around the Rb ions are induced at the structural transitions.     

Synthesis and luminescent properties of Y6W2O15:Eu phosphors

In this paper, a novel phosphor, Y₆W₂O₁₅:Eu³⁺ was synthesized by thermal decomposition and phase transition of its decatungstate gel precursor. With stepwise increase of temperature to 750 °C, a crystalline phase of Y₆W₂O₁₅:Eu³⁺forms that gives intense red emission when excited at 466 nm, the emission is attributed to the Eu³⁺ ions transitions from ⁵D₀ excited states to ⁷F_J (J=0-4) ground states. The long excitation wavelength proves the Eu³⁺ transition follows the photoexcitation of the oxygen-metal (O→W lmct) charge transfer bands in yttrium tungstate. Some structural information regarding Y₆W₂O₁₅ provided by luminescence is in accord with that characterized by X-ray diffraction (XRD) and scanning electron microscope (SEM). The long-wavelength excitation properties of this material may find application in the production of red phosphors for white light-emitting diodes (LEDs).     

Incommensurate cooperative tilting modes of MnF6 octahedra relatedto the structural phasetransitions in BaMnF4

The structural phase transitions of the layer compound BaMnF₄ were studied by high-resolution X-ray diffraction using synchrotron radiation. The intensities and profiles of two kinds of superlattice reflections having incommensurate reduced wave vectors q ₁= (～ ± 1/5,0,0) _p and q ₂ =(～ ± 2/5,1/2,1/2)_p, respectively, were measured as a function of temperature from 25 K to 280 K. These temperature dependencies show that incommensurate structural phase transitions of second order occur at 234 K and 244 K. These structural phase transitions are interpreted as successive condensations of a folding-screen-like incommensurate plane-distortion mode and a commensurate anti-ferro-distortive tilting mode of the MnF₆ octahedra around the primitive a₀ - and b₀ -axes, when cooled down. It is also found that there is another structural phase transition at about 45 K related to a precursor structural distortion for the antiferromagnetic transition occurring at about 26 K.     

Anomalous pressure-induced phase transformation in nano-crystalline erbium sesquioxide (Er2O3): partial amorphization under compression

Nanophase materials have novel physical and chemical properties, differing from bulk materials. It is of exceptional interest to investigate the size effect on structural stability in nanocrystals. Here, we investigated pressure-induced phase transitions in nanosized Er₂O₃ using angle-dispersive synchrotron X-ray diffraction up to 40.6 GPa. Nano-Er₂O₃ has enhanced transition pressure and higher bulk modulus (K₀) than its bulk counterparts. Amorphous Er₂O₃ nanoclusters with traces of monoclinic phase are obtained upon compression. This is the first time that partial amorphous structure under compression was observed in nano-Er₂O₃, indicating a kinetic trapping of partial amorphous Er₂O₃ on pressurizing.     

Search for a precursor crystal-to-crystal phase transition to amorphization in α-GeO2 and α-AlPO4 under pressure

Recent X-ray diffraction studies on α-quartz (SiO₂) by Kingmaet al [1], have shown the occurrence of a reversible, crystalline-to-crystalline, phase transition just prior to amorphization at ≈ 21 GPa. This precursor transition has also been confirmed by our recent molecular dynamics simulation study [2]. In order to investigate the possibility of a similar behaviour in other isostructural compounds, which also undergo pressure induced amorphization, α-GeO₂ and α-AlPO₄ (berlinite form) were studied using energy dispersive X-ray diffraction. In either of these materials, no such phase transition is detected prior to amorphization. The onset of amorphization and its reversal is found to be time dependent in GeO₂.     

The formation and stability of quasicrystal in Al80Mn14Si6 under high static pressure

Abstract

The method of quenching in fusing state under high static pressure (MQFSHP) was applied for the first time to prepare the quasicrystal icosahedral phase of Al₈₀Mn₁₄Si₆ alloy. The pressure was from 2.8GPa to 3.1GPa and the cooling rate during quenching was of about 100°C/s. Some sharp electron diffraction spots showing an arrangement with a five-fold symmetry axis and noncrystalline ring have been observed in electron diffraction experiment.

The crystallization temperature of I phase obtained from high pressure(HP) is close to that of rapid cooling ribbon, but the cooling rate of the sample obtained is lower than that of rapid cooling ribbon.     

High pressure phase transitions and depressurization amorphization of Bi2Fe4O9

High pressure structural behavior of Bi₂Fe₄O₉ has been studied by in situ angular-dispersive X-ray diffraction (ADXD) measurements up to 51.3 GPa. Two phase transitions have been observed at 7.6 and 22.6 GPa, respectively. A second high pressure structure (HP2) involving the tripling of lattice parameter c has been identified. An unusual amorphization occurs after releasing pressure. The high pressure phase transitions can be understood in terms of the increase in the coordination number of Fe³⁺ ion. The depressurization amorphization results from the appearance of the metastable HP2 and its collapse after releasing pressure. The results extend our understanding of pressure-induced amorphization.     

铁磁形状记忆合金Mn2NiGa中应力诱发马氏体相的结构和磁性

采用金刚石对顶砧高压装置（DAC）和同步辐射X射线光源法,对Heusler类型的磁性形状记忆合金Mn₂NiGa的结构进行了原位高压X射线衍射测量,并对卸载后的受压样品进行了磁测量.实验观察到材料在室温下分别在0.77 GPa和20 GPa压力下发生了两次不可逆结构相变：马氏体相变和两种不同马氏体间的等结构相变.同时加压使马氏体结构中产生了大量的缺陷,造成了严重的晶格畸变,致使马氏体结构的矫顽力提高了近10倍,达到204 kA/m.结果发现,加压处理造成样品马氏体相饱和磁化强度的大幅度 关键词： 铁磁形状记忆合金 2NiGa')" href="#">Mn₂NiGa 高压 同步辐射     

Crystal structure of NaNO3 at high pressure

Abstract

Effect of high pressure on the crystal structure of rhombohedral NaNO₃ was investigated by X-ray diffraction of single crystals mounted in a miniature diamond-anvil cell on synchrotron radiation source. Diffraction intensity measurements were made at three pressures across a suggested transition pressure 4.3 GPa. No change was observed in an overall distribution of reflections in the reciprocal space with increasing pressure, but there was a systematic variation in diffraction intensity for particular groups of reflections. An analysis based on the structure factor calculation showed that a structure change induced by pressure is mainly a rotation of the nitrate groups in the alternate layers along the threefold axis in opposite directions. Least-squares refinement of the atomic positional parameters yielded the angle of the rotation to be 4.3 and 7.0 deg at pressures of 4.4 and 5.0 GPa, respectively. It has also been shown that the positions of the sodium and nitrogen atoms are slightly displaced along the axis, resulting in the formation of dipoles in the high pressure phase.     

Structural phase transitions in niobium oxide nanocrystals

Niobium oxide nanocrystals were successfully synthesized employing the green synthesis method. Phase formation, microstructure and compositional properties of 1, 4 and 7 days incubation treated samples after calcinations at 450 °C were examined using X-ray diffraction, Raman, photoluminescence (PL), infrared, X-ray photoelectron spectra and transmission electron microscopic characterizations. It was observed that phase formation of Nb₂O₅ nanocrystals was dependent upon the incubation period required to form stable metal oxides. The characteristic results clearly revealed that with increasing incubation and aging, the transformation of cubic, orthorhombic and monoclinic phases were observed. The uniform heating at room temperature (32 °C) and the ligation of niobium atoms due to higher phenolic constituents of utilized rambutan during aging processing plays a vital role in structural phase transitions in niobium oxide nanocrystals. The defects over a period of incubation and the intensities of the PL spectra changing over a period of aging were related to the amount of the defects induced by the phase transition.     

Phase transition in Pd<Subscript>40</Subscript>Ni<Subscript>10</Subscript>Cu<Subscript>30</Subscript>P<Subscript>20</Subscript> bulk metallic glass under HP &; HT

The phase transitions in Pd₄₀Ni₁₀Cu₃₀P₂₀ bulk metallic glass (BMG) have been studied under high pressure and high temperature (HP & HT) by X-ray diffaction measurements with synchrotron radiation source. We found that the BMG underwent a phase transitions of amorphous-crystalline-amorphous at 10 GPa upon heating. The parallel experiments were carried out at 7 GPa, while we did not observe the amorphous-crystalline-amorphous transitions by increasing temperature. Quenching the melted BMG at 7 GPa, it was found that the phase crystallized from the melt differed from the primary phase crystallized from the starting amorphous solid upon heating suggesting there existed a distinct mechanism in two cases.     

Effect of substitution of Ce on superconducting properties of Bi1.7Pb0.3Sr2Ca2−x Ce x Cu3O10+δ system

We have investigated the superconducting properties of the Bi_1.7 Pb_0.3Sr₂Ca_2−xCe _x Cu₃O_10+δ system with x=0.00, 0.02, 0.04, 0.08 and 0.1 by X-ray diffraction and magnetic susceptibility. The substitution of Ce for Ca has been found to drastically change the superconducting properties of the system. X-ray diffraction studies on these compounds indicate decrease in the c-parameter with increased substitution of Ce at Ca site and volume fraction of high T _c (2 : 2 : 2 : 3) phase decreases and low T _c phase increases. The magnetic susceptibility of this compound shows that the diamagnetic on set superconducting transition temperature (onset) varies from 109 K to 51 K for x=0.00, 0.02, 0.04, 0.08 and 0.1. These results suggest the possible existence of Ce in a tetravalent state rather than a trivalent state in this system; that is, Ca²⁺ → Ce⁴⁺ replacement changes the hole carrier concentration. Hole filling is the cause of lowering T _c of the system.     

Synthesis of single-crystal perovskite PbCrO3 through a new reaction route at high pressure

As a new member in the family of Mott system, perovskite PbCrO₃ has recently been uncovered to exhibit fantastic structural transition under pressure, coupled with magnetic, electronic, and ferromagnetic transitions, which provide many opportunities for understanding of correlated system. However, it is still challenging to synthesize high-quality single-crystal PbCrO₃, leading to the limited exploration of this Mott compound. In this work, we formulate a new high-pressure reaction route for preparation of high-quality PbCrO₃ crystals between PbCl₂ and Na₂CrO₄ at high pressure of 5–10?GPa and at high temperature of 750–1500°C. Because of the formation of reaction byproduct NaCl, the final product can readily be separated by washing with water. The obtained sample is in the form of single crystal with crystallite size up to 200?μm. In addition, combined with X-ray diffraction measurement, a tentative pressure-temperature synthesis diagram of PbCrO₃ is mapped out from the reaction between PbCl₂ and Na₂CrO₄ and the reaction mechanism is also explored in detail.