Effect of fullerenes on the activation energy of the graphite-diamond phase transition

The modification of graphite used in diamond synthesis with low concentrations of the fullerene C₆₀-C₇₀ extract (from 0.045 to 0.225 wt % of graphite mass) in the presence of a Ni-Mn metal catalyst at a pressure of 5 GPa in the temperature range 1600–1800 K is found to decrease the activation energy of the graphite-diamond phase transition from 160 ± 40 to 100 ± 40 kJ/mol.     

Crystal structure and compressibility of FePt nanoparticles under high pressures and high temperatures

FePt nanoparticles with an average grain size of 4 nm and equiatomic composition of Fe and Pt was studied under high pressures in a diamond anvil cell to investigate its structural stability and compressibility under high compression. The ambient pressure disordered face-centered-cubic (fcc) phase was found to be stable to the highest pressure of 61 GPa (compression of 15%) at room temperature. The compression of Fe₅₀Pt₅₀ nanoparticles is closer to the compression curve for pure Pt and shows lower compressibility than what would be expected for a bulk Fe₅₀Pt₅₀ alloy. The nanoparticle character of Fe₅₀Pt₅₀ sample is maintained to the highest pressure without any observable grain coarsening effects at ambient temperature. Laser heating of disordered fcc phase at 32 GPa to a temperature of 2000 K resulted in a phase transformation to a microcrystalline phase with the distorted fcc structure.     

Electroconductivity and pressure–temperature states of step shocked C60 fullerite

A study of electrophysical and thermodynamic properties of C₆₀ single crystals under step shock loading has been carried out. The increase and the following reduction in specific electroconductivity of C₆₀ fullerite single crystals at step shock compression up to pressure 30 GPa have been measured. The equations of state for face centred cubic (fcc) C₆₀ fullerite as well as for two-dimensional polymer C₆₀ and for three-dimensional polymer C₆₀ (3D-C₆₀) were constructed. The pressure–temperature states of C₆₀ fullerite were calculated at step shock compression up to pressure 30 GPa and temperature 550 K. The X-ray diffraction studies of shock-recovered samples reveal a mixture of fcc C₆₀ and a X-ray amorphous component of fullerite C₆₀. The start of the formation of the X-ray amorphous component occurs at a pressure P _m≈ 19.8 GPa and a temperature T _m≈ 520 K. At pressures exceeding P _m and temperatures exceeding T _m, the shock compressed fullerite consist of a two-phase mixture of fcc C₆₀ fullerite and an X-ray amorphous component presumably consisting of the nucleators of polymer 3D-C₆₀ fullerite. The decrease in electroconductivity of fullerite can be explained by the percolation effect caused by the change of pressure, size and number of polymeric phase nuclei.     

纤锌矿氮化硼及其应用的研究（Ⅱ）——纤锌矿型氮化硼的等温状态方程

 使用两种不同的高压在位X光衍射法，研究了用爆炸法合成的纤锌矿型氮化硼（wBN）在室温下的等温状态方程。一种方法是用转靶X光角色散粉末衍射法，研究了它在0~40 GPa压力范围内的等温压缩行为。结果表明，wBN在0~40 GPa的压力范围内是稳定的，没有发生结构相变。通过p-V数据对Murnaghan方程拟合，得到wBN在p=0时的等温体模量B₀=(335±34) GPa及其对压力的一阶导数B₀'=4.21；另一种是用同步辐射X光能量色散衍射法，研究了它在0~25 GPa压力范围内的等温状态方程。实验中，使用了改进的自动加压的DAC高压装置，此装置保证了实验中衍射角θ₀固定不变。将获得的p-V数据仍用Murnaghan方程拟合，得到wBN在p=0时等温体模量B₀=(280±56) GPa，及其B₀'=4.39。     

Pressure-induced transformations and optical properties of the two-dimensional tetragonal polymer of C60 at pressures up to 30 GPa

The Raman spectra of the two-dimensional tetragonal (2D(T)) polymeric phase of C₆₀ have been studied in situ at pressures up to 30 GPa and room temperature. The pressure dependence of the phonon modes shows an irreversible transformation of the material near 20 GPa into a new phase, most probably associated with the covalent bonding between the 2D polymeric sheets. The Raman spectrum of the high-pressure phase is intense and well resolved, and the majority of modes are related to the fullerene molecular cage. The sample recovered at ambient conditions is in a metastable phase and transforms violently under laser irradiation: the transformed material contains mainly dimers and monomers of C₆₀ and small inclusions of the diamond-like carbon phase. The photoluminescence spectra of the 2D(T) polymer of C₆₀ were measured at room temperature and pressure up to 4 GPa. The intensity distribution and the pressure-induced shift of the photoluminescence spectrum drastically differ from those of the C₆₀ monomer. The deformation potential and the Grüneisen parameters of the 2D(T) polymeric phase of C₆₀ have been determined and compared with those of the pristine material.     

α-LiIO3的等温压缩和高温高压下的相变

用金刚石压砧高压X射线衍射技术研究了α-LilO₃在室温高压下的压缩行为,压力达23.0GP_a。观察到晶格压缩的各向异性,其c/a轴比以-6.187×10^-3/GP_a的速率减小。得到其常压下的体弹模量B₀=39.2GP_a,体弹模量对压力的一阶导数B＇₀=3.787。α-LiIO₃在高温高压下转变成四方结构,与淬火卸压所得的ε-LiIO₃结构一致。 关键词：     

Photoluminescence and Raman spectroscopy studies of Eu3+-doped rutile TiO2 nanocrystals at high pressures

Nanocrystal samples (particle size about 90 nm) of Eu³⁺-doped rutile titanium dioxide (TiO₂) nanocrystals (rutile Eu³⁺/TiO₂ nanocrystals) were synthesized by the sol–gel method with hydrothermal treatment. The pressure effect on photoluminescence (PL) and Raman spectra of the rutile Eu³⁺/TiO₂ nanocrystals was investigated with a diamond anvil cell under hydrostatic pressure condition. Raman spectra of the samples at high pressures indicated that the critical pressure for the transition from the rutile phase to a new baddeleyite-type phase was between 10 and 14.2 GPa. The position of Raman bands shifted to high wavenumbers and the PL intensity of ⁵D ₀→⁷F ₂ transition of Eu³⁺ decreased down to zero with the increase of pressure before the phase transition occurred. After releasing the pressure, the rutile phase was not recovered and a α-PbO₂-type phase was observed at ambient pressure.     

The baddeleyite-type high pressure phase of Ca(OH)2

Abstract

A phase transition from Ca(OH)₂ I (portlandite) to Ca(OH)₂ II at high pressure and temperature has been confirmed, using in situ x-ray diffraction in a multianvil high pressure device (DIA). The structure was determined at 9.5 GPa and room temperature from data collected after heating the sample at 300°C at 7.2 GPa in a diamond anvil cell. Both the Le Bail fit and preliminary Rietveld refinement suggest that the new phase, which reverts to Ca(OH), I during pressure release, has a structure related to that of baddeleyite (ZrO₁); it is monoclinic (P2₁/c) with a= 4.887(2), b= 5.834(2), c = 5.587(2), β = 99.74(2)°. The coordination number of Ca increases from six to seven (5 + 2) across the transition. At 500°C, the phase boundary is bracketed at 5.7 ± 0.4 GPa by reversal experiments performed in the DIA.     

Pressure induced phase transformations and band structure of different high pressure phases in tellurium

We report here high-pressure x-ray diffraction (XRD) studies on tellurium (Te) at room temperature up to 40 GPa in the diamond anvil cell (DAC). The XRD measurements clearly indicate a sequence of pressure-induced phase transitions with increasing pressure. The data obtained in the pressure range 1 bar to 40 GPa fit five different crystalline phases out of Te: hexagonal Te (I) → monoclinic Te(II) → orthorhombic Te (III) → Β-Po-type Te(IV) → body-centered-cubic Te(V) at 4, 6.2, 11 and 27 GPa, respectively. The volume changes across these transitions are 10%, 1.5%, 0.3% and 0.5%, respectively. Self consistent electronic band structure calculations both for ambient and high pressure phases have been carried out using the tight binding linear muffin tin orbital (TB-LMTO) method within the atomic-sphere approximation (ASA). Reported here apart from the energy band calculations are the density of states (DOS), Fermi energy (E _f) at various high-pressure phases. Our calculations show that the ambient pressure hexagonal phase has a band gap of 0.42 eV whereas high-pressure phases are found to be metallic. We also found that the pressure induced semiconducting to metallic transition occurs at about 4 GPa which corresponds to the hexagonal phase to monoclinic phase transition. Equation of state and bulk modulus of different high-pressure phases have also been discussed.     

In situ Raman and photoluminescence study on pressure‐induced phase transition in C60 nanotubes

Single crystalline C₆₀ nanotubes having face‐centered‐cubic structure with diameters in the nanometer range were synthesized by a solution method. In situ Raman and photoluminescence spectroscopy under high pressure were employed to study the structural stabilities and transitions of the pristine C₆₀ nanotubes. A phase transition, probably because of the orientational ordering of C₆₀ molecules, from face‐centered‐cubic structure to simple cubic structure occurred at the pressure between 1.46 and 2.26 GPa. At above 20.41 GPa, the Raman spectrum became very diffuse and lost its fine structure in all wavenumber regions, and only two broad and asymmetry peaks initially centered at 1469 and 1570 cm^–1 were observed, indicating an occurrence of amorphization. This amorphous phase remained to be reversible until 31.1 GPa, and it became irreversible to the ambient pressure after the pressure cycle of 34.3 GPa was applied. Copyright © 2012 John Wiley & Sons, Ltd.     

Experimental measurement of the electrical conductivity of pyroxenite at high temperature and high pressure under different oxygen fugacities

Electrical conductivities of pyroxenite were measured between frequencies of 10^?1 and 10⁶ Hz in a multi-anvil pressure apparatus using different solid buffers (Ni+NiO, Fe+Fe₃O₄, Fe+FeO and Mo+MoO₂) to stabilize the partial pressure of oxygen. The temperature ranged from 1073 to 1423 K (800 to 1200 °C) and the pressure from 1.0 to 4.0 GPa. We observe that: (1) the electrical conductivity (σ) of pyroxenite depends on frequency; (2) σ tends to increase with rising temperature (T), and Log σ and 1/T obey a linear Arrhenius relationship; (3) under control of the buffer Fe+Fe₃O₄, σ tends to decrease with rising pressure, nevertheless the activation enthalpy tends to increase. For the first time we have obtained values for the activation energy and activation bulk volume of the main charge carriers, which are (1.60±0.07) eV and (0.05±0.03) cm³/mol, respectively; (4) for a given pressure and temperature, σ tends to rise with increased oxygen fugacity, whereas the activation enthalpy and preexponential factor tend to decrease; and (5) the behaviour of the electrical conductivity at high temperature and high pressure can be reasonably interpreted by assuming that small polarons provide the dominant conduction mechanism in the pyroxenite samples.     

Ultraviolet Raman analysis of the formation of diamond from C60

The ultraviolet (257 nm) Raman spectrum of C₆₀ compressed to 30 GPa in a Mao–Bell diamond anvil cell with no pressure transmitting medium at ambient temperature indicates the formation of diamond after release of pressure. Previously, more extreme non-hydrostatic compression was reported to be required to form diamond from C₆₀. These results provide confirmation of the transformation of C₆₀ to diamond upon non-hydrostatic compression at room temperature and illustrate the utility of UV Raman spectroscopy for the analysis of carbon phases containing both sp² and sp³ bonding.     

Equation of state and structural phase transition in FeBO3 at high pressure

The evolution of X-ray diffraction patterns in FeBO₃ under high pressures up to 63 GPa has been investigated at room temperature in a diamond anvil cell. A structural phase transition at a pressure of 53±2 GPa was found for the first time. The transition is of the first-order type with a hysteresisless drop of the reduced unit cell volume of about 8.6%. Apparently, the transition is isostructural. At pressures below the transition, the equation of state for FeBO₃ was fitted. In the third-order approximation of the Birch-Murnagan equation of state, the bulk modulus K and its first pressure derivative K′ were found to be 255±25 GPa and 5.0±1.2, respectively.     

Infrared Spectra of Benzene at High Pressures

Mid-infrared spectra in the ranges 400-1800 and 2700-4000 cm^-1 are reported for benzene samples in diamond anvil cells at ambient temperature and pressures up to 10 GPa. The freezing pressure is confirmed to be 0.1±0.05 GPa. Changes in the spectra and in the sample appearance indicate that sluggish solid state phase transitions occur near 2.0 and 4.0 GPa. The wave number shifts with pressure for 27 selected peaks are plotted. Their small increases show that only minor distortions of the molecules occur, and there is no evidence of any weakening of intramolecular bonds in this pressure range.     

六角相B-C-N化合物的高压相变研究

采用原位高压同步辐射能散X射线衍射和金刚石压砧技术,实验研究了新型超硬材料六角相B0.47C0.23N0.30的高压相变及物理特性,压力范围为1.4～30 GPa.实验结果表明,六角相B..47C0.23N0.30在14.9 GPa压力下发生了相变,形成的新相为六方纤锌矿结构.计算得到了具有六方纤锌矿结构的B0.47C...     

High pressure behavior of nano-crystalline CeO2 up to 35 GPa: a Raman investigation

The present paper reports the results of in situ Raman studies carried out on nano-crystalline CeO₂ up to a pressure of 35 GPa at room temperature. The material was characterized at ambient conditions using X-ray diffraction and Raman spectroscopy and was found to have a cubic structure. We observed the Raman peak at ambient at 465 cm^?1, which is characteristic of the cubic structure of the material. The sample was pressurized using a diamond anvil cell using ruby fluorescence as the pressure monitor, and the phase evolution was tracked by Raman spectroscopy. With an increase in the applied pressure, the cubic band was seen to steadily shift to higher wavenumbers. However, we observed the appearance of a number of new peaks around a pressure of about 34.7 GPa. CeO₂ was found to undergo a phase transition to an orthorhombic α -PbCl₂-type structure at this pressure. With the release of the applied pressure, the observed peaks steadily shift to lower wavenumbers. On decompression, the high pressure phase existed down to a total release of pressure.     

Single-crystal elasticity of the rhodochrosite at high pressure by Brillouin scattering spectroscopy

ABSTRACT

The sound velocity properties of single-crystal rhodochrosite (MnCO₃) were determined up to 9.7?GPa at ambient temperature by Brillouin scattering spectroscopy. Six elastic constants were calculated by a genetic algorithm method using the Christoffel's equations at each pressure. The elastic constants increased linearly as a function of pressure and its pressure derivatives ?Cij/?P for C₁₁, C₃₃, C₄₄, C₁₂, C₁₃, C₁₄ were 5.86 (±0.36), 3.82 (±0.44), 2.06 (±0.39), 5.07 (±0.27), 5.34 (±0.44), 1.52 (±0.24), respectively. Based on the derived elastic constants of rhodochrosite, the aggregate adiabatic bulk and shear moduli (K_s and G) were calculated using the Voigt-Reuss-Hill averages and the linear fitting coefficients (?K_s/?P)_T and (?G/?P)_T were 5.05(±0.26) and 0.73(±0.05), respectively. The aggregate V_p of rhodochrosite increased clearly as a function of pressure and its pressure derivative ?V_p/?P was 7.99(±0.53)?×?10^?2?km/(s?GPa), while the aggregate V_s increased slowly and ?V_s/?P was only 1.19(±0.12)?×?10^?2?km/(s?GPa). The anisotropy factor for As of rhodochrosite increased from ～40% at 0.8?GPa to ～48% at 9.7?GPa, while A_p decreased from ～19% to ～16% at the corresponding pressure.     

High pressure X-ray diffraction and Raman spectroscopic studies of the phase change of D2O ice VII at approximately 11 GPa

High pressure experiments were performed on D₂O ice VII using a diamond anvil cell in a pressure range of 2.0–60 GPa at room temperature. In situ X-ray diffractometry revealed that the structure changed from cubic to a low symmetry phase at approximately 11 GPa, based on the observed splitting of the cubic structure's diffraction lines. Heating treatments were added for the samples to reduce the effect of non-hydrostatic stress. After heating, splitting diffraction lines became sharp and the splitting was clearly retained. Although symmetry and structure of the transformed phase have not been determined, change in volumes vs. pressure was calculated, assuming that the low-symmetry phase had a tetragonal structure. The bulk modulus calculated for the low-symmetry phase was slightly larger than that for the cubic structure. In Raman spectroscopy, the squared vibrational frequencies of ν₁ (A_1g), as a function of pressure, showed a clear change in the slope at 11–13 GPa. The full width at half maxima of the O-D modes decreased with increasing pressure, reaching a minimum at approximately 11 GPa, and increased again above 11 GPa. These results evidently support the existence of phase change at approximately 11 GPa for D₂O ice VII.     

The hydrogen‐bond effect on the high pressure behavior of hydrazinium monochloride

The first high pressure study of solid hydrazinium monochloride has been performed by in situ Raman spectroscopy and synchrotron X‐ray diffraction (XRD) experiments in diamond anvil cell (DAC) up to 39.5 and 24.6 GPa, respectively. The structure of phase I at room temperature is confirmed to be space group C2/c by the Raman spectral analysis and Rietveld refinement of the XRD pattern. A structural transition from phase I to II is observed at 7.3 GPa. Pressure‐induced position variation of hydrogen atoms in NH₃⁺ unit during the phase transition is attributed to the formation of N―H…Cl hydrogen‐bonds, which play a vital role in the stability and subsequent structural changes of this high energetic material under pressure. This inference is proved from the abnormal pressure shifts and obvious Fermi resonance in NH stretching mode of N₂H₅⁺ ion in the Raman experiment. Finally, a further transition from phase II to III accompanied with a slight internal distortion in the N₂H₅⁺ ions occurs above 19.8 GPa, and phase III persists up to 39.5 GPa. Copyright © 2015 John Wiley & Sons, Ltd.