Synthesis of Furano[3,2-c]- and Pyrano[3,2-c]quinolines upon Imino Diels-Alder Reactions Initiated by Nitrosonium （NO^＋）

Efficient nitrosonium （NO＋）-initiated aza-Diels-Alder reactions of N-arylimines with 2,3-dihydrofuran or 3,4-dihydro-2H-pyran allowed access to furano[3,2-c]- or pyrano[3,2-c]quinolines. A mixture of cis and trans-quinoline isomers was obtained in various ratios and yields.     

H_6P_2W_（18）O_（62）á18H_2O： A green and reusable catalyst for one-pot synthesis of pyrano[4,3-b]pyrans in water

A convenient,effcient and environmentally benign procedure has been developed for the synthesis of pyrano[4,3-b]pyran derivatives via a one-pot,three-component reaction of 4-hydroxy-6-methylpyran-2-one,aldehydes and malononitrile in water using H6P2W18O62á18H2O as catalyst.Reusability of the catalyst and reaction media,short reaction times and easy isolation of products are some added advantages of the present methodology.     

Synthesis of Quinoxalinophenazine Derivatives and Reaction of 3,12-Dimethylbenzo[a]quinoxalino-[2,3-c]phenazine with Mercury(Ⅱ) Bromide: Spectral and Structural Characterization

A new series of quinoxalinophenazine derivatives were synthesized in good yields by the reaction of 2,3-dibromonaphthalene-1,4-dione with different aryl-1,2-diamines in DMF as solvent at 120~130℃ or under reflux conditions. 3,12-dimethylbenzo[a]quinoxalino[2,3-c] phenazine with bidentate character reacts with mercury(II) bromide to give suitable crystals. All products were confirmed by IR, 1H and 13 C NMR, and the metal complex by single-crystal X-ray method. The crystal(C24H16Br2HgN4, Mr = 720.82) belongs to the triclinic system, space group P1 with a = 10.186(6), b = 10.421(6), c = 11.470(7) , α = 98.670(7), β = 95.069(7), γ = 109.831(7)o, V = 1119.4(12) 3, Z = 2, Dc = 2.139 Mg/m3, μ = 10.46 mm-1, F(000) = 676, R = 0.043 and wR = 0.115 for 3982 observed reflections with I 2σ(I).     

Synthesis of novel benzo[b]pyrimido[4',5':5,4]thieno[2,3-e][1,6]naphthyridine-8-ones via Pictet–Spengler cyclization

An efficient method for the synthesis of novel benzo[b]pyrimido[4',5':5,4]thieno[2,3e]-[1,6]naphthyridine-8-one derivatives via Pictet–Spengler cyclization is reported. The reaction of 4-(3-aminopyrimido[4,5-d]thieno-2-yl)quinoline-2-ones, which could be obtained from Thorpe–Ziegler isomerization of 4-bromomethylquinoline-2-ones and 5-cyano-1,6-dihydro-4-methyl-2-phenyl-6-thioxopyrimidine,with aromatic aldehydes in the presence of BF_3·OEt_2 gives pyrimidothieno[1,6]naphthyridines in good yields.     

Organic solar cells based on chlorine functionalized benzo[1,2-b:4,5-b′]difuran-benzo[1,2-c:4,5-c′]dithiophene-4,8-dione copolymer with efficiency exceeding 13%

Benzo[1,2-b:4,5-b′]dithiophene(BDT) has been widely used to construct donor-acceptor(D-A) copolymers in organic solar cells(OSCs). However, benzo[1,2-b:4,5-b′]difuran(BDF), an analogue of BDT, has received less attention than BDT. The photovoltaic performance of BDF copolymers has lagged behind that of BDT copolymers. Here, we designed and synthesized two BDF copolymers, PBF1-C and PBF1-C-2Cl. PBF1-C-2Cl, which is composed of BDF and benzo[1,2-c:4,5-c′]dithiophene-4,8-dione connected by a chlorinated thiophene π-bridge, displays a low-lying highest occupied molecular orbital energy level,which helps in yielding a high open-circuit voltage(V_(oc)) in OSCs. As a result, when blended with Y6, PBF1-C-2Cl-based devices showed a high V_(oc) of 0.83 V and a power conversion efficiency(PCE) of 13.10%. To the best of our knowledge, the PCE of 13.10% is among the highest efficiency values for OSCs based on BDF copolymers.     

Tandem Approach to Functionalized Pyrrolo[3,4-α]carbazole-1,3-diones via a Pd-catalyzed Indole-to-carbazole Transformation

A one-pot and efficient tliree-component reaction of indoles, acrylates and maleimides for the synthesis of pyrrolo[3,4-α]carbazole-1,3-dione derivatives was developed. Three C-C bonds and one ring were created in a single step via an indole-to-carbazole transformation triggered by Pd(II)-catalyzed direct C3-alkenylation of indoles.     

New Synthetic Method of Azuleno[1,2-c]thiophenes

On the viewpoints of physical and chemical properties and biological activities, syntheses of a variety of heterocycle-fused azulenes have been repoted.[1] Of them, thiophene-fused azulenes were prepared by using different types of stating materials as follows. Azuleno[2,1-b] thiophenes are readily obtained from the reactions of 2-chloroazulene derivatives with ethyl mercaptoacetate in a few steps in good yield by Matsui[2] and Yamane.[3] On the other hand, the first synthesis of azuleno[1,2-c]thiophenes was accomplished by the reaction of 3-methoxycarbonyl-2H-cyclohepta[b]furan2-one with morpholino enamine of 3-oxotetrahydro-thiophene followed by dehydrogenation in poor yield by Fujimori.     

New Approach to Synthesis of Tetrahydroisoquino[2,1-c] [1,3]benzodiazepine

A concise and efficient synthesis of the new compounds tetrahydroisoquino [2,1-c] [1,3]benzodiazepine 5 and 7 is reported.     

Amberlyst-15? in PEG: A novel catalytic system for the facile and efficient one-pot synthesis of benzothiazolo-[2,3-b]-quinazolinone derivatives

A simple and convenient approach for the synthesis of tetraheterocyclic benzothiazolo-[2,3-b]-quinazolin-1-ones has been developed utilizing the MCR methodology, which involves the condensation of 2-aminobenzothiazole, cyclic-diketones and various aldehydes using Amberlyst-15 in PEG 400 as an environmentally benign and reusable catalyst system. Environmental benignity, recyclability, cost-effectiveness, easy workup and excellent yields are the major attributes of this one-pot procedure.     

Rhodium-catalyzed oxidative homologation of N-pyrimidyl indolines with alkynes via dual C—H activation: Facile synthesis of benzo[g] indolines

An efficient route to benzo[g]indolines by a rhodium-catalyzed C6- and C7 H functionalization of indolines with alkynes was achieved, which is potentially applicable to the synthesis of benzo[g] indoles through oxidation/removal of the directing group.     

Crystal Structure and Herbicidal Activity of 5,7-Dimethoxy-(2,4-dichlorophenoxyacetyl- imino)-2H-1,2,4-thiadiazolo[2,3-a]pyrimidine

1 INTRODUCTION 2H-1,2,4-Thiadiazolo[2,3-a]pyrimidine compounds are a new series of ALS inhibiting agents besides sulfonylurea herbicide. Their herbicidal activity is similar to that of sulfonylurea herbicide, but be- cause of weak S–N bond existing in 2H-1,2,4-thiadi- azolo[2,3-a]pyrimidine ring, which is advantageous for the absorption and metabolism of vegetable, 2H- 1,2,4-thiadiazolo[2,3-a]pyrimidine herbicides have better selectivity[1～3]. At present, reports about the synthesis…     

Study on the Ring Eulargment Reaction: Synthesis of 7,8,13, 13a-tetrahydroisoindolo[1,2-b][3]benzazepine and 5,6,8,9,14,14a-hexahydroisoquino[1,2-b][3]benzazepine

In our research on the ring enlargement of certain N-heterocycles, a general procedure for the ring enlargement with the insertion of an extra -CH2- was improved and shown in Scheme I1.Scheme IThe procedure had been carried out with such N-heterocycles as 2-methyl-1,2,3,4-tetrahydroisoquinoline2, tetrahydroberberine and strychnine3 with expected results. Thus, the procedure shown in Scheme I provides a new approach to the synthesis of larger N-heterocycles.Isoindolo[1,2-b][3]benzazepines a…     

Synthesis of furo[3,2-c]- and pyrano[3,2-c]quinolines by lanthanide triflate catalyzed imino-Diels-Alder reaction

Imino Diels-Alder reaction of imines with 2,3-dihydrofuran or 3,4-dihydro-2H-pyran proceeded smoothly in the presence of a catalytic amount (0.5 mol %) of ytterbium triflate to afford furo[3,2-c]- and pyrano[3,2-c] quinolines conveniently in high yield.     

A Facile Method for the Synthesis of 4- Acetylaminobenzo[15]crown-5

The 4-acetylaminobenzo[15]crown-5 is an important intermediate in the synthesis of crown ether cyanine dyes1, in addition, the acetylamino can easily be hydrolyzed to be amine2, to our knowledge which also is an usful intermediate3,4, The classical procedure for the synthesis of 4-acetylaminobenzo[15]crown-5 involves several steps2,5: typically nitration of the benzo[15]crown-5, followed by reduction of the introduced nitro group to form amine, and finally, acylation of the amine to give the am…     

Fe_3O_4纳米粒子作为高效、可重复使用催化剂用于无溶剂条件下合成9,9-二甲基-9,10-二氢-8H-苯并[α]占吨11(12H)-酮（英文）

A simple and efficient method for the synthesis of 9,9‐dimethyl‐9,10‐dihydro‐8H‐benzo‐[α]xanthen‐11(12)‐one derivatives (DDBXs) was developed by the condensation reaction of various substituted aryl aldehydes with 2‐naphthol and dimedone using Fe3O4 magnetic nanoparticles (MNPs) as a heterogeneous catalyst under solvent‐free conditions at 90–110 °C.The experimental procedure is very simple,the products are formed in high yields and the catalyst is easily separated by applying an external magnetic field.     

Coupling Reaction of 4-Chloro-7-H-Pyrrolo[2,3-d]Pyrimidine with 2,3,5-Tri-O-Acetyl-β-D-Ribofuranosyl Chloride

Tubercidin (4-amino-7--D-riobofuranosyl-7-H-pyrrolo[2,3-d]pyrimidine) 1, an antibio-tic substance produced in the culture broth of Streptomyces tubericidus1, is an adenosine analog in which N-7 is replaced by a carbon atom. It has attracted much attention due to the biological activities for the growth inhibition of certain tumors, and many derivatives of tubercidin have been synthesized2-5.For the synthesis of tubercidin analogs, 4-chloro-7-H-pyrrolo[2,3-d]pyrimidine-2,3,5-tri-O-acetyl--D-r…     

A facile electrochemical method for the synthesis of new sulfonamide derivatives of potential biological significance

The electrochemical synthesis of some new sulfonamide derivatives was carried out via the electrochemical oxidation of 2,3-dihydrophthalazine-l,4-dione （1） in the presence of arylsulfinic acids （2a and 2b） as nucleophiles. The results show that, the electrogenerated phthalazine-l,4-dione （lox） participates in a Michael type addition reaction with 2a or 2b and via an EC mechanism to produce the corresponding sulfonamide derivatives. This method provides a one-pot procedure for the synthesis of new sulfonamide derivatives of potential biological significance in good yields without using toxic reagents at a carbon electrode in an environmentally friendly manner.     

Synthesis of two-dimensional π-conjugated polymers pendent with benzothiadiazole and naphtho[1,2-c:5,6-c]bis[1,2,5]thiadiazole moieties for polymer solar cells

Four new 2D donor–acceptor conjugated polymers were designed and synthesized.These new polymers comprised fluorenealt-triphenylamine or carbazole-alt-triphenylamine as the backbones,and pendants with 2,1,3-benzothiadiazole(BT)or naphtho[1,2-c:5,6-c]bis[1,2,5]thiadiazole(NT)in a triphenylamine unit as the side groups.By changing the acceptor BT for a stronger electron-withdrawing unit of NT moiety in the side chain,the energy levels,absorption spectra,band gaps,and charge-transport abilities of the resultant polymers could be effectively tuned.Bulk heterojunction solar cells with these polymers as the electron donors and(6,6)-phenyl-C71-butyric acid methyl ester as the electron acceptor exhibited high open-circuit voltage(more than 0.8 e V).The power conversion efficiency can be improved from 1.37%to 3.52%by replacing the BT with an NT moiety,which indicates that introducing NT as the side-chain building block can be an effective strategy to construct efficient 2D conjugated polymers for PSCs.     

Fe_3O_4@MCM-48–SO_3H:合成苯并[f]色烯并[2,3-d]嘧啶酮的高效、可磁性分离纳米催化剂(英文)

Sulfonic acid groups were grafted onto three different types of synthesized magnetic nanoparticles, namely Fe3O4, Fe3O4@SiO2, and Fe3O4@MCM-48. The sulfonic acid-functionalized nanoparticles were evaluated as catalysts for the synthesis of 5-aryl-1H-benzo[f]chromeno[2,3-d]pyrimidine-2,4(3H,5H)-dione derivatives in terms of activity and recyclability. Their catalytic activities were compared with that of the homogeneous acid catalyst 1-methylimidazolium hydrogen sulfate([HMIm][HSO4]). The activity of Fe3O4@MCM-48–SO3H was comparable to those of the other heter-ogeneous and homogeneous catalysts.     

Synthesis of thiopyrano[4″,3″:4′,5′]pyrido[3′,2′:4,5]furo[3,2-d]pyrimidines

<正>Reactions of the 6-hydroxy-thiopyrano[3,4-c]pyridine-5-carbonitrile derivative 1 withα-halo-carbonyl compounds gave the ortho-substituted intermediates 2a-c which were converted into furo[2,3-b]thiopyrano[4,3-d]pyridines 3a-c by fusion of a furan moiety under basic conditions.Further cyclization of 3a-c led to a fusion of a pyrimidine ring,yielding the tetracyclic products 6,7 and 8.In addition,condensation of 6 with various aromatic aldehydes afforded the corresponding imines 9a,b.Mannich reaction of 7 gave products 10a,b.