Ponderomotive ion acceleration in dense plasmas at super-high laser intensities

Short laser pulses at super-high intensities such as those proposed in the Extreme Light Infrastructure (ELI) project open new prospects for efficient acceleration of ions in overdense plasmas. A simple analytical model and numerical simulations demonstrate that pulses with intensities exceeding 10²² W/cm² may efficiently accelerate ions to high energies up to a few GeV. Maximum ion energy and the energy spectrum of the accelerated ions can be tuned by an appropriate choice of laser pulse intensity and duration at a given plasma density distribution.     

A comparative study of the ionic keV X-ray line emission from plasma produced by the femtosecond,picosecond and nanosecond duration laser pulses

We report here an experimental study of the ionic keV X-ray line emission from magnesium plasma produced by laser pulses of three widely different pulse durations (FWHM) of 45 fs, 25 ps and 3 ns, at a constant laser fluence of ∼1.5 × 10⁴ J cm^− 2. It is observed that the X-ray yield of the resonance lines from the higher ionization states such as H- and He-like ions decreases on decreasing the laser pulse duration, even though the peak laser intensities of 3.5 × 10¹⁷ W cm^− 2 for the 45 fs pulses and 6.2 × 10¹⁴ W cm^− 2 for the 25 ps pulses are much higher than 5 × 10¹² W cm^− 2 for the 3 ns laser pulse. The results were explained in terms of the ionization equilibrium time for different ionization states in the heated plasma. The study can be useful to make optimum choice of the laser pulse duration to produce short pulse intense X-ray line emission from the plasma and to get the knowledge of the degree of ionization in the plasma.     

Ion acceleration from aluminium plasma generated by a femtosecond laser in different conditions

Non-equilibrium plasma was obtained by irradiating Al foils in vacuum with a femtosecond (fs) laser at intensities of the order of 10¹⁸ W/cm². Protons and other light ions were accelerated in the forward direction by using the target-normal-sheath acceleration regime. Time-of-flight technique was employed to measure the ions' kinetic energy using SiC detectors placed at known distances and angles. The ion acceleration was monitored under different conditions of laser focal position, laser pulse energy, and laser contrast. The target was irradiated using different thicknesses and anti-reflecting graphene films. By optimizing the laser parameters, irradiation conditions, and target properties, it was possible to accelerate up to 2.3 MeV per charge state, as will be presented and discussed.     

Generation of fast ions in femto-and picosecond laser plasmas at low intensities of the heating radiation

X-ray spectra from Teflon targets irradiated by laser pulses with a duration of 60 fs to 1 ps have been investigated experimentally. It is shown that, when the contrast of the laser pulse is sufficiently low, the effect of self-focusing of the main laser pulse in the plasma produced by the prepulse can significantly enhance the generation efficiency of fast particles. In this case, ions with energies as high as ～1 MeV are observed at relatively low laser intensities, q _las ≈ (4–6) × 10¹⁶ W/cm².     

Six MeV proton acceleration from plasma generated by high-intensity laser using advanced thin polyethylene targets

Proton acceleration can be induced by non-equilibrium plasma developed by high-intensity laser pulses, at 10¹⁶ W/cm², irradiating different types of thin polyethylene targets. The process of proton acceleration and directive yield emission was investigated, optimizing the laser parameters, the irradiation conditions, and the target properties. The use of 600 J pulse energy, a laser focalization inducing self-focusing effects and advanced targets with embedded nanoparticles and optimal thicknesses, has permitted to accelerate forward protons up to the energies of about 6 MeV and amount of the order of 10¹⁵ H⁺/pulse. High proton energy is obtained using thin foils enriched with gold nanoparticles, whereas high proton yield is obtained using targets with a thickness of about 10 μm. The plasma diagnostics using SiC semiconductor detectors in time-of-flight configuration was fundamental to monitor the optimal conditions to improve the plasma processes concerning the ion acceleration and the X-ray and relativistic electron emission.     

Tungsten ions produced by infrared pulsed laser irradiation

Energetic ions have been obtained irradiating a tungsten target with a Q-switched Nd:Yag laser, 1064?nm wavelength, 9?ns pulse width, 900?mJ maximum pulse energy and power density of the order of 10¹⁰?W/cm². The laser-target interaction induces a strong metal etching with production of plasma in front of the target. The plasma contains neutrals and ions with high charge state. Time-of-flight measurements are presented for qualitative analysis of the ion production. A cylindrical electrostatic ion analyzer permits measuring of the yield of emitted ions, the charge state of detected ions and the ion energy distribution. Measurements indicate that, at a laser fluence of the order of 100?J/cm², the charge state may reach 9+ and the ion energy reaches about 5?keV. The ion energy distribution is given as a function of the charge state. Experimental results indicate that an electrical field is developed along the normal to the plane of the target surface, which accelerates the ions up to high velocity. The ion velocity distributions follow a “shifted Maxwellian distribution”, which the author has corrected for the Coulomb interactions occurring inside the plasma.     

Forward plasma emission through laser–foil interaction with nanosecond lasers

Fundamental investigations of plasma diagnostics of a forward laser plasma acceleration employing laser–foil interactions were conducted for an Al-foil target irradiated with an Nd:YAG laser of 1 J/pulse with pulse width of 10 ns. Temporal evolutions of electron temperatures and densities were evaluated with electrostatic probes and spectroscopic diagnostics. From the results, it was shown that an average speed of ions in a forward direction was about 40 km/s. Also, it was shown that the plasma temperature and density were about 2.5–8 eV and 10¹⁰ cm⁻³, respectively.     

Protons and carbon ions acceleration in the target-normal-sheath-acceleration regime using low-contrast fs laser and metal-graphene targets

fs pulsed lasers at an intensity of the order of 10¹⁸ W/cm², with a contrast of 10⁻⁵, were employed to irradiate thin foils to study the target-normal-sheath-acceleration (TNSA) regime. The forward ion acceleration was investigated using 1/11 µm thickness foils composed of a metallic sheet on which a thin reduced graphene oxide film with 10 nm thickness was deposited by single or both faces. The forward-accelerated ions were detected using SiC semiconductors connected in time-of-flight configuration. The use of intense and long pre-pulse generating the low contrast does not permit to accelerate protons above 1 MeV because it produces a pre-plasma destroying the foil, and the successive main laser pulse interacts with the expanding plasma and not with the overdense solid surface. Experimental results demonstrated that the maximum proton energies of about 700 keV and of 4.2 MeV carbon ions and higher were obtained under the condition of the optimal acceleration procedure. The measurements of ion energy and charge states confirm that the acceleration per charge state is measurable from the proton energy, confirming the Coulomb–Boltzmann-shifted theoretical model. However, heavy ions cannot be accelerated due to their mass and low velocity, which does not permit them to be subjected to the fast and high developed electric field driving the light-ion acceleration. The ion acceleration can be optimized based on the laser focal positioning and on the foil thickness, composition, and structure, as it will be presented and discussed.     

On the effect of surface rippling on the generation of harmonics in laser plasmas

Experiments were carried out using a tightly focused, prepulse-free KrF laser of 700 fs pulse duration. Harmonics up to 20 eV were generated at an intensity of 1.5×10¹⁷ W/cm² from the plasma on the surface of solid targets. The observation of diffuse harmonics propagation for intensities above 10¹⁶ W/cm² and the fact that polarization of the harmonics appears to be mixed for the highest intensities are attributed to the surface rippling which is an intrinsic consequence of the unstable balance between plasma expansion and light pressure. PACS 52.25.Os; 52.35.Py; 52.50.Jm     

Acceleration of heavy multicharged ions up to 1 MeV from a cleaned solid target irradiated by a femtosecond laser pulse with an intensity of 10<Superscript>16</Superscript> W/cm<Superscript>2</Superscript>

A noticeable increase in the charge and energy of ions accelerated from a solid tungsten target irradiated by a femtosecond laser pulse with an intensity higher than 10¹⁶W/cm² has been found when the target surface is precleaned by a nanosecond laser pulse with an energy density of 3 J/cm². Tungsten ions with charges up to +29 and energies up to 1 MeV were detected in this case, while the charge and energy of tungsten ions from a target with an uncleaned surface do not exceed +3 and 12 keV, respectively.     

Generation of a fast-ion beam upon the interaction of a multiterawatt picosecond laser pulse with a solid target

The parameters of fast particles generated upon the interaction of 10¹⁹ W/cm² laser pulses with solid targets are studied. The spatial and energy parameters of fast ions are investigated. It is found that approximately 1–3% of the laser energy is transformed to the energy of mega-and submegaelectronvolt ions at laser pulse intensities ≥10¹⁸ W/cm². It is shown experimentally that an ion beam is directed perpendicular to the target surface. The analytic and numerical simulations agree with experimental results and predict the propagation of fast electrons in the mirror direction with respect to the incident laser beam and of ions perpendicular to the target. The theoretical calculations are compared with the experimental output and spectra of fast electrons and ions.     

Three-dimensional simulation of laser–plasma-based electron acceleration

A sequential three-dimensional (3D) particle-in-cell simulation code PICPSI-3D with a user friendly graphical user interface (GUI) has been developed and used to study the interaction of plasma with ultrahigh intensity laser radiation. A case study of laser–plasma-based electron acceleration has been carried out to assess the performance of this code. Simulations have been performed for a Gaussian laser beam of peak intensity 5 × 10¹⁹ W/cm² propagating through an underdense plasma of uniform density 1 × 10¹⁹ cm^− 3, and for a Gaussian laser beam of peak intensity 1.5 × 10¹⁹ W/cm² propagating through an underdense plasma of uniform density 3.5 × 10¹⁹ cm^− 3. The electron energy spectrum has been evaluated at different time-steps during the propagation of the laser beam. When the plasma density is 1 × 10¹⁹ cm^− 3, simulations show that the electron energy spectrum forms a monoenergetic peak at ~14 MeV, with an energy spread of ±7 MeV. On the other hand, when the plasma density is 3.5 × 10¹⁹ cm^− 3, simulations show that the electron energy spectrum forms a monoenergetic peak at ~23 MeV, with an energy spread of ±7.5 MeV.     

X-ray emission from short-pulse laser plasmas

Highly intense picosecond and subpicosecond laser pulses interacting with solids can create hot and dense plasmas which emit x-ray pulses in a broad spectral range from 100 eV up to MeV. The duration of these x-ray pulses depends on the transient behaviour of the relaxation and recombination mechanisms, as well as on the lifetime of energetic electrons produced via nonlinear processes in the plasma. This paper reports experiments using a 1.5-ps laser pulse with high constrast ratio (up to 10¹⁰) and intensities up to 10¹⁸ W cm^-2 irradiating solid targets. Both the line spectrum characteristics of a magnesium plasma, recorded using crystal spectrometers with high spectral resolution, and kinetic calculations have allowed the deduction of plasma parameters in the process of plasma evolution. In addition, hard x-ray pulses from a tantalum plasma were measured and their scaling was explained as bremsstrahlung emission from energetic electrons. Absolute dose values of x-ray pulses are given.     

Eight MeV per charge state from 300 ps laser ion acceleration by using micrometric foils

Proton acceleration using high-intensity laser pulses, at 10¹⁶ W/cm² was studied irradiating different types of thin metal and plastic targets having 1-micron thickness. The maximization of the proton energy process was investigated optimizing the laser parameters, the irradiation conditions and the target properties. Employing 600–700 J laser pulse energy, a focalization inducing self-focusing effects and using targets with optimized thickness, it was possible to accelerate protons up to energies of above 8 MeV. The time-of-flight diagnostics has allowed to monitor the plasma properties and to control the ion acceleration process.     

Production of ion and electron streams by pulsed-laser ablation of Ta and Cu

A Nd:YAG laser with 10⁹ W/cm ² pulse intensity, operating at 532 nm wavelength, is used to ablate Ta and Cu targets placed in vacuum. The ablation process generates a plasma in front of the target surface, which expands along the normal to target surface. The ion and electron emissions from the plasma were measured by Faraday cups placed at different angles with respect to the normal to target surface. In the range of laser intensities from 10⁷ to 10⁹ W/cm², the fast electron yield is lower than the ion yield and it increases at higher laser intensities. The ablation threshold, the emission yield, the ion and electron average energies and the plasma ion and electron temperatures were measured for ion and fast electron streams.     

Induced photonuclear interaction by Rhodotron-TT200 10 MeV electron beam

In this paper the photonuclear interaction induced by 10 MeV electron beam generating high-intensity neutrons is studied. Since the results depend on the target material, the calculations are performed for Pb, Ta and W targets which have high Z, in a simple geometry. MCNPX code has been used to simulate the whole process. Also, the results of photon generation has been compared with the experimental results to evaluate the reliability of the calculation. The results show that the obtained neutron flux can reach up to 10¹² n/cm²/s with average energies of 0.9 MeV, 0.4 MeV and 0.9 MeV for these three elements respectively with the maximum heat deposited as 3000 W/c³, 4500 W/c³ and 6000 W/c³.     

Laser ablation of carbon at the threshold of plasma formation

The ionization of laser-ablated vapours with lasers producing ns duration pulses at various wavelengths has been studied in order to understand the mechanisms of the vapour-plasma transition. It has been established that there are several regimes characterizing the laser-target interaction which depend on laser intensity, wavelength, and pulse duration. The range of laser intensities for optimal laser evaporation is determined by the condition of transparent vapours. The intensity range is upper-limited by the opaque plasma formation due to vapour optical breakdown. Results are given for laser evaporation of graphite with Nd:YAG laser (1.064 7m), KrF laser (248 nm) and ArF laser (193 nm). For the UV laser wavelength the regime of skin-effect interaction was proposed as the mechanism of ion acceleration, and the range of validity of the skin-effect mode was established. With UV lasers the interaction has a bimodal nature: the interaction may proceed initially in the skin effect regime, resulting in a few high-energy ions, until hydrodynamic expansion begins at a later stage. The skin-effect interaction at the initial stage of the UV laser pulse gives the first, to our knowledge, explanation for the acceleration of ions up to ~100 eV at low laser intensities of 10⁸-10⁹ W/cm² and ns-range pulse duration.     

Laser-driven generation of fast particles

The great progress in high-peak-power laser technology has resulted recently in the production of ps and subps laser pulses of PW powers and relativistic intensities (up to 10²¹ W/cm²) and has laid the basis for the construction of multi-PW lasers generating ultrarelativistic laser intensities (above 10²³ W/cm²). The laser pulses of such extreme parameters make it possible to produce highly collimated beams of electrons or ions of MeV to GeV energies, of short time durations (down to subps) and of enormous currents and current densities, unattainable with conventional accelerators. Such particle beams have a potential to be applied in numerous fields of scientific research as well as in medicine and technology development. This paper is focused on laser-driven generation of fast ion beams and reviews recent progress in this field. The basic concepts and achievements in the generation of intense beams of protons, light ions, and multiply charged heavy ions are presented. Prospects for applications of laser-driven ion beams are briefly discussed.     

Improvement of laser keyhole formation with the assistance of arc plasma in the hybrid welding process of magnesium alloy

In the previous work, low-power laser/arc hybrid welding technique is used to weld magnesium alloy and high-quality weld joints are obtained. In order to make clear the interactions between low-power laser pulse and arc plasma, the effect of arc plasma on laser pulse is studied in this article. The result shows that the penetration of low-power laser welding with the assistance of TIG arc is more than two times deeper than that of laser welding alone and laser welding transforms from thermal-conduction mode to keyhole mode. The plasma behaviors and spectra during the welding process are studied, and the transition mechanism of laser-welding mode is analyzed in detail. It is also found that with the assistance of arc plasma, the threshold value of average power density to form keyhole welding for YAG laser is only 3.3×10⁴ W/cm², and the average peak power density is 2.6×10⁵ W/cm² in the present experiment. Moreover, the distribution of energy density during laser pulse is modulated to improve the formation and stability of laser keyholes.     

On the role of prepulses during solid target heating by picosecond laser pulses

X-ray emission spectra of the plasma created at the surface of magnesium, aluminum, copper, and zinc targets heated by 1-ps laser pulses with a peak power density of up to 10¹⁶ W/cm² were measured. The effect of a picosecond prepulse on the spectra was studied for various power densities and intensity contrasts of the main laser pulse. It is established that the emission spectra of laser plasmas are weakly affected by a change from 10⁵ to 10⁷ in the main pulse contrast relative to the first prepulse. Variations in the parameters of emission from aluminum and magnesium plasmas were calculated using relative intensities and widths of the resonance lines of H-and He-like ions and their two-electron satellite peaks.