Brilliant Blue R Adsorption from Aqueous Solution on Activated Carbon Produced from Corncob Waste

Brilliant blue R adsorption from aqueous solution on activated carbon produced from corncob waste was investigated. The carbon samples were characterized by XRD, SEM, EDS and FTIR methods. The surface functional groups (carboxyl, lactone or phenol, ether, hydroxyl) disappeared at high activation temperature, resulting in a high amount of carbon with respect to oxygen. The kinetic studies of the adsorption of brilliant blue R on carbon at 10 and 45 °C showed that the first order and intraparticle diffusion models apply to the data. The reaction rate increased with the increase in temperature of adsorption/activation. Thermodynamic parameters like ΔE^#, ΔH^# and ΔS^# for adsorption were calculated from the kinetic data. The positive value of ΔH^# shows the endothermic nature of adsorption which decreased with the increase in adsorption/activation temperature. The negative values of ΔS^# reflect a decrease in the disorder of the system at the solid‐solution interface during adsorption. Equilibrium studies showed that the data fits the Langmuir model.     

Norfloxacin La(III)-based complex: synthesis,characterization, and DNA-binding studies

A La(III) complex, [La^IIICl₂(NOR)₂]Cl (2), containing norfloxacin (NOR) (1), a synthetic fluoroquinolone antibacterial agent, has been synthesized and characterized by elemental analysis, IR, UV–vis spectra and ¹H NMR spectroscopy, and molar conductance measurements. The interaction between 2 and CT-DNA was investigated by steady-state absorption and fluorescence techniques in different pH media, and showed that 2 could bind to CT-DNA presumably via non-intercalative mode and the La(III) complex showed moderate ability to bind CT-DNA compared to other La(III) complexes. The binding site number n, and apparent binding constant K_A, corresponding thermodynamic parameters ΔG^#, ΔH^#, ΔS^# at different temperatures were calculated. The binding constant (K_A) values are 0.23 ± 0.05, 0.56 ± 0.05, and 0.18 ± 0.08 × 10⁵ L mol^?1 for pH 4, 7, and 11, respectively. It was also found that the fluorescence quenching mechanism of CT-DNA by La(III) complex was a static quenching process.     

Factors influencing the mechanism of surfactant catalyzed reaction of vitamin C-ferric chloride hexahydrate system

The kinetics of vitamin C by ferric chloride hexahydrate has been investigated in the aqueous ethanol solution of basic surfactant viz. octadecylamine (ODA) under pseudo-first order conditions. The critical micelle concentration (CMC) of surfactant was determined by surface tension measurement. The effect of pH (2.5–4.5) and temperature (15–35°C) in the presence and absence of surfactant were investigated. Activation parameters, ΔE _a, ΔH ^#, ΔS ^#, ΔG ^≠, for the reaction were calculated by using Arrhenius and Eyring plot. Surface excess concentration (Γ_max), minimum area per surfactant molecule (A _min), average area occupied by each molecule of surfactant (a), surface pressure at the CMC (Π_max), Gibb’s energy of micellization (ΔG _M°), Gibb’s energy of adsorption (ΔG _ad°), were calculated. It was found that the reaction in the presence of surfactant showed faster oxidation rate than the aqueous ethanol solution. Reaction mechanism has been deduced in the presence and absence of surfactant.     

Kinetic,equilibrium and thermodynamic study of 2-chlorophenol adsorption onto Ricinus communis pericarp activated carbon from aqueous solutions

ABSTRACT

This study reports on the adsorption of 2-chlorophenol from an aqueous solution using activated carbon prepared by H₂SO₄ activation of the pericarp of Ricinus communis (RCAC). The pericarp was carbonized and activated by treating with H₂SO₄ solution followed by heating in an oven at 105°C for 12 hrs. Batch adsorption experiments were carried out as a function of pH, contact time, initial concentration of the adsorbate, adsorbent dosage and temperature of the solution. Kinetic data were best fit to a pseudo-first-order rate equation for the adsorption of 2-chlorophenol on RCAC. Thermodynamic parameters ΔH^o, ΔS^o and ΔG^o for the adsorption were also determined which shows that adsorption on the surface of RCAC was spontaneous in nature, and exothermic between temperatures of 20°C and 80°C. The equilibrium data better fit the Langmuir isotherm model for 2-chlorophenol adsorption on RCAC. IR spectrum for loaded and unloaded RCAC was obtained and found to be in good agreement.     

Effect of solvent on the free energy of activation of S_N2 reaction between phenacyl bromide and amines

The kinetics of SN2 reaction between phenacyl bromide and various amines in 12 different solvents were studied. Solvent effects on the rate of this reaction and free energy of activation, ΔG# , were interpreted by applying the Abraham-Kam-let-Taft (AKT) equation. UK solvent polarity (π1*), solvent hydrogen-bond basicity (β1) and Hildebrand cohesive density energy (δH2) are those parameters which increase the rate constant and decrease ΔG# , while solvent hydrogen-bond acidity (α1) will have the compensatory effect. A comparison among obtained values of second rate constants, k2, for different amines in a given solvent indicates that the amine reactivities are highly dependent on their structures. The consequent decrease of the rate constant for different amines in any given solvent was found to be: primary > secondary> tertiary. This order results from steric effects of amines.     

Kinetic Study on the Isomerization of Perindopril by HPLC

The isomerization of perindopril has been investigated using dynamics chromatography and an unified equation introduced by Trapp that was based on stochastic and theoretical plate models to determine the energies. The isomerization rate constants and Gibbs activation energies of isomerization are directly calculated from chromatographic peak parameters, i.e., retention times of the inter-converting species, peak width at half height, and relative plateau height. From the rate constant \( k_{1}^{ue} (T) \), measured at variable temperatures, the kinetic eyring activation parameters ΔG ^#, ΔH ^# and ΔS ^# of isomerization of perindopril were obtained. By variation of the flow rate of the mobile phase, the expected independence of the isomerization barrier from the chromatographic time scale was demonstrated for the first time. The relationships between peak shape and chromatographic conditions, such as flow rate, temperature, pH, organic modifier, and β-cyclodextrin, such as an additive, were investigated. In addition, an NMR investigation on perindopril was described.

     

Ag(I)‐Catalyzed Chlorination of Linezolid during Water Treatment: Kinetics and Mechanism

The kinetic and mechanistic study of Ag(I)‐catalyzed chlorination of linezolid (LNZ) by free available chlorine (FAC) was investigated at environmentally relevant pH 4.0–9.0. Apparent second‐order rate constants decreased with an increase in pH of the reaction mixture. The apparent second‐order rate constant for uncatalyzed reaction, e.g., k″_app = 8.15 dm³ mol⁻¹ s⁻¹ at pH 4.0 and k″_app. = 0.076 dm³ mol⁻¹ s⁻¹ at pH 9.0 and 25 ± 0.2°C and for Ag(I) catalyzed reaction total apparent second‐order rate constant, e.g., k″_app = 51.50 dm³ mol⁻¹ s⁻¹ at pH 4.0 and k″_app. = 1.03 dm³ mol⁻¹ s⁻¹ at pH 9.0 and 25 ± 0.2°C. The Ag(I) catalyst accelerates the reaction of LNZ with FAC by 10‐fold. A mechanism involving electrophilic halogenation has been proposed based on the kinetic data and LC/ESI/MS spectra. The influence of temperature on the rate of reaction was studied; the rate constants were found to increase with an increase in temperature. The thermodynamic activation parameters E_a, ΔH^#, ΔS^#, and ΔG^# were evaluated for the reaction and discussed. The influence of catalyst, initially added product, dielectric constant, and ionic strength on the rate of reaction was also investigated. The monochlorinated substituted product along with degraded one was formed by the reaction of LNZ with FAC.     

Catalytic Effect of Cetyltrimethylammonium Bromide on the Oxidation of Oxalic Acid by N-Bromophthalimide in Acidic Medium

The kinetics of micellar catalyzed oxidation of oxalic acid [OA] by N-bromophthalimide was studied in the presence of perchloric acid at 308 K. The orders of reaction with respect to [Oxalic acid], [oxidant], and [H⁺] were found to be fractional, first and negative fractional order respectively. Cationic micelles of cetyltrimethylammonium bromide increased the reaction rate. The effect of phthalimide, mercuric acetate and inorganic salts, that is, [Cl^?][Br^?] has also been done. The rate reaction decreases with increasing dielectric constant of the medium. The results are treated quantitatively in terms of Piszkiewicz and Berezin models. The rate constant (K_obs), cooperatively index (n), binding constant (k_s + k_o), and corresponding activation parameters (E_a, ΔH^#, ΔS^#, and ΔG^#) were determined. A suitable mechanism consistent with the experimental finding has been proposed.     

Investigation of kinetic and mechanism of triphenylphosphine addition to para‐naphthoquinone

This work reports the results of a kinetic and mechanistic investigations of the addition reaction of triphenylphosphine to para‐naphtoquinone in 1,2‐dichloromethane as solvent. The order of reaction with respect to the reactants was determined using initial rate method, and the rate constant was obtained on the basis of pseudo‐first‐order method. Variable time method using Uv–Vis spectrophotometry (at 400 nm) was utilized for monitoring this addition reaction, for which the following Arrhenius equation was obtained: The resulting activation parameters E_a, ΔH^#, ΔG^#, and ΔS^# at 300 K were 13.63, 14.42, 18.75 kcal mol^?1, and ?14.54 cal mol^?1K^?1, respectively. The results suggest that the reaction is first order with respect to both triphenylphosphine and para‐naphthoquinone. © 2005 Wiley Periodicals, Inc. Int J Chem Kinet 37: 427–433, 2005     

Kinetics and mechanism study of aniline addition to ethyl propiolate

The kinetics of the addition reaction of aniline to ethyl propiolate in dimethylsulfoxide (DMSO) as solvent was studied. Initial rate method was used to determine the order of the reaction with respect to the reactants, and pseudo‐first‐order method was used to calculate the rate constant. This reaction was monitored by UV–Vis spectrophotometer at 399 nm by the variable time method. On the basis of the experimental results, the Arrhenius equation for this reaction was obtained as log k = 6.07 ‐ (12.96/2.303 RT). The activation parameters, E_a, ΔH^#, ΔG^#, and ΔS^# at 300 K were 12.96, 13.55, 23.31 kcal mol^?1 and ?32.76 cal mol^?1 K^?1, respectively. The results revealed a first‐order reaction with respect to both aniline and ethyl propiolate. In addition, based on the experimental results and using also density functional theory (DFT) at B3LYP/6‐31G* level, a mechanism for this reaction was proposed. © 2005 Wiley Periodicals, Inc. Int J Chem Kinet 38: 144–151, 2006     

Kinetic study of triphenylphosphine addition to para‐benzoquinone

Kinetics of the addition reaction of triphenylphosphine to para‐benzoquinone in 1,2‐dichloroethane as solvent was studied. Initial rate method was used to determine the order of the reaction with respect to the reactants. Pseudo‐first‐order method was also used to calculate the rate constant. This reaction was monitored by UV‐vis spectrophotometry at 520 nm by variable time method. On the basis of the obtained results, the Arrhenius equation of this reaction was obtained: The activation parameters, E_a, ΔH^#, ΔG^#, and ΔS^# at 300 K were 5.701, 6.294, 19.958 kcal mol^?1 and ?45.853 cal mol^?1 K^?1, respectively. This reaction is first and second order with respect to triphenylphosphine and para‐benzoquinone, respectively. © 2004 Wiley Periodicals, Inc. Int J Chem Kinet 36:472–479, 2004     

Kinetics of oxidation of cysteine and captopril via Cs3[Mo(CN)8] and Cs3[W(CN)8]

The kinetics of the oxidation of cysteine and captopril via octacyanomolybdate(V) and octacyanotungstate(V) in a buffered acidic media (pH range 2.20–4.80) have been studied spectrophotometrically. The rate law for the oxidation is: Rate = k [RSH] [Ox] [H⁺]⁻¹, where RSH is cysteine or captopril and Ox is Cs₃[Mo(CN)₈] or Cs₃[W(CN)₈]. The activation parameters (E_a, ΔH^#, ΔG^#, ΔS^#) for the oxidation of cysteine and captopril via Cs₃[Mo(CN)₈] or Cs₃[W(CN)₈] have been determined. The results indicate that Cs₃[Mo(CN)₈] is more reactive than Cs₃[W(CN)₈] as an oxidizing agent. Effects of pH, ionic strength, temperature, dielectric constant of the reaction medium and copper(II) ions on the oxidation rate have been studied. Mechanisms for the oxidation of cysteine to cystine and captopril to the corresponding disulfide have been proposed.     

Activation parameters of supercritical and gas-phase β-pinene thermal isomerization

New data on enthalpy and entropy contributions to the energy barrier of β-pinene thermal isomerization were obtained. The rate of β-pinene conversion is higher in supercritical EtOH (P = 120 atm) than in the gas phase (P ≤ 1 atm, without solvent, or for inert carrier gas N₂) at equal temperatures. The highest activation energy E _Σ of total β-pinene conversion is also observed in reactions in the supercritical (sc) condition. Activation parameters ΔH _Σ ^# , ΔS _Σ ^# , and ΔG _Σ ^# depend strongly on the reaction pressure. Thus, at P ≤ 1 atm (gas-phase reaction) the values of ΔS _Σ ^# are negative, while at sc conditions at P = 120 atm is positive. The linear dependences lnk _Σ0 ? E _Σ and ΔS _Σ ^# ? ΔS _Σ ^# indicate an isokinetic relation (IKR) and enthalpy-entropy compensation effect (EEC). The isokinetic temperature was calculated (T _iso = 605.5 ± 22.7 K). It was shown that elevation of temperature reduces the value of ΔG _Σ ^# (T) upon sc thermolysis only, whereas in all gas-phase reactions ΔG _Σ ^# (T) increases. At equal reaction temperatures, the greatest values of K _eq ^# (T) proved to be typical for thermolysis in sc-EtOH. We hypothesize that the rate of total β-pinene conversion increases dramatically due to a considerable shift in equilibrium toward higher concentrations of activated complex y _TS ^# . A detailed analysis of activation parameters shows that the IKR and EEC coincide, evidence of a common mechanism of β-pinene conversion observed under different reaction conditions, including thermolysis in sc-EtOH.     

Synthesis,characterization, and mechanism of trans-dichlorido-bis-(ethylenediamine)cobalt(III) with L-cystine in the presence of chloride

Substitution reactions of trans-[CoCl₂(en)₂]Cl (where en?=?ethylenediamine) with L-cystine has been studied in 1.0?×?10^?1?mol?dm^?3 aqueous perchlorate at various temperatures (303–323?K) and pH (4.45–3.30) using UV-Vis spectrophotometer on various [Cl^?] from 0.05 to 0.01?mol?L^?1. The products have been characterized by their physico-chemical and spectroscopic data. Trans-[CoCl(en)₂(H₂O)]²⁺, from the hydrolysis of trans-[CoCl₂(en)₂]⁺ in the presence of Cl^?, formed a complex with L-cystine at all temperatures in 1?:?1 molar ratio. L-cystine is bidentate to Co(III) through Co–N and Co–S bonds. Product formation and reversible reaction rate constants have been evaluated. The rate constants for SN_i mechanism have been evaluated and activation parameters E _a, ΔH ^#, and ΔS ^# are determined.     

Synthesis,structure, and kinetic studies on [RuCl2(NCCH3)2(cod)]

[RuCl₂(NCCH₃)₂(cod)], an alternative starting material to [RuCl₂(cod)] _n for the preparation of ruthenium(II) complexes, has been prepared from the polymer compound and isolated in yields up to 87% using a new work-up procedure. The compound has been obtained as a yellow solid without water of crystallization. The complexes [RuCl₂(NCR)₂(cod)] spontaneously transform into dimers [Ru₂Cl(μ-Cl)₃(cod)₂(NCR)] (R?=?Me, Ph). ¹H NMR kinetic experiments for these transformations evidenced first-order behavior. [RuCl₂(NCPh)₂(cod)] dimerizes slower by a factor of ten than [RuCl₂(NCCH₃)₂(cod)]. The following activation parameters, ΔH ^#?=?114?±?3?kJ?mol^?1 and ΔS ^#?=?66?±?9?J?K^?1?mol^?1 for R?=?CH₃CN (ΔG ^#?=?94?±?5?kJ?mol^?1, 298.15?K) and ΔH ^#?=?122?±?2?kJ?mol^?1 and ΔS ^#?=?75?±?6?J?K^?1?mol^?1 for R?=?Ph (ΔG ^#?=?100?±?4?kJ?mol^?1, 298.15?K), have been calculated from the first-order rate constants in the temperature range 294–323?K. The kinetic parameters are in agreement with a two-step mechanism with dissociation of acetonitrile as the rate-determining step. The molecular structures of [Ru₂Cl(μ-Cl)₃(cod)₂(NCR)] (R?=?Me, Ph) have been determined by X-ray diffraction.     

New insight into the substituent effects on the hydrolytic deamination of saturated and unsaturated cytosine

Ab initio calculations were carried out to understand the effect of electron donating groups (EDG) and electron withdrawing groups (EWG) at the C5 position of cytosine (Cyt) and saturated cytosine (H₂Cyt) of the deamination reaction. Geometries of the reactants, transition states, intermediates, and products were fully optimized at the B3LYP/6-31G(d,p) level in the gas phase as this level of theory has been found to agree very well with G3 theories. Activation energies, enthalpies, and Gibbs energies of activation along with the thermodynamic properties (ΔE, ΔH, and ΔG) of each reaction were calculated. A plot of the Gibbs energies of activation (ΔG^‡) for C5 substituted Cyt and H₂Cyt against the Hammett σ-constants reveal a good linear relationship. In general, both EDG and EWG substituents at the C5 position in Cyt results in higher ΔG^‡ and lower σ values compared to those of H₂Cyt deamination reactions. C5 alkyl substituents ( H,  CH₃,  CH₂CH₃,  CH₂CH₂CH₃) increase ΔG^‡ values for Cyt, while the same substituents decrease ΔG^‡ values for H₂Cyt which is likely due to steric effects. However, the Hammett σ-constants were found to decrease at the C5 position of cytosine (Cyt) and saturated cytosine (H2Cyt) on the deamination reaction. Both ΔG^‡ and σ values decrease for the substituents Cl and Br in the Cyt reaction, while ΔG^‡ values increase and σ decrease in the H₂Cyt reaction. This may be due to high polarizability of bromine which results in a greater stabilization of the transition state in the case of bromine compared to chlorine. Regardless of the substituent at C5, the positive charge on C4 is greater in the TS compared to the reactant complex for both the Cyt and H₂Cyt. Moreover, as the charges on C4 in the TS increase compared to reactant, ΔG^‡ also increase for the C5 alkyl substituents ( H,  CH₃,  CH₂CH₃,  CH₂CH₂CH₃) in Cyt, while ΔG^‡ decrease in H₂Cyt. In addition, analysis of the frontier MO energies for the transition state structures shows that there is a correlation between the energy of the HOMO–LUMO gap and activation energies.     

Effect of acetonitrile–water mixtures on the reaction of dinitrochlorobenzene and dinitrochlorobenzotrifluoride with hydroxide ion

The kinetics of alkaline hydrolysis of 2‐chloro‐3,5‐dinitrobenzotrifluoride 1 and 1‐chloro‐2,4‐dinitrobenzene 2 were studied in various acetonitrile–water (AN–H₂O) mixtures (10–90% w/w) at different temperatures. Thermodynamic parameters ΔH^# and ΔS^# show great variation, whereas ΔG^# appears to vary little with the solvent composition presumably due to compensating variations. The results are discussed in terms of the solvent parameters such as preferential solvation, dielectric constant, polarity/polarizability, and hydrogen bond donor and acceptor parameters. It has been found that the factors controlling the reaction rates are the desolvation of OH^?, the solvophobicity of the medium, and free water molecules in rich AN mixed solvent. The data showed that the solvatochromic parameters of (AN–H₂O) mixed solvent are destroyed in the presence of excess OH^?. © 2010 Wiley Periodicals, Inc. Int J Chem Kinet 42: 453–463, 2010     

Thermal and spectral studies of 5-(phenylazo)-2-thiohydantoin and 5-(2- hydroxyphenylazo)-2-thiohydantoin complexes of cobalt(II), nickel(II) and copper(II)

Complexes of 5-(phenylazo)-2-thiohydantoin (L¹) and 5-(2-hydroxyphenylazo)-2-thiohydantoin (HL²) with Co(II), Ni(II) and Cu(II) salts have been synthesised and characterized by elemental analysis, conductivity, magnetic susceptibility, UV-Vis, IR, ESR and TG studies. The magnetic and spectral data suggested octahedral geometry for [L¹M(OAc)₂(H₂O)₂]·xH₂O {M=Ni^ll and Cu^ll} and [L¹CuCl₂(H₂O)]·H₂O (dimeric form for the latter), trigonal bipyramidal geometry for [L²Co(OAc)(H₂O)]·2H₂O, square pyramidal geometry for [L²Ni(OAc)(H₂O)]·H₂O and square planar geometry for [L²CuCl]·2H₂O. TG studies confirmed the chemical formulations of these complexes and showed that their thermal degradation takes place in three to five steps, depending on the type of the ligand and the geometry of the complex. The kinetic parameters (n, E^#, A, ΔH^#, ΔS^# and ΔG^#) of the thermal decomposition stages were computed using the Coats-Redfern and other standard equations and are discussed.     

Kinetics and thermodynamic parameters of the thermal decomposition of imipramine hydrochloride and trimipramine maleate

Thermal decomposition of imipramine hydrochloride and trimipramine maleate has been investigated isothermally and nonisothermally. The kinetic parameters, namely the activation energy E_a and the Arrhenius preexponential term A, were calculated. Applying the theory of activated complex to the process of decomposition one calculated ΔS^≠, ΔH^≠, and ΔG^≠ for the reaction. The values of E_a as well as the thermodynamic functions did not vary significantly with temperature of the reaction whereas the preexponential term showed a significant dependence on the reaction temperature. Both imipramine hydrochloride and trimipramine maleate showed two main steps of decomposition. Each step proved to be a first‐order reaction. The rate constant was calculated for each step, and the results were analyzed statistically. © 2003 Wiley Periodicals, Inc. Int J Chem Kinet 35: 166–179, 2003