High-throughput solid-phase extraction of metal ions using an iminodiacetate chelating porous disk prepared by graft polymerization

A chelating porous sheet for use in solid-phase extraction was prepared by radiation-induced graft polymerization and subsequent chemical modifications. An epoxy-group-containing vinyl monomer was graft-polymerized onto a porous sheet made of polyethylene. The produced epoxy group of the graft chain was converted into an iminodiacetate group. The chelating porous sheet with a density of the iminodiacetate group of 2.1 mol/kg was cut into disks 13 mm in diameter to fit an empty cylindrical cartridge with a capacity of 6 mL. Breakthrough curves using the chelating-porous-disk-packed cartridge overlapped irrespective of the flow rate of the solution ranging up to 1500 mL/h because of negligible diffusional mass-transfer resistance of the copper ions to the iminodiacetate group of the graft chain.     

Binding of dl-tryptophan to BSA adsorbed in multilayers by polymer chains grafted onto a porous hollow-fiber membrane in a permeation mode

An anion-exchange-group-containing porous membrane in the form of a hollow fiber was prepared to immobilize bovine serum albumin (BSA) as a chiral selector. First, an epoxy-group-containing polymer chain was grafted onto the pore surface of the polyethylene porous hollow-fiber membrane pre-irradiated with an electron beam. Second, the epoxy group was converted to diethylamino and 2-hydroxyethylamino groups. Third, a BSA solution was forced to permeate through the pores of the membrane. As a result, 190 mg BSA per gram of membrane, which amounted to a degree of multilayer binding of about four, were immobilized. Subsequently, a racemic solution of tryptophan (0.02 mM) was forced to permeate through the BSA-multilayered porous membrane at a flow rate ranging from 10 to 80 ml/h. A two-stage stepwise concentration change of tryptophan in the effluent was observed due to independent chiral recognition of d- and l-tryptophan by BSA adsorbed in multilayers within the graft chains.     

Combustion synthesis and characterization of porous perovskite catalysts

Porous perovskite-type complex oxides LaCoO₃ and La_0·95Sr_0·05Ni_0·05Co_0·95O₃ were produced by combustion method. The properties of these porous materials such as crystal structures, particle sizes, surface patterns, pore size, surface area and pore volume were characterized by X-ray diffraction( XRD), scanning electron microscopy(SEM) and BET measurements. The results indicated that all porous materials are of the perovskite-type complex oxides. Doping Sr²⁺ ions on site A and doping Ni²⁺ ions on site B entered the crystal lattices of LaCoO₃ in the place of La³⁺ and Co³⁺, respectively, and the maximum peak of XRD patterns of doping sample was weaken and broaden. Morphological microscopy demonstrated agglomerates involved mostly thin smooth flakes and layers perforated by a large number of pores and its lamella decreased with the introduction of Sr²⁺ and Ni²⁺. Hysteresis loop in the N₂ adsorption-desorption isotherm of samples indicated its porous structures and the doping effect on its pore size, surface area and pore volume were improved. The porous catalysts have been tested for methane catalytic combustion and the results showed that these catalysts possessed high catalytic activity.     

三维有序大孔杂化SiO2的制备、表征及应用

将有机-无机杂化功能材料与有序大孔材料独特的有序开孔结构相结合,在制备的三维有序大孔二氧化硅(3DOM Si O2)孔壁上可控接枝带有功能基团的聚合物链段,制备3DOM杂化材料。采用表面引发原子转移自由基(SI-ATRP)接枝技术在3DOM Si O2孔壁上可控接枝聚甲基丙烯酸缩水甘油酯(PGMA)链段,讨论了接枝条件对接枝量及接枝链段分子量的影响,并利用FTIR、SEM、TGA、GPC等对接枝过程进行了表征。PGMA接枝链段上环氧基团可进一步与亲核试剂(二乙醇胺,浓硫酸和二乙烯三胺)发生开环反应,得到一系列带有不同官能团的具有较高接枝密度的功能杂化多孔材料,同时,利用该种材料对水中的水杨酸进行了吸附实验,吸附结果表明经二乙烯三胺开环后得到的功能化多孔材料对水杨酸具有很高的吸附量。     

三维有序大孔杂化SiO2的制备、表征及应用

本研究将有机-无机杂化功能材料与有序大孔材料独特的有序开孔结构相结合,在制备的三维有序大孔二氧化硅（3DOM SiO₂）孔壁上可控接枝带有功能基团的聚合物链段,制备3DOM杂化材料。采用表面引发原子转移自由基（SI-ATRP）接枝技术在3DOM SiO₂孔壁上可控接枝聚甲基丙烯酸缩水甘油酯（PGMA）链段,讨论了接枝条件对接枝量及接枝链段分子量的影响,并利用FT-IR、SEM、TGA、GPC等对接枝过程进行了表征。PGMA接枝链段上环氧基团可进一步与亲核试剂（二乙醇胺,浓硫酸和二乙烯三胺）发生开环反应,得到一系列带有不同官能团的具有较高接枝密度的功能杂化多孔材料,同时,利用该种材料对水中的水杨酸进行了吸附实验,吸附结果表明经二乙烯三胺开环后得到的功能化多孔材料对水杨酸具有很高的吸附量。本研究对于发展新型杂化多孔材料提供了新的方法。     

A successive route to amphiphilic graft copolymers with a hydrophilic poly(3‐hydroxypropyl methacrylate) backbone and hydrophobic polystyrene side chains

A successive method for preparing novel amphiphilic graft copolymers with a hydrophilic backbone and hydrophobic side chains was developed. An anionic copolymerization of two bifunctional monomers, namely, allyl methacrylate (AMA) and a small amount of glycidyl methacrylate (GMA), was carried out in tetrahydrofuran (THF) with 1,1‐diphenylhexyllithium (DPHL) as the initiator in the presence of LiCl ([LiCl]/[DPHL]₀ = 2), at −50 °C. The copolymer poly(AMA‐co‐GMA) thus obtained possessed a controlled molecular weight and a narrow molecular weight distribution (M_w /M_n = 1.08–1.17). Without termination and polymer separation, a coupling reaction between the epoxy groups of this copolymer and anionic living polystyrene [poly(St)] at −40 °C generated a graft copolymer with a poly(AMA‐co‐GMA) backbone and poly(St) side chains. This graft copolymer was free of its precursors, and its molecular weight as well as its composition could be well controlled. To the completed coupling reaction solution, a THF solution of 9‐borabicyclo[3.3.1]nonane was added, and this was followed by the addition of sodium hydroxide and hydrogen peroxide. This hydroboration changed the AMA units of the backbone to 3‐hydroxypropyl methacrylate, and an amphiphilic graft copolymer with a hydrophilic poly(3‐hydroxypropyl methacrylate) backbone and hydrophobic poly(St) side chains was obtained. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 1195–1202, 2000     

A 228Ra-212Pb tandem generator for potential application in biomedical studies

A new tandem generator system (cation-exchange generator column coupled to anion-exchange), based on the ²²⁸Ra as starting radionuclide, for ²¹²Pb/²¹²Bi production in the solutions suitable to direct application in biomedical investigations has been developed. Optimum conditions have been found for retention of Ra, Th and Ac parent radionuclides on the cation-exchange column and repeated elution of Pb with subsequent concentration on anion-exchange column using HBr and mixed HBr/CH₃OH solutions. It was shown that Pb/Bi could be eluted from anion — exchange column with a small volume of EDTA, DTPA, NaCl solutions or heated H₂O. The advantages of the tandem generator system for production of short-lived Pb/Bi radionuclides and their application for biomedical studies are discussed.     

Bis­(pentane‐1,5‐di­ammonium) deca­iodo­triplumbate(II)

The title compound, {(NH₃C₅H₁₀NH₃)₂[Pb₃I₁₀]}_n, crystallizes as an organic–inorganic hybrid. As such, the structure consists of extended chains of [Pb₃I₁₀]_n⁴ⁿ⁻ ions extending along [111]. The asymmetric unit contains two independent Pb atoms: one is in a general position and the other is on an inversion centre. Each Pb atom is octahedrally coordinated by six iodide ions and exhibits both face‐ and edge‐sharing with adjacent atoms in the inorganic chain. The organic counter‐ion, viz. pentane‐1,5‐di­ammonium, lies in channels formed by the chains and interacts with these chains via N—H⋯I hydrogen bonding.     

A One‐dimensional Lead(II) Coordination Polymer with Bridging Saccharinate and 2‐Aminomethylpyridine Ligands: Synthesis,IR Spectra,and Crystal Structure of [Pb(ampy)(μ‐sac)2]n

A complex with eight‐coordinate lead(II ) atom and saccharinate (sac) and 2‐aminomethylpyridine ligands was characterized by IR, elemental analysis and X‐ray crystallography. The lead(II ) complex crystallizes in the monoclinic crystal system with space group P2₁/c. The single crystal X‐ray analysis shows that the complex is a coordination polymer, [Pb(ampy)(μ‐sac)₂]_n, in which the lead(II ) ions have a highly distorted bicapped trigonal antiprism coordination. Lead(II ) ions are bridged by carboxyl groups of sac forming one‐dimensional linear chains, running parallel to the a axis. The intrachain Pb···Pb distances are 4.4490(3) and 4.4679(3)Å. The individual chains are connected by N—H···O_sulfonyl and C_ampy—H···O_sulfonyl type hydrogen bonds, resulting in a three‐dimensional network. The sac ligand acts as bidentate and bridging ligand, while ampy behaves as an N, N′ donor. The IR spectra of the lead(II ) complex are discussed in detail.     

An Unusual Porous Metal–Organic Framework that Demonstrates the Highly Efficient Exchange of Metal Ions and the Reversible Adsorption of Iodine

An exceedingly rare porous metal–organic framework that is based on cadmium ions and multi carboxylate ligands, namely, Na_0.25[(CH₃)₂NH₂]_1.75[Cd(L)₂] ? x solvent ( 1 , H₂L=2‐hydroxymethyl‐4,6‐bi(2′‐methoxyl‐4′‐(2′′‐1′′‐carboxyl)‐ethlene)‐1,3,5‐mesitylene), has been successfully synthesized under solvothermal conditions. Compound 1 exhibits a 2D network that is constructed from left‐ and right‐handed helical chains. Furthermore, neighboring 2D layers are stacked to give a porous motif. Strikingly, compound 1 exhibits the highly efficient exchange of metal ions from the main framework components whilst maintaining the structural integrity and the crystallinity of the network. In addition, Compound 1 also shows outstanding performance in the reversible adsorption of iodine.     

Polymer Structure‐Guided Self‐Assisted Preparation of Poly(ester‐thioether)‐Based Hollow Porous Microspheres and Hierarchically Interconnected Microcages for Drug Release

Porous polymer microspheres (PPMs) have been widely applied in various biomedical fields. Herein, the self‐assisted preparation of poly(ester‐thioether)‐based porous microspheres and hierarchical microcages, whose pore sizes can be controlled by varying the polymer structures, is reported. Poly(ester‐thioether)s with alkyl side chains (carbon atom numbers were 2, 4, and 8) can generate hollow porous microspheres; the longer alkyl chain length, the larger pore size of microspheres. The allyl‐modified poly(ester‐thioether) (PHBDT‐g‐C₃) can form highly open, hierarchically interconnected microcages. A formation mechanism of these PPMs is proposed; the hydrophobic side chains‐mediated stabilization of oil droplets dictate the droplet aggregation and following solvent evaporation, which is the key to the formation of PPMs. The hierarchically interconnected microcages of PHBDT‐g‐C₃ are due to the partially crosslinking of polymers. Pore sizes of PPMs can be further tuned by a simple mixing strategy of poly(ester‐thioether)s with different pore‐forming abilities. The potential application of these PPMs as H₂O₂‐responsive vehicles for delivery of hydrophobic (Nile Red) and hydrophilic (doxorubicin hydrochloride) cargos is also investigated. The microspheres with larger pore sizes show faster in vitro drug release. The poly(ester‐thioether)‐based polymer microspheres can open a new avenue for the design of PPMs and provide a H₂O₂‐responsive drug delivery platform.     

Polycaprolactone membranes reinforced by toughened sol–gel produced silica networks

The aim of this work is to develop polycaprolactone based porous materials with improved mechanical performance to be used in bone repair. The hybrid membranes consist in a polymeric porous material in which the pore walls are coated by a silica thin layer. Silica coating increases membrane stiffness with respect to pure polymer but in addition filling the pores of the polymer with a silica phase improves bioactivity due to the delivery of silica ions in the neighborhood of the material in vivo. Nevertheless silica network, even that produced by sol–gel, might be too stiff and brittle what is not desirable for its performance as a coating. In this work we produced a toughened silica coating adding chitosan and 3-glycidoxypropyltrimethoxysilane (GPTMS) to the precursor solution looking for having polymer chains linked by covalent bonding to the silica network. Hybrid polymer–silica coating was produced by in situ sol–gel reaction using Tetraethyl orthosilicate (TEOS), GPTMS and chitosan. Chemical reaction between amine groups of chitosan chains and epoxy groups of GPTMS allowed covalent bonding of polymer chains to the silica network. Physical properties of the hybrid membranes were characterized and cell attachment of MC3T3-E1 pre-osteoblastic cells on the surface of these supports was assessed.     

多孔氧化物块体材料的制备及其对重金属离子吸附研究进展

目前去除重金属离子的方法较多,其中吸附法因操作简单、经济性好而被广泛使用。多孔氧化物块体材料作为新兴的吸附材料具有比表面积高、机械强度高及可回收性好等特点,但吸附选择性差以及孔结构单一的缺陷限制了其在水体重金属处理中的应用。本文详细叙述了多孔氧化物块体材料的多种制备方法,并分别讨论了各方法的优势及其不足。介绍了近几年研究较多的多孔氧化物块体材料及其制备方法与特性。最后,对多孔氧化物块体材料对Pb、Cd及Cr等重金属离子吸附性能的影响因素及改善措施方面进行了总结分析,并指出多种材料的复合、材料表面的接枝改性及分级多孔结构的构建会增强对重金属离子的吸附性能。期望本文为多孔氧化物块体材料的制备及其在重金属离子吸附方面的应用提供参考。     

Column preconcentration of lead in aqueous solution with macroporous epoxy resin-based polymer monolithic matrix

The objective of this article was to investigate the feasibility of epoxy resin-based monoliths prepared by stepwise polymerization and column preconcentration of metal ions using large-scale monolithic matrix. A novel macroporous polymer monolith matrix was prepared from epoxy resin (EP) and ethylenediamine (EDA) and pore-forming reagent (polyethylene glycol, PEG-1000) by in situ step-addition polymerization. The morphology of the resulting polymer monolith was characterized by scanning electron microscopy (SEM). A solid-phase extraction (SPE) cartridge prepared from a simple glass-tube was used for the preconcentration and determination of Pb(II) combined with flame atomic absorption spectroscopy (FAAS). The characteristics of the monoliths for the extraction of Pb(II) in aqueous solution were investigated. The experimental results showed that trace Pb(II) ions could be quantitatively preconcentrated in the pH range of 4.0-9.0 with recoveries of >95%. The maximum static adsorption capacity of the monolith adsorbent was 106.8 mg g⁻¹. The column was eluted by 1.0 mol L⁻¹ HNO₃ and recovery of Pb(II) was more than 97%. Moreover, the polymer monolith adsorbent shows superior reusability and stability. The precision and the accuracy of the proposed procedure were satisfactory by analyzing a standard reference material and three natural water samples. It was shown that the EP-EDA monolith was suitable for the preconcentration of environmental Pb(II) as an ion-selective SPE adsorbent.     

Electrochemical Detection of Pb(II) by Glassy Carbon Electrode Modified with Amine-Functionalized Magnetite Nanoparticles

An amine-Fe₃O₄ modified glassy carbon (GC) electrode was constructed for detecting Pb(II) ions in wastewater. The electrode was characterized by cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). Square wave anodic stripping voltammetry (SWASV) was used to detect the Pb(II), and the detection limit of Pb(II) was 0.15 µM. The sensitivity of the electrode to detect Pb(II) was about 10.07 µA/µM, with a correlation coefficient of 0.991, which was approximately 10 times bigger than that of a pure Fe₃O₄ modified electrode. The electrode also showed good selectivity and stability. This results indicated that the amine-magnetite material could have some potential applications in heavy metal ions detection in wastewater.     

High-performance collection of palladium ions in acidic media using nucleic-acid-base-immobilized porous hollow-fiber membranes

We prepared nucleic-acid-base-immobilized porous membranes of a hollow-fiber form with pore size, porosity, and thickness of 0.2 μm, 70%, and approximately 0.7 mm, respectively. Glycidyl methacrylate was graft-polymerized onto a polyethylene-made porous hollow-fiber membrane, followed by ring-opening of the epoxy group with the amino groups of adenine, guanine, and cytosine. The collection of palladium ions was achievable during the permeation of palladium chloride solution through the adenine-immobilized porous hollow-fiber membrane. The diffusional mass-transfer resistance of palladium ion to immobilized adenine was negligible because palladium ion was transported by permeative flow through the pores. The adenine-immobilized porous membrane with an immobilization density of 0.85 mol/kg of the membrane exhibited the highest molar binding ratio of palladium ion to immobilized adenine of 0.31 in 1 M hydrochloric acid. In addition, a quantitative elution with 4 M hydrochloric acid was experimentally demonstrated.     

Porous alginate-Ca hydrogels interpenetrated with PNIPAAm networks: Interrelationship between compressive stress and pore morphology

Thermo-sensitive porous hydrogels composed of interpenetrated networks (IPN) of alginate-Ca²⁺ and PNIPAAm have been obtained. The hydrogels were prepared by cross-linking alginate-Na⁺ with Ca²⁺ ions inside PNIPAAm networks. Compressive tests and scanning electron microscopy were used to evaluate gel strength and pore morphology, respectively. IPN hydrogels displayed two distinct pore morphologies under thermal stimuli. Below 30-35 °C, the LCST of PNIPAAm in water, IPN hydrogels were highly porous. The pore size of hydrogel heated above LCST became progressively smaller. Alginate-Ca²⁺ and PNIPAAm hydrogels, used as references, did not present such behaviour, indicating that the porous effect is due to IPN hydrogel. It was verified that higher strength is achieved when the hydrogel presents small pore size and the temperature is increased. It is suggested that at temperatures above LCST, the PNIPAAm chains shrink and pull the alginate-Ca²⁺ networks back. During shrinking, the polymer chains occupy the open spaces (pores from which water is expelled), and therefore, the hydrogel becomes less deformable when subjected to compressive stress. The results presented in this work indicate that the mechanical properties as well as the pore morphologies of these IPN hydrogels can be tailored by thermal stimulus.     

Repeated use of a hydrophobic ligand-containing porous membrane for protein recovery

A porous hollow-fiber membrane containing a phenyl group as a hydrophobic ligand was prepared by radiation-induced graft polymerization of glycidyl methacrylate, followed by successive ring-opening reactions with phenol and water. Bovine serum albumin (BSA) was bound to the ligand during permeation of a BSA solution in phosphate buffer containing 2M (NH₄)₂SO₄ through the pores of the hollow fiber. Subsequent elution with an (NH₄)₂SO₄-free buffer exhibited an elution percentage of 82%. Repeated cycles of adsorption and elution caused the accumulation of BSA on the pore surface, resulting in a decrease in the binding capacity of BSA with increasing number of cycles. In contrast, by permeating 1 M NaOH after each elution, the binding capacity of BSA was maintained even after ten cycles. This alkaline regeneration was found to be effective in ensuring repeated use of the phenyl-group-containing porous membrane for recovery of proteins.     

Hierarchically structured β-Ni(OH)2 clusters: a uniquely efficient aqueous phase pollutant adsorbent for multiple anionic dyes and heavy metal ions

Herein, for the first time mesostructured 3D self-assembled β-Ni(OH)₂ clusters with high surface area, large pore size, and uniform flower-like morphology have been synthesized by implementing a novel microwave heating method, using glycine as the cappant. The β-Ni(OH)₂ clusters are subjected to aqueous phase pollutant adsorption for multiple anionic dyes [congo red (CR), acid fuchsin (AF) and acid red 27 (AR-27)], and heavy metal ions [divalent lead ion, Pb(II) and divalent cadmium ion, Cd(II)]. The comprehensive kinetic analyses show that the adsorption of dyes and metal ions on the β-Ni(OH)₂ cluster surface occurs by chemisorption (pseudo-second order kinetics) and intraparticle diffusion (film and pore diffusion) processes. Further, the β-Ni(OH)₂ clusters show excellent equilibrium adsorption capacity for all the anionic dyes and metal ions. The equilibrium isotherm data show homogenous distribution of CR and AF dyes, and heterogeneous distribution of AR-27 dye on the β-Ni(OH)₂ surface. The excellent adsorption efficiency is attributed to the microwave-induced highly hydroxylated rippled 2D surface, open pore architecture, and suitable pore distribution of the β-Ni(OH)₂ clusters, which collectively cause strong hydrogen bonding between the cluster surface and anionic dyes as well as metal ions.     

Cation-exchange studies of yttrium(III) and its separation from various other elements

Summary Systematic studies are presented on the cation-exchange behaviour of yttrium on Dowex 50W-X8. HCl, HNO₃, H₂SO₄, NH₄Cl, NH₄NO₃, (NH₄)₂SO₄, CH₃COONH₄, NaCl, NaNO₃, malonic acid, tartaric acid and EDTA were used as eluting agents. Y was separated from a large variety of elements by selective elution or selective adsorption. Thus it was possible to separate it from many common ions such as alkalis, alkaline earths, Bi, Hg, V, Cd, U, In, Co, Ga, Zn, Sc, Fe, Al, Ni, and Ce by selective elution. It was separated from Ti, Zr, Hf, and Sb by selective sorption in citrate media and from Cr, Tl, Pb, and Th by gradient elution.