铕-结晶紫缔合物分光光度法测定痕量铕

在碱性(pH10.10)条件下,铕(Ⅲ)与结晶紫形成缔合物,表观摩尔系数为=1.8×105L/(mol.cm),铕的浓度在0.15~1.2mg/l范围内遵守比耳定律,组成摩尔比为Eu∶CV=1∶2.     

Resonance Rayleigh scattering method for the determination of trace amounts of cadmium with iodide-basic triphenylmethane dye systems

In dilute phosphoric acid solution, cadmium (II) reacts with a large excess of I^– to form [CdI₄]^2– which reacts further with basic triphenylmethane dyes such as crystal violet (CV), ethyl violet (EV), methyl violet (MV), brilliant green (BG) or malachite green (MG) to form an ion-association complex. This results in a significant enhancement of resonance Rayleigh scattering (RRS) intensity and the appearance of new RRS spectra. The characteristics of RRS spectra of the ion-association complexes, the influencing factors and the optimum conditions of these reactions have been investigated. The intensity of RRS is directly proportional to the concentration of cadmium from ¶0 to 60 ng mL^–1 for EV and MV systems, 0 to 80 ng mL^–1 for CV system, and 0 to 100 ng mL^–1 for BG and MG systems. The methods exhibit high sensitivities and the detection limits for cadmium are between 0.35 and 2.00 ng mL^–1 depending on the different reaction systems. The new RRS method was applied to the direct determination of traces of cadmium in pure zinc and synthetic water samples.     

A Surface Enhanced Raman Scattering (SERS) microdroplet detector for trace levels of crystal violet

We report on a microfluidic platform that integrates a winding microdroplet chip and a surface-enhanced Raman scattering (SERS) detection system for trace determination of crystal violet (CV). Colloidal silver was applied to generate SERS. Compared to the continuous flow microfluidic system, the microdroplet based detection described here effectively eliminates any memory effects. Effects of flow pattern, droplet size, surfactant, and position of detection were optimized. Under optimal conditions, there is a linear correlation between signal and the concentration of CV in the 10 nM to 800 nM range, with a correlation coefficient (R²) of 0.9967. The limit of detection in water is 3.6 nM.

Monoclonal antibody-based enzyme-linked immunosorbent assay for detection of total malachite green and crystal violet residues in fishery products

A rapid easy-to-use trace level direct competitive enzyme-linked immunosorbent assay (dc-ELISA) detection of total residual malachite green (MG), crystal violet (CV) and their corresponding primary metabolites leucomalachite green (LMG) and leucocrystal violet (LCV) in fishery products in a single assay was developed. The monoclonal antibodies, anti-MG and anti-CV mAbs, were prepared using carboxyl-malachite green (CMG) and cationized bovine serum albumin (cBSA) conjugates as immunogen. The linear range for the quantitative detection of total MG, CV and their primary metabolites LMG and LCV was between 0.15 to 4.5?ng?mL^?1 with a half maximal inhibitory concentration (IC₅₀) at 0.56?±?0.04?ng?mL^?1 (n?=?5). The anti-MG mAbs exhibited 98% cross-reactivity to CV, less than 0.1% cross-reactivity with LMG and LCV, and no cross-reactivity with chloramphenicol, enrofloxacin, sulfadiazine, and tetracycline. Application of the dc-ELISA in fish tissue samples gave a limit of detection (LOD) of 0.37?ng?g^?1. The improved total detection lead to a recovery of 74.60?±?8.38% at 0.5?ng?g^?1 and 87.47?±?12.83% at 2.0?ng?g^?1 that was better than existing techniques. The dc-ELISA showed total MG in 7 out of 44 field fish samples that were confirmed with LC-MS/MS. The easy-to-use, inexpensive, and rapid dc-ELISA for the detection of total MG, CV and their corresponding primary metabolites holds promise for field applications.     

Enthalpies of adsorption of methylene blue and crystal violet to montmorillonite

Calorimetric measurements of the enthalpy of adsorption on montmorillonite indicate different patterns for methylene blue (MB) and crystal violet (CV). The enthalpy of adsorption of MB is endothermic up to 73% of the cation exchange capacity (CEC) (i.e., about 0.6 mmol g^-1 clay), whereas at higher adsorption ratios the adsorption reaction becomes exothermic. The enthalpy of adsorption of CV is exothermic for all amounts adsorbed. These results were confirmed with adsorption experiments that prove that adsorption of MB increase with temperature, whereas CV adsorption decreases. This behavior indicates changes in the equilibrium coefficient according to Van't Hoff's equation. This revised version was published online in July 2006 with corrections to the Cover Date.     

Adsorption of crystal violet dye from aqueous solution using mesoporous materials synthesized at room temperature

In this work, batch adsorption experiments are carried out for crystal violet dye using mesoporous MCM-41 synthesized at room temperature and sulfate modified MCM-41 prepared by impregnation method using H₂SO₄ as sulfatising agent. The surface characteristics, pore structure, bonding behavior and thermal degradation of both the MCM-41 samples are characterized by nitrogen adsorption/desorption isotherms, X-ray diffraction (XRD) patterns, Fourier transform infrared (FT-IR) spectroscopy and thermo gravimetric analysis (TGA). The adsorption isotherm, kinetics and thermodynamic parameters are investigated for crystal violet (CV) dye using the calcined and sulfated MCM-41. Results are analysed using Langmuir, Freundlich and Redlich-Peterson isotherm models. It is found that the Freundlich model is an appropriate model to explain the adsorption isotherm. The highest adsorption capacity achieved is found to be 3.4×10⁻⁴ mol g⁻¹ for the sulfated MCM-41. The percentage removal of crystal violet dye increases with increase in the pH for both the MCM-41 adsorbents. Kinetics of adsorption is found to follow the second-order rate equation. From the thermodynamic investigation, it is evident that the adsorption is exothermic in nature.     

Development of a Simple and Inexpensive Optical Absorption One‐Shot Sensor Membrane for Detection and Determination of Cyanide Ions in Water Samples

A new one‐shot optical cyanide ion sensor is proposed for determination of cyanide ions. The sensor was constructed by immobilizing crystal violet (CV) on triacetylcellulose membrane. The sensing mechanism involves reaction between cyanide ions and the immobilized CV at pH = 5.4, which results in a decrease in absorbance of the membrane at 600 nm. The sensor shows sufficient repeatability, reproducibility, operational lifetime of 3 weeks, and a response of less then 10 min under the optimum conditions and response time of 8 min. Cyanide can be determined in the concentration range of 50.0‐800 μg mL^‐1 with a detection limit of 5.0 μg mL^‐1. Most ions do not interfere with the determination of cyanide ions. The proposed sensor was successfully applied to the determination of cyanide in spiked water samples.     

Circular dichroic and spectrophotometric probes of the competitive binding of crystal violet between DNA and other anionic polymers

Of the two synthetic polyanions poly-(styrene sulfonate) (PSS) and poly-(vinyl sulfate) (PVS), the latter induces sharper metachromasia in the cationic dye crystal violet (CV); DNA, however, fails to induce metachromasia in the dye. Contrary to speculation, DNA binds CV, though a nonintercalating dye, rather strongly and holds a portion of the dye even in the presence of PSS or PVS, which induces strong metachromasia. Induced circular dichroism (ICD) in CV by DNA shows that DNA binds CV, and partial reduction of ellipticity of DNA-CV by PVS shows that CV distributes itself between the two polyanions. DNA is shown to be the winner in the competitive binding of CV even with the strong polyanion heparin (Hep) as the competitor. This has been interpreted as being due to the binding of CV to DNA, primarily by ionic attraction stabilized further by nonionic forces like H-bonding in the grooves of DNA. Quantitative estimations of the association constants of DNA-CV and PVS-CV by Scatchard plot come to 0.74 × 10⁶ and 1.28 × 10⁶ mol⁻¹, respectively.     

Catalytic action of CTAB/KBr/C9OH micellar media on the basic hydrolysis of crystal violet

The kinetics of basic hydrolysis of crystal violet (CV) in CTAB/KBr/C₉OH micellar media was investigated under pseudo-first-order conditions. The reaction was monitored spectrophotometrically by measuring the decrease in absorbance of CV at 590?nm. It was observed that the pseudo-first-order rate constant increases with increase in C₀. The enhancement of reaction rate with C₀ is explained on the basis of dependence of reaction rate on micellar morphology. Further, the viscosity and DLS analysis supports nonanol-induced morphological transitions. Fluorescence spectroscopy has been used to understand dye–micelles interactions. The enhancement of fluorescence intensity of CV with C₀ suggests an increase in dye–micelles interaction with C_0. The concentration of surfactant and salt had a marked effect on reaction rate. The inhibition of reaction rate at high concentration of surfactant and salt is due to the ionic competition of OH^? and Br^? ions for the reaction center. The influence of [OH^?] on CV hydrolysis was also investigated. The results show that the pseudo-first-order rate constant, k’, increases linearly with hydroxide ion concentration, indicating first-order dependence on [OH^?].     

Determination of cationic polyelectrolytes using a photometric titration with crystal violet as a color indicator

The reaction of the cationic dye, crystal violet (CV) with the anionic polyelectrolytes such as potassium poly (vinyl sulfate) (PVSK) results in a decrease of the absorbance of CV at the maximum absorption wavelength (590 nm). This change of the absorption spectra of the CV has been already applied to the determination of anionic polyelectrolytes using flow injection analysis method. In this paper, CV was applied to the indicator for the determination of cationic polyelectrolytes such as poly (diallyldimethylammonium chloride) (Cat-floc) by photometric titration, using a PVSK solution as a titrant. The end-point of the titration is detected as the break point of the titration curve. A linear relationship between the concentration of cationic polyelectrolyte and the end-point volume of the titrant exists in the concentration range from 0 to 5×10⁻⁵ eq. mol dm⁻³ for Cat-floc, glycol chitosan and methylglycol chitosan. The effects of the concentration of CV and coexisting electrolytes in the sample solution and the effect of pH of the sample solution on the degree of the change of absorbance at the end-point were also examined.     

用结晶紫为荧光指示剂筛选G-四链体的小分子配体

基于结晶紫(CV)与G-四链体的特异性结合以及结晶紫和端粒DNA(G-DNA)、G-四链体作用后荧光强度的差异,以天然抗肿瘤中药槲皮素为研究对象,建立了一种简单、快速、无标记筛选G-四链体配体的方法。研究了槲皮素与G-DNA的相互作用,并考察了G-DNA在K+存在下形成G-四链体后与槲皮素的作用情况。该方法已用于筛选G-四链体的小分子配体。     

Determination of crystal violet in seawater and seafood samples through off‐line molecularly imprinted SPE followed by HPLC with diode‐array detection

A highly selective sample cleanup procedure combined with molecularly imprinted SPE was developed for the isolation of crystal violet from seawater and seafood samples. The molecularly imprinted polymer was prepared using crystal violet as the template molecule, methacrylic acid as the functional monomer, and ethylene glycol dimethacrylate as the cross‐linker. The crystal violet‐imprinted polymer was used as the selective sorbent for the SPE of crystal violet. An off‐line molecularly imprinted SPE method followed by HPLC with diode‐array detection for the analysis of crystal violet was also established. Good linearity on the molecularly imprinted SPE columns was obtained from 0 to 200 μg/L (R² > 0.99). The result demonstrated that the proposed method can be used for the direct determination of crystal violet in seawater and seafood samples. Finally, five samples were analyzed and the following crystal violet concentrations were obtained: 0.92 and 0.52 μg/L in two seawater samples, as well as 0.36 and 0.27 μg/kg in two seafood samples. There is no crystal violet detected in the third seawater sample.     

GO/Fe3O4/有机胺复合材料的制备及对结晶紫染料的吸附性能

用改进的Hummers法制备了氧化石墨烯,用乙二胺、乙二胺与丁二胺/己二胺混溶来改性氧化石墨烯。用水热法制备了Fe3O4,并用物理混合法制备了GO/Fe3O4/有机胺的三元复合体系。用透射电镜、扫描电镜、红外光谱、热重分析、X射线衍射、VSM和XPS等对所制得的样品进行了结构表征和性能测试,研究了三元复合粒子对结晶紫染料的吸附性能及影响结晶紫染料吸附效果的因素。结果表明:所制备的Fe3O4的平均粒径约为200 nm,粒径分布均匀;复合物中GO为典型的片状结构,GO及有机胺的掺杂没有影响Fe3O4的尖晶石结构;复合物为超顺磁性,Ms为53.0 emu·g~(-1)。吸附结果表明:石墨烯/Fe3O4/有机胺的三元复合材料对结晶紫染料的最大吸附量随浓度增大而增大,而吸附结晶紫染料的移除率却随结晶紫染料浓度增大而减小,并趋向一定值;乙二胺和己二胺混溶比例为5∶1的GO/Fe3O4复合材料吸附性能最佳:结晶紫浓度为400 mg·L~(-1),最大吸附量为164.3 mg·L~(-1)。     

Application of ionic liquid‐based microwave‐assisted extraction of malachite green and crystal violet from water samples

A simple, environment friendly and efficient technique, ionic liquid‐based microwave‐assisted extraction was first used to determine malachite green and crystal violet (CV) from water samples coupled to HPLC. The key parameters influencing extraction efficiency were investigated, such as the type of ionic liquids, the volume of ionic liquid, extraction time, and so on. Under the optimum conditions, good reproducibility of the extraction performance was obtained (RSD, 1.0% for malachite green (MG) and 5.9% for CV, n = 5). Good linearity (0.10–25 μg L^?1) was observed with correlation coefficients between 0.9991 and 0.9964. The detection limits of MG and CV were 0.080 and 0.030 μg L^?1, respectively. The proposed method had been successfully applied to determine MG and CV in real water samples with recoveries ranging from 95.4 to 102.8%. Compared with the previous technologies, the proposed method required less extraction time (2 min), and provided lower detection limits and higher enrichment factors. Moreover, there were no volatile and hazardous organic solvents released. Based on these simple, environment friendly, rapid, and highly efficient results, the proposed approach provides a new and promising alternative for simultaneously extracting trace amounts of MG and CV from water.     

Salt-Assisted Graphene Oxide Dispersive Solid Phase Microextraction for Sensitive Detection of Malachite Green and Crystal Violet by HPLC

In this study, an efficient sample pretreatment method, salt-assisted graphene oxide dispersive solid phase microextraction (SA-GO-DSPME), was established for extraction of malachite green (MG) and crystal violet (CV). The dispersive graphene oxide was found to be easily aggregated and completely centrifuged in the presence of NaCl. The adsorption kinetic of SA-GO-DSPME was shown to be quite fast (equilibrium time = 5 min). Key parameters that influenced extraction efficiency including sample pH, the eluent type, GO amount, extraction time, NaCl concentration and centrifuging time were investigated. Coupled with SA-GO-DSPME, high-performance liquid chromatography (HPLC) could be used for sensitive detection of MG and CV with detection limits down to 1.7 and 0.3 ng mL⁻¹ for MG and CV, respectively. The relative standard deviations for extraction reproducibility (n = 5) were 1.8 % for MG and 3.8 % for CV. The proposed method has been successfully applied for detection of MG and CV in real water samples, and the recoveries ranged from 89.7 to 116.4 %. This simple and fast extraction method may provide a promising alternative for extraction of trace amount of MG and CV in complicated samples.

     

Study of the concentration and separation of cadmium with microcrystalline phenolphthalein modified by crystal violet

A new method for cadmium separation and concentration with microcrystalline phenolphthalein modified by crystal violet (CV) was developed in the paper. In the presence of potassium iodide (KI) and CV, cadmium are quantitatively absorbed on microcrystalline phenolphthalein in the pH range 1.0-6.0 as the forms of water-insoluble ion-associated complexes (CdI₃⁻)·(CV⁺) and (CdI₄²⁻)·(CV⁺)₂. Effect of different parameters such as phenolphthalein amount, stirring time, the concentration of CV and KI, various salts and metal ions was studied in detail. During the present study, a significant enhancement of the extraction of cadmium was observed. Cd(II) can be completely separated from Zn(II), Fe(II), Co(II), Ni(II), Mn(II), Cr(III) and Al(III) in this microcrystalline system and well concentrated without the interference of these metal ions at high level. The possible reactive mechanism of cadmium concentration has been discussed. Analytical results obtained by this new method were very gratifying.     

Adsorption of Procion Red MX‐5B and Crystal Violet Dyes from Aqueous Solution onto Corncob Activated Carbon

Textile and dyeing industries are considered as one of the main water utilizing industries and generate a huge amount of colored liquid effluents in their finishing and dyeing processes. In this paper, agricultural waste corncob has been chosen as a renewable source to produce activated carbon at 400 °C (corncob activated carbon, CCAC) for the removal of Procion Red MX‐5B (PR) and crystal violet (CV) from dye‐polluted effluent using a batch technique. The efficiency of CCAC in adsorbing CV and PR from the water has been carried out as a function of pH, adsorbent dose, contact time, agitation, and initial concentration. The Temkin, Langmuir, and Freundlich isotherm model equations were investigated to understand the adsorption mechanism of dye molecules. The Langmuir isotherm R² obtained was 0.9958 for CV and 0.9733 for PR. Maximum adsorption capacity obtained was 2.498 mg/g for CV and 2.86 mg/g for PR. Moreover, a pseudo‐second‐order kinetic equation with R² value of 0.9999 was found in this adsorption process. To identify the chemical and morphological characteristics and surface functional groups, nanocomposite of CCAC was characterized using field emission scanning electron microscopy and Fourier‐transform infrared spectrophotometry. The obtained results indicate that the prepared CCAC can be used as a promising low‐cost dye (CV and PR) removing adsorbent from aqueous solutions.     

Magnetic solid-phase extraction based on Fe3O4/graphene oxide nanoparticles for the determination of malachite green and crystal violet in environmental water samples by HPLC

This work describes a magnetic Fe₃O₄/graphene oxide (GO)-based solid-phase extraction (MSPE) technique for high performance liquid chromatography (HPLC) detection of malachite green (MG) and crystal violet (CV) in environmental water samples. Fe₃O₄/ GO magnetic nanoparticles were synthesised by a chemical co-precipitation method and characterised by scanning electron micrograph, transmission electron microscope, Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy and surface area analyser. The prepared Fe₃O₄/GO magnetic nanoparticles were used as the adsorbents of MSPE for MG and CV. By coupling with HPLC, a sensitive and cost-effective method for simultaneous determination of MG and CV was developed. The important parameters including the amount of Fe₃O₄/GO, pH of the sample solution, extraction time, salt effect, the type and volume of desorption solvent were investigated in detail. Under optimised conditions, the calibration curves were linear in the concentration range of 0.5–200 μg L^?1, and the limits of detection were 0.091 and 0.12 μg L^?1 for MG and CV, respectively. Finally, the established MSPE-HPLC method was successfully applied to determine MG and CV in environmental water samples with the recoveries ranging from 91.5% to116.7%.     

UV–vis,IR and 1H NMR spectroscopic studies and characterization of ionic-pair crystal violet–oxytetracycline

The present study shows the formation and characterization of the ionic-pair between the antibiotic oxytetracycline and the dye crystal violet in ammonia solution pH 9.0 ± 0.2 extracted into chloroform. The characterization was demonstrated using UV–vis spectrophotometry, ¹H NMR, measurement of relaxation times T₁ and IR spectroscopy, using a comparison between the signals of individual pure compounds with the signals with the mixture CV–OTC in different alkaline media. The formation of ionic-pair was also corroborated by new signals and chemical shifts. (2D) NMR spectroscopy experiments show that the interaction is electrostatic.     

Microemulsions as a medium in chemical kinetics,II. The I− + S2O8= and crystal Violet + OH− reactions in different surfactant/oil/water microemulsions

A kinetic study of the reactions I^? + S₂O₈⁼ and CV⁺ + OH^? (CV = 4, 4′, 4″-tris(dimethylamino)triphenylmethyl chloride or crystal violet) in different water in oil microemulsions is reported. The dependence of the rate constants on the nature of the surfactant as well as on the molar ratio R = [H₂O]/[Surfactant] has been investigated. The results are interpreted on the basis of the electrostatic interactions between the reactants and the surfactant polar heads and considering the water properties inside the aqueous core of the droplets.