Study on Synthesis,Characteristics and Catalysis Properties of Novel Chiral Metal Complexes Catalysts for 1,3‐Dipolar Cycloaddition Reactions of Nitrone with Electron‐Rich Alkene

As a new class of potential catalysts for 1,3‐dipolar cycloaddition reactions, fourteen L‐amino acid Schiff base Cu(II) and Ti(IV) complexes were synthesized, characterized, and evaluated for their catalytic activities in the reaction between C,N‐diphenylnitrone and electron‐rich ethyl vinyl ether under both homogeneous and in situ conditions. The methods for preparation and utilization of the catalysts were elucidated in detail, and the results of the catalytic reactions were described and discussed as well. Excellent reaction results were found in the presence of some catalysts (20 mol%) with > 90% endo‐isoazolidines produced, compared with predominantly exo‐isoazolidine produced without a catalyst. In addition, the reaction rate is found to be enhanced remarkably by a Cu(II) complex Schiff base catalyst at room temperature.     

Synthesis of multifunctional polymer containing Ni‐Pd NPs via thiol‐ene reaction for one‐pot cascade reactions

Recently, acid–base bifunctional catalysts have been considered due to their abilities, such as the simultaneous activation of electrophilic and nucleophilic species and their high importance in organic syntheses. However, the synthesis of acid–base catalysts is problematic due to the neutralization of acidic and basic groups. This work reports a facial approach to solve this problem via the synthesis of a novel bifunctional polymer using inexpensive materials and easy methods. In this way, at the first step, heterogeneous poly (styrene sulfonic acid‐n‐vinylimidazole) containing pentaerythritol tetra‐(3‐mercaptopropionate) (PETMP) and trimethylolpropane trimethacrylate (TMPTMA) cross‐linkers were synthesized in the pores of a mesoporous silica structure using click reaction as a novel bifunctional acid–base catalyst. After that, Ni‐Pd nanoparticles supported on poly (styrenesulfonic acid‐n‐vinylimidazole)/KIT‐6 as a novel trifunctional heterogeneous acid–base‐metal catalyst was prepared. The prepared catalysts were characterized by various techniques like FT‐IR, TGA, ICP‐AES, DRS‐UV, TEM, FE‐SEM, EDS‐Mapping, and XRD. The synthesized catalysts were efficiently used as bifunctional/trifunctional catalysts for one‐pot, deacetalization‐Knoevenagel condensation and one‐pot, three‐step and a sequential reaction containing deacetalization‐Knoevenagel condensation‐reduction reaction. It is important to note that the synthesized catalyst showing high chemo‐selectivity for the reduction of nitro group, alkenyl double bond and ester group in the presence of nitrile. Moreover, it was found that the different nanoparticles including Ni, Pd, and alloyed Ni‐Pd showing different chemo‐selectivity and catalytic activity in the reaction.     

Synthesis,characterization, and catalytic activity of titanium iminophenoxide complexes in relation to the ring‐opening polymerization of L‐lactide and ε‐caprolactone

This study synthesized a series of titanium iminophenoxide complexes and investigated their suitability as catalysts for the ring‐opening polymerization of L ‐lactide (L ‐LA) and ε‐caprolactone (CL). Complexes with bidentate ligands demonstrate higher catalytic activity than their tridentate counterparts since the third coordination atom needs to contend with L ‐LA and CL. Differences in the geometric framework of bidentate ligands also influence the catalytic activity. Type II ligands (N, N‐trans form of Ti complex) prevent the coordination of monomers to Ti thereby decreasing the initiation rate. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

NHC‐Pd complex based on 1,3‐bis (4‐ethoxycarbonylphenyl) imidazolium chloride: synthesis,structure and catalytic activity in the synthesis of axially chiral benzophenone hydrazone

A novel NHC–Pd complex of 1,3‐bis (4‐ethoxycarbonylphenyl) imidazolium chloride has been synthesized and characterized by ¹H NMR, ¹³C NMR, IR and X‐ray single‐crystal diffraction studies. TG analysis shows that the NHC‐Pd complex is stable under 208 °C. The catalytic activities have been explored for the synthesis of axially chiral N‐(2′‐methoxy‐1,1′‐binaphthalen‐2‐yl) benzophenone hydrazone. The result indicates that the novel NHC‐Pd complex can achieve better catalytic activity than the Pd‐phosphine catalysts in the synthesis of axially chiral N‐(2′‐methoxy‐1,1′‐binaphthalen‐2‐yl) benzophenone hydrazone.     

New Chiral Ligand N—Toluenesulfony1—2,2‘—dimethoxy—6,6’—di—aminobiphenyl for Catalytic Asymmetric Transfer Hydrogenation of Ketones

A new chiral ligand N‐p‐toluenesulfonyl‐2,2′‐dimethoxy‐6,6′‐diaminobiphenyl (Ts‐DMBDPPA) was prepared from 2,2′‐dimethoxy‐6,6′‐diaminobiphenyl via N‐tosylation. Its Ru(II) complex was effective catalysts for catalytic asymmetric transfer hydrogenation of aromatic ketones (with ee's up to 69.3%).     

Liquid Phase Hydrogenation of t,t,c‐1,5,9‐Cyclododecatriene over Ni/MCM‐41 and Ni/SiO2 Catalysts

Ni‐loaded pure siliceous and aluminosilicate MCM‐41 (Ni/MCM‐41) and nickel‐loaded silica (15Ni/SiO₂) were synthesized via wet impregnation and were characterized by various techniques. The H₂ consumption in the TPR analysis was found to be proportional to the Ni amount in the calcined samples. After reduction the average Ni particle sizes of 15Ni/MCM‐41 and 15Ni/SiO₂ were 9–12 and 16 nm, respectively, by means of XRD and TEM measurements. All catalysts owned weak and intermediate Lewis acid sites that increased slightly with increasing the Ni amount and the Al content. In the liquid phase hydrogenation of t,t,c‐1,5,9‐cyclododecatriene over Ni/MCM‐41, the catalytic activity was parallel to the Ni content and enhanced slightly with the acid amount of the catalysts. Consequently, it was proposed that the Ni metallic sites contributed the major effect to the catalytic activity while the Lewis acid sites promoted a small but significant influence on the catalytic performance. It is noteworthy that all 15Ni/MCM‐41 catalysts exhibited remarkably higher activity than that of the conventional 15Ni/SiO₂ catalyst.     

One‐Pot,Three‐Component Synthesis of 1‐(2‐Hydroxyethyl)‐1H‐1,2,3‐triazole Derivatives by Copper‐Catalyzed 1,3‐Dipolar Cycloaddition of 2‐Azido Alcohols and Terminal Alkynes under Mild Conditions in Water

A safe, efficient, and improved procedure for the regioselective synthesis of 1‐(2‐hydroxyethyl)‐1H‐1,2,3‐triazole derivatives under ambient conditions is described. Terminal alkynes reacted with oxiranes and NaN₃ in the presence of a copper(I) catalyst, which is prepared by in situ reduction of the copper(II) complex 4 with ascorbic acid, in H₂O. The regioselective reactions exclusively gave the corresponding 1,4‐disubstituted 1H‐1,2,3‐triazoles in good to excellent yields. This procedure avoids the handling of organic azides as they are generated in situ, making this already powerful click process even more user‐friendly and safe. The remarkable features of this protocol are high yields, very short reaction times, a cleaner reaction profile in an environmentally benign solvent (H₂O), its straightforwardness, and the use of nontoxic catalysts. Furthermore, the catalyst could be recovered and recycled by simple filtration of the reaction mixture and reused for ten consecutive trials without significant loss of catalytic activity. No metal‐complex leaching was observed after the consecutive catalytic reactions.     

N,N,N′,N′‐Tetrabromobenzene‐1,3‐Disulfonamide and Poly(N‐Bromo‐N‐Ethyl‐Benzene‐1,3‐Disulfonamide) as Efficient Catalysts for the Methoxymethylation of Alcohols under Solvent‐Free Conditions

Methoxymethylation of a variety of alcohols was performed using formaldehyde dimethyl acetal in the presence of N,N,N′,N′‐tetrabromobenzene‐1,3‐disulfonamide [TBBDA] and poly(N‐bromo‐N‐ethylbenzene‐1,3‐disulfonamide) [PBBS] as catalysts at room temperature and solvent‐free conditions. The methoxymethyl ethers (MOM‐ethers) were obtained with good to excellent yields.     

Fabrication of Nitrogen‐Doped Mesoporous‐Carbon‐Coated Palladium Nanoparticles: An Intriguing Electrocatalyst for Methanol and Formic Acid Oxidation

Inspired by the attractive catalytic properties of palladium and the inert nature of carbon supports in catalysis, a concise and simple methodology for in situ nitrogen‐doped mesoporous‐carbon‐supported palladium nanoparticles (Pd/N‐C) has been developed by carbonizing a palladium dimethylglyoximate complex. The as‐synthesized Pd/N‐C has been exfoliated as a fuel cell catalyst by studying the electro‐oxidation of methanol and formic acid. The material synthesized at 400 °C,namely, Pd/N‐C‐400,exhibitssuperior mass activity and stability among catalysts synthesized under different carbonization temperaturesbetween300 and 500 °C. The unique 1D porous structure in Pd/N‐C‐400 helps better electron transport at the electrode surface, which eventually leads to about five times better catalytic activity and about two times higher stability than that of commercial Pd/C. Thus, our designed sacrificial metal–organic templatedirected pathway becomes a promising technique for Pd/N‐C synthesis with superior catalytic performances.     

Selective ethylene oligomerization with in‐situ‐generated chromium catalysts supported by trifluoromethyl‐containing ligands

A series of pyrrole‐containing diarylphosphine and diarylphosphine oxide ligands were prepared. The catalytic activity of the corresponding in‐situ‐generated chromium catalysts was investigated during selective ethylene oligomerization reactions. Variations in the ligand system were introduced by modifying the diarylphosphine and pyrrole moieties that affect the steric and electronic properties. Minor changes in the ligand structure and the composition of activators significantly changed the catalytic activity, selectivity toward linear alpha‐olefins (LAO) versus polyethylene (PE), and the distribution of oligomeric products. The presence of trifluoromethyl groups on the diphenyl rings in ligand 3 promoted oxidation to form the corresponding phosphine oxide structure, 3o , which dramatically enhanced the catalytic activity of ethylene trimerization. The in‐situ‐generated chromium complex based on 3o activated by DMAO (dry methylaluminoxane)/TIBA (triisobutylaluminum) was used to achieve activity of about 1250 g (mmol of Cr)⁻¹ h⁻¹ with 98.5 mol % 1‐hexene, along with a negligible amount of PE side product. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 444–450     

Molybdenum‐ and Tungsten‐Based Coordination Polymers as Catalysts for an Efficient and Rapid Synthesis of Hexahydro‐5‐oxoquinoline‐3‐carboxylates and 1,4‐Dihydropyridine‐3,5‐dicarboxylates

Hexahydro‐5‐oxoquinoline‐3‐carboxylates and 1,4‐dihydropyridine‐3,5‐dicarboxylates were synthesized efficiently and rapidly (2 min) in the presence of molybdenum‐ and tungsten‐based coordination polymers [M(Bu₃Sn)₂O₄)]_n (M=Mo or W) as catalysts (Schemes 1 and 2; Tables 2 and 3). The products were formed at room temperature in excellent yields (90–98%). The catalysts worked under heterogeneous conditions and were recyclable. The earlier reports for the application of these polymers to conduct organic synthesis are limited. The present method explores a new and useful application of these catalysts.     

Study on the Preparation of Cr‐based Catalysts Doped by Zn using Sol–Gel Auto‐Combustion Method and Its Application for Synthesis of 1‐Chloro‐2,3,3,4,4,5,5‐heptafluorocyclopentene

High‐surface‐area chromium‐based catalysts in the presence of a small amount of zinc were prepared via a sol–gel auto‐combustion method using chromic nitrate, zinc nitrate, and citric acid. First, the auto‐combustion behavior of the dried gel was investigated by derivative thermogravimetry and (DTG)‐TG and infrared (IR) techniques. The results revealed that the dried gel exhibited self‐propagating combustion properties. Second, the as‐burnt powders were characterized by IR , X‐ray diffraction (XRD) , Brunauer–Emmett–Teller analysis (BET) , and scanning electron microscopy (SEM) . The findings showed that the gels were directly converted into CrZn ‐O nanoparticles with high surface area during the auto‐combustion process. Third, the pre‐fluorination Cr‐Zn catalysts were characterized by XRD , BET , SEM , X‐ray photoelectron spectroscopy (XPS) , and Fourier transform (FT)‐IR spectroscopy of pyridine adsorption techniques. It was found that the presence of zinc led to significant structural changes in the catalyst, the particle size was smaller, the surface area became larger, and more active sites appeared. Finally, the catalytic activities of the samples were tested for the fluorination of 1,2‐dichlorohexafluorocyclopentene (1,2‐F6 ) with anhydrous hydrogen fluoride. The obtained results indicated that the pre‐fluorination activated Cr‐Zn catalysts prepared by this sol–gel auto‐combustion method exhibited high efficiency in the synthesis of cyclic hydrofluorocarbons.     

Synthesis and characterization of iron‐ and nitrogen‐functionalized graphene catalysts for oxygen reduction reaction

Iron‐ and nitrogen‐functionalized graphene (Fe‐N‐G), as well as iron‐ and nitrogen‐functionalized oxidized graphene (Fe‐N‐Gox) catalysts were synthesized as non‐noble metal electrocatalysts for oxygen reduction reaction (ORR). The physical properties of the resultant catalysts were characterized using nitrogen adsorption measurements, X‐ray diffraction, Raman and X‐ray photoelectron spectroscopies and transmission electron microscopy. Subsequently, ORR activities of the catalysts were determined electrochemically using a conventional three‐electrode cell via cyclic voltammetry with a rotating disc electrode, the results of which indicated that the synthesized catalysts had a marked electrocatalytic activity towards ORR in acid media. Among the synthesized catalysts, that functionalized using 2,4,6‐tris(2‐pyridyl)‐1,3,5‐triazine as nitrogen source had the highest electrocatalytic activity with the highest onset potential (0.98 V/SHE) and limiting current density (5.12 mA cm⁻²). The findings are particularly important to determine a non‐precious metal catalyst for ORR activity in fuel cells.     

N‐Heterocyclic Carbene,High Oxidation State Molybdenum Alkylidene Complexes: Functional‐Group‐Tolerant Cationic Metathesis Catalysts

We synthesized the first N‐heterocyclic carbene (NHC) complexes of Schrock’s molybdenum imido alkylidene bis(triflate) complexes. Unlike existing bis(triflate) complexes, the novel 16‐electron complexes represent metathesis active, functional‐group‐tolerant catalysts. Single‐crystal X‐ray structures of two representatives of this novel class of Schrock catalysts are presented and reactivity is discussed in view of their structural peculiarities. In the presence of monomer (substrate), these catalysts form cationic species and can be employed in ring‐closing metathesis (RCM), ring‐opening metathesis polymerization (ROMP), as well as in the cyclopolymerization of α,ω‐diynes. Monomers containing functional groups, which are not tolerated by the existing variations of Schrock’s catalyst, e.g., sec‐amine, hydroxy, and carboxylic acid moieties, can be used. These catalysts therefore hold great promise in both organic and polymer chemistry, where they allow for the use of protic monomers.     

Diethyldisulfoammonium chlorometallates as heterogeneous Brønsted–Lewis acidic catalysts for one‐pot synthesis of 14‐aryl‐7‐(N‐phenyl)‐14H‐dibenzo[a,j]acridines

A new series of Brønsted–Lewis acidic diethyldisulfoammonium chlorometallates, [DEDSA][FeCl₄] and [DEDSA]₂[Zn₂Cl₆], were synthesized as solid materials from the reaction of [(Et)₂N(SO₃H)₂][Cl] ionic liquid with transition metal chlorides (FeCl₃ and ZnCl₂) at 80 °C in neat condition for 2 h. The chlorometallates were fully characterized using various spectroscopic and analytical techniques such as Fourier transform infrared, UV–visible and Raman spectroscopies, powder X‐ray diffraction, scanning electron microscopy, energy‐dispersive X‐ray and thermogravimetric analyses, Hammett acidity and elemental analyses. Their catalytic activity was studied as reusable heterogeneous catalysts for the three‐component synthesis of novel 14‐aryl‐7‐(N‐phenyl)‐14H‐dibenzo[a,j]acridines under solvent‐free conditions at 100 °C.     

Ordered mesoporous SBA‐15 functionalized with yttrium(III) and cerium(III) complexes: Towards active heterogeneous catalysts for oxidation of sulfides and preparation of 5‐substituted 1H‐tetrazoles

Mesoporous SBA‐15 was synthesized and modified with 3‐chloropropyltrimethoxysilane and then used in immobilization of creatinine groups, which were employed to introduce Y³⁺ and Ce³⁺ to give rise to two novel yttrium and cerium catalysts: SBA‐15@Creatinine@M (M = Y and Ce). The structures of the SBA‐15@Creatinine@M catalysts were determined using various techniques. These catalysts offered outstanding catalytic performances in the oxidation of sulfides to sulfoxides and in the preparation of 5‐substituted 1H‐tetrazoles. An important characteristic of the SBA‐15@Creatinine@M catalysts is that they are very stable without a considerable decrease in their catalytic performance lasting seven cycles.     

Copolymerization of ethylene with 1‐hexene promoted by novel multi‐chelated non‐metallocene complexes with imine bridged imidazole ligand

A series of novel bridged multi‐chelated non‐metallocene catalysts is synthesized by the treatment of N,N‐imidazole, N,N‐dimethylimidazole, and N,N‐benzimidazole with n‐BuLi, 2,6‐dimethylaniline, and MCl₄ (M = Ti, Zr) in THF. These catalysts are used for copolymerization of ethylene with 1‐hexene after activated by methylaluminoxane (MAO). The effects of polymerization temperature, Al/M molar ratio, and pressure of monomer on ethylene copolymerization behaviors are investigated in detail. These results reveal that these catalysts are favorable for copolymerization of ethylene with 1‐hexene featured high catalytic activity and high comonomer incorporation. The copolymer is characterized by ¹³C NMR, WAXD, GPC, and DSC. The results confirm that the obtained copolymer features broad molecular weight distribution (MWD) about 33–35 and high 1‐hexene incorporation up to 9.2 mol %, melting temperature of the copolymer depends on the content of 1‐hexene incorporation within the copolymer chain and 1‐hexene unit in the copolymer chain isolates by ethylene units. The homopolymer of ethylene has broader MWD with 42–46. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 417–424, 2010     

Preparation of novel,liquid, solvent‐free,polyolefin‐based adhesives

An innovative procedure for functionalization of polyolefins was developed. It was found that synthesized polyolefins end‐capped with trimethoxysilane (silylated polyolefins) are new polyolefin‐based adhesives. To prepare the mentioned materials,1‐octene as a higher α‐olefin was cooligomerized with two linear, nonconjugated dienes (ie, 1,5‐hexadiene and 1,7‐octadiene) by using metallocene catalyst system, Cp₂HfCl₂/MAO, at room temperature. Then, amine‐terminated trimethoxysilane (3‐aminopropyltrimethoxysilane) was reacted with unsaturated bonds of synthesized cooligomers in the presence of palladium(II) acetate. Embedding of the dienes on 1‐octene oligomeric chains was explored by Fourier transform infrared (FTIR), ¹H, and ¹³C‐NMR spectroscopy. On the basis of the results, 1,5‐hexadiene showed both 1‐butene branch and five‐member ring. On the other hand, 1,7‐octadiene was incorporated by 1,2‐addition, forming both 1‐hexene branch and seven‐member ring in the cooligomer backbone. Mole percentage of C?C and cyclic moieties reached to a value of 28.54, 18.59% mol in 1‐octene/1,5‐hexadiene, and 38.04, 6.71% mol in 1‐octene/1,7‐octadiene cooligomers, respectively. Reaction of synthesized cooligomers with 3‐aminopropyltrimethoxysilane was confirmed by FTIR spectroscopy, which yielded targeted adhesives. To study the adhesion properties, resulting adhesives were applied to different substrates. Obtained results demonstrated that tensile shear strength of synthesized adhesives to polar substrates was 2.21% to 2.84% more than nonpolar substrates. Among studied systems, the best performance was achieved by1‐octene/1,7‐octadiene–based adhesive and Al substrate with tensile shear strength of 1.45 N/mm².     

Palladium‐catalyzed three‐component cyclization of 2‐bromocyclohex‐1‐enecarboxylic acids with carbon monoxide and arylhydrazines leading to 2‐anilinohydroisoindoline‐1,3‐diones

2‐Bromocyclohex‐1‐enecarboxylic acids are carbonylatively cyclized with arylhydrazines or their hydrochlorides in tetrahydrofuran at 120 °C under carbon monoxide pressure in the presence of a catalytic amount of PdCl₂ and 1,3‐bis(diphenylphosphino)propane along with Et₃N to give 2‐anilinohydroisoindoline‐1,3‐diones. Copyright © 2015 John Wiley & Sons, Ltd.     

Piperazine‐functionalized nickel ferrite nanoparticles as efficient and reusable catalysts for the solvent‐free synthesis of 2‐amino‐4H‐chromenes

Piperazine‐functionalized nickel ferrite (NiFe₂O₄) nanoparticles were synthesized as recoverable heterogeneous base catalysts using a routine method. The synthesized materials were characterized using various spectroscopic techniques such as infrared, X‐ray diffraction, scanning electron microscopy, energy‐dispersive X‐ray, thermogravimetry analysis, and vibrating sample magnetometry. Catalytic efficiency was investigated in the synthesis of 2‐amino‐4H‐chromene derivatives via a one‐pot three component reaction of aldehyde and malononitrile with β or α‐naphthol/5‐methyle resorcinol under solvent‐free conditions with good to high yields. This method is operationally simple and has several advantages such as good to high yield, short reaction times, solvent‐free conditions, and easy synthesis. Moreover, the catalyst was recovered easily using an external magnet and reused three times without distinctive loss in catalytic activity.