Three Polymorphic CdII Coordination Polymers Obtained from the Solution and Mechanochemical Reactions of 3‐Cyanopentane‐2,4‐dione with CdII Acetate

We previously reported that monomeric and polymeric metal complexes are obtained from solution and mechanochemical reactions of 3‐cyano‐pentane‐2,4‐dione (CNacacH) with 3d metal acetates (M=Mn^II, Fe^II, Co^II, Ni^II, Cu^II, and Zn^II). A common feature found in all complexes was that their structural base is trans‐[M(CNacac)₂]. Here, we report that the reactions of CNacacH with Cd^II acetate in the solution and solid states afford different coordination polymers composed of trans‐[Cd(CNacac)₂] and cis‐[Cd(CNacac)₂] units, respectively. From a methanol solution containing CNacacH (L) and Cd(OAc)₂ ? 2 H₂O (M), a coordination polymer ( Cd‐1 ) in which trans‐[Cd(CNacac)₂] units are three‐dimensionally linked was obtained. In contrast, two different coordination polymers, Cd‐2 and Cd‐3 , were obtained from mechanochemical reactions of CNacacH with Cd(OAc)₂ ? 2 H₂O at M/L ratios of 1:1 and 1:2, respectively. In Cd‐2 , cis‐[Cd(CNacac)₂] units are two‐dimensionally linked, whereas the units are linked three‐dimensionally in Cd‐3 . Furthermore, Cd‐1 and Cd‐2 converted to Cd‐3 by applying an annealing treatment and grinding with a small amount of liquid, respectively, in spite of the polymeric structures. These phenomena, 1) different structures are formed from solution and mechanochemical reactions, 2) two polymorphs are formed depending on the M/L ratio, and 3) structural transformation of resulting polymeric structures, indicate the usability of mechanochemical method in the syntheses of coordination polymers as well as the peculiar structural flexibility of cadmium‐CNacac polymers.     

Asymmetric Hydroformylation of Vinylfurans Catalyzed by {(11bS)‐4‐{[(1R)‐2′‐Phosphino[1,1′‐binaphthalen]‐2‐yl]oxy}dinaphtho[2,1‐d:1′,2′‐f]‐ [1,3,2]dioxaphosphepin}rhodium(I) [RhI{(R,S)‐binaphos}] Derivatives

The asymmetric hydroformylation of 2‐ and 3‐vinylfurans ( 2a and 2b , resp.) was investigated by using [Rh{(R,S)‐binaphos}] complexes as catalysts ((R,S)‐binaphos = (11bS)‐4‐{[1R)‐2′‐phosphino[1,1′‐binaphthalen]‐2‐yl]oxy}dinaphtho[2,1‐d:1′,2′‐f][1,3,2]dioxaphosphepin; 1 ). Hydroformylation of 2 gave isoaldehydes 3 in high regio‐ and enantioselectivities (Scheme 2 and Table). Reduction of the aldehydes 3 with NaBH₄ successfully afforded the corresponding alcohols 5 without loss of enantiomeric purity (Scheme 3).     

Stereospecific and molecular weight‐controlled polymerization of 1,3‐butadiene with Co(acac)3‐MAO catalyst

The polymerization of butadiene (Bd) with Co(acac)₃ in combination with methylaluminoxane (MAO) was investigated. The polymerization of Bd with Co(acac)₃‐MAO catalysts proceeded to give cis‐1,4 polymers (94 – 97%) bearing high molecular weights (40 × 10⁴) with relatively narrow molecular weight distributions (M_w's/M_n's). The molecular weight of the polymers increased linearly with the polymer yield, and the line passed through an original point. The polydispersities of the polymers kept almost constant during reaction time. This indicates that the microstructure and molecular weight of the polymers can be controlled in the polymerization of Bd with the Co(acac)₃‐MAO catalyst. The effects of reaction temperature, Bd concentration, and the MAO/Co molar ratio on the cis‐1,4 microstructure and high molecular weight polymer in the polymerization of Bd with Co(acac)₃‐MAO catalyst were observed. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 2793–2798, 2001     

Neodymium‐based catalysts bearing phosphate ligands for ring‐opening polymerization of ɛ‐caprolactone

Neodymium‐based catalysts coordinated with phosphate ligands (NdCl₃·3L), where L = triethyl phosphate (TEP) or tris(2‐ethylhexyl) phosphate (TEHP), were synthesized. The ring‐opening polymerizations (ROP) of ɛ‐caprolactone (ɛ‐CL) with these catalysts in the presence of benzyl alcohol initiator were performed, yielding polymers with well‐defined molecular weights and relatively narrow polydispersity index (PDI = 1.22–1.65). In situ NMR analysis of the reaction between NdCl₃·3TEP and benzyl alcohol indicated that ROP proceeds through a coordination‐insertion mechanism. The end groups of the resultant polymers were determined using MALDI‐ToF mass spectrometry and NMR spectroscopy. The quasi‐living nature of this catalytic system was demonstrated by kinetic studies and the successful synthesis of the block copolymer poly(ɛ‐caprolactone)‐block‐poly(l ‐lactide) by sequential monomer addition. Kinetic studies revealed that the catalyst with the bulkier TEHP ligand increased the rate of ROP of ɛ‐CL as compared to the TEP ligand. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 1289–1296     

Efficient terpolymerization of ethylene and styrene with α‐olefins by aryloxo‐modified half‐titanocene‐based catalysts and cocatalyst systems

Aryloxo‐modified half‐titanocenes, Cp′TiCl₂(O‐2,6‐ⁱPr₂C₆H₃) [Cp′ = Cp* ( 1 ), ^tBuC₅H₄ ( 2 )], catalyze terpolymerization of ethylene and styrene with α‐olefin (1‐hexene and 1‐decene) efficiently in the presence of cocatalyst, affording high‐molecular‐weight polymers with unimodal distributions (compositions). Efficient comonomer incorporations have been achieved by these catalysts. The content of each comonomer (α‐olefin, styrene, etc.) could be controlled by varying the comonomer concentration charged, and resonances ascribed to styrene and α‐olefin repeated insertion were negligible. The terpolymerization with p‐methylstyrene (p‐MS) in place of styrene also proceeded in the presence of [PhN(H)Me₂][B(C₆F₅)₄] and AlⁱBu₃ cocatalyst, and p‐MS was incorporated in an efficient matter, affording high‐molecular‐weight polymers with uniform molecular weight distributions. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 2565–2574     

2, 4‐Dimethylpenta‐1, 3‐dien‐ und 2, 4‐Dimethylpentadienyl‐Komplexe des Rhodiums und Iridiums

2, 4‐Dimethylpenta‐1, 3‐diene and 2, 4‐Dimethylpentadienyl Complexes of Rhodium and Iridium The complexes [(η⁴‐C₇H₁₂)RhCl]₂ ( 1 ) (C₇H₁₂ = 2, 4‐dimethylpenta‐1, 3‐diene) and [(η⁴‐C₇H₁₂)₂IrCl] ( 2 ) were obtained by interaction of C₇H₁₂ with [(η²‐C₂H₄)₂RhCl]₂ and [(η²‐cyclooctene)₂IrCl]₂, respectively. The reaction of 1 or 2 with CpTl (Cp = η⁵‐C₅H₅) yields the compounds [CpM(η⁴‐C₇H₁₂)] ( 3a : M = Rh; 3b : M = Ir). The hydride abstraction at the pentadiene ligand of 3a , b with Ph₃CBF₄ proceeds differently depending on the solvent. In acetone or THF the “half‐open” metallocenium complexes [CpM(η⁵‐C₇H₁₁)]BF₄ ( 4a : M = Rh; 4b : M = Ir) are obtained exclusively. In dichloromethane mixtures are produced which additionally contain the species [(η⁵‐C₇H₁₁)M(η⁵‐C₅H₄CPh₃)]BF₄ ( 5a : M = Rh; 5b : M = Ir) formed by electrophilic substitution at the Cp ring, as well as the η³‐2, 4‐dimethylpentenyl compound [(η³‐C₇H₁₃)Rh{η⁵‐C₅H₃(CPh₃)₂}]BF₄ ( 6 ). By interaction of 2, 4‐dimethylpentadienyl potassium with 1 or 2 the complexes [(η⁴‐C₇H₁₂)M(η⁵‐C₇H₁₁)] ( 7a : M = Rh; 7b : M = Ir) are generated which show dynamic behaviour in solution; however, attempts to synthesize the “open” metallocenium cations [(η⁵‐C₇H₁₁)₂M]⁺ by hydride abstraction from 7a , b failed. The new compounds were characterized by elemental analysis and spectroscopically, 4b and 5a also by X‐ray structure analysis.     

Three isotypic polymeric complexes with rare earth cations,but‐2‐enoate anions and 4,4′‐(ethane‐1,2‐diyl)dipyridine and 4,4′‐(ethene‐1,2‐diyl)dipyridine bridging ligands

Three isotypic rare earth complexes, catena‐poly[[aquabis(but‐2‐enoato‐κ²O,O′)yttrium(III)]‐bis(μ‐but‐2‐enoato)‐κ³O,O′:O;κ³O:O,O′‐[aquabis(but‐2‐enoato‐κ²O,O′)yttrium(III)]‐μ‐4,4′‐(ethane‐1,2‐diyl)dipyridine‐κ²N:N′], [Y₂(C₄H₅O₂)₆(C₁₂H₁₂N₂)(H₂O)₂], the gadolinium(III) analogue, [Gd₂(C₄H₅O₂)₆(C₁₂H₁₂N₂)(H₂O)₂], and the gadolinium(III) analogue with a 4,4′‐(ethene‐1,2‐diyl)dipyridine bridging ligand, [Gd₂(C₄H₅O₂)₆(C₁₂H₁₀N₂)(H₂O)₂], are one‐dimensional coordination polymers made up of centrosymmetric dinuclear [M(but‐2‐enoato)₃(H₂O)]₂ units (M = rare earth), further bridged by centrosymmetric 4,4′‐(ethane‐1,2‐diyl)dipyridine or 4,4′‐(ethene‐1,2‐diyl)dipyridine spacers into sets of chains parallel to the [20] direction. There are intra‐chain and inter‐chain hydrogen bonds in the structures, the former providing cohesion of the linear arrays and the latter promoting the formation of broad planes parallel to (010).     

Polymerization of (E)‐1,3‐Pentadiene and (E)‐2‐methyl‐1,3‐pentadiene with neodymium catalysts: Examination of the factors that affect the stereoselectivity

(E)‐1,3‐Pentadiene (EP) and (E)‐2‐methyl‐1,3‐pentadiene (2MP) were polymerized to cis‐1,4 polymers with homogeneous and heterogeneous neodymium catalysts to examine the influence of the physical state of the catalyst on the polymerization stereoselectivity. Data on the polymerization of (E)‐1,3‐hexadiene (EH) are also reported. EP and EH gave cis‐1,4 isotactic polymers both with the homogeneous and with the heterogeneous system, whereas 2MP gave an isotactic cis‐1,4 polymer with the heterogeneous catalyst and a syndiotactic cis‐1,4 polymer, never reported earlier, with the homogeneous one. For comparison, the results obtained with the soluble CpTiCl₃‐based catalyst (Cp = cyclopentadienyl), which gives cis‐1,4 isotactic poly(2MP), are examined. A tentative interpretation is given for the mechanism of the formation of the stereoregular polymers obtained and a complete NMR characterization of the cis‐1,4‐syndiotactic poly(2MP) is reported. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 3227–3232     

A Convenient Synthesis of 2,3‐Dihydro‐4H‐thiopyrano[2,3‐b]‐, ‐[2,3‐c]‐, or ‐[3,2‐c]pyridin‐4‐ones by the Reaction of the Corresponding 1‐(Chloropyridinyl)alk‐2‐en‐1‐ones with NaSH

2,3‐Dihydro‐4H‐thiopyrano[2,3‐b]pyridin‐4‐ones 4 were prepared by a three‐step sequence from commercially available 2‐chloropyridine ( 1 ). Thus, successive treatment of 1 with ⁱPr₂NLi (LDA) and α,β‐unsaturated aldehydes gave 1‐(2‐chloropyridin‐3‐yl)alk‐2‐en‐1‐ols 2 , which were oxidized with MnO₂ to 1‐(2‐chloropyridin‐3‐yl)alk‐2‐en‐1‐ones 3 . The reactions of 3 with NaSH?n H₂O proceeded smoothly at 0° in DMF to provide the desired thiopyranopyridinones. Similarly, 2,3‐dihydro‐4H‐thiopyrano[2,3‐c]pyridin‐4‐ones 8 and 2,3‐dihydro‐4H‐thiopyrano[3,2‐c]pyridin‐4‐ones 12 were obtained starting from 3‐chloropyridine ( 5 ) and 4‐chloropyridine ( 9 ), respectively.     

Novel isolated,L‐amino acid‐ligated rhodium catalysts that induce highly helix‐sense‐selective polymerization of an achiral 3,4,5‐trisubstituted phenylacetylene

Two novel chiral well‐defined rhodium complexes, Rh(cod)(L‐Phe) (cod = 1,5‐cyclooctadiene, Phe = phenylalanine) and Rh(cod)(L‐Val) (Val = valine) were synthesized, isolated by recrystallization, and characterized. The helix‐sense‐selective polymerization (HSSP) of an achiral 3,4,5‐trisubstituted phenylacetylene, p‐dodecyloxy‐m,m‐dihydroxyphenylacetylene (DoDHPA) was examined by using the two Rh complexes as catalysts. These catalysts provided high molecular weight polymers (M_w 28 × 10⁴?45 × 10⁴) in about 40%–85% yields. The resulting polymers exhibited a bisignated CD signal at about 300 nm and a broad signal around 470 nm, indicating that they have preferential one‐handed helical structure. The present catalysts achieved larger molar ellipticity up to [θ]₃₁₀ = 13.0 × 10⁴ deg cm²/dmol than those with binary chiral catalytic systems, [Rh(cod)Cl]₂/(L‐phenylalaninol), [Rh(cod)Cl]₂/(L‐valinol), and [Rh(nbd)Cl]₂/(R)‐PEA. All these results manifest that the present, well‐defined Rh complexes serve as excellent catalysts for the HSSP of DoDHPA. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 2346–2351     

Titanium complexes of dialkanolamine ligands as initiators for living ring‐opening polymerization of ε‐caprolactone

The titanium complexes with one ( 1a , 1b , 1c ) and two ( 2a , 2b ) dialkanolamine ligands were used as initiators in the ring‐opening polymerization (ROP) of ε‐caprolactone. Titanocanes 1a and 1b initiated living ROP of ε‐caprolactone affording polymers whose number‐average molecular weights (M_n) increased in direct proportion to monomer conversion (M_n ≤ 30,000 g mol^?1) in agreement with calculated values, and were inversely proportional to initiator concentration, while the molecular weight distribution stayed narrow throughout the polymerization (M_w/M_n ≤ 1.2 up to 80% monomer conversion). ¹H‐NMR and MALDI‐TOF‐MS studies of the obtained poly(ε‐caprolactone)s revealed the presence of an isopropoxy group originated from the initiator at the polymer termini, indicating that the polymerization takes place exclusively at the Ti–OⁱPr bond of the catalyst. The higher molecular weight polymers (M_n ≤ 70,000 g mol^?1) with reasonable MWD (M_w/M_n ≤ 1.6) were synthesized by living ROP of ε‐caprolactone using spirobititanocanes ( 2a , 2b ) and titanocane 1c as initiators. The latter catalysts, according MALDI‐TOF‐MS data, afford poly(ε‐caprolactone)s with almost equal content of α,ω‐dihydroxyl‐ and α‐hydroxyl‐ω(carboxylic acid)‐terminated chains arising due to monomer insertion into “Ti–O” bond of dialkanolamine ligand and from initiation via traces of water, respectively. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1230–1240, 2010     

Diimido‐, Imido(oxo)‐, Dioxo‐ und Imido(alkyliden)‐Halbsandwich‐Verbindungen über selektive Hydrolyse und α—H‐Abstraktion an Organylkomplexen des sechswertigen Molybdäns und Wolframs

Diimido, Imido Oxo, Dioxo, and Imido Alkylidene Halfsandwich Compounds via Selective Hydrolysis and α—H Abstraction in Molybdenum(VI) and Tungsten(VI) Organyl Complexes Organometal imides [(η⁵‐C₅R₅)M(NR′)₂Ph] (M = Mo, W, R = H, Me, R′ = Mes, tBu) 4 — 8 can be prepared by reaction of halfsandwich complexes [(η⁵‐C₅R₅)M(NR′)₂Cl] with phenyl lithium in good yields. Starting from phenyl complexes 4 — 8 as well as from previously described methyl compounds [(η⁵‐C₅Me₅)M(NtBu)₂Me] (M = Mo, W), reactions with aqueous HCl lead to imido(oxo) methyl and phenyl complexes [(η⁵‐C₅Me₅)M(NtBu)(O)(R)] M = Mo, R = Me ( 9 ), Ph ( 10 ); M = W, R = Ph ( 11 ) and dioxo complexes [(η⁵‐C₅Me₅)M(O)₂(CH₃)] M = Mo ( 12 ), M = W ( 13 ). Hydrolysis of organometal imides with conservation of M‐C σ and π bonds is in fact an attractive synthetic alternative for the synthesis of organometal oxides with respect to known strategies based on the oxidative decarbonylation of low valent alkyl CO and NO complexes. In a similar manner, protolysis of [(η⁵‐C₅H₅)W(NtBu)₂(CH₃)] and [(η⁵‐C₅Me₅)Mo(NtBu)₂(CH₃)] by HCl gas leads to [(η⁵‐C₅H₅)W(NtBu)Cl₂(CH₃)] 14 und [(η⁵‐C₅Me₅)Mo(NtBu)Cl₂(CH₃)] 15 with conservation of the M‐C bonds. The inert character of the relatively non‐polar M‐C σ bonds with respect to protolysis offers a strategy for the synthesis of methyl chloro complexes not accessible by partial methylation of [(η⁵‐C₅R₅)M(NR′)Cl₃] with MeLi. As pure substances only trimethyl compounds [(η⁵‐C₅R₅)M(NtBu)(CH₃)₃] 16 ‐ 18 , M = Mo, W, R = H, Me, are isolated. Imido(benzylidene) complexes [(η⁵‐C₅Me₅)M(NtBu)(CHPh)(CH₂Ph)] M = Mo ( 19 ), W ( 20 ) are generated by alkylation of [(η⁵‐C₅Me₅)M(NtBu)Cl₃] with PhCH₂MgCl via α‐H abstraction. Based on nmr data a trend of decreasing donor capability of the ligands [NtBu]^2— > [O]^2— > [CHR]^2— ? 2 [CH₃]^— > 2 [Cl]^— emerges.     

Synthesis and characterization of multifunctional polymers via atom transfer radical polymerization of N‐(ω′‐alkylcarbazolyl) methacrylates initiated by Ru(II) polypyridyl chromophores

A series of poly(N‐(ω′‐alkylcarbazoly) methacrylates) tris(bipyridine) Ru‐centered bifunctional polymers with good filming, thermal, and solubility properties were synthesized and characterized. Atom transfer radical polymerization (ATRP) of N‐(ω′‐alkylcarbazoly) methacrylates in solution was used, where Ru complexes with one and three initiating sites acted as metalloinitiators with NiBr₂(PPh₃)₂ as a catalyst. ATRP reaction conditions with respect to polymer molecular weights and polydispersity indices (PDI) of the target bifunctional polymers were examined. Electronic absorption and emission spectra of the resultant functional polymers provided evidence of chromophore presence within a single polymeric chain. The thermal properties of all polymers were also investigated by differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA), and these analyses have indicated that these polymers possess higher thermal stabilities than poly(methyl methacrylate) (PMMA) obtained via free radical polymerization. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 6057–6072, 2005     

Ethylene polymerization with FI complexes having novel phenoxy‐imine ligands: Effect of metal type and complex immobilization

A series of bis(phenoxy‐imine) vanadium and zirconium complexes with different types of R³ substituents at the nitrogen atom, where R³ = phenyl, naphthyl, or anthryl, was synthesized and investigated in ethylene polymerization. Moreover, the catalytic performance was verified for three supported catalysts, which had been obtained by immobilization of bis[N‐(salicylidene)‐1‐naphthylaminato]M(IV) dichloride complexes (M = V, Zr, or Ti) on the magnesium carrier MgCl₂(THF)₂/Et₂AlCl. Catalytic performance of both supported and homogeneous catalysts was verified in conjunction with methylaluminoxane (MAO) or with alkylaluminium compounds (Et_nAlCl_3?n, n = 1–3). The activity of FI vanadium and zirconium complexes was observed to decline for the growing size of R³, whereas the average molecular weight (MW) of the polymers was growing for larger substituent. Moreover, vanadium complexes exhibited the highest activity with EtAlCl₂, whereas zirconium ones showed the best activity with MAO. All immobilized systems were most active in conjunction with MAO, and their activities were higher than those for their homogeneous counterparts, and they gave polymers with higher average MWs. That effect was in particular evident for the titanium catalyst. The vanadium complex 3 was also a good precursor for ethylene/1‐octene copolymerization; however, its immobilization reduced its potential for incorporation of a comonomer into a polyethylene chain. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Cyano‐Bridged ‘Oximato’ Complexes: Synthesis,Structure, and Catalase‐Like Activities

The reaction of the ‘oximato’‐ligand precursor A (Fig. 1) and metal salts with KCN gave two mononuclear complexes [ML(CN)(H₂O)_n](ClO₄) ( 1 and 2 ; L={N‐(hydroxy‐κO)‐α‐oxo‐N′‐[(pyridin‐2‐yl‐κN)methyl[1,1′‐biphenyl]‐4‐ethanimidamidato‐κN′}; M=Co^II ( 1 ), Cu^II ( 2 ); n=2 for Co^II, n=0 for Cu^II; Figs. 2 and 3). The new cyano‐bridged pentanuclear ‘oximato’ complexes [{ML(H₂O)_n(NC)}₄M¹(H₂O)_x](ClO₄)₂ ( 3 – 6 ) and trinuclear complexes [{ML(H₂O)_n(NC)}₂M¹L](ClO₄) ( 7 – 10 ) ([M¹=Mn^II, Cu^II; x=2 for Mn^II, x=0 for Cu^II] were synthesized from mononuclear complexes and characterized by elemental analyses, magnetic susceptibility, molar conductance, and IR and thermal analysis. The four [ML(CN)(H₂O)_n]⁺ moieties are connected by a metal(II) ion in the pentanuclear complexe 3 – 6 , each one involving four cyano bridging ligands (Fig. 4). The central metal ion displays a square‐planar or octahedral geometry, with the cyano bridging ligands forming the equatorial plane. The axial positions are occupied by two aqua ligands in the case of the central Mn‐atom. The two [ML(CN)(H₂O)_n]⁺ moieties and an ‘oximato’ ligand are connected by a metal(II) ion in the trinuclear complexes 7 – 10 , each one involving two cyano bridging ligands (Fig. 5). The central metal ions display a distorted square‐pyramidal geometry, with two cyano bridging ligands and the donor atoms of the tridentate ‘oximato’ ligand. Moreover catalytic activities of the complexes for the disproportionation of hydrogen peroxide (H₂O₂) were also investigated in the presence of 1H‐imidazole. The synthesized homopolynuclear Cu^II complexes 6 and 10 displayed eficiency in disproportion reactions of H₂O₂ producing H₂O and dioxygen thus showing catalase‐like activity.     

Synthese,Struktur und Reaktivität von η3‐1,2‐Diphosphaallylkomplexen sowie von [{(η5‐C5H5)(CO)2W–Co(CO)3}{μ‐AsCH(SiMe3)2}(μ‐CO)]

Syntheses, Structure and Reactivity of η³‐1,2‐Diphosphaallyl Complexes and [{(η⁵‐C₅H₅)(CO)₂W–Co(CO)₃}{μ‐AsCH(SiMe₃)₂}(μ‐CO)] Reaction of ClP=C(SiMe₂iPr)₂ ( 3 ) with Na[Mo(CO)₃(η⁵‐C₅H₅)] afforded the phosphavinylidene complex [(η⁵‐C₅H₅)(CO)₂Mo=P=C(SiMe₂iPr)₂] ( 4 ) which in situ was converted into the η¹‐1,2‐diphosphaallyl complex [η⁵‐(C₅H₅)(CO)₂Mo{η³‐tBuPPC(SiMe₂iPr)₂] ( 6 ) by treatment with the phosphaalkene tBuP=C(NMe₂)₂. The chloroarsanyl complexes [(η⁵‐C₅H₅)(CO)₃M–As(Cl)CH(SiMe₃)₂] [where M = Mo ( 9 ); M = W ( 10 )] resulted from the reaction of Na[M(CO)₃(η⁵‐C₅H₅)] (M = Mo, W) with Cl₂AsCH(SiMe₃)₂. The tungsten derivative 10 and Na[Co(CO)₄] underwent reaction to give the dinuclear μ‐arsinidene complex [(η⁵‐C₅H₅)(CO)₂W–Co(CO)₃{μ‐AsCH(SiMe₃)₂}(μ‐CO)] ( 11 ). Treatment of [(η⁵‐C₅H₅)(CO)₂Mo{η³‐tBuPPC(SiMe₃)₂}] ( 1 ) with an equimolar amount of ethereal HBF₄ gave rise to a 85/15 mixture of the saline complexes [(η⁵‐C₅H₅)(CO)₂Mo{η²‐tBu(H)P–P(F)CH(SiMe₃)₂}]BF₄ ( 18 ) and [Cp(CO)₂Mo{F₂PCH(SiMe₃)₂}(tBuPH₂)]BF₄ ( 19 ) by HF‐addition to the PC bond of the η³‐diphosphaallyl ligand and subsequent protonation ( 18 ) and/or scission of the PP bond by the acid ( 19 ). Consistently 19 was the sole product when 1 was allowed to react with an excess of ethereal HBF₄. The products 6 , 9 , 10 , 11 , 18 and 19 were characterized by means of spectroscopy (IR, ¹H‐, ¹³C{¹H}‐, ³¹P{¹H}‐NMR, MS). Moreover, the molecular structures of 6 , 11 and 18 were determined by X‐ray diffraction analysis.     

Stereospecific polymerization of 1‐hexene catalyzed by ansa‐metallocene/methylaluminoxane systems under high pressures

Stereospecific polymerization of 1‐hexene under high pressures (up to 1,000 MPa = ca. 10,000 atm) using metallocene/methylaluminoxane (MAO) catalysts was investigated. Several C₂‐symmetric ansa‐metallocenes, their meso‐isomers, and two C_s‐symmetric ansa‐metallocenes were employed as catalyst precursors. In the course of this study, novel C₂‐symmetric germylene‐bridged ansa‐metallocenes, (rac‐[Me₂Ge(η⁵‐C₅H‐2,3,5‐Me₃)₂MCl₂] (M = Zr, rac‐4a; M = Hf, rac‐4b), have been prepared. High pressures induced enhancement of the catalytic activity and the molecular weight of the polymers in most of the catalysts. The maximum of both the catalytic activity and the molecular weight of the polymers was mostly observed at 100–500 MPa in each catalyst, although the enhanced ratio was smaller than that observed for nonbridged metallocenes. Isospecificity of the C₂‐symmetric ansa‐metallocene catalysts was essentially maintained even under high pressure. Highly isotactic polyhexene ([mmmm] = 91.6%) with very high molecular weight (M_w = 2,360,000) was achieved by rac‐4b under 250 MPa. High pressures slightly decreased syndiotacticity when the C_s‐symmetric ansa‐metallocene, isopropylidene(1‐η⁵‐cyclopentadienyl)(9‐η⁵‐fluorenyl)zirconium dichloride 5, was employed. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 283–292, 1999     

Three‐Step Synthesis of 3‐Aryl‐2‐sulfanylthieno[2,3‐b]‐, ‐[2,3‐c]‐, or ‐[3,2‐c]pyridines from the Corresponding Aryl(halopyridinyl)methanones

A convenient three‐step procedure for the synthesis of three types of 3‐aryl‐2‐sulfanylthienopyridines 4, 8 , and 12 has been developed. The first step of the synthesis of thieno[2,3‐b]pyridine derivatives 4 is the replacement of the halo with a (sulfanylmethyl)sulfanyl group in aryl(2‐halopyridin‐3‐yl)methanones 1 by successive treatment with Na₂S?9 H₂O and chloromethyl sulfides to give aryl{2‐[(sulfanylmethyl)sulfanyl]pyridin‐3‐yl}methanones 2 . In the second step, these were treated with LDA (LiNⁱPr₂) to give 3‐aryl‐2,3‐dihydro‐2‐sulfanylthieno[2,3‐b]pyridin‐3‐ols 3 , which were dehydrated in the last step with SOCl₂ in the presence of pyridine to give the desired products. Similarly, thieno[2,3‐c]pyridine and thieno[3,2‐c]pyridine derivatives, 8 and 12 , respectively, can be prepared from aryl(3‐chloropyridin‐4‐yl)methanones 5 and aryl(4‐chloropyridin‐3‐yl)methanones 9 , respectively.     

Syntheses,Structures, and Magnetism of Trinuclear Zn2Ln Complexes with 2,6‐Dipicolinoylbis(N,N‐diethylthiourea)

The bifunctional ligand 2,6‐dipicolinoylbis(N,N‐diethylthiourea) (H₂L) readily reacts with mixtures of Zn(CH₃COO)₂ and LnCl₃ in MeOH at ambient temperature with formation of trinuclear heterobimetallic complexes [Zn₂Ln(L)₂(OAc)₃] ( 1a – 1f ) (Ln = Ce, Nd, Sm, Gd, Dy, Er). The X‐ray single‐crystal diffraction and structural studies of the complexes revealed their isostructural nature, in which two doubly‐charged ligands {L^2–} bind two Zn²⁺ ions with the terminal acylthiourea sites and one Ln³⁺ ion with the central 2,6‐pyridinedicarboxamide site. In the complexes, the coordination numbers of Ln^III and Zn^II ions are 9 and 5, respectively. Magnetic properties of the complexes were studied by temperature‐dependent dc magnetic measurements. The observed μ_eff values at room temperature are all closed to the calculated values. Fitting χ_M and M data of [Zn₂Gd(L)₂(OAc)₃] ( 1d ) shows a g_iso value of 1.94.     

Reaktion von Kupferarylen mit Imidazol‐2‐ylidenen oder Triphenylphosphan ‐ Bildung von 1:1‐Addukten mit zweifach koordinierten Kupferatomen

Reaction of Copper Aryls with Imidazol‐2‐ylidenes or Triphenylphosphane — Formation of 1:1‐Adducts with Two‐coordinate Copper Atoms The reaction of the copper aryls CuDmp (Dmp = 2, 6‐Mes₂C₆H₃; Mes = 2, 4, 6‐Me₃C₆H₂) and CuMes with the σ‐donors triphenylphosphane and 1, 3‐Di‐iso‐propyl‐4, 5‐dimethylimidazol2‐ylidene affords the adducts DmpCu←PPh₃ ( 1 ), DmpCu←C{N(iPr)CMe}₂ ( 2 ) and MesCu←C{N(iPr)CMe}₂ ( 3 ) in yields between 65 and 84 %. The colorless compounds were characterized by ¹H and ¹³C‐NMR‐spectroscopy, single crystal structure analysis as well as by ³¹P NMR‐spectroscopy ( 1 ), elemental analysis ( 2 ), mass spectrometry ( 2 , 3 ), IR‐spectroscopy ( 2 ) and melting point ( 2 , 3 ). In the solid state structures the two‐coordinate copper atoms possess relatively short Cu—P and Cu—C(carbene) distances of 218, 91(11) ( 1 ), 190, 2(3) ( 2 ) and 191, 1(4) pm ( 3 ).