Organoaluminum Compounds as Catalysts for Monohydroboration of Carbodiimides

The effective catalytic activity of organoaluminum compounds for the monohydroboration of carbodiimides has been demonstrated. Two aluminum complexes, 2 and 3 , were synthesized and characterized. The efficient catalytic performances of four aluminum hydride complexes L¹AlH₂ (L¹=HC(CMeNAr)₂, Ar=2,6-Et₂C₆H₃; 1 ), L²AlH₂(NMe₃) (L²=o-C₆H₄F(CH=N-Ar), Ar=2,6-Et₂C₆H₃; 2 ), L³AlH (L³=2,6-bis(1-methylethyl)-N-(2-pyridinylmethylene)phenylamine; 3 ), and L⁴AlH(NMe₃) (L⁴=o-C₆H₄(N-Dipp)(CH=N-Dipp), Dipp=2,6-iPr₂C₆H₃; 4 ), and an aluminum alkyl complex L¹AlMe₂ ( 5 ) were used for the monohydroboration of carbodiimides investigated under solvent-free and mild conditions. Compounds 1 – 3 and 5 can produce monohydroborated N-borylformamidine, whereas 4 can afford the C-borylformamidine product. A suggested mechanism of this reaction was explored, and the aluminum formamidinate compound 6 was characterized by single-crystal X-ray, also a stoichiometric reaction was investigated.     

Ionic iron(III) complexes bearing a dialkylbenzimidazolium cation: Efficient catalysts for magnesium‐mediated cross‐couplings of aryl phosphates with alkyl bromides

A series of ionic iron(III) complexes of general formula [HLⁿ ][FeX₄] (HL¹ = 1,3‐dibenzylbenzimidazolium cation, X = Cl, 1 ; HL¹, X = Br, 2 ; HL² = 1,3‐dibutylbenzimidazolium cation, X = Br, 3 ; HL³ = 1,3‐bis(diphenylmethyl)benzimidazolium cation, X = Br, 4 ) were easily prepared in high yields by the direct reaction of FeX₃ with 1 equiv. of [HLⁿ ]X under mild conditions. All of them were characterized using elemental analysis, Raman spectroscopy and electrospray ionization mass spectrometry, and X‐ray crystallography for 1 and 4 . In the presence of magnesium turnings and LiCl, these air‐ and moisture‐insensitive complexes showed high catalytic activities in direct cross‐couplings of aryl phosphates with primary and secondary alkyl bromides with broad substrate scope, wherein complex 4 was the most effective.     

Group 4 Complexes Bearing Pyrrolide Ligand for Intramolecular Alkene Hydroamination and Activation of C≡N Bond

Titanium and zirconium complexes supported by a pyrrolide ligand HL¹ [HL¹ = 2‐cyano‐1H‐pyrrole], Ti₂(L²)₂(NMe₂)₂ ( 1 ) and Zr₃(L²)₃(NMe₂)₆ ( 2 ) [L² = N,N‐dimethyl‐1H‐pyrrol‐2‐carboximidamide, NMe₂‐L¹] were synthesized and characterized. The ligand L² was generated by activation of C≡N bond of HL¹ with HNMe₂. In complex 1 , two Ti^IV atoms are bridged by two nitrogen atoms. There are three characteristic Zr^IV ions in 2 , which are six‐, seven‐ and six‐coordinate, respectively. They were tested as catalysts for the intramolecular hydroamination of aminoalkenes, and the respective N‐heterocycles were afforded in 74–99 % yields. Moreover, the formation of L² ligand indicates that the amination of C≡N bond can be considered as a new and rapid way to synthesize other C–N bonds.     

Synthesis,structural studies and antimicrobial evaluation of nickel (II) complexes of NNS tridentate thiosemicarbazone based ligands

Synthesis and characterization of three nickel complexes [NiCl(L¹)] 1 , [NiCl(L²)] 2 and [NiCl(L³)] 3 are described {HL¹ = 4‐(2,5‐dimethoxyphenyl)‐1‐((pyridin‐2‐yl)methylene)thiosemicarbazide, HL² = 4‐(3‐nitrophenyl)‐1‐((pyridin‐2‐yl)methylene)thiosemicarbazide and HL³ = 4‐(2,4‐dimethoxyphenyl)‐1‐((pyridin‐2‐yl)methylene)thiosemicarbazide} and among the tridentate ligands HL³ is reported for the first time. The structures of the complexes were assigned based on CHNS microanalysis, spectroscopic (IR & UV–Vis.) data and solution conductivity studies. The absence of any magnetism for the complexes proved their square planar geometry. Single crystals of complex 1 were grown and analyzed by XRD analysis which confirmed the complex planarity as each Ni atom connects to three (two nitrogen and one sulfur) atoms from the thiosemicarbazone ligand and an additional chlorine atom. Packing of the complex 1 in the crystal lattice was proved to stabilize via intermolecular hydrogen bonds. Antimicrobial activities of 1 – 3 were studied in vitro against fungal and bacterial species and, in several instances, the complexes possessed improved antibacterial behavior in comparison to chloramphenicol.     

Cyclopalladation of indole-3-carboxaldehyde aroylhydrazones

Reactions of PdCl₂, LiCl, indole-3-carboxaldehyde 4-R-benzoylhydrazones (H₂Lⁿ; n = 1, 2, 3 and 4 for R = H, Cl, OMe and NMe₂, respectively) and CH₃COONa·3H₂O in 1:2:1:1 mol ratio in methanol produce the cyclopalladated species of general formula [Pd(HLⁿ)Cl] in 65-85% yields. The complexes have been characterized with the help of elemental analysis and spectroscopic (infrared, electronic and NMR) measurements. The proton NMR spectra of the complexes suggest palladation at the peri position of the indole moiety in (HLⁿ)⁻. Molecular structure of a representative complex determined by X-ray crystallography confirms the peri-palladation and formation of a distorted CNOCl square-plane around the metal centre by the tridentate (HLⁿ)⁻ and the chloride.     

Tweaking the affinity of aryl‐substituted diazosalicylato‐ and pyridine ligands towards Zn (II) and its neighbors in the periodic system of the elements,Cu (II) and Cd (II), and their antimicrobial activity

A series of six new Zn (II) compounds, viz., [Zn(HL^ASA)₂(Py)₂] ( 1 ), [Zn(HL^MASA)₂(Py)₂] ( 2 ), [Zn(HL^MASA)₂(4‐MePy)₂] ( 3 ), [Zn(HL^CASA)₂(4‐MePy)₂] ( 4 ), [Zn(HL^BASA)₂(Py)₂] ( 5 ), [Zn(HL^BASA)₂(4‐MePy)₂] ( 6 ) and representative Cu (II) and Cd (II) complexes, viz., [Cu(HL^ASA)₂(Py)₂(H₂O)] ( 7 ) and [Cd(HL^BASA)₂(Py)₃] ( 8 ) [(HL^XASA)^? = para‐substituted 5‐[(E)‐2‐(aryl)‐1‐diazenyl]‐2‐hydroxybenzoate with X = H (ASA), Me (MASA), Cl (CASA) or Br (BASA); Py = pyridine; 4‐MePy = 4‐methylpyridine] have been synthesized and characterized by spectroscopic techniques and single‐crystal X‐ray diffraction analysis. The structural characterization of the compounds revealed distorted tetrahedral ( 1 – 6 ), square‐pyramidal ( 7 ) and pentagonal‐bipyramidal ( 8 ) coordination geometries around the metal atom, in which the aryl‐substituted diazosalicylate ligands are coordinated only through the oxygen atoms of carboxylate groups, either in an anisobidentate or isobidentate mode; meanwhile, the 2‐hydroxy groups of the monoanionic ligand (HL^XASA)^? are involved only in intramolecular O‐H···O hydrogen bonds with the carboxylate function. In the crystal structures of 1 – 8 , the complex molecules are assembled by π‐stacking interactions giving mostly infinite 1D strands. The intermolecular binding in the solid state structures is accomplished by diverse additional non‐covalent contacts including C‐H···O, C‐H···N, C‐H···π, C‐H···Br, O···Br, Br···π and van der Waals contacts. Although the primary and secondary ligands in the Zn (II) complex series 1 – 6 carry different substituents at the periphery (X = H, Me, Cl, Br for (HL^XASA)^? and R = H, Me for 4‐Py‐R), five of the crystal structures were isostructural. Additionally, the antimicrobial activity of the pro‐ligands H₂L^XASA and their Zn (II), Cu (II) and Cd (II) compounds were studied in a comparative manner, showing high sensitivity (IZD ≥ 20) against Bacillus subtilis.     

In vitro anti‐proliferative and in silico docking studies of heteroleptic copper(II) complexes of pyridazine‐based ligands and ciprofloxacin

Three heteroleptic copper(II) complexes of the type [Cu(L^1–3)(cf)(ClO₄)] ( 1 – 3 ), where cf = ciprofloxacin, have been synthesized using pyridazine‐based ligands 3‐chloro‐6‐(salicylidenehydrazinyl)pyridazine (HL¹), 3‐chloro‐6‐(4‐diethylaminosalicylidenehydrazinyl)pyridazine (HL²) and 3‐chloro‐6‐(5‐bromosalicylidenehydrazinyl)pyridazine (HL³). Electronic spectral data and magnetic moment values suggest octahedral geometry for the synthesized copper(II) complexes. Electrochemical data of the copper(II) complexes present an irreversible one‐electron reduction wave in the cathodic potential region (E_pc) between ?0.631 and ?0.670 V. Frontier molecular orbital calculations were carried out, and the obtained low‐energy gap supports the bio‐efficacy of the complexes. All the complexes were screened for their in vitro cytotoxicity activity against three human cancerous (breast adenocarcinoma (MCF‐7), hepatoma (HepG‐2) and cervical (HeLa)) and one non‐cancerous (non‐tumorigenic human dermal fibroblast (NHDF)) cell lines using MTT assay, in which complex 2 exhibited higher activity. The apoptosis induction by the complexes was analysed using the Hoechst dye staining method with MCF‐7 cell line, which indicates higher apoptotic activity of complex 2 . A molecular docking study was carried out to ascertain the binding affinity of the synthesized heteroleptic copper(II) complexes with phosphoinositide 3‐kinase gamma (PI3Kγ) receptor.     

Platinum(II) Mixed Ligand Complexes with Thiourea Derivatives,Dimethyl Sulphoxide and Chloride: Syntheses,Molecular Structures,and ESCA Data

The platinum(II) mixed ligand complexes [PtCl(L^1‐6)(dmso)] with six differently substituted thiourea derivatives HL, R₂NC(S)NHC(O)R′ (R = Et, R′ = p‐O₂N‐Ph: HL¹; R = Ph, R′ = p‐O₂N‐Ph: HL²; R = R′ = Ph: HL³; R = Et, R′ = o‐Cl‐Ph: HL⁴; R₂N = EtOC(O)N(CH₂CH₂)₂N, R′ = Ph: HL⁵) and Et₂NC(S)N=CNH‐1‐Naph (HL⁶), as well as the bis(benzoylthioureato‐κO, κS)‐platinum(II) complexes [Pt(L^{1, 2})₂] have been synthesized and characterized by elemental analysis, IR, FAB(+)‐MS, ¹H‐NMR, ¹³C‐NMR, as well as X‐ray structure analysis ([PtCl(L¹)(dmso)] and [PtCl(L^{3, 4})(dmso)]) and ESCA ([PtCl(L^{1, 2})(dmso)] and [Pt(L^{1, 2})₂]). The mixed ligand complexes [PtCl(L)(dmso)] have a nearly square‐planar coordination at the platinum atoms. After deprotonation, the thiourea derivatives coordinate bidentately via O and S, DMSO bonds monodentately to the Pt^II atom via S atom in a cis arrangement with respect to the thiocarbonyl sulphur atom. The Pt—S‐bonds to the DMSO are significant shorter than those to the thiocarbonyl‐S atom. In comparison with the unsubstituted case, electron withdrawing substituents at the phenyl group of the benzoyl moiety of the thioureate (p‐NO₂, o‐Cl) cause a significant elongation of the Pt—S(dmso)‐bond trans arranged to the benzoyl‐O—Pt‐bond. The ESCA data confirm the found coordination and bonding conditions. The Pt 4f_7/2 electron binding energies of the complexes [PtCl(L^{1, 2})(dmso)] are higher than those of the bis(benzoylthioureato)‐complexes [Pt(L^{1, 2})₂]. This may indicate a withdrawal of electron density from platinum(II) caused by the DMSO ligands.     

Rare‐Earth‐Metal Alkylaluminates Supported by N‐Donor‐Functionalized Cyclopentadienyl Ligands: C?H Bond Activation and Performance in Isoprene Polymerization

Homoleptic tetramethylaluminate complexes [Ln(AlMe₄)₃] (Ln=La, Nd, Y) reacted with HCp^NMe2 (Cp^NMe2=1‐[2‐(N,N‐dimethylamino)‐ethyl]‐2,3,4,5‐tetramethyl‐cyclopentadienyl) in pentane at ?35 °C to yield half‐sandwich rare‐earth‐metal complexes, [{C₅Me₄CH₂CH₂NMe₂(AlMe₃)}Ln(AlMe₄)₂]. Removal of the N‐donor‐coordinated trimethylaluminum group through donor displacement by using an equimolar amount of Et₂O at ambient temperature only generated the methylene‐bridged complexes [{C₅Me₄CH₂CH₂NMe(μ‐CH₂)AlMe₃}Ln(AlMe₄)] with the larger rare‐earth‐metal ions lanthanum and neodymium. X‐ray diffraction analysis revealed the formation of isostructural complexes and the C? H bond activation of one aminomethyl group. The formation of Ln(μ‐CH₂)Al moieties was further corroborated by ¹³C and ¹H‐¹³C HSQC NMR spectroscopy. In the case of the largest metal center, lanthanum, this C? H bond activation could be suppressed at ?35 °C, thereby leading to the isolation of [(Cp^NMe2)La(AlMe₄)₂], which contains an intramolecularly coordinated amino group. The protonolysis reaction of [Ln(AlMe₄)₃] (Ln=La, Nd) with the anilinyl‐substituted cyclopentadiene HCp^AMe2 (Cp^AMe2=1‐[1‐(N,N‐dimethylanilinyl)]‐2,3,4,5‐tetramethylcyclopentadienyl) at ?35 °C generated the half‐sandwich complexes [(Cp^AMe2)Ln(AlMe₄)₂]. Heating these complexes at 75 °C resulted in the C? H bond activation of one of the anilinium methyl groups and the formation of [{C₅Me₄C₆H₄NMe(μ‐CH₂)AlMe₃}Ln(AlMe₄)] through the elimination of methane. In contrast, the smaller yttrium metal center already gave the aminomethyl‐activated complex at ?35 °C, which is isostructural to those of lanthanum and neodymium. The performance of complexes [{C₅Me₄CH₂CH₂NMe(μ‐CH₂)AlMe₃}‐ Ln(AlMe₄)], [(Cp^AMe2)Ln(AlMe₄)₂], and [{C₅Me₄C₆H₄NMe(μ‐CH₂)AlMe₃}Ln(AlMe₄)] in the polymerization of isoprene was investigated upon activation with [Ph₃C][B(C₆F₅)₄], [PhNMe₂H][B(C₆F₅)₄], and B(C₆F₅)₃. The highest stereoselectivities were observed with the lanthanum‐based pre‐catalysts, thereby producing polyisoprene with trans‐1,4 contents of up to 95.6 %. Narrow molecular‐weight distributions (M_w/M_n<1.1) and complete consumption of the monomer suggested a living‐polymerization mechanism.     

New complexes of Ni(II) and Cu(II) with Schiff bases functionalised with 1,3,4-thiadiazole: spectral,magnetic, biological and thermal characterisation

Schiff bases obtained by the condensation of 2-amino-5-mercapto-1,3,4-thiadiazole with 2,4-pentandione or 1-phenyl-1,3-butandione were synthesized and characterized in order to obtain polydentate ligands HL¹ and HL², respectively. The complexes with these ligands of the type M(L)Cl·nH₂O [(1) M:Ni, L:L¹, n = 0.5; (3) M:Ni, L:L², n = 0.5]; [(2) M:Cu, L:L¹, n = 1; (4) M:Cu, L:L², n = 0] were also synthesized and characterized. The modifications evidenced in IR spectra of complexes were correlated with the presence of monodeprotonate Schiff bases. The electronic spectra display the characteristic pattern of square-planar stereochemistry. The in vitro qualitative and quantitative antimicrobial activity assays showed that the new complexes exhibited variable antimicrobial activity. The thermal analyses have evidenced the thermal intervals of stability and also the thermodynamic effects that accompany them. Schiff bases and complexes have a similar thermal behaviour. Processes as water elimination, melting, chloride anion removal as well as oxidative degradation of the organic ligands were observed.     

Copper(II), nickel(II) and cobalt(II) complexes of 5,5-dimethylcyclohexane-1,2,3-trione-2-arylhydrazones

Summary Copper(II), nickel(II) and cobalt(II) perchlorate complexes of 5,5-dimethylcyclohexane-1,2,3-trione-2-(p-nitrophenyl-hydrazone) (HL¹), 5,5-dimethyl-cyclohexane-1,2,3-trione-2-(p-chlorophenylhydrazone) (HL²), 5,5-dimethylcyclohexane-1,2,3-trione-2-(o-chlorophenylhydrazone) (HL⁴), 5,5-dimethylcyclohexane-1,2,3-trione-2-(o-methylphenyl-hydrazone) (HL⁵) and 5,5-dimethylcyclohexane-1,2,3-trione-2-(m-methylphenylhydrazone) (HL⁶) have been prepared, and characterized using analytical, spectral and magnetic measurements. The data reveal that the reaction of Cu(ClO₄)₂ (1 mol) in EtOH, with all ligands, produces complexes of the type CuL(ClO₄)(H₂O).nH₂O. Nickel(II) and cobalt(II) perchlorates react only with HL¹ and HL² to produce the complexes ML(ClO₄)(H₂O)₃ (where M = Ni^II, L = L^– and L², M = Co^II, L = L¹) and Co(HL₂)₂-(ClO₄)₂.2H₂O. The spectral data show that the ligands behave as monobasic bidentate in their azo forms, except HL² which reacts with cobalt(II) as a neutral bidentate ligand in its hydrazone form.     

Synthesis and structure of para‐toluene sulfonamide lanthanide complexes and their application in the polymerization of ε‐caprolactone

A series of para‐toluene sulfonamide ligands [TsNHPr‐i( HL ₁ ), TsNHBu‐t( HL ₂ ), TsNHPh( HL ₃ ), TsNHPhMe‐p( HL ₄ ), TsNHPhOMe‐p( HL ₅ )] were synthesized by amidation using para‐toluene sulfonyl chloride reacting with different primary amines. A series of homoleptic lanthanide complexes (Ln L₃, 1–10) (Ln = La, L = L₁ ( 1 ), Ln = Gd, L = L₂ ( 2 ), Ln = La, L = L₂ ( 3 ), Ln = Gd, L = L₂( 4 ), Ln = La, L = L₃ ( 5 ), Ln = Gd, L = L₃ ( 6 ), Ln = La, L = L₄ ( 7 ), Ln = Gd, L = L₄( 8 ), Ln = La, L = L₅ ( 9 ), Ln = Gd, L = L₅ ( 10 )) were prepared by amine elimination reactions of the ligands with Ln[N(SiMe₃)₂]₃ (Ln = La, Gd). Complexes 1 , 3 , 5 , 7 and 9 were all characterized by NMR spectra, and the structures of complex 3 was determined by single‐crystal X‐ray diffraction. Complex 3 crystallizes a binuclear cluster, consisting of two La³⁺ and six (TsNBu‐t)⁻ anions. Three (TsNBu‐t)⁻ anions are chelating to each La³⁺ as bidentate model with O and N forming three‐membered chelate rings; one of three anions is bridging to another La³⁺ via oxygen. All complexes were characterized using elemental analysis and infrared spectra. The catalytic properties of complexes 1–10 for the ring‐opening polymerization of ε‐caprolactone were studied and the results showed that all complexes are efficient initiators for this ring‐opening polymerization reaction.     

Oxidation of sulfides including DBT using a new vanadyl complex of a non‐innocent o‐aminophenol benzoxazole based ligand

Reaction of a non‐innocent o‐aminophenol benzoxazole based ligand HL^BAP with VOCl₃ afforded a vanadyl complex, VOL^BIS (SQ), in which SQ is a 2,4‐di‐tert‐butylsemiquinone produced from hydrolysis of HL^BAP. The crystal structure of VOL^BIS (SQ) exhibits an octahedral geometry with the VO²⁺ center coordinated by two nitrogen and one oxygen atoms of L^BAP and two oxygen atoms of SQ. Electrochemical studies showed quasi‐reversible metal‐centered reduction and ligand‐centered oxidation of complex. The magnetic moment of VOL^BIS (SQ) is consistent with the spin‐only value expected for S = 1/2 system. The neutral species of VOL^BIS (SQ) is EPR active, which is consistent with a paramagnetic electronic ground state (S = 1/2). This result is in accordance with the vanadyl (IV) moiety surrounded by tridentate iminobenzosemiquinonate anion radical (HL^BIS)^?‐ and benzosemiquinone ligand (SQ)^?. The theoretical calculations confirm the experimental results. Furthermore, we present the optimal conditions for maximum efficiency of sulfide oxidation for oxidative desulfurization with hydrogen peroxide and 6 times reusability of catalyst for sulfoxidation of dibenzothiophene.     

Unveiling the binding interaction of zinc (II) complexes of homologous Schiff-base ligands on the surface of BSA protein: A combined experimental and theoretical approach

Four new zinc (II) complexes [Zn (HL¹H)Br₂] (1), [Zn (HL¹H)Cl₂] (2), [Zn₂(HL²)Br₃] (3), and [Zn (HL²)Cl] (4) have been synthesized by adopting template synthetic strategy and utilizing two homologous Schiff base ligands (H₂L¹ = 4-bromo-2-{[2-(2-hydroxyethylamino)-ethylimino]-methyl}-6-methoxyphenol, H₂L² = 4-bromo-2-{[3-(2-hydroxyethylamino)propylimino]methyl}-6-methoxyphenol), differing in one -CH₂- unit in the ligating backbone, by adopting template synthetic strategy. All the complexes have been characterized by single crystal X-ray diffraction analysis as well as by other routine physicochemical techniques. Ligand mediated structural variations have been observed and rationalized by density functional theoretical (DFT) calculations. Interaction of the complexes 1–4 with Bovine Serum Albumin protein (BSA) has been studied by different spectroscopic techniques. A complete thermodynamic profile (ΔH^o, ΔS^o and ΔG^o) was evaluated initially from the change in absorption and fluorescence spectra upon addition of BSA to the complexes. Appreciable binding constant values in the range ~ 0.94–4.51 × 10⁴ M⁻¹ indicate efficient binding tendency of the complexes to BSA with the sequence 1 ≅ 2 > 3 ≅ 4. Circular dichroism (CD), isothermal calorimetric titration experiments, molecular docking and molecular dynamics have been performed to gain deep insight into the binding regions of complex 1 to BSA. Experimental evidences suggest an interaction of zinc complexes at the surface of BSA protein and this particular binding has been exploited to determine unknown concentration of BSA protein. For this purpose complex 1 was explored as a BSA protein quantification tool.     

Synthesis,structural characterization and substituent effects of two copper(II) complexes with benzaldehyde ortho-oxime ligands

Two new Cu(II) complexes, [Cu(L¹)₂] (1) and [Cu(L²)₂] (2) (HL¹ = (E)-3-bromo-5-chloro-2-hydroxy benzaldehyde O-methyl oxime; HL² = (E)-3-bromo-5-chloro-2-hydroxy benzaldehyde O-ethyl oxime), have been synthesized and characterized by physicochemical and spectroscopic methods. X-ray crystallographic analyses show that complexes 1 and 2 have similar structures, consisting of one Cu(II) atom and two L⁻ units. In both complexes, the Cu(II) atom, lying on an inversion center, is four-coordinated in a trans-CuN₂O₂ square-planar geometry by two phenolate O and two oxime N atoms from two symmetry-related N,O-bidentate oxime ligands. Moreover, both complexes form an infinite three-dimensional supramolecular structure involving intermolecular C–H···Br hydrogen bonds and π···π stacking interactions between the metal chelate rings and aromatic rings. Substituent effects in the two complexes are discussed.     

Altering the Activity of Catechol Oxidase Model Compounds by Electronic Influence on the Copper Core

The catecholase activity of the dicopper(II) complexes [Cu₂(L¹)(μ‐OCH₃)(NCCH₃)₂](PF₆)₂·H₂O·CH₃CN ( 1 ), [Cu₂(L²)(μ‐OH)(MeOH)(NCCH₃)](BF₄)₂ ( 2 ), [Cu₂(L³)(μ‐OMe)(NCCH₃)₂](BF₄)₂·2CH₃CN·H₂O ( 3 ), [Cu₂(L²)(μ‐OAc)₂]BF₄·H₂O ( 4 ), [Cu₂(L⁴)(μ‐OAc)₂]ClO₄ ( 5 ) and [Cu₂(L⁵)(μ‐OMe)(NCCH₃)₃(OH₂)](ClO₄)₂·2CH₃OH·CH₃CN ( 6 ) consisting of varying para‐substituted phenol ligands HL¹ = 4‐trifluoromethyl‐2,6‐bis((4‐methylpiperazin‐1‐yl)methyl)phenol, HL² = 4‐bromo‐2,6‐bis((4‐methyl‐1,4‐diazepan‐1‐yl)methyl)phenol, HL³ = 4‐bromo‐2‐((4‐methyl‐1,4‐diazepan‐1‐yl)methyl)‐6‐((4‐methylpiperazin‐1‐yl)methyl)phenol, HL⁴ = 2,6‐bis((4‐methylpiperazin‐1‐yl)methyl)‐4‐nitrophenol and HL⁵ = 4‐tert‐butyl‐2,6‐bis((4‐methylpiperazin‐1‐yl)methyl)phenol was studied. The main difference within the six complexes lies in the individual copper–copper separation that is enforced by the chelating side arms of the phenolate ligand entity and more importantly in the exogenous bridging solvent, hydroxide, methanolate or acetate ions. The distance between the copper cores varies from 2.94Å in 1 to 3.29Å in 5 . The catalytic activity of the complexes 1 – 6 towards the oxidation of 3,5‐di‐tert‐butylcatechol was determined spectrophotometrically by monitoring the increase of the 3,5–di‐tert‐butylquinone characteristic absorption band at about 400 nm over time saturated with O₂. The complexes are able to oxidize the substrate 3,5‐di‐tert‐butylcatechol to the corresponding o‐quinone with distinct catalytic activity (k_cat between 92 h^?1 and 189 h^?1), with an order of decreasing activity 6 > 5 > 1 , 2 , 4 ≥ 3 . A kinetic treatment of the data based on the Michaelis‐Menten approach was applied. A correlation of the catecholase activities with the variation of the para‐ substituents as well as other effects resulting from the copper core distances is discussed. [Cu₂(L⁵)(μ‐OMe)(NCCH₃)₃(OH)₂](ClO₄)₂·2CH₃OH·CH₃CN ( 6 ) exhibited the highest activity of the six complexes as a result of its high turnover rate.     

Green Synthesis of new Trizole Based Heterocyclic Amino Acids Ligands and their Transition Metal Complexes. Characterization,Kinetics, Antimicrobial and Docking Studies

Two novel amino acids imine ligands (H₂L₁ and H₂L₂) have been synthesized using green condensation reaction from 2‐[3‐Amino‐5‐(2‐hydroxy‐phenyl)‐5‐methyl‐1,5‐dihydro‐[1, 2, 4]triazol‐4‐yl]‐3‐(1H‐indol‐3‐yl)‐propionic acid with benzaldehyde/p‐flouro benzaldehyde (1:1 molar ratio) in the presence of lemon juice as a natural acidic catalyst in aqueous medium. Their transition metal complexes have been prepared in a molar ratio (1:1). Characterization of the ligands and complexes using elemental analysis, spectroscopic studies, ¹HNMR, ¹³CNMR, and thermal analysis has been reported. E*, ΔH*, ΔS* and ΔG* thermodynamic parameters, were calculated to throw more light on the nature of changes accompanying the thermal decomposition process of these complexes. The molar conductance measurement of metal complexes showed nonelectrolyte behavior. The metal complexes of the two ligands have tetrahedral geometry with a general molecular structure [M(H₂L)X_n], where [(M = Mn (II), Co (II), Cu (II) and Zn (II), X = Cl, n = 2]; M = VO (II), X = SO₄, n = 1] for H₂L₁. [M = Co (II), Cu (II), Zn (II)] for H₂L₂. Antibacterial activity of the complexes against (Bacillis subtilis, Micrococcus luteus, Escherichia coli), also antifungal activity against (Aspergillus niger, Candida Glabarta, Saccharomyces cerevisiae) have been screened. The results showed that all complexes have antimicrobial activity higher than free ligands. Molecular docking studies results showed that, all the synthesized compounds having minimum binding energy and have good affinity toward the active pocket, thus, they may be considered as good inhibitor of targeting PDB code: 1SC7 (Human DNA Topo‐isomerase I).     

Dimethyltin(IV) complexes derived from hydroxamic acid and acylhydrazone ligands: Synthesis,DNA/bovine serum albumin interaction and cytotoxicity

Two novel dimethyltin(IV) complexes, Me₂SnL¹(PyCOO)(MeOH) ( 1 ) and Me₂SnL² ( 2 ) (HL¹ = 4‐pyridinehydroxamic acid and H₂L² = 2‐hydroxy‐N′‐[(2‐hydroxy‐5‐chlorophenyl)methylidene]benzoylhydrazone), were synthesized and characterized using elemental analyses, Fourier transform infrared and NMR (¹H, ¹³C) spectroscopies and single‐crystal X‐ray diffraction. In complex 1 the geometry around the tin atom is a six‐coordinated distorted octahedral configuration, while complex 2 exhibits five‐coordinated distorted trigonal bipyramid geometry. Preliminary in vitro cytotoxicity studies with two human cancer cell lines (HeLa and A549) using MTT assay show that complex 1 is more potent than complex 2 . The interactions of the two complexes with calf thymus DNA and bovine serum albumin were also investigated using UV–visible absorption spectral, thermal denaturation and viscosity measurements and docking analysis. Investigations indicate that the structures of the mixed ligands play an important role in the properties of the dimethyltin(IV) complexes, and, to some extent, the antitumor activities of the complexes are partly related to interactions with DNA and some proteins in cancer cells.     

Four‐, five‐ and six‐coordinated transition metal complexes based on naphthalimide Schiff base ligands: Synthesis,crystal structure and properties

Two bidentate Schiff base ligands (HL¹ = N‐n‐butyl‐4‐[(E)‐2‐(((2‐aminoethyl)imino)methyl)phenol]‐1,8‐naphthalimide; and HL² = N‐n‐butyl‐4‐[(E)‐2‐(((2‐aminoethyl)imino)methyl)‐6‐methoxyphenol]‐1,8‐naphthalimide) with their metal complexes [Cu(L¹)₂] ( 1 ), [Zn(L¹)₂(Py)]₂?H₂O ( 2 ) and [Ni(L²)₂(DMF)₂] ( 3 ) have been synthesized and characterized. Single‐crystal X‐ray structure analysis reveals that complex 1 has a four‐coordinated square geometry, while complex 2 is a five‐coordinated square pyramidal structure and complex 3 is a distorted six‐coordinated octahedral structure. Cyclic voltammograms of 1 indicate an irreversible Cu²⁺/Cu⁺ couple. In vitro antioxidant activity assay demonstrates that the ligands and the two complexes 1 and 3 display high scavenging activity against hydroxyl (HO^?) and superoxide (O₂^??) radicals. Moreover, the fluorescence properties of the ligands and complexes 1 – 3 were studied in the solid state. Metal‐mediated enhancement is observed in 2 , whereas metal‐mediated fluorescence quenching occurs with 1 and 3 .     

Synthesis, structural characterization and thermal properties of three copper(II) complexes based on aryl hydrazide ligands

The thiosemicarbazide and hydrazide Cu(II) complexes, [Cu₃L₂¹(py)₄Cl₂] (1), [Cu(HL²)py] (2) and [Cu(HL³)py] (3), (H₂L¹ = 1-picolinoylthiosemicarbazide, H₃L² = N′-(2-hydroxybenzylidene)-3-hydroxy-2-naphthohydrazide, H₃L³ = 2-hydroxy-N′-((2-hydroxy-naphthalen-1-yl)methylene)benzohydrazide) have been prepared and characterized through physicochemical and spectroscopic methods as well as X-ray crystallography. Complex 1 has a centrosymmetric structure with –N–N– bridged Cu₃ skeleton. Neighboring molecules are linked into a 3D supermolecular framework by π–π stacking interactions, N–H···Cl and C–H···Cl hydrogen bonds. Complexes 2 and 3 have similar planar structures but different dimers formed by concomitant Cu···N and Cu···O interactions, respectively. Solvent accessible voids with a volume of 391 ?³ are included in the structure of complex 2, indicating that this complex is a potential host candidate. Thermogravimetric analysis shows that the three complexes are stable up to 100 °C.