Nanocomposite with Polypyrrole Encapsulated within SBA‐15 Mesoporous Silica: Preparation and Its Electrochemical Application

The nanocomposite with polypyrrole (PPy) confined in ordered mesoporous silica SBA‐15 channels was synthesized by in situ electropolymerization. X‐ray diffraction, scanning electron microscopy, transmission electron microscopy, N₂ adsorption/desorption, and FT‐IR studies indicated that the nanocomposite has the well‐ordered hexagonal structures and PPy was in situ polymerized into the channels instead of the outer surface of SBA‐15. Furthermore, the PPy/SBA‐15 nanocomposite was used as an electrode modifier. We found that the nanocomposite‐modified electrode exhibited good electrocatalytic activities for hydroquinone oxidation where PPy chains could facilitate the electron transfer between molecular sieves and electrode surface. Three dihydroxybenzene isomers (hydroquinone, catechol and resorcinol) have been successfully detected at PPy/SBA‐15 modified electrode by preconcentration of the analyte.     

Preparation and characterization of a silica‐based magnetic nanocomposite and its application as a recoverable catalyst for the one‐pot multicomponent synthesis of quinazolinone derivatives

An environmentally benign magnetic silica‐based nanocomposite (Fe₃O₄/SBA‐15) as a heterogeneous nanocatalyst was prepared and characterized using Fourier transform infrared and ultraviolet–visible diffuse reflectance spectroscopies, scanning electron microscopy, X‐ray diffraction, vibrating sample magnetometry and Brunauer–Emmett–Teller multilayer nitrogen adsorption. Its catalytic activity was investigated for the one‐pot multicomponent synthesis of 2,3‐dihydroquinazolin‐4(1H)‐ones starting from isatoic anhydride, ammonium acetate and various aldehydes under mild reaction conditions and easy work‐up procedure in refluxing ethanol with good yields. The nanocatalyst can be recovered easily and reused several times without significant loss of catalytic activity. Copyright © 2015 John Wiley & Sons, Ltd.     

Planting of bis(1,5‐cyclooctadiene) nickel upon silica to harvest NiO (<5 nm) nanoparticles in a silica matrix

Bis(1,5‐cyclooctadiene) nickel [Ni(COD)₂] was employed as a nickel precursor to prepare nickel oxide nanoparticles upon high‐surface‐area mesoporous silica. Under protection of argon, Ni(COD)₂ was dissolved in tetrahydrofuran (THF) to react with surface silanols of mesoporous silica SBA‐15, which formed a black powder after completion of the surface reaction. Calcination of the powder produced ultrafine NiO inside the mesoporous silica matrix, which was evidenced by X‐ray diffraction, N₂ adsorption–desorption, transmission electron microscopy and thermogravimetric analysis. The thermogravimetric analysis suggests that NiO formation is a result of surface nickel species calcination, whereas structural characterization clearly show that NiO nanoparticles of <5 nm are evenly distributed inside the silica SBA‐15 matrix and mesoporosity is well preserved upon calcinations and NiO formation. The surface reaction between Ni(COD)₂ and surface silanols was found for the first time, and the method used here may be extended conveniently to prepare other metal oxide nanoparticles upon high‐surface‐area supports as well. Copyright © 2005 John Wiley & Sons, Ltd.     

Cobalt(II) acetylacetonate complex immobilized on aminosilane‐modified SBA‐15 as an efficient catalyst for epoxidation of trans‐stilbene with molecular oxygen

From environmental and economic points of view, it is highly desirable to develop a clean and efficient catalytic process to produce epoxides. An attractive approach is to use a solid, recyclable catalyst and molecular oxygen as the oxidant without any sacrificial reductant or other additives. Nonetheless, the catalysts reported up to now still cannot balance catalytic activity with epoxide selectivity. It is of great importance to explore novel catalysts with both high activity and selectivity for the epoxidation of olefins. In this work, cobalt(II) acetylacetonate (Co(acac)₂) was covalently bonded to the silica surface of SBA‐15 molecular sieve by multi‐step grafting using 3‐aminopropytrimethoxysilane (APTS) as coupling agent. Characterizations with nitrogen physisorption, X‐ray diffraction, transmission electron microscopy, Fourier transform infrared spectroscopy and thermogravimetric analysis suggested that the metal complex was successfully immobilized on the aminosilane‐modified SBA‐15 surface and the channel structure remained intact. The synthesized Co(acac)₂APTS@SBA‐15 catalyst was used in the epoxidation of trans‐stilbene (TS) with molecular oxygen. Compared to the sample prepared by the impregnation method as well as Co(acac)₂ solutions under the same reaction conditions, the Co(acac)₂ immobilized catalyst exhibited remarkably higher TS conversion and trans‐stilbene oxide (TSO) selectivity. An increase in TS conversion with Co content was observed when the Co loading was lower than 0.70% and the 0.70Co(acac)₂APTS@SBA‐15 sample exhibited the best catalytic performance. Up to 50.1% of TS conversion could be achieved within 6 h, affording TSO selectivity as high as 96.7%. The superior catalytic performance of this particular catalyst is attributed to the high activity of the immobilized Co(acac)₂ species on SBA‐15. Copyright © 2016 John Wiley & Sons, Ltd.     

Composites of poly(L‐lactide‐trimethylene carbonate‐glycolide) and surface modified SBA‐15 as bone repair material

This work aims to develop novel composites from a poly(L ‐lactide‐co‐trimethylene carbonate‐co‐glycolide) (PLTG) terpolymer and mesoporous silica (SBA‐15) nanofillers surface modified by post‐synthetic functionalization. SBA‐15 first reacts with a silane coupling agent, γ‐aminopropyl‐trimethoxysilane to introduce ammonium group. PLLA chains were then grafted on the surface of SBA‐15 through ammonium initiated ring‐opening polymerization of L ‐lactide. Composites were prepared via solution mixing of PLTG terpolymer and surface modified SBA‐15. The structures and properties of pure SBA‐15, γ‐aminopropyl‐trimethoxysilane modified SBA‐15 (H₂N‐SBA‐15), PLLA modified SBA‐15 (PLLA‐NH‐SBA‐15), and PLTG/PLLA‐NH‐SBA‐15 composites were characterized by Fourier transform infrared spectroscopy, thermogravimetric analysis, X‐ray diffraction, scanning electron microscopy, energy‐dispersive X‐ray spectroscopy, transmission electron microscopy, N₂ adsorption‐desorption, differential scanning calorimetry, contact angle measurement, and mechanical testing. The results demonstrated that PLLA chains were successfully grafted onto the surface of SBA‐15 with grafting amounts up to 16 wt.%. The PLTG/PLLA‐NH‐SBA‐15 composites exhibit good mechanical properties. The tensile strength, Young's modulus, and elongation at break of the composite containing 5 wt.% of PLLA‐NH‐SBA‐15 were 39.9 MPa, 1.3 GPa, and 273.6%, respectively, which were all higher than those of neat PLTG or of the composite containing 5 wt.% of pure SBA‐15. Cytocompatibility tests showed that the composites present very low cytotoxicity.     

Catalytic Hydrodechlorination of 1,2,4,5‐Tetrachlorobenzene over Various Supports Loaded Palladium Catalysts

Water pollution by polychlorinated aromatic hydrocarbons has always been a global issue. In this work, we reported a synthesis of supported palladium catalysts Pd/C, Pd/CeO₂, Pd/SBA‐15, Pd/ZrO₂,Pd/SiO₂, and Pd/Al₂O₃ as well as their catalytic activities on hydrodechlorination (HDC) of 1,2,4,5‐tetrachlorobenzene (TeCB). These Pd catalysts were characterized by Brunauer‐Emmett‐Teller (BET) specific surface area, Transmission electron microscopy (TEM), X‐ray diffraction (XRD), energy Dispersive X‐ray Fluorescence (EDXRF), CO‐chemisorption, and H2‐temperature programmed reduction (H2‐TPR) analysis. Pd/C, Pd/CeO₂ and Pd/SBA‐15 catalysts showed relatively high catalytic activities. The catalytic activities were associated with dispersion of Pd, metal surface area, and reaction temperature, etc.     

Periodic mesoporous silica‐supported Ni(II) organometallic complex as an active and reusable nanocatalyst for water‐medium Sonogashira coupling reaction

Phenyl‐bridged periodic mesoporous organosilicas (PMOs) functionalized with diphenylphosphino (PPh₂‐) ligands were synthesized via a surfactant‐directed self‐assembly approach, and were used as a support to immobilize Ni(II) organometallic complex by coordination interaction. In comparison with Ni‐PPh₂‐SBA‐15 and Ni‐PPh₂‐PMOs(Et) catalysts, the as‐prepared Ni‐PPh₂‐PMOs(Ph) exhibited superior catalytic reactivity and selectivity in water‐medium Sonogashira reaction. A control experiment demonstrated that its high activity could be attributed to the high dispersion of Ni(II) active sites and ordered mesopore channels, which effectively diminished diffusion limitation. Meanwhile, the phenyl organic groups in the support wall enhanced surface hydrophobicity, which promoted the adsorption for organic reactant molecules. Moreover, it displayed almost the same catalytic efficiency with the corresponding homogeneous Ni(PPh₃)₂Cl₂ catalyst and could be used repetitively, which was considered as a more environmentally friendly catalytic process since it simultaneously avoided the use of noble metal active species and toxic organic solvents. Copyright © 2013 John Wiley & Sons, Ltd.     

N‐heterocyclic carbene–palladium(II) complex supported on magnetic mesoporous silica for Heck cross‐coupling reaction

Magnetic mesoporous silica was prepared via embedding magnetite nanoparticles between channels of mesoporous silica (SBA‐15). The prepared composite (Fe₃O₄@SiO₂‐SBA) was then reacted with 3‐chloropropyltriethoxysilane, sodium imidazolide and 2‐bromopyridine to give 3‐(pyridin‐2‐yl)‐1H‐imidazol‐3‐iumpropyl‐functionalized Fe₃O₄@SiO₂‐SBA as a supported pincer ligand for Pd(II). The functionalized magnetic mesoporous silica was further reacted with [PdCl₂(SMe₂)₂] to produce a supported N‐heterocyclic carbene–Pd(II) complex. The obtained catalyst was characterized using Fourier transform infrared spectroscopy, scanning electron microscopy, energy‐dispersive X‐ray analysis, vibrating sample magnetometry, Brunauer–Emmett–Teller surface area measurement and X‐ray diffraction. The amount of the loaded complex was 80.3 mg g^?1, as calculated through thermogravimetric analysis. The formation of the ordered mesoporous structure of SBA‐15 was confirmed using low‐angle X‐ray diffraction and transmission electron microscopy. Also, X‐ray photoelectron spectroscopy confirmed the presence of the Pd(II) complex on the magnetic support. The prepared magnetic catalyst was then effectively used in the coupling reaction of olefins with aryl halides, i.e. the Heck reaction, in the presence of a base. The reaction parameters, such as solvent, base, temperature, amount of catalyst and reactant ratio, were optimized by choosing the coupling reaction of 1‐bromonaphthalene and styrene as a model Heck reaction. N‐Methylpyrrolidone as solvent, 0.25 mol% catalyst, K₂CO₃ as base, reaction temperature of 120°C and ultrasonication of the catalyst for 10 min before use provided the best conditions for the Heck cross‐coupling reaction. The best results were observed for aryl bromides and iodides while aryl chlorides were found to be less reactive. The catalyst exhibited noticeable stability and reusability.     

Synthesis and Characterization of Polyaniline/Mesoporous SBA‐15 Nanocomposite

Mesoporous silica SBA‐15 with conducting polyaniline inside the pore channels was synthesized and nanocomposite formation was confirmed by means of X‐ray diffraction, transmission electron microscopy and via an N₂ adsorption isotherm. The nanocomposite was subsequently used as a dispersed phase in electrorheological (ER) fluids, and the ER effect has been demonstrated for the first time using a rotational rheometer with high voltage generator.     

Adsorption of aqueous Hg (II) by a novel poly(aniline‐co‐o‐aminophenol)/mesoporous silica SBA‐15 composite

A novel poly(aniline‐co‐o‐aminophenol) (PAOA)/mesoporous silica SBA‐15 nanocomposite was synthesized and investigated for adsorption of Hg (II) from aqueous solutions of wide pH range. A chemical oxidation method was employed for polymerization of aniline and o‐aminophenol on an ordered SBA‐15 template to obtain a significantly enlarged BET surface area of the adsorbent. Efficiency study revealed that the PAOA/SBA‐15 could reach a maximum Hg (II) adsorption capacity of over 400 mg/g. Kinetic study showed that the Hg (II) adsorption by the PAOA/SBA‐15 fitted a pseudo‐second‐order kinetic model, indicating that the mercury adsorption process was predominantly controlled by chemical process. The results of this study also proved that the adsorbed Hg (II) could be effectively desorbed from the PAOA/SBA‐15 in 0.1M HCl and 5% sulfocarbonide solutions. Associated adsorption mechanism was also investigated by means of Fourier transform infrared (FTIR) and X‐ray photoelectron spectroscopy (XPS) techniques. Copyright © 2010 John Wiley & Sons, Ltd.     

Biosynthesis of Pd/MnO2 nanocomposite using Solanum melongena plant extract and its application for the one‐pot synthesis of 5‐substituted 1H‐tetrazoles from aryl halides

In this work, for the first time, Solanum melongena plant extract was used for the green synthesis of Pd/MnO₂ nanocomposite via reduction osf Pd(II) ions to Pd(0) and their immobilization on the surface of manganese dioxide (MnO₂) nanoparticles (NPs) as an effective support. The synthesized nanocomposite were characterized by various analytical techniques such as Fourier transform infrared (FT‐IR), X‐ray diffraction (XRD), transmission electron microscopy (TEM), field emission scanning electron microscopy (FESEM), energy dispersive X‐ray spectroscopy (EDS) and UV–Vis spectroscopy. The catalytic activity of Pd/MnO₂ nanocomposite was used as a heterogeneous catalyst for the one‐pot synthesis of 5‐substituted 1H‐tetrazoles from aryl halides containing various electron‐donating or electron‐withdrawing groups in the presence of K ₄ [Fe (CN) ₆ ] as non‐toxic cyanide source and sodium azide. The products were obtained in good yields via a simple methodology and easy work‐up. The nanocatalyst can be recycled and reused several times with no remarkable loss of activity.     

V‐N‐C catalysts anchored to mesoporous Al‐SBA‐15 with tailorable pore sizes for the synthesis of spirooxindole dihydroquinazolinones derivatives

Heterogeneous nanoscale catalyst was successfully synthesized via anchoring of V‐bis(2‐aminobenzamide) complex on the Al‐SBA‐15. This modified mesoporous was identified by several characterization techniques, such as X‐ray diffraction, field emission‐scanning electron microscopy, Fourier transform‐infrared, Brunauer–Emmett–Teller and transmission electron microscopy. V‐Bis(2‐aminobenzamide)@Al‐SBA‐15 was found to be an efficient heterogeneous catalyst for the rapid and desirable synthesis of various spirooxindole dihydroquinazolinones derivatives. In addition, the heterogeneous nanocatalyst was chemically stabilized in organic and aqueous solutions as well as can be expeditiously reused for at least seven cycles without a significant loss in catalytic activity.     

Dehydrogenation of Isobutane to Isobutene with Carbon Dioxide over SBA‐15‐Supported Chromia‐Ceria Catalysts

A series of SBA‐15‐supported chromia‐ceria catalysts with 3% Cr and 1%–5% Ce (3Cr‐Ce/SBA) were prepared using an incipient wetness impregnation method. The catalysts were characterized by XRD, N₂ adsorption, SEM, TEM‐EDX, Raman spectroscopy, UV–vis spectroscopy, XPS and H₂‐TPR, and their catalytic performance for isobutane dehydrogenation with CO₂ was tested. The addition of ceria to SBA‐15‐supported chromia improves the dispersion of chromium species. 3Cr‐Ce/SBA catalysts are more active than SBA‐15‐supported chromia (3Cr/SBA), which is due to a higher concentration of Cr⁶⁺ species present on the former catalysts. The 3Cr‐3Ce/SBA catalyst shows the highest activity, which gives 35.4% isobutane conversion and 89.6% isobutene selectivity at 570 °C after 10 min of the reaction.     

Palladium on magnetic Irish moss: A new nano‐biocatalyst for suzuki type cross‐coupling reactions

A novel heterogeneous magnetic palladium nano‐biocatalyst was designed by utilizing Irish moss, a family of sulfated polysaccharides extracted from algae, as a natural biopolymer. This magnetic Irish moss decorated with palladium (Pd–Fe₃O₄@IM) to form a biomagnetic catalytic system was synthesized and well characterized by FT–IR analysis, X‐ray powder diffraction, field emission scanning electron microscopy, energy‐dispersive X‐ray spectroscopy, atomic absorption spectroscopy and transmission electron microscopy. The catalyst was stable to air and moisture and displayed high catalytic activity in ligand‐free Suzuki–Miyaura cross‐coupling reactions conducted under green chemistry reaction conditions. The aromatic ketones are produced by the cross‐coupling reaction between acid chlorides and aryl boronic acid derivatives in high yields.     

Synthesis of TiO2–SiO2/polymer core–shell microspheres with a microphase‐inversion method

A novel microphase‐inversion method was proposed for the preparation of TiO₂–SiO₂/poly(methyl methacrylate) core–shell nanocomposite particles. The inorganic–polymer nanocomposites were first synthesized via a free‐radical copolymerization in a tetrahydrofuran solution, and the poor solvent was added slowly to induce the microphase separation of the nanocomposite and result in the formation of nanoparticles. The average particle sizes of the microspheres ranged from 70 to 1000 nm, depending on the reaction conditions. Transmission electron microscopy and scanning electron microscopy indicated a core–shell morphology for the obtained microspheres. Thermogravimetric analysis and X‐ray photoelectron spectroscopy measurements confirmed that the surface of the nanocomposite microspheres was polymer‐rich, and this was consistent with the core–shell morphology. The influence of the synthetic conditions, such as the inorganic composition and the content of the crosslinking monomer, on the particle properties was studied in detail. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3911–3920, 2006     

Bio‐assisted synthesized Ag(0) nanoparticles immobilized on SBA‐15/cyclodextrin nanosponge adduct: Efficient heterogeneous catalyst for the ultrasonic‐assisted synthesis of benzopyranopyrimidines

For the first time, SBA‐15/cyclodextrin nanosponge adduct was synthesized through reaction of Cl‐functionalized SBA‐15 and amine‐functionalized cyclodextrin nanosponge (CDNS). This adduct, which benefits from features of both SBA‐15 and CDNS, was then used for immobilization of Ag(0) nanoparticles which were prepared and capped using a bio‐based approach. Ag@CDNS–SBA‐15 was applied as a heterogeneous catalyst for promoting the three‐component reaction of benzaldehydes, 4‐hydroxycoumarin and urea or thiourea under ultrasonic irradiation to furnish benzopyranopyrimidines. The reaction variables were optimized using response surface methodology. The catalytic activity of Ag@CDNS–SBA‐15 was higher than those of Ag@CDNS, Ag@SBA‐15 and Ag@SBA‐15 + CDNS, confirming the contribution of both components to catalysis as well as a synergistic effect between CDNS and SBA‐15. The role of CDNS was to accommodate the substrates and bring them to the vicinity of the Ag(0) nanoparticles. Notably the catalyst was reusable and could be recovered and reused for up to four reaction runs with slight Ag(0) leaching and loss of catalytic activity.     

Epoxidation of cyclohexene with H2O2 over efficient water‐tolerant heterogeneous catalysts composed of mono‐substituted phosphotungstic acid on co‐functionalized SBA‐15

A series of Keggin‐type heteropolyacid‐based heterogeneous catalysts (Co‐/Fe‐/Cu‐POM‐octyl‐NH₃‐SBA‐15) were synthesized via immobilized transition metal mono‐ substituted phosphotungstic acids (Co‐/Fe‐/Cu‐POM) on octyl‐amino‐co‐functionalized mesoporous silica SBA‐15 (octyl‐NH₂‐SBA‐15). Characterization results indicated that Co‐/Fe‐/Cu‐POM units were highly dispersed in mesochannels of SBA‐15, and both types of Brønsted and Lewis acid sites existed in Co‐/Fe‐/Cu‐POM‐octyl‐NH₃‐SBA‐15 catalysts. Co‐POM‐octyl‐NH₃‐SBA‐15 catalyst showed excellent catalytic performance in H₂O₂‐mediated cyclohexene epoxidation with 83.8% of cyclohexene conversion, 92.8% of cyclohexene oxide selectivity, and 98/2 of epoxidation/allylic oxidation selectivity. The order of catalytic activity was Co‐POM‐octyl‐NH₃‐SBA‐15 > Fe‐POM‐octyl‐NH₃‐SBA‐15 > Cu‐POM‐octyl‐NH₃‐SBA‐15. In order to obtain insights into the role of ‐octyl moieties during catalysis, an octyl‐free catalyst (Co‐POM‐NH₃‐SBA‐15) was also synthesized. In comparison with Co‐POM‐NH₃‐SBA‐15, Co‐POM‐octyl‐NH₃‐SBA‐15 showed enhanced catalytic properties (viz. activity and selectivity) in cyclohexene epoxidation. Strong chemical bonding between ‐NH₃⁺ anchored on the surface of SBA‐15 and heteropolyanions resulted in excellent stability of Co‐POM‐octyl‐NH₃‐SBA‐15 catalyst, and it could be reused six times without considerable loss of activity.     

Cu(II) immobilized on mesoporous organosilica as an efficient and reusable nanocatalyst for one‐pot Biginelli reaction under solvent‐free conditions

Cu(II) immobilized on mesoporous organosilica nanoparticles (Cu²⁺@MSNs‐(CO₂^?)₂) has been synthesized, as a inorganic–organic nanohybrid catalyst, through a post‐grafting approach. Its characterization is carried out by Fourier transform infrared spectroscopy (FT‐IR), X‐ray diffraction (XRD), Scanning electron microscopy (SEM), Transmission electron microscopy (TEM), Energy dispersive X‐ray (EDX), Thermogravimetric/differential thermal analyses (TGA‐DTA), and Nitrogen adsorption–desorption analysis. Cu²⁺@MSNs‐(CO₂^?)₂ exhibits high catalytic activity in the Biginelli reaction for the synthesis of a diverse range of 3, 4‐dihydropyrimidin‐2(1H)‐ones, under mild conditions. The anchored Cu(II) could not leach out from the surface of the mesoporous catalyst during the reaction and it has been reused several times without appreciable loss in its catalytic activity.     

Tungstate supported mesoporous silica SBA‐15 with imidazolium framework as a hybrid nanocatalyst for selective oxidation of sulfides in the presence of hydrogen peroxide

In this work, a new heterogeneous catalyst (SBA‐15/Im/WO₄^2?) was prepared, and then its performance in the oxidation of organic sulfides was studied (using 30% H₂O₂ as green oxidant under neutral reaction conditions). This organic–inorganic hybrid mesoporous material was characterized by various techniques, such as FT‐IR, inductively coupled plasma, X‐ray powder diffraction, high‐resolution‐transmission electron microscopy, N₂ adsorption–desorption and thermogravimetric analysis. The catalyst was also applied to the selective oxidation of various sulfides. The hybrid catalyst was easily recovered, and was very stable and retained good activity for at least five successive runs without any additional activation. Moreover, there was no remarkable decrease in the activity and selectivity of the catalyst. The products could be easily isolated by just removing the solvent after filtering the catalyst. The yields of the catalytic productions through this catalyst were in the range from 75% to 97%.     

Nano palladium supported on high‐surface‐area metal–organic framework MIL‐101: an efficient catalyst for Sonogashira coupling of aryl and heteroaryl bromides with alkynes

Palladium nanoparticle‐incorporated metal–organic framework MIL‐101 (Pd/MIL‐101) was successfully synthesized and characterized using X‐ray diffraction, nitrogen physisorption, X‐ray photoelectron, UV–visible and infrared spectroscopies, and transmission electron microscopy. The characterization techniques confirmed high porosity and high surface area of MIL‐101 and high stability of nano‐size palladium particles. Pd/MIL‐101 nanocomposite was investigated for the Sonogashira cross‐coupling reaction of aryl and heteroaryl bromides with various alkynes under copper‐free conditions. The reusability of the catalyst was tested for up to four cycles without any significant loss in catalytic activity. Copyright © 2015 John Wiley & Sons, Ltd.