胺功能化的拟薄水铝石纳米颗粒负载的Mn-V复合物：高效的烯烃环氧化催化剂

将具有高比表面积和表面高度羟基化的拟薄水铝石纳米颗粒与3-(3甲氧基硅烷)-正丙胺进行共价结合而官能团化,再用于负载硫酸氧钒和六羰基钼络合物。所得样品采用红外光谱、粉末X射线衍射、热重-差热分析、X射线光电子能谱、元素分析、电感耦合等离子体和透射电镜等技术进行了表征,并用于顺-环辛烯的环氧化反应中,优化了诸如溶剂和氧化剂等反应条件。反应过程采用气-液色谱进行监测。重复使用实验表明,该纳米催化剂可重复使用多次,并保持顺-环辛烯接近完全环氧化。所得到的优化反应条件也成功用于其它的取代烯烃的环氧化反应中。     

Schiff base‐functionalized boehmite nanoparticle‐supported molybdenum and vanadium complexes: efficient catalysts for the epoxidation of alkenes

Boehmite nanoparticles, with high surface area and high degree of surface hydroxyl groups, were prepared via hydrothermal‐assisted sol–gel processing of aluminium 2‐butoxide. The produced powder was covalently functionalized with 3‐(trimethoxysilyl)propylamine, and then, in order to support vanadium oxosulfate and molybdenum hexacarbonyl complexes, all the terminal amine groups were changed to Schiff bases by refluxing with salicylaldehyde. These catalysts were applied in the epoxidation of cis‐cyclooctene and other olefins with tert‐BuOOH in CCl₄. The catalytic procedures for both catalysts were optimized for various parameters such as solvent and oxidant. Recycling experiments revealed that these heterogeneous nano‐catalysts could be repeatedly applied for the epoxidation of alkenes. Copyright © 2015 John Wiley & Sons, Ltd.     

Boehmite nano‐particles functionalized with silylpropylamine‐supported Keggin‐type heteropolyacids: Catalysts for epoxidation of alkenes

Boehmite nano‐particles with a high degree of surface hydroxyl groups were covalently functionalized by 3‐(trimethoxysilyl)‐propylamine to support H₃[PMo₁₂O₄₀], H₃[PW₁₂O₄₀], H₄[SiMo₁₂O₄₀] and H₄[SiW₁₂O₄₀] Keggin‐type heteropolyacids. After characterization of these catalysts by FT‐IR, powder X‐ray diffraction, TG/differential thermal analysis, CHN, inductively coupled plasma and transmission electron microscopy techniques, they were applied to the epoxidation of cis‐cycloocten. The progress of the reactions was investigated by gas–liquid chromatography, and the catalytic procedures were optimized for the parameters involved, such as the solvent and oxidant. The results showed that 25 mg of supported H₃[PMo₁₂O₄₀] catalyst in 1 ml C₂H₄Cl₂ with 0.5 mmol cyclooctene and 1 mmol tert‐butylhydroperoxide at reflux temperature gave 98% yield over 15 min. Recycling experiments revealed that these nanocatalysts could be repeatedly applied up to five times for a nearly complete epoxidation of cis‐cycloocten. The optimized experimental conditions were also used successfully for the epoxidation of some other alkenes, such as cyclohexene, styrene and α‐methyl styrene.     

Covalent supporting of novel dioxo‐molybdenum tetradentate pyrrole‐imine complex on Fe3O4 as high‐efficiency nanocatalyst for selective epoxidation of olefins

A novel Mo(VI) tetradentate Schiff base complex based on two pyrrole‐imine donors was anchored covalently on Fe₃O₄ nanoparticles and characterized using physicochemical techniques. The catalytic epoxidation process was optimized in terms of the effects of solvent, reaction temperature, kind of oxidant and amount of oxidant and catalyst. Then the novel heterogeneous nanocatalyst was used for the efficient and selective catalytic epoxidation of internal alkenes (cyclohexene, cyclooctene, α‐pinene, indene and trans ‐1,2‐diphenylethene) and terminal alkenes (n ‐heptene, n ‐octene, n ‐dodecene and styrene) using tert ‐butyl hydroperoxide (70% in water) as oxidant in 1,2‐dichloroethane as solvent. The prepared nanocatalyst is very effective for the selective epoxidation of cis ‐cyclooctene with 100% conversion, 100% selectivity and turnover frequency of 1098 h⁻¹ in just 30 min. The magnetic nanocatalyst was easily recovered using an external magnetic field and was used subsequently at least six times without significant decrease in conversion.     

A green epoxidation system with poly(4‐vinylpyridine) microsphere‐supported molybdenum catalyst

The immobilization of molybdenum (Mo) compounds on poly(4‐vinylpyridine) (P4VP) microspheres for catalytic epoxidation was reported. P4VP‐supported Mo compounds were highly efficient and selective for the epoxidation of cis‐cyclooctene using hydrogen peroxide (H₂O₂) as oxygen source. When ethanol was used as solvents, outstanding catalytic activity and selectivity were observed for Mo‐containing catalysts in the epoxidation of cis‐cyclooctene. A completely green epoxidation system based on H₂O₂ and cleaner solvent has been achieved, and the heterogenized Mo catalyst can be recovered for five times without loss of its activity. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 558–562, 2010     

Synthesis,characterization and catalytic application of a new organometallic oligomer based on polyhedral oligomeric silsesquioxane

Although homogeneous catalysts provide high performance and selectivity, the difficulty of separation and recycling of these catalysts has bothered the scientific community worldwide. Therefore, the demand for heterogeneous catalysts that possess the advantages of homogeneous ones, with ease of separation and recyclability remains a topic of major impact. The oligomeric catalyst synthesized in this work was characterized using elemental analysis, Fourier transform infrared, ¹³C NMR, ²⁹Si NMR and energy‐dispersive X‐ray spectroscopies, X‐ray diffraction, thermogravimetric analysis, scanning electron microscopy and Brunauer–Emmett–Teller analysis and compared to its homogeneous counterpart [W(CO)₃Br₂(ATC)] in the epoxidation of 1‐octene, cyclooctene, (S )‐limonene, cis ‐3‐hexen‐1‐ol, trans ‐3‐hexen‐1‐ol and styrene. The results showed that the percentage conversion for the homogeneous species [W(CO)₃Br₂(ATC)] was slightly higher than for the oligomeric catalyst (POSS‐ATC‐[W(CO)₃Br₂]). Furthermore, the selectivity for epoxide of the oligomeric catalyst was greater than that of the homogeneous catalyst by about 25% when (S )‐limonene was used. Great conversions (yields) of products were obtained with a wide range of substrates and the catalyst was recycled many times without any substantial loss of its catalytic activity.     

Oxovanadium(IV) and dioxomolybdenum(VI) salen complexes tethered onto amino-functionalized SBA-15 for the epoxidation of cyclooctene

Oxovanadium(IV) and dioxomolybdenum(VI) salen complexes were firstly tethered onto amino-functionalized mesoporous SBA-15 materials by a stepwise procedure and were screened as catalysts for the epoxidation of cyclooctene. The mesoporous structural integrity throughout the tethering procedure, the successful tethering of the organometallic complexes, the loadings of metal ions and organic ligands as well as the catalyst surface constitution and location of active organometallic species on the SBA-15 support were determined by comprehensive characterization techniques such as XRD, N₂ adsorption/desorption, FT-IR, UV–vis spectroscopy, ICP-AES, XPS and TG/DTA. Catalytic properties in the epoxidation of cyclooctene demonstrate that both tethered oxovanadium(IV) and dioxomolybdenum(VI) catalysts were more active than their respective homogeneous analogue, and the tethered oxovanadium(IV) complex showed the best activity (64.3%) with H₂O₂ as the oxidant and CH₃CN as the solvent.     

Polymer-supported diimine molybdenum carbonyl complexes as highly reusable and efficient pre-catalysts in epoxidation of alkenes

By reaction of aldehydic polystyrene and ethylene diamine, polystyrene–imine–amine reagent was produced. Reaction of this reagent with benzaldehyde and 4-nitrobenzaldehyde resulted in polystyrene-diimines (3a and 3b). These reagents were used for the immobilization of molybdenum hexacarbonyl. The functionalized polystyrene and supported-diimine molybdenum carbonyl catalysts were characterized by FT-IR spectrum and CHN analysis. The molybdenum content of catalysts was determined by neutron activation analysis. Supported-diimine molybdenum carbonyl pre-catalysts (3aM and 3bM) were used in epoxidation of cyclooctene, and the reaction parameters such as solvent and oxidant were optimized and the epoxidation of different alkenes was investigated in optimizing these conditions. The obtained results in the presence of polymer-supported diimine molybdenum carbonyl pre-catalysts (3aM and 3bM) showed that they were very active and selective in the epoxidation of a wide range of alkenes. The reusability of the supported pre-catalysts was also studied. The results showed that they were highly reusable in epoxidation of alkenes.     

Ni@Pd core–shell nanoparticles immobilized on yolk–shell Fe3O4@polyaniline composites as a highly efficient,magnetically separable and atom‐economical catalyst for reduction of nitrobenzenes

The preparation of Ni@Pd core–shell nanoparticles immobilized on yolk–shell Fe₃O₄@polyaniline composites is reported. Fe₃O₄ nanoclusters were first synthesized through the solvothermal method and then the SiO₂ shell was coated on the Fe₃O₄ surface via a sol–gel process. To prepare Fe₃O₄@SiO₂@polyaniline composites, polyvinylpyrrolidone was first grafted on to the surface of Fe₃O₄@SiO₂ composites and subsequently polymerization of aniline was carried out via an ultrasound‐assisted in situ surface polymerization method. Selective etching of the middle SiO₂ layer was then accomplished to obtain the yolk–shell Fe₃O₄@polyaniline composites. The approach uses polyaniline (PANI) conductive polymer as a template for the synthesis of Ni@Pd core–shell nanoparticles. The catalytic activity of the synthesized yolk–shell Fe₃O₄@PANI/Ni@Pd composite was investigated in the reduction of o‐nitroaniline to benzenediamine by NaBH₄, which exhibited conversion of 99% in 3 min with a very low content of the catalyst. Transmission electron microscopy, X‐ray photoelectron spectroscopy, TGA, X‐ray diffraction, UV–visible, scanning electron microscopy, X‐ray energy dispersion spectroscopy and FT‐IR were employed to characterize the synthesized nanocatalyst. Copyright © 2014 John Wiley & Sons, Ltd.     

Ultra‐deep desulfurization of a model fuel using novel VOHPO4 0.5H2O/boehmite catalysts

A high‐surface‐area boehmite was used as the support for a series of vanadium phosphate catalysts. The catalysts were prepared by heating of V₂O₅ in an isobutyl alcohol and benzyl alcohol mixture at 140°C for 5 h to reduce V⁵⁺ to more active V⁴⁺ in the presence of phosphoric acid. Then a series of catalysts with various VPO loadings on boehmite were synthesized. The catalysts were characterized using various techniques. The catalysts were utilized for extraction combined with catalytic oxidation of dibenzothiophene. The important factors influencing the desulfurization process, including reaction time, temperature, H₂O₂, catalyst loading, catalyst amount and solvents, were systematically investigated. Under the optimized reaction conditions, i.e. 30 mg of catalyst loading at 50°C and in 60 min, sulfur removal reached 94%. The catalyst was recycled and reused five times.     

Six‐coordinated vanadium(IV) complexes with tridentate task‐specific ionic liquid Schiff base ligands: Synthesis,characterization and effect of ionic nature on catalytic activity

By reaction of 5‐(chloromethyl)salicylaldehyde with triphenylphosphine and N‐methylimidazole in two separate reactions, salicylaldehydetriphenylphosphonium chloride (S²) and salicylaldehydemethylimidazolinium chloride (S³) were prepared. Reaction of 2‐(aminomethyl)pyridine with these aldehydes resulted in the task‐specific ionic liquid Schiff base ligands L¹ and L², respectively. Then six‐coordinated vanadium(IV) Schiff base complexes of VO(acac)L^1–4 were synthesized by reactions of these tridentate Schiff base ligands and VO(acac)₂ in 1:1 stoichiometry. The aldehydes, ligands and VO(acac)L^1–4 complexes were characterized using infrared, ¹H NMR, ¹³C NMR, ³¹P NMR, UV–visible and mass spectroscopies, as well as elemental analysis. Paramagnetic property of the complexes was also studied using magnetic susceptibility measurements. The complexes were used as catalysts in epoxidation of cyclooctene and oxidation of methylphenyl sulfide and the reaction parameters were optimized. The effect of the ionic nature of the complexes was investigated in these oxidation reactions. The catalytic activity of the complexes could be varied by changing the ionic (cationic or anionic) character of VO(acac)L^1–4 catalysts in which counter anion variation showed a greater effect than cationic moiety variation.     

Grafting of η-Cp(COOMe)MoCl(CO)3 on the surface of mesoporous MCM-41 and MCM-48 materials

η⁵-Cp(COOMe)MoCl(CO)₃ is grafted on the surface of mesoporous MCM-41 and MCM-48 materials through available silanol groups. The structural intactness of the supporting materials is confirmed by powder XRD and N₂ adsorption analysis. The presence of the Mo complex on the surface is confirmed by FT-IR and elemental analysis. The catalysts are successfully applied for cyclooctene epoxidation.     

Activation of Hydrogen Peroxide by Ionic Liquids: Mechanistic Studies and Application in the Epoxidation of Olefins

Imidazolium‐based ionic liquids that contain perrhenate anions are very efficient reaction media for the epoxidation of olefins with H₂O₂ as an oxidant, thus affording cyclooctene in almost quantitative yields. The mechanism of this reaction does not follow the usual pathway through peroxo complexes, as is the case with long‐known molecular transition‐metal catalysts. By using in situ Raman, FTIR, and NMR spectroscopy and DFT calculations, we have shown that the formation of hydrogen bonds between the oxidant and perrhenate activates the oxidant, thereby leading to the transfer of an oxygen atom onto the olefin demonstrating the special features of an ionic liquid as a reaction environment. The influence of the imidazolium cation and the oxidant (aqueous H₂O₂, urea hydrogen peroxide, and tert‐butyl hydrogen peroxide) on the efficiency of the epoxidation of cis‐cyclooctene were examined. Other olefinic substrates were also used in this study and they exhibited good yields of the corresponding epoxides. This report shows the potential of using simple complexes or salts for the activation of hydrogen peroxide, owing to the interactions between the solvent medium and the active complex.     

An efficient hybrid, nanostructured, epoxidation catalyst: titanium silsesquioxane-polystyrene copolymer supported on SBA-15

A novel interfacial hybrid epoxidation catalyst was designed with a new immobilization method for homogeneous catalysts by coating an inorganic support with an organic polymer film containing active sites. The titanium silsesquioxane (TiPOSS) complex, which contains a single-site titanium active center, was immobilized successfully by in-situ copolymerization on a mesoporous SBA-15-supported polystyrene polymer. The resulting hybrid materials exhibit attractive textural properties (highly ordered mesostructure, large specific surface area (>380 m2 g-1) and pore volume (>or==0.46 cm3 g-1)), and high activity in the epoxidation of alkenes. In the epoxidation of cyclooctene with tert-butyl hydrogen peroxide (TBHP), the hybrid catalysts have rate constants comparable with that of their homogeneous counterpart, and can be recycled at least seven times. They can also catalyze the epoxidation of cyclooctene with aqueous H2O2 as the oxidant. In two-phase reaction media, the catalysts show much higher activity than their homogeneous counterpart due to the hydrophobic environment around the active centers. They behave as interfacial catalysts due to their multifunctionality, that is, the hydrophobicity of polystyrene and the polyhedral oligomeric silsesquioxanes (POSS), and the hydrophilicity of the silica and the mesoporous structure. Combination of the immobilization of homogeneous catalysts on two conventional supports, inorganic solid and organic polymer, is demonstrated to achieve novel heterogeneous catalytic ensembles with the merits of attractive textural properties, tunable surface properties, and optimized environments around the active sites.     

Oxide‐Supported IrNiOx Core–Shell Particles as Efficient,Cost‐Effective,and Stable Catalysts for Electrochemical Water Splitting

Active and highly stable oxide‐supported IrNiO_x core–shell catalysts for electrochemical water splitting are presented. IrNi_x@IrO_x nanoparticles supported on high‐surface‐area mesoporous antimony‐doped tin oxide (IrNiO_x /Meso‐ATO) were synthesized from bimetallic IrNi_x precursor alloys (PA‐IrNi_x /Meso‐ATO) using electrochemical Ni leaching and concomitant Ir oxidation. Special emphasis was placed on Ni/NiO surface segregation under thermal treatment of the PA‐IrNi_x /Meso‐ATO as well as on the surface chemical state of the particle/oxide support interface. Combining a wide array of characterization methods, we uncovered the detrimental effect of segregated NiO phases on the water splitting activity of core–shell particles. The core–shell IrNiO_x /Meso‐ATO catalyst displayed high water‐splitting activity and unprecedented stability in acidic electrolyte providing substantial progress in the development of PEM electrolyzer anode catalysts with drastically reduced Ir loading and significantly enhanced durability.     

The effect of iron phosphate,alumina and silica coatings on the morphology of carbonyl iron particles

Carbonyl iron powders were coated with iron phosphate using phosphating method and boehmite (γ‐AlOOH) or silicon hydroxide (Si(OH)₄) nanoparticles derived from the hydrolysis of tri‐sec‐butoxide (Al(OC₄H₉)₃) or tetramethylsilane (Si(OCH₃)₄) using sol–gel method. The coated powders were dried and calcined at 400 °C for 3 h in air. Cross‐section morphology of coated carbonyl iron powders were investigated by scanning electron microscopy energy dispersive X‐ray analysis. Coated Fe micro‐particles were spherical in shape with ‘shell/core’ structures. The shells consisted of an amorphous layer with varying thickness (100–800 nm) and the core represented a carbonyl iron. Gelatinous morphology of dried FePO₄ coating composed from nanoparticles of iron oxyhydroxides and hydrated iron phosphate with a shell thickness of ～100 nm around iron particles was observed. In coatings based on alumina or silica xerogels with a thickness of ～100–150 nm or ～200–500 nm, the coatings were composed of iron oxyhydroxides and γ‐AlOOH or Si(OH)₄. The resulting XRD diffractograms revealed the hematite (α‐Fe₂O₃) and magnetite (Fe₃O₄) that were formed in phosphated and sol–gel coated iron powders. The X‐ray diffraction patterns did not verify the presence of phosphates, alumina or silica and indicate the amorphous or nanocrystalline structure of FePO₄, γ‐Al₂O₃ and SiO₂. Copyright © 2009 John Wiley & Sons, Ltd.     

Epoxidation of cyclohexene with H2O2 over efficient water‐tolerant heterogeneous catalysts composed of mono‐substituted phosphotungstic acid on co‐functionalized SBA‐15

A series of Keggin‐type heteropolyacid‐based heterogeneous catalysts (Co‐/Fe‐/Cu‐POM‐octyl‐NH₃‐SBA‐15) were synthesized via immobilized transition metal mono‐ substituted phosphotungstic acids (Co‐/Fe‐/Cu‐POM) on octyl‐amino‐co‐functionalized mesoporous silica SBA‐15 (octyl‐NH₂‐SBA‐15). Characterization results indicated that Co‐/Fe‐/Cu‐POM units were highly dispersed in mesochannels of SBA‐15, and both types of Brønsted and Lewis acid sites existed in Co‐/Fe‐/Cu‐POM‐octyl‐NH₃‐SBA‐15 catalysts. Co‐POM‐octyl‐NH₃‐SBA‐15 catalyst showed excellent catalytic performance in H₂O₂‐mediated cyclohexene epoxidation with 83.8% of cyclohexene conversion, 92.8% of cyclohexene oxide selectivity, and 98/2 of epoxidation/allylic oxidation selectivity. The order of catalytic activity was Co‐POM‐octyl‐NH₃‐SBA‐15 > Fe‐POM‐octyl‐NH₃‐SBA‐15 > Cu‐POM‐octyl‐NH₃‐SBA‐15. In order to obtain insights into the role of ‐octyl moieties during catalysis, an octyl‐free catalyst (Co‐POM‐NH₃‐SBA‐15) was also synthesized. In comparison with Co‐POM‐NH₃‐SBA‐15, Co‐POM‐octyl‐NH₃‐SBA‐15 showed enhanced catalytic properties (viz. activity and selectivity) in cyclohexene epoxidation. Strong chemical bonding between ‐NH₃⁺ anchored on the surface of SBA‐15 and heteropolyanions resulted in excellent stability of Co‐POM‐octyl‐NH₃‐SBA‐15 catalyst, and it could be reused six times without considerable loss of activity.     

Comparative Structural,Optical, and Photoluminescence Studies of YF3:Pr,YF3:Pr@LaF3, and YF3:Pr@LaF3@SiO2 Core–Shell Nanocrystals

Praseodymium (Pr³⁺)‐doped YF₃ (core) and LaF₃ ‐covered YF₃ :Pr (core–shell) nanocrystals (NCs ) were prepared successfully by an ecofriendly, polyol‐based, co‐precipitation process, which were then coated with a silica shell by using a sol–gel‐based Stober method. X‐ray diffraction (XRD), transmission electron microscopy (TEM ), thermal analysis, Fourier transform infrared (FTIR) , UV /vis, energy bandgap, and photoluminescence studies were used to analyze the crystal structure, morphology, and optical properties of the nanomaterial. XRD and TEM results show that the grain size increases after sequential growth of crystalline LaF₃ and the silica shell. The silica surface modification enhances the solubility and colloidal stability of the core–shell‐SiO₂ NCs . The results indicate that the surface coating affects the optical properties because of the alteration in crystalline size of the materials. The emission intensity of silica‐modified NCs was significantly enhanced compared to that of core and core–shell NCs . These results are attributed to the formation of chemical bonds between core–shell and noncrystalline SiO₂ shell via La–O–Si bridges, which activate the “dormant” Pr³⁺ ions on the surfaces of the nanoparticles. The luminescence efficiency of the as‐prepared core, core–shell, and core–shell‐SiO₂ NCs are comparatively analyzed, and the observed differences are justified on the basis of the surface modification surrounding the luminescent seed core NCs .     

Facile fabrication of magnetic MoO2–Salen‐modified graphene‐based catalyst for epoxidation of alkenes

A facile, green and efficient method for the immobilization of MoO₂–Salen onto graphene hybridized with glucose‐coated magnetic Fe₃O₄ nanoparticles is proposed to fabricate a magnetic organic–inorganic hybrid heterogeneous RGO/Fe₃O₄@C‐Salen‐MoO₂ catalyst for the epoxidation of cyclooctene and geraniol using tert ‐butyl hydroperoxide or H₂O₂ as oxidant. Carbon‐coated Fe₃O₄ can improve the stability and add functional ─OH groups on the surface of Fe₃O₄. The fabricated composite exhibited good performance due to good dispersion of MoO₂–Salen active sites. The catalyst can be easily separated from the reaction system using a permanent magnet and used three times without significantly losing its catalytic activity and selectivity.     

Enhanced epoxidation of soybean oil by novel Al2O3–ZrO2–TiO2 solid acid catalyst

This study aims to develop highly efficient, recyclable solid catalysts for the epoxidation of vegetable oils. An Al₂O₃–ZrO₂–TiO₂ solid acid catalyst was prepared by a co‐precipitation/impregnation method and characterised through scanning electron microscopy, energy‐dispersive spectroscopy, X‐ray diffraction, X‐ray photoelectron spectroscopy, Fourier‐transform infrared and nitrogen adsorption–desorption analyses. The solid acid catalyst with a high surface area and typical slit pore adsorption was successfully synthesised. Al₂O₃–ZrO₂–TiO₂ also exhibits high stability and improved catalytic efficiency in the epoxidation of soybean oil. An oil conversion rate of 86.6%, which is higher than that of conventional catalysts, was obtained with a catalyst loading of 0.8 wt% and was maintained at 76.6% even after recycling the catalyst three times. The performance of the solid catalyst was slightly superior to that of H₂SO₄. Therefore, this novel catalyst may potentially be applicable in catalysing soybean oil epoxidation.