1-正丁基-3-甲基咪唑溴化物离子液体TGA-FTIR研究

利用TGA-FTIR技术,研究了空气及氮气气氛下1-正丁基-3-甲基咪唑溴化物的热性能.结果表明,在不同的气氛下,在离子液体的沸点附近,存在一定的蒸汽压,随着温度的升高,1-正丁基-3-甲基咪唑溴化物主要以蒸气的形式汽化.在离子液体汽化过程中,未观察到离子液体发生明显的分解现象.在受热过程中,离子液体可能发生碳化作用,在空气气氛中,离子液体可能发生氧化作用,并且,离子液体的碳化速率与氧化速率基本接近.随着温度的升高,离子液体的氧化及碳化产物被进一步深度氧化.     

[bmim]Cl/FeCl3离子液体催化苯与乙烯烷基化的反应机理

 利用FT-IR和1H NMR对KOH无水乙醇溶液滴定前后的氯化1-正丁基-3-甲基咪唑(［bmim］Cl)无水乙醇溶液进行分析发现,［bmim］Cl咪唑环上的2-H具有显著的质子酸性,滴定后的NMR谱中化学位移为9.5处的2-H信号完全消失,且在滴定过程中有KCl生成. 通过［bmim］Cl/FeCl3离子液体的1H NMR分析发现,咪唑环上的氢质子尤其是2-H的化学位移与FeCl3含量密切相关,随着FeCl3与［bmim］Cl摩尔比的增大, 2-H的化学位移向低场移动,说明其去屏蔽作用增强, 2-H更容易脱离. 将合成的［bmim］Cl/FeCl3离子液体脱水,并采用同位素置换的方法研究了离子液体催化全氘代苯与乙烯的烷基化反应机理. 结果表明,脱水后的离子液体仍然可以催化烷基化反应. 通过对反应后液体产物的GC-MS分析,提出了离子液体催化的苯与乙烯烷基化反应的正碳离子机理. 反应前后离子液体的1H NMR分析表明,反应后离子液体中咪唑环上的2-H的信号强度较反应前降低了23%,说明引发反应所需要的H+一部分是由咪唑环上的2-H提供的.     

咪唑六氟磷酸盐聚离子液体凝胶电解质的辐射合成及性能研究

以1-乙烯基-3-烷基咪唑六氟磷酸盐C_nvimPF_6(n=6,12)为单体,(1,6-亚己基)-双(3-乙烯基咪唑)六氟磷酸盐为交联剂,六氟磷酸锂为添加剂,混合碳酸酯为溶剂,采用辐射引发聚合、交联合成了新型的聚离子液体凝胶电解质(简称PC_nvimPF_6-Li GPE),并研究了离子液体单体侧链长度、单体浓度、交联剂含量对PC_nvimPF_6-Li GPE性能的影响.结果表明所合成的PC_nvimPF_6-Li GPE具有良好的力学性能和高离子电导率,最大离子电导率可达7.18 mS/cm.     

新型1-烷基-2,3-二甲基咪唑六氟磷酸盐离子液体/过氧化氢酶电极电化学性能研究与应用

合成了5种新型1-烷基-2,3-二甲基咪唑六氟磷酸盐类离子液体,并以离子液体为介质制备空白电极及过氧化氢酶电极.采用循环伏安法研究电极电化学行为,结果表明离子液体有优良的电化学性质.离子液体空白电极的基体峰电流都在数nA范围内,电化学窗口大于4 V;不同离子液体酶电极的电化学行为存在明显差异.在5种离子液体中,仅有1-戊基-2,3-二甲基咪唑六氟磷酸盐能很好地保持酶活,呈现灵敏的电化学响应.此外,该酶电极还具有良好的稳定性,4 ℃保存30 天后,电化学性质没有明显变化.在0.1 mol/L的H3PO4缓冲溶液(pH 7.0)中,该酶电极还原峰电流随溶液中H2O2浓度的增加而增大.当H2O2浓度在3.17×10-6～12.4×10-6 mol/L之间,酶电极的还原峰电流符合线性关系,其检出限为1.1×10-6 mol/L.方法已用于环境水中痕量H2O2的测定.     

碱性离子液体催化甘油合成1,2-甘油碳酸酯(英)

以离子液体为催化剂,在无溶剂体系中,考察了生物质平台化合物甘油转化1,2-甘油碳酸酯的反应.与酸性离子液体和常用无机碱性催化剂相比,碱性离子液体咪唑基1-丁基-3-甲基咪唑([Bmim]Im)、氢氧化1-丁基-3-甲基咪唑([Bmim]OH)、咪唑基1-烯丙基-3-甲基咪唑([Amim]Im)、氢氧化1-烯丙基-3-甲基咪唑([Amim]OH)在甘油与碳酸二甲酯的酯交换反应中表现出优异的活性.其中,以[Bmim]Im离子液体为催化剂时甘油转化率为98.4%和甘油碳酸酯选择性接近100%.另外,该离子液体可以回收重复利用3次后甘油转化率仍可达92%,甘油碳酸酯选择性可近100%.此碱性离子液体催化方法具有反应结果较好、产物分离简单、条件温和以及环境友好等特点.     

手性胍盐离子液体的合成

以1,3-二甲基-2-咪唑啉酮, α-甲基苄胺为原料, 三步合成了手性胍的氯盐, 再经复分解反应, 共合成了14种手性胍离子液体并对其结构性质进行了表征. 该类离子液体有望用于催化不对称Henry 反应、Michael加成反应等.     

离子液体[2-aemim]im催化Knoevenagel反应和异噁唑酮合成

以碱性离子液体1-(2-氨基乙基)-3-甲基咪唑咪唑盐([2-aemim]im)作为催化剂,催化Knoevenagel反应和4-芳亚甲基异噁唑-5(4H)-酮衍生物的合成。实验结果表明:在无溶剂条件下,该离子液体对Knoevenagel反应具有很高的催化活性,一系列芳香醛和活泼亚甲基化合物的反应在室温条件下2 min内顺利完成,均以90%以上的高产率生成取代烯烃产物.将该碱性离子液体用于催化乙酰乙酸乙酯或苯甲酰乙酸乙酯、盐酸羟胺和芳香醛三组分一锅法缩合制备4-芳亚甲基异噁唑-5(4H)-酮衍生物,具有反应时间较短、产率较高和后处理简单的特点。离子液体经简单处理后能多次循环使用。     

离子液体/水混合溶剂促进芳醛与罗丹宁的缩合反应

在室温条件下, 离子液体1-正丁基-3-甲基咪唑四氟硼酸盐([bmim]BF₄)与水组成的混合溶剂能有效催化一系列芳醛与罗丹宁反应, 以80%～93%的产率生成相应的5-芳亚甲基-2,4-噻唑二酮. 离子液体[bmim]BF₄催化活性高, 反应在10～120 min内完成. 实验结果表明该法反应条件温和、产率高、反应时间短、后处理简单、离子液体可重复使用.     

咪唑基离子液体固定分离CO2的研究进展

以咪唑基离子液体为代表,综述了近期普通咪唑基离子液体、功能咪唑基离子液体、支撑咪唑基离子液体和聚合咪唑基离子液体在分离固定CO2方面的研究进展,说明了各类咪唑基离子液体分离固定CO2的可行性及优缺点,并总结了离子液体固定CO2的影响因素和分离机制.     

含离子液体［bmim］Cl的反应介质中马肝醇脱氢酶的催化特性

 研究了马肝醇脱氢酶(HLADH)在含离子液体1-丁基-3-甲基咪唑氯酸盐(［bmim］Cl)的反应介质中的催化特性. 以乙醇为底物时,该酶在［bmim］Cl含量≤0.15 g/ml的体系中的活力高于在不含离子液体的体系中的活力; 离子液体浓度过高(＞0.15 g/ml)对酶活性有明显的抑制作用. 反应温度和pH对含离子液体的反应介质中酶活力的影响规律与不含离子液体时的规律相似. 与不含离子液体的反应介质相比, HLADH在含0.05 g/ml ［bmim］Cl的体系中催化乙醇氧化的活化能下降,酶反应的Vmax和Km均升高. 反应体系中低浓度(≤0.1 g/ml)的离子液体能提高酶的热稳定性,但高浓度(＞0.1 g/ml)的离子液体可降低酶的热稳定性. 紫外二阶导数光谱显示,在含不同浓度离子液体的反应介质中酶分子构象的变化有较大的差异.     

Synthesis and characterization of novel chiral imidazolium and pyridinium ionic liquids derived from tartaric acid and 2-oxazolidinone

Abstract

Novel chiral imidazolium and pyridinium ionic liquids based on tartaric acid and 2-oxazolidinone were designed. Symmetrical dicationic ionic liquids based on tartaric acid have been synthesized and characterized. These chiral ionic liquids were designed by employing very short and simple methods. Incorporation of alkyl halide over tartaric acid and 2-oxazolidinone is an important step. N-methyl imidazole and pyridine were used for preparation of quaternary salts. These ionic liquids have been evaluated for the asymmetric sulfide oxidation. Chiral ionic liquids based on tartaric acid showed superior chiral inducing property as compare to 2-oxazolidinone based chiral ionic liquids.     

Synthesis of Multiester-appended and Multicarboxylic-appended Imidazolium Ionic Liquids

Currently ionic liquids (ILs) are attracting considerable interest as eco-friendly solventsfor the replacement of volatile organic solvents in organic synthesis and catalysis1.Low-melting ILs based on imidazolium cations have dominated this area over the …     

Mitsunobu alkylation of imidazole: a convenient route to chiral ionic liquids

The Mitsunobu protocol offers a convenient route from imidazole to N-alkyl-substituted imidazoles, precursors to imidazolium-based ionic liquids, and is particularly useful for preparing chiral ionic liquids.     

Thermochemical study on the dissolution and regeneration of fibroin from solutions in imidazole-based ionic liquids

The enthalpies of dissolution of fibroin in imidazole-based ionic liquids were determined, and the contribution of polymer crystal structure decomposition to the enthalpy of dissolution was estimated. The heat of mixing of imidazole ionic liquid with water was described.     

Solvent-free aza-Markovnikov and aza-Michael additions promoted by a catalytic amount of imidazolide basic ionic liquids

A family of imidazolide ionic liquids were synthesized and characterized. These ionic liquids combined the virtues of strong basicity and relatively good thermal stability. Catalytic properties of these imidazolide ionic liquids were investigated and satisfactory yield was achieved when 2.0 mol % of [Bmim]Im was used as catalyst for aza-Markovnikov addition under solvent-free condition at room temperature in one hour. Experimental results show that a hydrogen bond is not formed between [Bmim]Im/imidazole and vinyl ester, and its existence is not necessary for the [Bmim]Im catalyzed aza-Markovnikov addition either. A possible mechanism for [Bmim]Im-catalyzed aza-Markovnikov addition was proposed. The use of imidazolide ionic liquids in aza-Michael addition was investigated as well.     

Magnetic graphene oxide modified by imidazole‐based ionic liquids for the magnetic‐based solid‐phase extraction of polysaccharides from brown alga

Magnetic graphene oxide was modified by four imidazole‐based ionic liquids to synthesize materials for the extraction of polysaccharides by magnetic solid‐phase extraction. Fucoidan and laminarin were chosen as the representative polysaccharides owing to their excellent pharmaceutical value and availability. Fourier transform infrared spectroscopy, field‐emission scanning electron microscopy, and thermogravimetric analysis were applied to characterize the synthesized materials. Single‐factor experiments showed that the extraction efficiency of polysaccharides was affected by the amount of ionic liquids for modification, solid–liquid ratio of brown alga and ethanol, the stirring time of brown alga and ionic liquid‐modified magnetic graphene oxide materials, and amount of 1‐(3‐aminopropyl)imidazole chloride modified magnetic graphene oxide materials added to the brown alga sample solution. The results indicated that 1‐(3‐aminopropyl)imidazole chloride modified magnetic graphene oxide possessed better extraction ability than graphene oxide, magnetic graphene oxide, and other three ionic‐liquid‐modified magnetic graphene oxide materials. The highest extraction recoveries of fucoidan and laminarin extracted by 1‐(3‐aminopropyl)imidazole chloride modified magnetic graphene oxide were 93.3 and 87.2%, respectively. In addition, solid materials could be separated and reused easily owing to their magnetic properties.     

胍盐离子液体对Si3N4/钢摩擦副的摩擦性能

两种具有较高热稳定性的胍盐离子液体用于Si₃N₄/钢摩擦副摩擦学性能的研究,在扫描电子显微镜下观察了磨斑表面形貌,并与烷基咪唑离子液体进行对比。 用X射线光电子能谱仪(XPS)分析了润滑机理。 结果表明,胍盐离子液体对Si₃N₄/钢摩擦副具有非常好的润滑作用,其承载能力强,摩擦系数小,磨痕浅。 摩擦过程中,Si₃N₄/钢摩擦副界面发生了复杂的摩擦化学反应并形成了边界润滑膜,起到减摩抗磨的作用。     

First Binary Mixture Ionic Liquids Containing EMIMBr and IM

A new series of binary mixture ionic liquids comprising 1-ethyl-3-methylimidozalium bromide(EMIMBr) and imidazole(IM) have been synthesized.The melting prints of the ionic liquids vary with te different content of IM while they still keey satisfactory conductivity and viscosity.According to the analysis of its phase diagram,the cutectic point is about 16.5℃ with the mass percentage of IM 29%.     

Improving Mass Transfer in Gas-Liquid by Ionic Liquids Dispersion

This study investigates effects of dispersed ionic liquids on chemical absorption of CO₂ in alkanolamine aqueous solution. Oil-in-water emulsion has been prepared, whose continuous phase is trethanol amine aqueous solution, and dispersed phase is an ionic liquid, 1-octyl-3methyl imidazole six phosphate fluoride. The morphololgy of dispersion has been observed by visual method. Absorption rates are linearly fitted based on experimental data. Results show that a mass transfer enhancement has been realized by ionic liquids dispersion. The collaborative action of hydrodynamic effect and shuttle effect is proved to be the main mechanism that ionic liquids dispersion enhances gas absorption. The research indicates that dispersed ionic liquids can bring some advantages, higher absorption rate, lower corrosion for equipment, and higher regeneration efficiencies.     

离子液体在多水相液液平衡体系中的作用

通过用短链离子液体(1-乙基-3-甲基咪唑溴盐[C2mim]Br、1-丁基-3-甲基咪唑溴盐[C4mim]Br)部分或全部取代SDS/DTAB/PEG/NaBr/H2O多水相体系中的无机盐NaBr,用长链离子液体十二烷基-3-甲基咪唑溴盐[C12mim]Br部分取代体系中阳离子表面活性剂DTAB,系统研究了离子液体在分相体系中的作用及其对分相体系性质的影响.研究表明,SDS/DTAB/PEG/NaBr/H2O混合体系形成的四水相体系可以看作"聚合物双水相"与"表面活性剂双水相"共存的结果.短链离子液体([C2mim]Br、[C4mim]Br)较强的亲水性能赋予其较强的盐析能力,在混合体系中表现出明显的盐效应,保证了四水相体系中"聚合物双水相"的存在.短链离子液体与聚合物之间的相互作用及其对表面活性剂之间相互作用的影响均不可忽略.对混合体系的相行为,共存多相的性质有重要的影响.而长链离子液体[C12mim]Br主要通过自身的疏水作用影响"表面活性剂双水相"的性质,充当表面活性剂的角色.然而,[C12mim]Br与DTAB分子结构上的差异,导致表面活性剂分子在"表面活性剂双水相"的两相重新分配,影响了对应两相的体积及萃取能力.可见,通过调节离子液体的烷基链长、混合体系中的含量等可获得具有特定性质的多水相体系.