Design of guanidinium ionic liquid based microwave‐assisted extraction for the efficient extraction of Praeruptorin A from Radix peucedani

A series of novel tetramethylguanidinium ionic liquids and hexaalkylguanidinium ionic liquids have been synthesized based on 1,1,3,3‐tetramethylguanidine. The structures of the ionic liquids were confirmed by ¹H NMR spectroscopy and mass spectrometry. A green guanidinium ionic liquid based microwave‐assisted extraction method has been developed with these guanidinium ionic liquids for the effective extraction of Praeruptorin A from Radix peucedani. After extraction, reversed‐phase high‐performance liquid chromatography with UV detection was employed for the analysis of Praeruptorin A. Several significant operating parameters were systematically optimized by single‐factor and L₉ (3⁴) orthogonal array experiments. The amount of Praeruptorin A extracted by [1,1,3,3‐tetramethylguanidine]CH₂CH(OH)COOH is the highest, reaching 11.05 ± 0.13 mg/g. Guanidinium ionic liquid based microwave‐assisted extraction presents unique advantages in Praeruptorin A extraction compared with guanidinium ionic liquid based maceration extraction, guanidinium ionic liquid based heat reflux extraction and guanidinium ionic liquid based ultrasound‐assisted extraction. The precision, stability, and repeatability of the process were investigated. The mechanisms of guanidinium ionic liquid based microwave‐assisted extraction were researched by scanning electron microscopy and IR spectroscopy. All the results show that guanidinium ionic liquid based microwave‐assisted extraction has a huge potential in the extraction of bioactive compounds from complex samples.     

Synthesis,Characterization, Thermal Analyses,and Spectroscopic Properties of Novel Naphthyl-Functionalized Imidazolium Ionic Liquids

A series of novel ionic liquids based on naphthyl-functionalized imidazolium cation have been prepared. Their structure was characterized by NMR. The thermal stabilities of the prepared liquids were studied by thermal gravimetric analysis. The new ionic liquids containing NTf^-₂ anion display significantly higher thermal stabilities (>400°C). Anion exchange to PF^-₆, BF^-₄, and Br^– decreases the thermal stabilities of such ionic liquids. Fluorescence and UV–Vis absorption spectroscopy were used to study the spectroscopic properties of the ionic liquids. Compared with common ionic liquids, the described ionic liquids provide robust fluorescence properties and remarkably increased UV–Vis absorption. This research may enrich the field of functionalized ionic liquids and provide a platform for extension of ionic liquid applications.     

Synthesis and characterization of novel chiral imidazolium and pyridinium ionic liquids derived from tartaric acid and 2-oxazolidinone

Abstract

Novel chiral imidazolium and pyridinium ionic liquids based on tartaric acid and 2-oxazolidinone were designed. Symmetrical dicationic ionic liquids based on tartaric acid have been synthesized and characterized. These chiral ionic liquids were designed by employing very short and simple methods. Incorporation of alkyl halide over tartaric acid and 2-oxazolidinone is an important step. N-methyl imidazole and pyridine were used for preparation of quaternary salts. These ionic liquids have been evaluated for the asymmetric sulfide oxidation. Chiral ionic liquids based on tartaric acid showed superior chiral inducing property as compare to 2-oxazolidinone based chiral ionic liquids.     

Synthesis and Characterization of Ammonium-, Pyridinium-, and Pyrrolidinium-Based Sulfonamido Functionalized Ionic Liquids

New homologous ammonium-, pyridinium-, and pyrrolidinium-based sulfonamido functionalized ionic liquids have been synthesized in two steps using monoethanolamine, methanesulfonyl chloride, and tosyl chloride as precursors with ethanol as solvent. Attempts to synthesize dual amino functionalized ionic liquid containing both a primary and a secondary amine group in the same ionic liquid are also reported. All functionalized ionic liquids were characterized by ¹H and ¹³C NMR. Melting point and thermal stability of the functionalized ionic liquids were measured by differential scanning calorimetry and thermogravimetric analysis.     

IR125和HDITCP在不同烷基链长阳离子离子液体中的光异构化动力学

利用稳态吸收和荧光光谱以及时间相关单光子计数实验,分别测得近红外花菁分子IR125和HDITCP在不同烷基链长阳离子离子液体中的荧光量子产率和荧光寿命,并通过计算获得了它们各自在相应离子液体中的光异构化速率.发现IR125和HDITCP在不同离子液体中的光异构化速率没有随着离子液体粘度的增大而产生明显变化.与IR125和HDITCP在与离子液体具有相同粘度的甘油水溶液中的光异构化速率对比,发现IR125和HDITCP在离子液体中的光异构化能垒比它们在甘油水溶液中的光异构化能垒增大约2 kJ?mol-1,这表明在高粘度的离子液体中IR125或HDITCP与离子液体之间特殊的相互作用会阻碍它们各自的光异构化过程.     

The Baeyer-Villiger oxidation of ketones with Oxone in the presence of ionic liquids as solvents

Cyclic and linear ketones were readily oxidised with Oxone^® at 40 °C in ionic liquids as solvents and short times (2.5-20 h), affording their corresponding lactones and esters in high yields (65-95%). Both, aprotic and protic ionic liquids were used. The best conversion of ketones and the highest yields of products were obtained with 1-buty-3-methylimidazolium tetrafluoroborate and 1-methylimidazolium acetate as solvents. These ionic liquids were also efficiently recycled in the Baeyer-Villiger reaction without significant loss of activity. Several factors, such as the partial solubility of KHSO₅ in the ionic liquid, its viscosity and the presence of a proton in protic ionic liquids, have an influence on the course of the reaction.     

High ionic conductivity of all-solid polymer electrolytes based on polyorganophosphazenes

A series of all-solid polymer electrolytes were prepared by cross-linking new designed poly(organophosphazene) macromonomers. The ionic conductivities of these all-solid, dimensional steady polymer electrolytes were reported. The temperature dependence of ionic conductivity of the all-solid polymer electrolytes suggested that the ionic transport is correlated with the segmental motion of the polymer. The relationship between lithium salts content and ionic conductivity was discussed and investigated by Infrared spectrum. Furthermore, the polarity of the host materials was thought to be a key to the ionic conductivity of polymer electrolyte. The all-solid polymer electrolytes based on these poly(organophosphazenes) showed ionic conductivity of 10⁻⁴ S cm⁻¹ at room temperature.     

Spectroscopic evaluation of chiral and achiral fluorescent ionic liquids

In this study, spectroscopic investigation of chiral and achiral room temperature ionic liquids is achieved. New ionic liquids were prepared via metathesis, accomplished by the reaction of either L-phenylalanine ethyl ester hydrochloride, chlorpromazine hydrochloride or 1,10-Phenanthroline monohydrate hydrochloride with lithium bis(trifluoromethane) sulfonamide in water. The resulting ionic liquids were produced in high yield and purity. The results obtained by use of ¹H NMR and IR experiments were in very good agreement with the chemical structures of the synthesized ionic liquids. In addition, the results of thermal gravimetric analysis suggested that these ionic liquids have good thermal stability. UV-Vis and fluorescence spectroscopy measurements indicated that these ionic liquids are strongly optically absorbent and fluorescent. Lastly, time-based fluorescence steady-state measurements demonstrated the high photostability of these ionic liquids.      

Rapid Determination of DDT and Its Metabolites in Environmental Water Samples with Mixed Ionic Liquids Dispersive Liquid–Liquid Microextraction Prior to HPLC-UV

In this paper, a novel mixed ionic liquids-dispersive liquid–liquid microextraction method was developed for rapid enrichment and determination of environmental pollutants in water samples. In this method, two kinds of ionic liquids, hydrophobic ionic liquid and hydrophilic ionic liquid, were used as extraction solvent and disperser solvent, respectively. DDT and its metabolites were used as model analytes and high-performance liquid chromatography with ultraviolet detector for the analysis. Factors that may affect the extraction recoveries, such as type and volume of extraction solvent (hydrophobic ionic liquid) and disperser solvent (hydrophilic ionic liquid), extraction time, sample pH and ionic strength, were investigated and optimized. Under the optimum conditions, the linear range was 1–100 μg L⁻¹, limits of detection could reach 0.21–0.49 μg L⁻¹, and relative standard deviation was 6.01–8.48 % (n = 7) for the analytes. Satisfactory results were achieved when the method was applied to analyze the target pollutants in environmental water samples with spiked recoveries over the range of 85.7–106.8 %.

     

Partition coefficients of organic compounds in new imidazolium based ionic liquids using inverse gas chromatography

Partition coefficients of organic compounds in four ionic liquids: 1-ethanol-3-methylimidazolium tetrafluoroborate, 1-ethanol-3-methylimidazolium hexafluorophosphate, 1,3-dimethylimidazolium dimethylphosphate and 1-ethyl-3-methylimidazolium diethylphosphate were measured using inverse gas chromatography from 303.3 to 332.55 K. The influence of gas–liquid and gas–solid interfacial adsorption of different solutes on ionic liquids was also studied. Most of the polar solutes were retained largely by partition while light hydrocarbons were retained predominantly by interfacial adsorption on the ionic liquids studied in this work. The solvation characteristics of the ionic liquids were evaluated using the Abraham solvation parameter model.     

Comparative Investigation of the Ionicity of Aprotic and Protic Ionic Liquids in Molecular Solvents by using Conductometry and NMR Spectroscopy

Electrical conductivity (σ), viscosity (η), and self‐diffusion coefficient (D) measurements of binary mixtures of aprotic and protic imidazolium‐based ionic liquids with water, dimethyl sulfoxide, and ethylene glycol were measured from 293.15 to 323.15 K. The temperature dependence study reveals typical Arrhenius behavior. The ionicities of aprotic ionic liquids were observed to be higher than those of protic ionic liquids in these solvents. The aprotic ionic liquid, 1‐butyl‐3‐methylimidazolium tetrafluoroborate, [bmIm][BF₄], displays 100 % ionicity in both water and ethylene glycol. The protic ionic liquids in both water and ethylene glycol are classed as good ionic candidates, whereas in DMSO they are classed as having a poor ionic nature. The solvation dynamics of the ionic species of the ionic liquids are illustrated on the basis of the ¹H NMR chemical shifts of the ionic liquids. The self‐diffusion coefficients D of the cation and anion of [HmIm][CH₃COO] in D₂O and in [D₆]DMSO are determined by using ¹H nuclei with pulsed field gradient spin‐echo NMR spectroscopy.     

Brønsted酸性离子液体中的二甘醇脱水环化反应

首次报道了Brønsted酸性离子液体介质中的二甘醇的脱水环化反应,考察了不同的离子液体、离子液体/二甘醇摩尔比、反应温度和时间对反应的影响。结果表明,Brønsted酸性离子液体作为反应介质能够促进脱水环化反应的有效进行,且在离子液体1-(3-磺酸根丙基)-3-甲基咪唑硫酸氢盐([SPmim]HSO4)中,二甘醇的转化率和1,4-二氧六环的选择性更高。采用Hammett指示剂法测定了离子液体的酸度函数H0,其酸性强弱顺序为[SPmim]HSO4 > [Bmim]HSO4 > [Amim]HSO4 > [Hmim]BF4> [Bmim]H2PO4 >[Amim]H2PO4 > [Hmim]Tsa,这与离子液体在脱水环化反应中的催化效果一致。当温度为170 ˚C,离子液体/二甘醇摩尔比为1:1时,二甘醇在[SPmim]HSO4中反应2 h,转化率可达到97.0%,1,4-二氧六环的选择性为89.3%。     

Superbase-derived protic ionic liquids with chelating fluorinated anions

Eighteen new protic ionic liquids were synthesized in one step from five organic superbases and five commercially available fluorinated β-diketones. Physical properties of the ionic liquids, including thermal decomposition temperature were determined. Nine of the ionic liquids were examined as extraction media for La³⁺, with some very large distribution coefficients obtained.     

Temperature dependence of viscosity and relation with the surface tension of ionic liquids

Viscosities of ionic liquids were correlated with two linear relations. The first one presents the temperature dependence of imidazolium-, pyridinium-, pyrrolidinium-, quaternary ammonium-, and nicotinium-based ionic liquids with high accuracy. The second one is a linear relation between logarithm of surface tension and fluidity involving the characteristic exponent ?, and fits the ionic liquids uniquely with ? = 0.30. Our previously measured surface tension data of ionic liquids and literature's were used in this study. The dependence of surface tension–fluidity relation of the imidazolium-based ionic liquids on the anion type is likely disappeared as alkyl chain length increases.     

Aerobic oxidation with N-hydroxyphthalimide catalysts in ionic liquid

N-Hydroxyphthalimide (NHPI)-catalyzed aerobic oxidations in the ionic liquids were examined for the first time. Both NHPI and its ionic derivative, 3-pyridinylmethyl-N-hydroxyphthalimide (Py-NHPI), were found to have better performance in the ionic liquid than in the conventional organic solvents for the aerobic oxidation of N-alkylamides to imides. On the other hand, Py-NHPI was found to be a much better catalyst than NHPI for the aerobic oxidation of benzylic compounds in the ionic liquid.     

Ionic Liquid Crystalline Calixarene with Photo-Switchable Proton Conduction

We have developed a new strategy for the preparation of a light-responsive ionic liquid crystal (LC) that shows photo-switchable proton conduction. The ionic LC consists of a bowl-shaped calix[4]arene core ionically functionalized with azobenzene moieties. The non-covalent architectures were obtained by the formation of ionic salts between the carboxylic acid group of an azo-derivative and the terminal amine groups of a calixarene core. The presence of ionic salts results in a hierarchical self-assembly process that extends to the formation of a nanostructured lamellar LC arrangement (smectic A phase). In this LC phase, the ionic LC calixarene is able to display proton conductive properties, since the ionic nanosegregated areas (formed by the ionic pairs) generate the continuous channels that favor proton transport. The optical and photo-responsive properties were studied by UV-Vis spectroscopy, demonstrating that the azobenzene moieties of the ionic LC undergo reversible (E)-to-(Z) isomerization by irradiation with UV light. Interestingly, this (E)-to-(Z) photoisomerization results in a decrease of the proton conductivity values since the bent-shaped (Z)-isomer disrupts the lamellar LC phase. This isomerization process is totally reversible and leads to an ionic LC material with unique photo-switchable proton conductive properties.     

A group contribution method to estimate the densities of ionic liquids

Densities of ionic liquids at different temperature and pressure were collected from 84 references. The collection contains 7381 data points derived from 123 pure ionic liquids and 13 kinds of binary ionic liquids mixtures. In terms of the collected database, a group contribution method based on 51 groups was used to predict the densities of ionic liquids. In group partition, the effect of interaction among several substitutes on the same center was considered. The same structure in different substitutes may have different group values. According to the estimation of pure ionic liquids’ densities, the results show that the average relative error is 0.88% and the standard deviation (S) is 0.0181. Using the set of group values three pure ionic liquids densities were predicted, the average relative error is 0.27% and the S is 0.0048. For ionic liquid mixtures, they are thought considered as idea mixtures, so the group contribution method was used to estimate their densities and the average relative error is 1.22% with S is 0.0607. And the method can also be used to estimate the densities of MCl_x type ionic liquids which are produced by mixing an ionic liquid with a Cl^? anion and a kind of metal chloride.     

Efficient cyclodehydration of diethylene glycol in Brønsted acidic ionic liquids

Cyclodehydration of diethylene glycol using various Brønsted acidic ionic liquids as dual solvent-catalysts has been studied for the first time. Better results were obtained in the presence of 1-butyl-3-methylimidazolium hydrogen sulfate ([PSmim]HSO₄) compared with other Brønsted acidic ionic liquids. Effects of the reaction conditions such as reaction temperature, reaction time and molar ratio of ionic liquid to diethylene glycol have been investigated. High diethylene glycol conversion, 97.0 %, and high 1,4-dioxane selectivity, 89.3 %, were obtained in [PSmim]HSO₄ under optimum conditions. Hammett method was used to determine the acidity order of these ionic liquids and the results were consistent with the catalytic activities observed in the cyclodehydration reaction. Utilization of Brønsted acidic ionic liquids as dual solvent-catalysts has some advantages, e.g. high conversion of DEG, easy preparation and reuse of ionic liquids, avoiding toxic catalysts and solvents.     

Studies on the properties of ionic liquid BMIInCl4

An ionic liquid (IL) was prepared by directly mixing InCl₃ and 1-methyl-3-butylimidazolium chloride(BMIC) with molar ratio 1:1 under dry argon atmosphere. The densities, and surface tension of pure IL were determined at temperature range of (278.15 to 343.15±0.1K). The properties for ionic liquid based on group III were discussed using Glasser’s theory. The standard entropy, the surface energy and the crystal energy of ionic liquid were calculated, respectively. The crystal energy of ionic liquid is much lower than ionic solid and this is the underlying reason for forming ionic liquid at room temperature. In addition, a new theoretical model of IL, that is interstice model, was applied to calculate the thermal expansion coefficient of BMIInCl₄. The order of magnitude for the thermal expansion coefficient, a, calculated by the theoretical model is in good agreement with experimental value. The result shows that there is much reasonableness for the interstice model of ionic liquid. __________ Translated from Chemical Journal of Chinese University, 2005, 26(10)(in Chinese)     

POE incorporation into ionic clusters of ionomer and ion-conduction behaviors

Poly(oxyethylene) (POE) was incorporated into the ionic clusters of ionomers, ethylene and methacrylic acid (7.2% neutralized with KOH) copolymer membrane. The changes of properties were studied from SAXS, DSC, IR and ionic conductivity. The IR study suggested that the coordinated structures in ionic clusters of the membrane were destroyed by POE incorporation, and also SAXS suggested that ionic clusters were swollen by POE incorporation. The ionic conductivity, a carrier being K⁺ in this system, increases from 10^?16 S/cm to 10^?9 S/cm at 30°C by the incorporation of POE (20.5 wt%). On the other hand, a large amount of POE (63 wt%) could be incorporated into ionomer membrane by the esterification of methacrylic acid groups (93%) with POE. When LiClO₄ was added, ionic conduction occurred in the phase-separated POE domain, which had a low glass transition temperature (?55.2°C), showing an ionic conductivity 2.6 × 10^?6 S/cm at 25°C.