Supramolecular incorporation of fullerenes on gold surfaces: comparison of C60 incorporation by self-assembled monolayers of different calix[n]arene (n = 4, 6, 8) derivatives

[reaction: see text] Two new calix[6]arene derivatives 3 and 4 in a 1,4-anti conformation and one calix[8]arene derivative 5 were synthesized. SAMs of calix[n]arene (n = 4, 6, 8) derivatives 1-5 were formed on gold bead electrodes. Cyclic voltammetry with Ru(NH3)6(3+/2+) as a redox probe, together with impedance spectroscopy and reductive desorption, indicates that SAMs of 5 have a higher coverage than those of 3 and 4 due to the presence of hydrogen bonding and possibly its conformation. Noncovalent immobilization of C60 on gold surfaces was achieved with SAMs of calix[8]arene derivative 5 but not with those of 1-4.     

Inherently chiral biscalixarene cone–cone conformers consisting of calix[4]arene and calix[5]arene subunits

Inherently chiral biscalixarenes with hetero-cavities were synthesized by a covalent assembly of p-tert-butylcalix[5]arene with a 1,3-substituted calix[4]arene via 1,3-alkylation reaction and subsequent desymmetrization. The racemates were resolved by chiral HPLC method. ¹H NMR spectra, VT-NMR spectra, and theoretical calculations support that the calix[5]arene subunit of the inherently chiral calix[4][5]arene ester adopts a cone-in conformation, with the aromatic ring bearing the CH₂CO₂Et group tilting inward the calix[5]arene cavity. By contrast, such a cone-in structural feature of the calix[5]arene subunit disappears for the corresponding inherently chiral calix[4][5]arene carboxylic acid, due to the intramolecular hydrogen bonding between the carboxyl group and an ethereal oxygen of the glycolic chain.     

Binding Studies on the Control of the Conformation and Self-assembly of a Calix[4]arenedicarboxylic Acid through Hydrogen Bonding Interactions

A convenient method for measuring the dimerisation constant in solution of a calix[4]arenedicarboxylic acid is reported. This compound also co-crystallises with a bis(amidopyridyl)calix[4]arene as independent tubular calixarene stacks that are cross-linked via carboxyl–amidopyridyl hydrogen bonding and π-stacking of the amidopyridyl arms.     

含酰胺和硫脲单元的杯[4]芳烃衍生物的合成

杯[4]芳烃．1,3-二乙酸乙酯衍生物与水合肼反应生成杯[4]芳烃酰肼衍生物(2),2与异硫氰酸苯酯反应得到新型含酰胺和硫脲单元的杯[4]芳烃衍生物,总产率85％。     

Deprotonation of calixarenes in acetonitrile

[Structure: see text]. The pKa values for calixarenes in MeCN have been determined by selective titration with bases using a spectroscopic method. These values are as follows: calix[4]arene pKa(1) = 19.06 +/- 0.22, pKa(2) > 33; calix[6]arene pKa(1) = 15.59 +/- 0.06, pKa(2) = 23.85 +/- 0.35, pKa(3) > 33; calix[8]arene pKa(1) = 17.20 +/- 0.20, pKa(2) = 20.32 +/- 0.31, pKa(3) > 33. The trends in acidity are rationalized using structures generated by a DFT model. For mono-deprotonation, the degree and nature of hydrogen bonding in the anion is the dominant factor; for di-deprotonation, spatial separation of the anionic charges becomes important.     

Ab initio and density functional studies of cooperative hydrogen bonding in calix[4]-and calix[6]arenes

The cone conformation of C ₄ symmetry is shown by the Hartree-Fock method (3-21G basis) to be the predominant conformer of calix[4]arene; the compressed cone of C ₂ symmetry is the major conformer of calix[6]arene. Using quantum chemical methods we calculated hydrogen bond cleavage energies for calix[4]-(ab initio and density functional methods) and calix[6]arene (ab initio), and also for the complex of calix[4]arene with carbon disulfide. These energies along with structural data point to the cooperative effect of hydrogen bonds. The results of these studies provided an explanation to the greater conformational lability of calix[6]arene compared with calix[4]arene molecules. It is also predicted that the nucleophilic substitution reaction involving calix[6]arene in the presence of weak bases and in aprotic solvents, as well as in the gas phase, will occur via diastereomeric transition states.     

Evidence of Hydrogen Bonding in Stabilizing the Cone Conformation of a Monoalkylated Calix[4]arene. X-ray Structure of 25-[2-(ethoxy-1-p-toluene-sulfonate)phenyl]-26,27,28-trihydroxy calix[4]arene

The synthesis of25-[2-(ethoxy-1-p-toluene-sulfonate)phenyl]-26,27,28-trihydroxy calix[4]arene3 as a byproduct of the preparation of 1,3-dialkylated25,27-di-[2-(ethoxy-1p-toluene-sulfonate)phenyl]-26,28-dihydroxy calix[4]arene 2 is reported. Compound 3 is a monoalkylatedcalix[4]arene in the cone conformation. The X-ray structure of 3 showed that this conformation is stabilized by intramolecular hydrogen bonding.     

四硫脲基杯[4]芳烃衍生物的合成

对叔丁基杯[4]-1,3-二乙酸乙酯与过量的二乙基三胺反应,生成含有游离氨基的杯芳烃酰胺衍物(2),2再与异硫氰酸苯酯反应合成了含4个硫脲基的杯[4]芳烃衍生物,其结构经1H NMR,IR,MS和元素分析表征。     

Hydrogen bonding nature between calix[6]arene and piperidine/triethylamine

We investigated the binding nature of the 1,2,3-alternate calix[6]arene with one piperidine, two piperidines, and two triethyl amines with a special emphasis on the hydrogen bonding networks by density functional theory calculations. The 1,2,3-alternate calix[6]arene strongly binds with piperidines and triethylamines at two different binding sites, exo and endo sites. In the two binding sites, the hydrogen bonding nature shows a characteristic difference. In the exo site, there formed only one hydrogen bond, while in the endo site, two hydrogen bonds except for the triethylamine. The proton transfer within the hydrogen bonding and the hydrogen bonding types, normal hydrogen bonding (NHB), short strong hydrogen bond (SSHB), and low barrier hydrogen bonding (LBHB), will be discussed in detail.     

新型杯[4]芳烃衍生物的合成及其氨基酸萃取性能

杯[4]-1,3-二乙酸乙酯衍生物(1)与水合肼反应生成杯[4]芳烃酰肼衍生物(2),化合物(2)与异硫氰酸苯酯反应得到含酰胺和硫脲单元的新型杯[4]芳烃衍生物(3).总产率达70%.系列氨基酸萃取实验表明化合物(3)对异亮氨酸有较好的选择性萃取能力.     

2]Catenane assembly from calix[4]arene crown ethers [In Process Citation

A variety of novel calix[4]arene-incorporating crown ethers with or without intramolecular hydrogen bonding have been prepared by two efficient methods and utilized as donor rings to assemble calix[4]arene [2]catenanes based on pi-stacking interaction between hydroquinone and bipyridinium units. Treatment of calix[4]arene crown ethers 4, 10a, or 10b, whose cone conformation was fixed by intramolecular hydrogen bonding within the calix[4]arene moiety, with dicationic salt 15 x 2PF6 and dibromide 16 afforded the corresponding [2]catenanes 17a x 4PF6, 17b x 4PF6, and 17c x 4PF6 in 20%, 53%, and 55% yields, respectively, whereas from the reactions of 15 x 2PF6 and dibromide 16 in the presence of conformationally flexible 11 or 12 with a cone conformation kept by two propyl groups, [2]catenanes 18 x 4PF6 and 19 x 4PF6 were obtained in 12% and 6% yields. [2]Catenanes 21a x 4Cl, 21b x 4Cl, and 21c x 4Cl, incorporating calix[4]arene in both the donor and acceptor rings, were also successfully assembled from 10a or 10b, 16, and dicationic salts 20a x 2PF6 or 20b x 2PF6. The dynamic 1H NMR and absorption spectra of the [2]catenanes have been investigated, which revealed a strongest donor-acceptor interaction in 17a x 4PF6 and that the cone [2]catenanes 17a-c x 4PF6 can isomerize to the partial cone isomer at high temperature. The difference of the dynamic properties of these catenanes was discussed. The results demonstrate that catenation is one new general method to change the conformational distributions of calix[4]arenes.     

Effect of carboxylic acid on micelles of a neutral amphiphilic dendro-calix[4]arene

An amphiphilic calix[4]arene bearing branched 3,4,5-tris(2-(2-(2-methoxyethoxy)ethoxy)ethoxy)benzamide groups at the upper rim was synthesized and could increase the solubility of naproxen and ibuprofen in water through hydrogen bonding and π-π stacking interactions. The interactions between amphiphilic calix[4]arene and carboxylic acids such as naproxen and ibuprofen could reverse the direction of the branched substituents and change the shape and size of calixarene micelles from solid to hollow or linear ones.     

Proline–calixarene thiourea host–guest complex catalyzed enantioselective aldol reactions: from nonpolar solvents to the presence of water

A proline–calix[4]arene thiourea host–guest complex catalyzed intermolecular aldol reaction of aromatic aldehydes with cyclohexanone has been developed. The anti-configured products were obtained in good yields and with high enantioselectivities. The reaction is proposed to work via a modified Houk–List model, where the carboxylate part of the proline constitutes as a supramolecular system with the thiourea. The outcome of the study indicates the influence of the calix[4]arene thiourea on both the reactivity and selectivity in a non-polar reaction medium, even in the presence of water at moderate temperatures.     

X-ray guided H NMR analysis of pinched cone calix[4]arenes

The analysis of structural parameters of azobenzene- and stilbene-bridged calix[4]arene obtained from AM1 calculation are in good agreement with those obtained from X-ray crystallography. The bridge longer than 9.0 Å such as p,p-trans-azobenzene and p,p-trans-stilbene cannot be constructed over the narrow rim of calix[4]arene through two ethylene oxide linkers. The m,m-stilbene bridge is the most promising photo switch because its shorter cis stereoisomer (5.85 Å) allows calix[4]arene to assume the perfect cone conformation, whilst its longer trans stereoisomer (8.00 Å) forces calix[4]arene to adapt a pinched cone conformation. The pinched cone conformation has longer distances between the neighbouring phenoxyl groups causing the weaker intramolecular hydrogen bonding and the upfield shifts of the phenolic proton signals to below 7.00 ppm. This upfield shift is useful for quick identification of pinched cone conformation of new calix[4]arene compounds.     

一锅法合成含两种桥联链的杯[4]双冠醚和双杯[4]冠醚

报道了"一锅法"合成含两种桥联链的新型杯[4]双冠醚和双杯[4]冠醚.杯[4]芳烃先与N,N’-乙撑基-二(2-氯乙酰胺)发生"1+1"缩合反应,然后直接加入三甘醇双对甲苯磺酸酯继续进行"2+2"缩合反应,合成了含两种桥联链的新型双杯[4]冠醚4.按照相似程序,杯[4]芳烃先后与N,N’-乙撑基-二(2-氯乙酰胺)、溴乙酸乙酯和二乙烯三胺反应,得到含两种桥联链的新型杯[4]双冠醚5.化合物5进一步与异硫氰酸苯酯反应合成带硫脲支链的杯[4]双冠醚6.所有新化合物的结构与构象经元素分析、质谱、核磁共振谱等表征证实.     

A Biomimetic Heteroditopic Receptor for Zwitterions in Protic Media

The efficient synthesis of calix[6]cryptothiourea 6 was achieved through a two‐step sequence that involves a key [1+1] macrocyclization step. It was shown by NMR spectroscopy that this heteroditopic receptor can bind zwitterions in protic media with an outstanding selectivity for β‐alanine betaine G5 , which is likely due to a high complementarity between the two partners. This result constitutes a rare example of cavity complexation of a zwitterion by a calix[6]arene. In comparison with the parent urea‐based receptors, 6 behaves as a much more efficient host for betaines. This strengthening of the binding properties is due to the better preorganization of the tripodal hydrogen‐bonding cap as well as to the higher acidity of the thiourea groups and their poor ability to self‐associate. Remarkably, host 6 is able to perform solid–liquid as well as liquid–liquid extraction of G5 . Finally, 6 provides an excellent structural model for the binding site of glycine betaine G4 encountered in natural systems.     

Synthesis of Calix[4]arene Derivatives Containing a Nucleobase and their Interaction with Complementary Nucleosides at the Air–Water Interface

Amphiphilic calix[4]arene derivatives with a nucleobase on the lower rim have been synthesized in good yields by the condensation of calix[4]arenediamine {5,11,17,23-tetra-tert-butyl-25,27-bis(2-aminoethoxy)-26,28-dihydroxycalix[4]arene} with uracilo-N-acetic acid, thymino-N-acetic acid and adenino-N-propionic acid in the presence of CDI in DMF. Monolayers of the amphiphilic calix[4]arene-nucleobase derivatives on the surface of pure water, the aqueous subphases containing complementary nucleosides, were studied by film balance measurement and relaxation experiments. LB films deposited from all subphases were investigated by UV spectra and FT-IR spectroscopy. All the results indicate that the interaction between the nucleobases in the headgroup of amphiphilic p-tert-butylcalix[4]arene derivatives and the complementary nucleosides in the subphase takes place through multiple hydrogen bonding and the nucleosides can be transferred to solid substrates along with their monolayers.     

Functional modification,self-assembly and application of calix[4]resorcinarenes

As a special subset of calix[4]arene, calix[4]resorcinarene is an excellent molecular platform which could be modified by introducing functional groups to multiple sites at the upper and lower rims. There are mainly three ways to build functionalized calix[4]resorcinarene derivatives: (1) modification on the C-2 sites of calix[4]resorcinarenes; (2) modification on the phenolic hydroxyl groups of calix[4]resorcinarenes; (3) modification on the bridging methylenes at lower rim of calix[4]resorcinarenes. Functionalized calix[4]resorcinarene derivatives play an important role in the development of self-assembly chemistry, among which hydrogen bonding and metal coordination are the two most common interactions to obtain multicomponent structures. Moreover, due to the excellent topological structures and various active substituents of functionalized calix[4]resorcinarene derivatives, their applications in various fields, such as nanoparticles, catalysts, fluorescent materials, and sensors, have been briefly presented in this paper.

     

Aminolysis reaction of calix [ 4 ] arene esters and crystal structures and conformational behaviors of calix[4]arene amides

We first make use of aminolysis of calix[4]arene esters to synthesize calix[4]arene amides. When the two ethyl esters of the calix[4]arene esters are aminolysized, the 1, 3-amide derivative is formed selectively. The crystal structures of the calix-[4]arene with two butyl amide (3b) and four butyl amide moieties (4b) were determined. The intermolecular hydrogen bonds make 4b form two-dimensional net work insolid state. The 1H NMR spectra prove that 3b is of a pinched cone conformation, while 4b and tetraheptylamide-calix[4]arene (6b) take fast interconversion between two C2v isomers in solution and appear an apparent cone conformation at room temperature. As decreasing temperature, the interconversion rate decreases gradually and, finally, the interconversion process is frozen at Tc = -10℃, which makes both conformations of 4b and 6b the pinched cone structures. The hydrogen bond improves the interconversion barrier, and the large different values of the potential barrier between 6b and 4b (or 6b) may     

Competitive Self and Induced Aggregation of Calix[4]arene Ethers and Their Interaction with Pinacyanol Chloride and Methylene Blue in Nonaqueous Media

Long chain calix[4]arene ethers have been examined for aggregation in nonaqueous solvents by using UV-vis molecular absorbance spectroscopy. It has been observed that tetraalkylated (alkyl = hexadecyl and octadecyl, respectively) calix[4]arene ethers tend to aggregate in chloroform and tetrahydrofuran, possibly via π–π stacking interactions of the phenyl moieties, and the aggregation process appears to be facilitated by the alkyl chains. The analogous dialkylated compounds do not show any self-aggregation, plausibly due to strong hydrogen bonding between the –OH and the –O– of calix aryl ether which seems to disrupt the aggregation process. Addition of the anionic surfactant sodium dodecylsulfate (SDS) appears to hinder the aggregation process in nonpolar chloroform but the same surfactant facilitates aggregation in the polar tetrahydrofuran. The cationic surfactant (cetyltrimethyl ammonium bromide) and the nonionic surfactant (Brij-35) have no effect on this aggregation process. Unexpectedly, SDS induces aggregation of dialkylated calix[4]arene ethers in chloroform. It has been observed that the aggregated form of the tetraalkylated calix[4]arene ethers tend to increase the dimerization efficiency of cationic dyes (pinacyanol chloride and methylene blue) in chloroform.