A new method for the cleavage of nitrobenzyl amides and ethers

A mild and efficient o- and p-nitrobenzyl cleavage protocol was developed. o- and p-nitrobenzyl groups were easily removed from a variety of substrates using 20% aqueous NaOH in methanol at 75 °C, presumably via oxidation at the benzylic position by oxygen dissolved in the solution. These easily introducible and removable nitrobenzyl groups can serve as valuable protecting groups for the synthesis of multifunctional, complex molecules.     

Stereochemistry and reactivity of F- and H-vinyldiazocarbonyl compounds and their phosphazines: synthesis of pyrazoles and pyridazines

3-(Trifluoromethyl)-substituted (F) 2-vinyl-2-diazocarbonyl compounds, having cis-relationship of functional groups (AlkO₂C, CN₂), do not undergo 1,5-electrocyclization, but readily take part in the tandem Staudinger-diaza-Wittig reactions to produce trifluoromethyl-substituted pyridazines, whereas their non-fluorinated analogs (H), with trans-configuration, easily cyclize to pyrazoles, but remain intact under Staudinger-diaza-Wittig reaction conditions. The difference in the reactivity of H- and F-vinyldiazoketones, vinyldiazoacetates, and derived phosphazines is apparently caused by the different stereochemical arrangements of the AlkO₂C and CN₂ groups.     

Lithiation of 2-(chloroaryl)-2-methyl-1,3-dioxolanes and application in synthesis of new ortho-functionalized acetophenone derivatives

2-(4-Chlorophenyl)-2-methyl-1,3-dioxolane 2a was lithiated ortho to the ketal group by treatment with butyllithium in THF at 0°C. Related 2-aryl-2-methyl-1,3-dioxolanes possessing a chlorine substituent at the meta position of the aryl group 2b,c were lithiated with butyllithium in THF at −78°C at the position between the two directing groups. The lithio species thus generated were treated with various electrophiles to give ortho-functionalized acetophenone derivatives.     

Pd/C mediated synthesis of 2-substituted benzo[b]furans/nitrobenzo[b]furans in water

An efficient synthesis of 2-alkyl/aryl substituted benzo[b]furans/nitrobenzo[b]furans in water has been accomplished via Pd/C catalyzed reaction of o-iodophenols with terminal alkynes in the presence of PPh₃, CuI and prolinol. This method can tolerate a variety of functional groups present in the alkynes as well as base labile nitro group in the o-iodophenols. The protocol does not require the use of a phase transfer catalyst or water-soluble phosphine ligands and is free from the use of any organic co-solvent.     

Efficient partial hydrogenation of trichloromethyl to gem-dichloromethyl groups in platinum on carbon-catalyzed system

While gem-dichloromethyl groups can be directly synthesized by the mono-dechlorination of the corresponding trichloromethyl groups, the suppression control of the over-reduction to form chloromethyl or methyl functionalities is quite difficult. We have established the efficient and widely applicable mono-dechlorination method of the trichloromethyl groups to form the corresponding gem-dichloromethyl groups using platinum on carbon in dimethylacetamide as a specific solvent at 25 °C under a hydrogen atmosphere. The mono-dechlorination of the α,α,α-trichloromethylcarbonyl groups smoothly proceeded by the use of platinum on carbon as a catalyst in a highly chemoselective manner, while the efficient mono-dechlorination of the alkyl- and aryl-trichloromethyl groups required the combined use of Bu₃SnH.     

Acyclic tertiary diamines and 1,4,7,10-tetraazacyclododecane with fluorine-containing β-diketones: Leading to low melting ionic adducts

N,N,N′,N′-Tetramethylmethanediamine (1a), N,N,N′,N′-tetramethylethanediamine (1b), N,N,N′,N′-tetramethyl-1,3-propanediamine (1c), and N,N,N′,N′-tetramethyl-1,6-hexanediamine (1d) were reacted at 25 °C with 1,1,1,5,5,5-hexafluoro-2,4-pentanedione (2a), 2,2-dimethyl-6,6,7,7,8,8,8-heptafluoro-3,5-octanedione (2b), 2-thenoyltrifluoroacetone (2c), and 4,4,4-trifluoro-1-(2-furyl)-1,3-butanedione (2d) to form the ionic adducts 3-18. 1,4,7,10-Tetraazacyclododecane (1e) reacted at 25 °C with β-diketones (2a-d) and 1,1,1-trifluoro-2,4-pentanedione (2e) to give ionic solids 19-23 in good yields. Some of the products are liquid at 25 °C and are thermally stable over long liquid ranges as determined by thermal gravimetric analyses. Single-crystal X-ray structure determinations show that compounds 9 and 21 crystallize in the monoclinic space groups P2(1)/c and P2(1)/n, respectively. All the new compounds were characterized by ¹H, ¹⁹F and ¹³C NMR, electrospray MS and/or elemental analyses.     

X-ray crystal structure of the tetra(tert-butyl)erbate anion and attempts to prepare tetravalent organolanthanide complexes

The new [Li(DME)₃⁺] salt of the previously-known tetra(tert-butyl)erbate(III) anion [Er(t-Bu)₄⁻] has been prepared and structurally characterized. The erbium(III) center is ligated by four tert-butyl groups in an approximately tetrahedral arrangement. The C–Er–C angles between the tert-butyl groups range from 108.8(3)° to 111.2(3)° and the Er–C distances range from 2.352(6) to 2.395(6) Å. The lithium cation is surrounded by three DME molecules, which form a distorted octahedral coordination sphere. Attempts to oxidize the analogous terbate complex [Li(DME)₃][Tb(t-Bu)₄] and its cerium analog to electrically neutral tetra(alkyl)lanthanide(IV) compounds are described.     

Synthesis of N,N-dialkylaminobenzonitriles and halo-(N,N-dialkyl)benzamidines by reaction of halobenzonitriles with lithium amides

3- and 4-N,N-Dialkylaminobenzonitriles and 4-chloro-(N,N-dialkyl)benzamidines were isolated by reacting 4-chlorobenzonitrile with hindered lithium amides under thermodynamic (0 °C) and kinetic control conditions (−78 °C), respectively. As previously reported, a benzyne mechanism seems to be confirmed since N,N-dialkylaminobenzonitriles are formed. Only benzamidines were isolated in fair to high yields at both 0 °C and −78 °C with non-hindered lithium amides. Exploitation and mechanistic rationale of the reaction of different halobenzonitriles are also reported.     

A cyclopropanol approach to the synthesis of the C13-C21 fragment of epothilones from diethyl (S)-malate

A convenient new approach to the synthesis of the C13-C21 epothilone fragment using the cyclopropanation of the ethoxycarbonyl groups in O-THP protected diethyl (S)-malate with ethylmagnesium bromide in the presence of titanium(IV) isopropoxide followed by site-selective cyclopropane cleavage as the key steps has been performed.     

Synthesis and N-functionalization of isoxazolidines: a new approach to nucleoside analogues

A straightforward synthetic approach for the preparation of non N-functionalized isoxazolidines from BF₃-catalyzed 1,3-cycloaddition reactions between methyl glyoxylate oxime and alkenes is described. Subsequently, isoxazolidines were N-functionalized with three chemically active groups (2-chloroethyl, cyanomethyl and 2-acetoxyethyl), thus allowing the preparation of a wide array of N-functionalized isoxazolidines. The compounds were characterized by means of ¹H and ¹³C NMR spectroscopy and mass spectrometry. X-ray analysis was used for stereochemical elucidation.     

Bacterial polyesters grafted with poly(ethylene glycol): Behaviour in aqueous media

An easy method for grafting of poly(3-hydroxyoctanoate-co-3-hydroxyundecenoate) (PHOU) was developed. Oxidation of the pendant double bonds of PHOU into carboxyl groups to yield poly(3-hydroxyoctanoate-co-3-hydroxy-9-carboxydecanoate) (PHOD) and the esterification of the carboxyl side groups with poly(ethylene glycol) (PEG) were carried out in a single reaction solution. The grafting yield is dependent on the molar mass of the PEG graft. The maximum carboxyl group conversion (52%) was obtained with PEG M_n = 350 and decreased with increasing molar mass of PEG (19% for PEG M_n = 2000). Yields were determined by ¹H and ¹³C NMR. Short PEG grafts lowered the glass transition temperature (PHOD-g-PEG 350 −57 °C) compared to PHOD (−19 °C) and PHOU (−39 °C). This effect depends on the COOH conversion and PEG chain length. Grafting enhanced the hydrophilic character of the modified polymers making them soluble in polar solvents, such as alcohols and water/acetone mixtures. PHOD-g-PEG films were more stable towards hydrolytic degradation as PHOD films. No obvious modification of films was observed after more than 200 days at pH 7.2 and 37 °C. The molar mass of the grafted polymers decreased only slightly during this period, while PHOD films were hydrolyzed into soluble fragments.     

Ozonolysis of bis-endo-diacylbicyclo[2.2.1]heptenes in dichloromethane-methanol

Ozonolysis of bis-endo-diacylbicyclo[2.2.1]heptenes 3a-d at −78 °C in dichloromethane-methanol gave the hydroperoxides 6a-d in 70-80% yields. Ozonolysis of bis-endo-diacetylbicyclo[2.2.2]octene 15 and bis-endo-diacetyl-7-oxabicyclo-[2.2.1]heptene 16 under the same reaction conditions gave the hydroperoxides 17 and 18, respectively. The intramolecular sequential nucleophilic addition of the carbonyl groups to the carbonyl oxide group was observed for the first time and was found to be faster than the intermolecular nucleophilic addition of a methanol molecule to the carbonyl oxide group. Ozonolysis of compound 23 in CH₂Cl₂-MeOH at −78 °C followed by reduction with Me₂S gave compounds 24 and 25, in which the stereochemistry of the methoxyl groups was determined by X-ray analysis.     

New N,N-amino-diphosphonate-containing methacrylic derivatives, their syntheses and radical copolymerizations with MMA

Hydroxy-amino-diphosphonates HO-C_n-NH₂, with 2 ? n ? 11, have been successfully synthesized via the Kabachnick-Field reaction at 70 °C with high yields. These hydroxy compounds are then reacted with methacryloyl chloride to lead to novel amino-diphosphonate methacrylates MAC_nNP₂ (with 2 ? n ? 11). These highly pure methacrylate monomers were obtained with yields higher than 75%. Radical copolymerizations of MAC_nNP₂ (with 2 ? n ? 11) with MMA have been conducted and the r₁ values (related to MAC_nNP₂) are in the range of 1.1-1.3, and r₂ values (related to MMA) about 0.8; this shows that the diphosphonate groups are statistically bonded to the methacrylic backbone.     

A novel P,S-heterodonor ligand and palladium(0) complex catalyzed Suzuki cross-coupling reaction

Axially dissymmetric P,S-heterodonor ligand L3 synthesized from BINOL is an effective promoter in the palladium(0)-catalyzed Suzuki cross-coupling reaction of phenylboronic acid with aryl bromides and iodide at 60-80 °C. On the basis of ¹³C and ³¹P NMR spectroscopic investigation and X-ray diffraction, it was revealed that N,N-dimethylthiocarbamate-phosphine ligand L3 might be a P,S-heterodonor bidentate ligand to palladium(0) center.     

Synthesis of highly substituted meso-tetraarylporphyrins

meso-Tetraphenylporphyrin (and its derivatives), in the reaction with fuming yellow nitric acid (d=1.53), form either 5-(4-nitroaryl)-10,15,20-triarylporphyrin, 5,10-bis(4-nitroaryl)-15,20-diarylporphyrin, or 5,10,15-tris(4-nitroaryl)-20-arylporphyrin, depending on the reaction temperature (0-20 °C), amounts of the acid used, and reaction time. The above nitroporphyrins react, in the presence of a base (t-BuOK) at 0 °C, with carbanions (which bear nucleophugal groups at the carbanionic center: ⁻CH(Cl)SO₂Tol, ⁻CH(Br)SO₂Tol, and ⁻CH(Cl)SO₂NMe₂), leading to the nucleophilic substitution of hydrogen in one or more of the meso-nitroaryl rings. By this route, the preparation of the highly substituted ‘synthetic’ porphyrins (bearing up to ten O-, N-, Cl-, or C-substituents) was demonstrated.     

Preparation of telechelic oligomers by controlled thermal degradation of isotactic poly(1-butene) and poly(propylene-ran-1-butene)

It was found that telechelic isotactic oligo(1-butene) and telechelic oligo(propylene-ran-1-butene) could be isolated as nonvolatile oligomers from polymer residues resulting from the thermal degradation of isotactic poly(1-butene) and poly(propylene-ran-1-butene), respectively. Their structures were determined by ¹H and ¹³C NMR with attention being paid to their reactive end groups. The maximum average number of terminal vinylidene groups per molecule (f_TVD) was 1.8, indicating that about 80 mol% were α,ω-diene oligomers having two terminal vinylidene groups. This useful new telechelic oligomer had a lower polydispersity than the original polymer, in spite of its lower molecular weight and T_m. The composition of end groups of nonvolatile oligomers obtained by thermal degradation of poly(propylene-ran-1-butene) could be explained by the differences in bond dissociation energy and activation energy of elementary reactions during thermal degradation, based on the monomer composition of the original polymer.     

Dynamic molecular recognition in the generation of a new crystal-engineering motif: a unique case study of a dicarboxylic acid with a ditopic receptor favouring a polymeric over a dimeric hydrogen-bonded supramolecular complex

A new crystal-engineering motif has been developed where a ditopic receptor 1 shows a novel syn-syn hydrogen-bonded polymeric supramolecular complex (Fig. 4b) (instead of a 1:1 dimeric syn-syn or polymeric syn-anti complex) giving rise to a hydrogen-bonded stair-like polymeric ribbon structure between the binding groups of the receptor pyridine amide and the carboxyl groups of the guest substrate.     

Cytosporones O, P and Q from an endophytic Cytospora sp.

Cytosporones O, P and Q, together with the known compounds cytosporones B, C, D, E and dothiorelones A, B, C, and H were isolated from the ascomycete fungus Cytospora sp. during a chemotaxonomic study of fungal endophytes belonging to the related genera Cytospora and Phomopsis from Brazil. The structures were determined by NMR spectroscopy and mass spectrometry. With exception of cytosporones D, E, Q, and dothiorelone B, all compounds were consistently detected in the metabolite profiles of eight Cytospora isolates investigated; and were also produced by a distinct chemotype of Phomopsis.     

Validation of an online dual-loop cleanup device with an electrospray ionization tandem mass spectrometry-based system for simultaneous quantitative analysis of urinary benzene exposure biomarkers trans, trans-muconic acid and S-phenylmercapturic acid

The aim of this study is to validate isotope-dilution electrospray ionization tandem mass spectrometry (ESI-MS-MS) method with a dual-loop cleanup device for simultaneous quantitation of two benzene metabolites, trans, trans-muconic acid (ttMA) and S-phenylmercapturic acid (SPMA), in human urine. In this study, a pooled blank urine matrix from rural residents was adopted for validation of the analytical method. The calibration curve, detection limit, recovery, precision, accuracy and the stability of sample storage for the system have been characterized. Calibration plots of ttMA and SPMA standards spiked into two kinds of urine matrixes over a wide concentration range, 1/32-8-fold biological exposure indices (BEIs) values, showed good linearity (R > 0.9992). The detection limits in pooled urine matrix for ttMA and SPMA were 1.27 and 0.042 μg g⁻¹ creatinine, respectively. For both of ttMA and SPMA, the intra- and inter-day precision values were considered acceptable well below 25% at the various spiked concentrations. The intra- and inter-day apparent recovery values were also considered acceptable (apparent recovery >90%). The ttMA accuracy was estimated by urinary standard reference material (SRM). The accuracy reported in terms of relative error (RE) was 5.0 ± 2.0% (n = 3). The stability of sample storage at 4 or −20 °C were assessed. Urinary ttMA and SPMA were found to be stable for at least 8 weeks when stored at 4 or −20 °C. In addition, urine samples from different benzene exposure groups were collected and measured in this system. Without tedious manual sample preparation procedure, the analytical system was able to quantify simultaneously ttMA and SPMA in less than 20 min.     

Synthesis and phase separation of amine-functional temperature responsive copolymers based on poly(N-isopropylacrylamide)

Free radical copolymerizations of N-isopropyl acrylamide (NIPAM) and cationic N-(3-aminopropyl) methacrylamide hydrochloride (APMH) were investigated to prepare amine-functional temperature responsive copolymers. The reactivity ratios for NIPAM and APMH were evaluated in media of different ionic strength (r_NIPAM = 0.7 and r_APMH = 0.7-1.2). Phase separation behavior of the random copolymers with only 5 mol% of the APMH was found to be suppressed in pure water at temperatures up to 45 °C due to electrostatic repulsion among the cationic amine groups randomly distributed along the copolymer chain. Alternate sequential addition of PNIPAM/APMH mixtures and pure NIPAM was used to provide increased control of the location of APMH units along the chain. Consequently (close to) homo-PNIPAM block(s) were formed as evidenced by its characteristic phase transition at 33 °C. The influences of the monomer feeding time and feeding interval time to the APMH distribution were investigated to prepare copolymers with thermo-induced phase separation under physiologically relevant temperature and to determine the extent of conjugation to poly(ethylene oxide).