Suppression of lift fluctuations on a circular cylinder by inducing the symmetric vortex shedding mode

The flow around a stationary circular cylinder modified by two synthetic jets positioned at the mean separation points is numerically studied. The Reynolds number based on the free-stream velocity and the circular cylinder diameter is Re=500. The focus is to present a novel way to suppress the lift fluctuations by changing the vortex shedding mode, and thus particular attention is paid to the interactions between the synthetic jets and wake shear layers and the resulting vortex dynamics. The overall influences of both momentum coefficient and excitation frequency are discussed. In some simulated cases, the vortex lock-on phenomenon is discovered, which causes the typical Kàrmàn type vortex shedding to be converted into the symmetric shedding modes, leading to the complete suppression of lift fluctuations. In other cases, the asymmetric shedding mode still dominates the wake evolution. Detailed vortical evolution for each typical wake pattern is analyzed to reveal the control mechanism. Additionally, the control effectiveness is evaluated, indicating that the present control strategy contributes an effective way to suppress the lift fluctuations and reduce the mean drag.     

Wall proximity effects on the effectiveness of upstream control rod

Two dimensional flow over a circular cylinder with an upstream control rod of same diameter is simulated in unbound condition and in wall bounded conditions. The cylinders are placed at various heights from the wall and the inter-distance between cylinders is also varied. The control rod is subjected to different rotation rates. It is found that, in unbound condition, rotating the control rod decreases the critical pitch length (S/D_cr) and increases the drag and Strouhal number of the main cylinder. In presence of plane wall, the shielding provided by the separated shear layers from the control rod in cavity regime is deteriorated due to deflection of shear layers which results in higher drag and large fluctuation of lift coefficient. However, in wake impingement regime, the binary vortices from the control rod are weakened due to diffusion of vorticity and hence, the main cylinder experiences a lower drag and small lift fluctuations than that of unbound condition. The critical height of vortex suppression (H/D_cr) is higher in cavity regime than that of wake impingement regime due to the single extended-bluff body like configuration. The rotation of control rod energizes the wall boundary layer and increases the critical height of vortex suppression. Increasing the rotational rate of control rod decreases the drag force and reduces the amplitude of lift fluctuation. Analysis of the wall shear stress distribution reveals that it suffers a sudden drop at moderate height where the normal Karman vortex shedding changes to irregular shedding consisting of single row of negative vortices. Modal structures obtained from dynamic mode decomposition (DMD) reveal that the flow structures behind the main cylinder are suppressed due to wall and the flow is dominated by the wake of control rod.     

Passive control of wake flow by two small control cylinders at Reynolds number 80

Passive control of the wake behind a circular cylinder in uniform flow is studied by numerical simulation at Re_D=80. Two small control cylinders are placed symmetrically along the separating shear layers at various stream locations. In the present study, the detailed flow mechanisms that lead to a significant reduction in the fluctuating lift but maintain the shedding vortex street are clearly revealed. When the stream locations lie within 0.8≤X_C/D≤3.0, the alternate shedding vortex street remains behind the control cylinders. In this case, the symmetric standing eddies immediately behind the main cylinder and the downstream delay of the shedding vortex street are the two primary mechanisms that lead to a 70–80% reduction of the fluctuating lift on the main cylinder. Furthermore, the total drag of all the cylinders still has a maximum 5% reduction. This benefit is primarily attributed to the significant reduction of the pressure drag on the main cylinder. Within X_C/D>3.0, the symmetry of the standing eddy breaks down and the staggered vortex street is similar to that behind a single cylinder at the same Reynolds number. In the latter case, the mean pressure drag and the fluctuating lift coefficients on the main cylinder will recover to the values of a single cylinder.     

单窄条控制件对横向振荡柱体尾流 2P模式 旋涡脱落的改变

横向强迫振荡柱体尾流控制是柱体涡激振动控制的基础,在海洋、土木等工程中具有重要意义. 横向强迫振荡柱体尾流中存在一种锁频旋涡脱落模式,即在一个振荡周期内柱体上、下侧各脱落旋转方向相反的一对涡,称为2P模式. 本文将相对宽度b/D=0.32的窄条控制件置于横向强迫振荡柱体下游,对振幅比A/D=1.25, 无量纲振频f_e D/V_∞=0.22,雷诺数Re=1 200的2P模式旋涡脱落进行干扰,并通过改变控制件位置,研究旋涡的变化规律. 采用二维大涡模拟和实验验证方法进行研究,在控制件位置范围0.8≤X/D≤3.2, 0.4≤Y/D≤3.2内,得到了2P, 2S, P+S和另外6种新发现的旋涡脱落模式,并对各模式旋涡的形成过程作了详细描述. 在控制件位置平面上给出了各旋涡模式的存在区域,画出了旋涡脱落强度的等值线图,并发现在一个相当大的区域内,旋涡脱落强 度可减小一半以上,尾流变窄. 发现柱体大幅振荡引起的横向剪切流在旋涡生成中起关键作用. 探讨了控制件对横向剪切流的影响,分析了控制件在每种旋涡模式形成中的作用机制.      

Effect of buoyancy on the wakes of circular and square cylinders: a schlieren-interferometric study

Wakes behind heated cylinders, circular, and square have been experimentally investigated at low-Reynolds numbers. The electrically heated cylinder is mounted in a vertical airflow facility such that buoyancy aids the inertia of main flow. The operating parameters, i.e., Reynolds number and Richardson number are varied to examine flow behavior over a range of experimental conditions from forced to mixed convection regime. Laser schlieren-interferometry has been used for visualization and analysis of flow structures. Complete vortex shedding sequence has been recorded using a high-speed camera. The results on detailed dynamical characteristics of vortical structures, i.e., their size, shape and phase, Strouhal number, power spectra, convection velocity, phase shift, vortex inception length, and fluctuations are reported. On heating, alteration of organized (coherent) structures with respect to shape, size and their movement is readily perceived from instantaneous Schlieren images before they reduce to a steady plume. For both cylinders, Strouhal number shows a slow increase with an increase in Richardson number. At a critical value, there is complete disappearance of vortex shedding and a drop in Strouhal number to zero. The corresponding spectra evolve from being highly peaked at the vortex shedding frequency to a broadband appearance when vortex shedding is suppressed. The geometry of vortex structures transforms to a slender shape before shedding is suppressed. At this heating level, absence of multiple peaks in power spectra at cylinder centerline indicates absence of interaction between opposite shear layers. The convection velocity of vortices increases in stream wise direction to an asymptotic value and its variation is a function of Richardson number. The convection speed abruptly falls to zero at critical Richardson number. The phase difference of shed vortices between upstream and downstream location increases with an increase in Richardson number. Velocity profiles show an increase in fluid speed and beyond the critical point, buoyancy forces add enough momentum to cancel momentum deficit due to the cylinder. Overall, the combined effect of temperature gradient on the separating shear layer velocity profile in near field and vortical structures interaction in far field influences wake instability of a heated cylinder. Electronic supplementary material The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Wake dynamics of external flow past a curved circular cylinder with the free-stream aligned to the plane of curvature

The fundamental mechanism of vortex shedding past a curved cylinder has been investigated at a Reynolds number of 100 using three-dimensional spectral/hp computations. Two different configurations are presented herein: in both cases the main component of the geometry is a circular cylinder whose centreline is a quarter of a ring and the inflow direction is parallel to the plane of curvature. In the first set of simulations the cylinder is forced to transversely oscillate at a fixed amplitude, while the oscillation frequency has been varied around the Strouhal value. Both geometries exhibit in-phase vortex shedding, with the vortex cores bent according to the body's curvature, although the wake topology is markedly different. In particular, the configuration that was found to suppress the vortex shedding in absence of forced motion exhibits now a primary instability in the near wake. A second set of simulations has been performed imposing an oscillatory roll to the curved cylinder, which is forced to rotate transversely around the axis of its bottom section. This case shows entirely different wake features from the previous one: the vortex shedding appears to be out-of-phase along the body's span, with straight cores that tend to twist after being shed and manifest a secondary spanwise instability. Further, the damping effect stemming from the transverse planar motion of the part of the cylinder parallel to the flow is no longer present, leading to a positive energy transfer from the fluid to the structure.     

FEEDBACK CONTROL OF VORTEX SHEDDING FROM A CIRCULAR CYLINDER BY ROTATIONAL OSCILLATIONS

The present paper describes a new active method for controlling vortex shedding from a circular cylinder in a uniform flow at medium Reynolds numbers. It uses rotary cylinder oscillations controlled by the feedback signal of a reference velocity in the cylinder wake. The effectiveness of this feedback control is evaluated by measuring the response of mean and fluctuating velocities in the cylinder wake, the spanwise correlation, the power spectrum, and the fluid forces acting on the cylinder. It is found that the velocity fluctuations and the fluid forces are both reduced by the feedback control with optimum values of the phase lag and feedback gain. The simultaneous flow visualization synchronized with the cylinder oscillation indicates the attenuation as well as the mechanisms of vortex shedding under the feedback control, which is due to the dynamic effect of cylinder oscillation on the vortex formation.     

圆柱绕流的电磁控制

流体绕过非流线物体时，在物体尾部形成涡街，使其表面周期性变化的阻力和升力增加，从而导致物体振荡，产生噪音。本文通过实验和计算，研究圆柱绕流的电磁控制，阐述浸于弱电介质溶液中，表面包覆电磁激活板的圆柱，在电磁力作用下的流体控制原理，讨论电磁力的消涡、减阻和减振过程。     

NEURAL NETWORK CONTROL OF VORTEX SHEDDING FROM A CIRCULAR CYLINDER USING ROTATIONAL FEEDBACK OSCILLATIONS

The performance of active control of vortex shedding from a circular cylinder is studied experimentally with rotational feedback oscillations. The optimization of the control parameters, such as the phase lag, the feedback gain, and the position of reference sensor are carried out using neural networks to minimize the reference velocity fluctuations in the cylinder wake. Measurement of pressure distributions over the circular cylinder under the optimum control indicate that the drag force is reduced by 16% and the lift force is suppressed by more than 70% in comparison with the stationary cylinder.     

Numerical simulation of Reynolds number effects on velocity shear flow around a circular cylinder

Three-dimensional Direct Numerical Simulation (DNS) and Large Eddy Simulation (LES) are performed to investigate the shear effects on flow around a circular cylinder at Reynolds numbers of Re=60–1000. The shear parameter, β, which is based on the velocity gradient, cylinder diameter and upstream mean velocity at the center plane of the cylinder, varies from 0 to 0.30. Variations of Strouhal number, drag and lift coefficients, and unsteady wake structures with shear parameter are studied, along with their dependence on Reynolds number. The presented simulation provides detailed information for the flow field around a circular cylinder in shear flow. This study shows that the Strouhal number exhibits no significant variation with shear parameter. The stagnation point moves to the high-velocity side almost linearly with shear parameter, and this result mainly influences the aerodynamic forces acting on a circular cylinder in shear flow. Both the Reynolds number and shear parameter influence the movement of the stagnation point and separation point. Mode A wake instability is suppressed into parallel vortex shedding mode at a certain shear parameter. The lift force increases with increasing shear parameter and acts from the high-velocity side to the low-velocity side. In addition, a simple method to estimate the lift force coefficient in shear flow is provided.     

Vortex shedding flow behind a slowly rotating circular cylinder

This paper investigates flow past a rotating circular cylinder at 3600?Re?5000 and α?2.5. The flow parameter α is the circumferential speed at the cylinder surface normalized by the free-stream velocity of the uniform cross-flow. With particle image velocimetry (PIV), vortex shedding from the cylinder is clearly observed at α<1.9. The vortex pattern is very similar to the vortex street behind a stationary circular cylinder; but with increasing cylinder rotation speed, the wake is observed to become increasing narrower and deflected sideways. Properties of large-scale vortices developed from the shear layers and shed into the wake are investigated with the vorticity field derived from the PIV data. The vortex formation length is found to decrease with increasing α. This leads to a slow increase in vortex shedding frequency with α. At α=0.65, vortex shedding is found to synchronize with cylinder rotation, with one vortex being shed every rotation cycle of the cylinder. Vortex dynamics are studied at this value of α with the phase-locked eduction technique. It is found that although the shear layers at two different sides of the cylinder possess unequal vorticity levels, alternating vortices subsequently shed from the cylinder to join the two trains of vortices in the vortex street pattern exhibit very little difference in vortex strength.     

Vortex motions in stratified wake flows

The vortex wakes of obstacles (circular cylinder and sphere) moving through a linearly stratified fluid have been investigated, by means of flow visualization, at Reynolds numbers smaller than 800 and non-dimensional buoyancy frequencies smaller than 6. Vortex shedding from a horizontally suspended circular cylinder is suppressed when the fluid is stratified. The wake of a sphere is affected by lee waves when the Reynolds number exceeds about 200.     

The PELskin project: part IV—control of bluff body wakes using hairy filaments

The passive control of bluff body wakes using a sparse layer of elastic hairy filaments has been investigated via a series of numerical simulations and compared to selected experiments under well-controlled boundary conditions. It has been found that a distribution of filaments spaced half of the dominant three dimensional instability and resonating with the main shedding frequency can drastically delay the three dimensional transition of the wake behind a circular cylinder. It will also be shown that when using a pair of rows of filaments symmetrically spaced by an azimuthal angle, the wake topology can be deeply affected as well as the value of the integral force coefficients of the cylinder. In the most favourable case, a coupled three dimensional transition delay and strongly reduced values of the drag and of the lift fluctuation can be simultaneously achieved. These results hold also for higher Reynolds-number flows as shown in experiments on a cylinder with hairy flaps attached to the aft part. The lock-in effect of structural vibration of the flaps with the vortex shedding is assumed to be the reason for a sudden change in the shedding cycle as soon as the motion amplitude is high enough to modify the wake. In line with this hypothesis, it has been demonstrated that a long elastic filament pinned on the centerline of a forced spatially developing mixing layer can interact with the vortex dynamics delaying the pairing process-leading to a reduced thickness of the layer. These findings show that a properly designed fluid structure interaction can indeed lead to technological benefits in terms of wake control: drag reduction, vibration control and possibly palliation of aeroacoustic emissions.     

Symmetric vortex shedding in the near wake of a circular cylinder due to streamwise perturbations

Symmetric perturbations imposed on cylinder wakes may result in a modification of the vortex shedding mode from its natural antisymmetric, or alternating, to a symmetric one where twin vortices are simultaneously shed from both sides of the cylinder. In this paper, the symmetric mode in the wake of a circular cylinder is induced by periodic perturbations imposed on the in-flow velocity. The wake field is examined by PIV and LDV for Reynolds numbers about 1200 and for a range of perturbation frequencies between three and four times the natural shedding frequency of the unperturbed wake. In this range, a strong competition between symmetric and antisymmetric vortex shedding occurs for the perturbation amplitudes employed. The results show that symmetric formation of twin vortices occurs close to the cylinder synchronized with the oscillatory component of the flow. The symmetric mode rapidly breaks down and gives rise to an antisymmetric arrangement of vortex structures further downstream. The downstream wake may or may not be phase-locked to the imposed oscillation. The number of cycles for which the symmetric vortices persist in the near wake is a probabilistic function of the perturbation frequency and amplitude. Finally, it is shown that symmetric shedding is associated with positive energy transfer from the fluid to the cylinder due to the fluctuating drag.     

Feedback control of vortex shedding from a circular cylinder

This paper presents an experimental study on the suppressing of vortex shedding from a circular cylinder by feedback sound. Experiments were performed in a wind tunnel, and the feedback sound was generated inside the cylinder and locally introduced into the flow through a thin slit on the cylinder surface. In this way, the shear flow nearest to the slit was directly manipulated during the control. The results show that the suppression of vortex shedding can be achieved at Reynolds numbers ranging from 4×10³ to 1.3× 10⁴, according to signals from a hot-wire checking throughout the wake and signals from a remote microphone. This local and one-sided feedback, being different from other control techniques, allows a better understanding of the control mechanism, which in this case probably causes a destructive interaction between two shear flows separated from both sides of the cylinder. The technique has been useful to deepen our understanding to the wake instabilities behind the cylinder.This work was done when the author was a visiting Scientist at the Institute of Technical Acoustics, Technical University Berlin. The author wishes to express his gratitude to Prof. M. Heckl and Prof. M. Möser for the arrangement and encouragement in this research. The help from Mr. M. Hansen in the experiment is acknowledged. Thanks also go to the German Science Foundation for the financial support.     

A note on the numerical simulations of flow past a wavy square-section cylinder

The flow past a square-section cylinder with a geometric disturbance is investigated by numerical simulations. The extra terms, due to the introduction of mapping transformation simulating the effect of disturbance into the transformed Navier-Stokes equations, are correctly derived, and the incorrect ones in the previous literature are pointed out and analyzed. Furthermore, the relationship between the vorticity, especially on the cylinder surface, and the disturbance is derived and explained theoretically. The computations are performed at two Reynolds numbers of 100 and 180 and three amplitudes of waviness of 0.006, 0.025 and 0.167 with another aim to explore the effects of different Reynolds numbers and disturbance on the vortex dynamics in the wake and forces on the body. Numerical results have shown that, at the mild waviness of 0.025, the Kairmain vortex shedding is suppressed completely for Re = 100, while the forced vortex dislocation is appeared in the near wake at the Reynolds number of 180. The drag reduction is up to 21.6% at Re = 100 and 25.7% at Re = 180 for the high waviness of 0.167 compared with the non-wavy cylinder. The lift and the Strouhal number varied with different Reynolds numbers and the wave steepness are also obtained.     

Experimental investigation of cavitating structures in the near wake of a cylinder

An experimental investigation of cavitating structures in the near-wake region of a cylinder is presented. From high-speed imaging of this subcritical flow (Reynolds number of 64,000), it is found that inception of cavities occurs in the shear layer. At the developed cavitation condition, the cavities in the separated zone and the free shear layer merge. A distinct spanwise variation in cavitation activity is observed. The non-dimensionalized correlation length at inception varies from close to a non-cavitating value of about 3.5 to about 1 at developed cavitation. The non-dimensionalized length of formation, characterized by crossover of the free shear layer and the wake axis, increases from 1 to 1.8 as the cavitation number is reduced from 85% to 50% of the inception value. A frequency analysis of the cavity dynamics indicates that although the vortex shedding frequency is dominant in the shear layer, there are peaks corresponding to other frequencies in other flow regions. The presence of a sharp peak at 125 Hz, corresponding to a Strouhal number of 0.2, along with a range of frequencies, is also verified independently through measurement of fluctuating pressure at the cylinder surface.     

Experimental investigation of a circular radially deforming cylinder near wake using an infrared technique

The present experimental study aims at developing a method to control the circular cylinder near wake by radial deformation and understand the underlying physics. Using an infra-red camera, we examine the temperature distribution of the near wake center line of a sinusoidal law radially deforming circular cylinder. From these measurements, the near wake is characterized by the length of the recirculation zone, the vortex formation zone length, the temperature fluctuation maximum intensity and the vortex street shedding frequency. For several deformations frequencies, we study the radial deformation influence on the near wake characteristics. It is noted that the wake structure is strongly affected by the deformation frequency. Among other things, we note the recirculation zone length reduction and the vortex formation zone length reduction when the radial vibrations are close to the “Lock-in” fundamental range. It is also noted that the variations of the vortex shedding frequency depend on the deformation frequency.     

Control of mean and fluctuating forces on a circular cylinder at high Reynolds numbers

A narrow strip is used to control mean and fluctuating forces on a circular cylinder at Reynolds numbers from 2.0 × 10⁴ to 1.0 × 10⁵. The axes of the strip and cylinder are parallel. The control parameters are strip width ratio and strip position characterized by angle of attack and distance from the cylinder. Wind tunnel tests show that the vortex shedding from both sides of the cylinder can be suppressed, and mean drag and fluctuating lift on the cylinder can be reduced if the strip is installed in an effective zone downstream of the cylinder. A phenomenon of mono-side vortex shedding is found. The strip-induced local changes of velocity profiles in the near wake of the cylinder are measured, and the relation between base suction and peak value in the power spectrum of fluctuating lift is studied. The control mechanism is then discussed from different points of view. The project supported by the National Natural Science Foundation of China (10172087 and 10472124). The English text was polished by Yunming Chen.     

双旋转附属圆柱对主圆柱尾流控制的影响

基于Fluent 软件平台,采用数值模拟方法对非稳态圆柱体结构尾流流动特性进行了研究．对在Re = 50~200范围内,双旋转附属圆柱的转速对主圆柱体尾流流动特性的影响进行了分析．研究结果表明：随着附属圆柱旋转速率的增加,主圆柱体表面所受阻力系数平均值与均方根值、升力系数均方根值均会减小．同时,旋转速率的变化对柱体结构表面压力分布的影响显著,压力系数在附属圆柱的位置产生了跳跃性变化．另外,当附属圆柱转速达到临界值时,尾流涡街变窄,涡脱落现象消失,并且系统的能量效率到达最佳状态．